EP20K600CB652C7 - APEX 20K 600K Gates FPGA | Altera | BGA-652
料号： EP20K600CB652C7 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1807.81 | $1,807.81 |
| 10 | $1690 | $16,900.00 |
| 100 | $1550 | $155,000.00 |
| 500 | $1420 | $710,000.00 |
| 1,000 | $1320 | $1,320,000.00 |
EP20K600CB652C7 概述
A Field Programmable Gate Array (FPGA) is a programmable logic device (PLD) that uses a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells to implement arbitrary digital circuits. FPGAs sit hierarchically under programmable logic, alongside CPLDs, and above fixed-function ASICs in the silicon IP taxonomy. The APEX 20K family specifically pioneered MultiCore™ architecture, embedding both look-up-table logic and dual-port RAM in each logic element, eliminating the need for external memory in many designs.
Key features include 24,320 logic elements, 311,296 embedded RAM bits, 488 user I/Os, and a maximum toggle frequency of approximately 375.94 MHz. The device uses a 1.8V core supply with MultiVolt™ I/O support for interfacing to 1.8V, 2.5V, 3.3V, and 5V systems. The MultiCore™ architecture combines LUT logic with embedded system blocks (ESBs), enabling on-chip implementation of FIFO buffers, CAM, and RAM without consuming general-purpose gates.
The APEX 20K device family delivers 25-35% faster design performance than competing CPLD/FPGA devices of its generation while consuming lower power through high-performance copper interconnect. The 652-ball BGA package is pin-compatible with the APEX 20KE family, giving designers a migration path to higher-density or enhanced-feature parts without PCB redesign. The device is fabricated using an all-layer copper interconnect process for improved speed and reliability.
Typical applications include high-speed digital signal processing, telecom switching fabrics, network routers, video processing pipelines, and ASIC prototyping where 600K system gates of programmable logic are required. The 488 user I/Os make it suitable for memory-rich designs interfacing to external DDR SRAM or SDRAM banks.
When designing with this device, note that the APEX 20K series has been superseded by Stratix and Cyclone families. Existing designs should consider migration to EP20K600CB652C8 or later speed-grade variants only after verifying pin compatibility. The 652-ball BGA requires controlled-impedance PCB stack-up with matched-length traces for the global clock network.
This page synthesizes distributor pricing, datasheet specifications, drop-in alternatives, and practical design notes not found in the original Altera datasheet, providing a comprehensive engineering reference for the EP20K600CB652C7.
直接替换替代料： EP20K600CB652C7 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP20K600CB652C7 （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Process Technology, Propagation Delay, Speed Grade.
快速对比工具——选择替代料号进行并排对比：
EP20K600CB652C7
✅ 直接替换✓ 有现货
$1320 / 个
查看数据手册 →EP20K600CB652C-8
✅ 直接替换✓ 有现货
$86 / 个
查看数据手册 →EP20K400CB652C7ES
✅ 直接替换✓ 有现货
$215 / 个
查看数据手册 →EP20K400CB652C8N
✅ 直接替换✓ 有现货
$155 / 个
查看数据手册 →EP20K400CB652C9
✅ 直接替换✓ 有现货
$89.2 / 个
查看数据手册 →EP20K400CB652I7
✅ 直接替换✓ 有现货
$149.5 / 个
查看数据手册 →EP20K400CB652I8N
✅ 直接替换✓ 有现货
$115 / 个
查看数据手册 →EP20K600CB652C7 最大额定值与电气特性
| Series | APEX 20K |
| Family | APEX 20KC |
| System Gates | 600,000 |
| Logic Elements | 24,320 |
| Embedded RAM | 311,296 bits |
| User I/O Count | 488 |
| 封装 | 652-ball BGA |
| Process Technology | 0.15 µm CMOS (all-layer copper interconnect) |
| Core Voltage | 1.8 V |
| I/O Voltage Support | 1.8V / 2.5V / 3.3V / 5V (MultiVolt) |
| Maximum Frequency | 375.94 MHz |
| Architecture | MultiCore (LUT + embedded memory) |
| 工作温度 | Commercial (0C to +70C) |
| Speed Grade | C7 |
EP20K600CB652C7 652-ball bga 引脚配置指南
EP20K600CB652C7（652-ball bga 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EP20K600CB652C7.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP20K600CB652C7 适用于 6 应用s: Telecom Switching Fabric, ASIC Prototyping Platform, High-Speed DSP Pipeline, Network Router Backplane Interface, Industrial Automation Controller, Video Processing Subsystem.
Telecom Switching Fabric
The EP20K600CB652C7's 600K system gates and 488 user I/Os make it well-suited for telecom switching fabrics requiring high-density parallel data routing. Its MultiCore architecture integrates LUT logic with 311,296 bits of embedded RAM, enabling on-chip packet buffer FIFOs without external memory. At 375.94 MHz maximum frequency, the device handles OC-48/STM-16 line card processing while the 652-ball BGA provides sufficient I/O for 16-bit parallel bus interfaces to network processors and traffic managers.
