EP910DM/883B - Altera Classic EPLD, 24 Macrocells, MIL-883B | Intel / Altera
料号： EP910DM/883B ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $255 | $2,550.00 |
| 25 | $235 | $5,875.00 |
| 100 | $205 | $20,500.00 |
| 500 | $180 | $90,000.00 |
EP910DM/883B 概述
Background: An EPLD (Erasable Programmable Logic Device) is a type of programmable logic IC that sits in the hierarchy between simple PLDs (PAL/GAL) and larger CPLDs/FPGAs. The classic Altera EPLD family uses UV-erasable or one-time-programmable CMOS cells to implement combinational and registered logic in a single non-volatile device, replacing dozens of 74-series TTL parts with one chip. EPLDs are non-volatile (retain configuration without a bootloader), deterministic in timing, and instantly reconfigurable, which is why they remain preferred for low-density, latency-critical applications and legacy MIL-grade designs.
Key features include 24 macrocells with flexible output polarity, 10 dedicated inputs, 12 bidirectional I/O pins, 4 sum-product terms per macrocell, and an in-system programmable architecture (on selected variants). The CMOS process yields typical standby current in the low milliamp range, and the ceramic DIP-24 package supports the MIL-STD-883B environmental and reliability screening that this /883B suffix designates.
The EP910DM/883B uses a programmable AND/OR array with output macrocells that can be configured as D, T, JK, or SR flip-flops. This allows designers to implement complex state machines, address decoding, and synchronous glue logic in a single device while preserving deterministic pin-to-pin propagation delays across operating conditions.
Typical applications include avionics data-bus controllers, military radar interface logic, naval communication backplanes, industrial-control state machines, and legacy VME/VXI interface adapters. The MIL-STD-883B screening specifically supports high-reliability environments where commercial-grade EPLDs would not meet vibration, thermal, or burn-in requirements.
When designing with this device, note that the EP910DM/883B requires a 5V VCC supply typical of the classic EPLD family and a programmer compatible with the Altera Classic architecture. Designers migrating to modern Intel/Altera devices should consider MAX II or MAX V CPLDs as the architectural successors.
This page synthesizes distributor pricing, MIL-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： EP910DM/883B ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP910DM/883B （相同外形与封装尺寸） ——差异在于 Package, Family, Operating Temperature, Architecture, Propagation Delay (tPD).
快速对比工具——选择替代料号进行并排对比：
EP910DM/883
✅ 直接替换📋 参考替代料（不在目录中）
EP910DM-40
✅ 直接替换✓ 有现货
$21 / 个
查看数据手册 →EP910DI-35
✅ 直接替换✓ 有现货
$35.2 / 个
查看数据手册 →EP910DI-30
✅ 直接替换✓ 有现货
$17.6 / 个
查看数据手册 →EP910DC-40
✅ 直接替换✓ 有现货
$13.95 / 个
查看数据手册 →EP910DC-35
✅ 直接替换✓ 有现货
$10.95 / 个
查看数据手册 →EP910DC-30
✅ 直接替换✓ 有现货
$15.6 / 个
查看数据手册 →EP910DC-15
✅ 直接替换✓ 有现货
$10.75 / 个
查看数据手册 →EP910DM/883B 最大额定值与电气特性
| Family | Altera Classic EPLD |
| Macrocells | 24 |
| Dedicated Inputs | 10 |
| Bidirectional I/O Pins | 12 |
| Supply Voltage (VCC) | 5 V (typical) |
| Process Technology | CMOS (UV-erasable / OTP) |
| 封装 | Ceramic DIP-24 (Cerdip, DM suffix) |
| 工作温度 | MIL-STD-883B screened (military range) |
| 安装类型 | Through-Hole (DIP) |
| Screening | MIL-STD-883B |
EP910DM/883B 引脚配置
| 引脚 1 | I/O — Bidirectional I/O pin |
| 引脚 2 | I/O — Bidirectional I/O pin |
| 引脚 3 | I/O — Bidirectional I/O pin |
| 引脚 4 | I/O — Bidirectional I/O pin |
| 引脚 5 | I/O — Bidirectional I/O pin |
| 引脚 6 | I/O — Bidirectional I/O pin |
| 引脚 7 | I/O — Bidirectional I/O pin |
| 引脚 8 | I/O — Bidirectional I/O pin |
| 引脚 9 | I/O — Bidirectional I/O pin |
| 引脚 10 | I/O — Bidirectional I/O pin |
| 引脚 11 | I/O — Bidirectional I/O pin |
| 引脚 12 | I/O — Bidirectional I/O pin |
| 引脚 13 | IN — Dedicated input pin |
| 引脚 14 | IN — Dedicated input pin |
| 引脚 15 | IN — Dedicated input pin |
| 引脚 16 | IN — Dedicated input pin |
| 引脚 17 | IN — Dedicated input pin |
| 引脚 18 | IN — Dedicated input pin |
| 引脚 19 | IN — Dedicated input pin |
| 引脚 20 | IN — Dedicated input pin |
| 引脚 21 | IN — Dedicated input pin |
| 引脚 22 | IN — Dedicated input pin |
| 引脚 23 | VCC — +5 V supply |
| 引脚 24 | GND — Ground |
典型应用
EP910DM/883B 适用于 6 应用s: Military Avionics Bus Interface Logic, Radar Signal Processing Glue Logic, Naval Communication Backplane Controllers, Industrial Control State Machines, Legacy VME/VXI Interface Adapters, Aerospace Flight Control Redundancy Logic.
Military Avionics Bus Interface Logic
The EP910DM/883B implements MIL-STD-1553 or ARINC-429 bus controllers, address decoders, and handshake logic in avionics LRUs where the Altera Classic 24 macrocells provide ample headroom. Its MIL-STD-883B screening guarantees operation across -55C to +125C, vibration, and thermal-shock profiles demanded by DO-254 design assurance. Ceramic DIP-24 supports through-hole PCBs common in legacy avionics backplanes, and the part's 5 V CMOS interface matches older bus-driver ASICs without level shifters.
推荐
Radar Signal Processing Glue Logic
In phased-array radar front-ends the EP910DM/883B serves as deterministic glue logic between ADC/DAC converters and DSP processors, replacing dozens of 54-series TTL gates with one non-volatile device. The Altera Classic EPLD's nanosecond-class propagation delay preserves timing margins in beam-steering and pulse-compression paths. MIL-STD-883B screening is critical because radar electronics operate in high-vibration, high-temperature environments that disqualify commercial plastic EPLDs. Through-hole DIP-24 also simplifies field serviceability on deployed radar units.
推荐
Naval Communication Backplane Controllers
Navy communication systems on surface combatants and submarines depend on MIL-STD-883B-screened logic for secure data buses, crypto interfaces, and timing-distribution networks. The EP910DM/883B's 24 macrocells and 12 I/O pins support multi-channel protocol framing, while its non-volatile Altera Classic architecture eliminates boot time and configuration memory. Ceramic DIP-24 with hermetic packaging resists salt fog and humidity that would degrade commercial plastic parts, making EP910DM/883B a long-life-cycle choice for naval electronics.
推荐
Industrial Control State Machines
The EP910DM/883B replaces electromechanical relays and discrete logic in heavy-industrial PLCs, motor drives, and process-control systems where deterministic, non-volatile logic is mandatory. Its 24 macrocells comfortably hold complex state machines for sequential control of assembly lines or batch processes, and its MIL-STD-883B screening supports factory environments with high EMI and temperature swings. The ceramic DIP-24 footprint is mechanically rugged for vibration-prone factory floors.
推荐
Legacy VME/VXI Interface Adapters
Test-and-measurement racks using the VME and VXI backplane standards still rely on EPLDs for address decoding, interrupt steering, and bus arbitration. The EP910DM/883B's 24 macrocells and 12 I/O pins support full VME master/slave interfaces with deterministic timing. MIL-STD-883B screening ensures the adapter survives shipboard, airborne, and laboratory qualification testing, and the ceramic DIP-24 package aligns with the through-hole VME card form factor used in legacy instrumentation.
推荐
Aerospace Flight Control Redundancy Logic
Flight-control computers and actuator drivers use the EP910DM/883B to implement voting logic, watchdog timers, and discrete-output decoding in triplex or quad-redundant architectures. The Altera Classic EPLD's nanosecond propagation delay supports the deterministic response times required by DO-178C design assurance levels, while MIL-STD-883B screening ensures the part survives the altitude, vibration, and thermal profiles of commercial and military aircraft. Ceramic DIP-24 supports rugged chassis mounting.
推荐
推荐产品汇总
工程参考数据： EP910DM/883B ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP910DM/883 | EP910DM-40 | EP910DI-35 | EP910DI-30 |
|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) - same brand | Altera (Intel) - same brand | Altera (Intel) - same brand | Altera (Intel) - same brand |
| Package | Ceramic DIP-24 (DM) | Ceramic DIP-24 - same | Ceramic DIP-24 - same | Ceramic DIP-24 - same | Ceramic DIP-24 - same |
| Macrocells | 24 | 24 | 24 | 24 | 24 |
| Dedicated Inputs | 10 | 10 | 10 | 10 | 10 |
| I/O Pins | 12 | 12 | 12 | 12 | 12 |
| Screening | MIL-STD-883B | MIL-STD-883 (older rev) | MIL-STD-883B extended temp | Industrial grade | Industrial grade |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Lifecycle Status | Last-time-buy | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- MIL-STD-883B screened for high-reliability programs （对比 EP910DC-30 (commercial plastic DIP))
- Latest MIL-STD-883B designation （对比 EP910DM/883 (MIL-STD-883 older revision))
- Altera Classic EPLD architecture vs MAX II CPLD successors （对比 MAX II EPM240 CPLD)
设计说明
Estimated: EP910DM/883B draws approximately 50-100 mA at 5 V depending on output switching frequency and output loading. Place 0.1 uF ceramic decoupling capacitors within 5 mm of each VCC pin and a single 10 uF tantalum bulk capacitor on the board's 5 V rail. CMOS logic families can produce significant supply transients during simultaneous output transitions; insufficient decoupling can cause VCC droop that mis-clocks internal registers.
The ceramic DIP-24 package (DM) is through-hole and benefits from socketed installation to allow UV erasure and re-programming of windowed variants. Keep input traces short and route clocks on inner layers with ground reference to minimize skew. For MIL-STD-883B programs, follow IPC-2222 section designs for through-hole ceramic packages and ensure pad finishes are SnPb (not lead-free) to maintain solder joint reliability in thermal-cycling environments.
Do not assume EP910DM/883B is RoHS-compliant - the /883B suffix targets military programs that frequently mandate SnPb lead-bearing terminations. Confirm with the manufacturer before specifying lead-free reflow profiles. Designers should also verify the variant ordering code carefully: EP910DM, EP910DC, EP910DI, EP910DM/883, and EP910DM/883B differ in package, screening, and speed grade, and the wrong suffix will cause qualification failures.
合规信息
MIL-STD-883B screened (military/aerospace) but specific RoHS/REACH/lead-free status not stated in the verified web data; confirm with the manufacturer or distributor documentation before specifying for compliance-restricted programs.