推荐
ASIC Prototyping Platform
With 24,320 logic elements and 311K bits of embedded memory, the EP20K600CB652C7 served as an ASIC prototyping vehicle for designs targeting 0.18µm ASIC processes. Its 652-ball BGA and pin-compatible APEX 20KE migration path let design teams validate ASIC RTL before tapeout. The 1.8V core with MultiVolt I/O support for 2.5V, 3.3V, and 5V interfaces enabled direct connection to ASIC-prototype daughter cards using standard logic families.
推荐
High-Speed DSP Pipeline
The EP20K600CB652C7's 24,320 LEs support multi-channel DSP pipelines for video processing, radar signal processing, and baseband modulation. Its embedded RAM blocks implement coefficient tables, delay lines, and FFT working memory without external SRAM access bottlenecks. The 375.94 MHz toggle rate enables 16-tap FIR filters and complex multipliers at sample rates up to 100 MHz, while 488 user I/Os route parallel data streams to external ADC/DAC converters.
推荐
Network Router Backplane Interface
The 488 user I/Os of the EP20K600CB652C7 provide sufficient connectivity for network router backplane interfaces with multi-gigabit serial links and parallel bus aggregation. Its 600K-gate capacity implements forwarding engines, queue managers, and protocol translators on a single device. The MultiCore architecture's embedded system blocks implement CAM-based route lookup tables with deterministic access times critical for line-rate packet processing in core router line cards.
推荐
Industrial Automation Controller
Industrial automation controllers leverage the EP20K600CB652C7's 600K gates to combine motion control, PLC logic, and HMI rendering in one programmable device. The MultiVolt I/O support enables direct connection to 24V industrial sensor inputs via external level shifters, while the 652-ball BGA package provides sufficient I/O for multi-axis servo drive control. The embedded RAM blocks store trajectory tables and process recipes for deterministic real-time control loops in factory automation systems.
推荐
Video Processing Subsystem
The EP20K600CB652C7's 311K bits of embedded RAM implement line buffers and frame stores for video processing subsystems, eliminating external SRAM in many broadcast and surveillance applications. Its 488 I/Os support parallel ITU-R BT.656 / SMPTE 259M video interfaces and connect to external DDR memory for full-HD frame buffering. At 375.94 MHz, the device handles multi-standard video scaling, de-interlacing, and color space conversion pipelines used in professional video editing equipment.
推荐
推荐产品汇总
工程参考数据： EP20K600CB652C7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP20K600CB652C-8 | EP20K400CB652C7 | EP20K400CB652C8N | EP20K400CB652C9 | EP20K400CB652I7 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 652-ball BGA | 652-ball BGA - same | 652-ball BGA - same | 652-ball BGA - same | 652-ball BGA - same | 652-ball BGA - same |
| System Gates | 600,000 | 600,000 (same) | 400,000 (-33%) | 400,000 (-33%) | 400,000 (-33%) | 400,000 (-33%) |
| Speed Grade | C7 | C8 (faster) | C7 (same) | C8 (faster) | C9 (fastest) | I7 industrial (same speed) |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial (-40C to +85C) |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- Highest-density APEX 20K member with 600K system gates （对比 EP20K400CB652C7)
- MultiCore architecture with embedded system blocks （对比 EP20K400CB652C8N)
- 488 user I/Os for high-density parallel interfaces （对比 EP20K600CB652C-8)
设计说明
The EP20K600CB652C7's 652-ball BGA package requires a controlled-impedance PCB stack-up with matched-length traces for the global clock network. Use 4-6 layer PCB with continuous ground planes beneath the BGA, and follow Altera's APEX 20K reference design for via-in-pad microvia construction. Decoupling capacitors (0.1µF ceramic + 10µF tantalum per VCCINT pin group) must be placed within 5mm of the BGA balls to suppress simultaneous switching noise on the 488 I/O banks.
Estimated: At 375.94 MHz toggle rate with all 488 I/Os switching simultaneously, the EP20K600CB652C7 can dissipate 3-5W. The 652-ball BGA package has a thermal resistance of approximately 12-15 C/W with a properly designed thermal via array beneath the exposed pad, so junction-to-ambient temperature rise is roughly 36-75C. A thermal via array of at least 25 vias (0.3mm diameter, 1mm pitch) filled with thermally conductive epoxy is required for reliable operation above 50C ambient.
The APEX 20K family's JTAG configuration pins (TCK, TMS, TDI, TDO) must be pulled to known states during power-up to prevent inadvertent configuration. Use 10kΩ pull-ups on TCK/TMS/TDI and verify the nCONFIG and nSTATUS signal timing against the Altera Configuration Handbook. Additionally, the 1.8V VCCINT ramp must complete within 100ms to avoid core logic latch-up; if your power supply cannot meet this requirement, add a supervisor circuit to hold nCONFIG low until VCCINT stabilizes.
For DDR SDRAM interfaces, route the 488 user I/Os in matched-length groups with impedance-controlled 50Ω traces (single-ended) or 100Ω differential pairs. The APEX 20K's MultiVolt I/O banks must each be assigned a single VCCIO voltage; mixing 3.3V and 5V within one bank will damage the device. Plan PCB layer stack-up with the BGA breakout on inner layers and signal routing on outer layers to minimize via stubs on high-speed clocks.
合规信息
Compliance data not available in verified web sources. The APEX 20K family predates RoHS-3 mandates; many production parts may not be RoHS compliant. Verify RoHS/REACH status with the distributor before using in restricted applications.