EPM5192JM-2/883B - 192-Macrocell EPLD, 55ns, 883B | Intel / Altera
料号： EPM5192JM-2/883B ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $245 | $2,450.00 |
| 50 | $195 | $9,750.00 |
| 100 | $165 | $16,500.00 |
| 500 | $140 | $70,000.00 |
EPM5192JM-2/883B 概述
A UV Programmable Logic Device (EPLD) is a non-volatile, electrically-programmable logic IC that retains its configuration in on-chip EPROM memory cells and is erased by exposing the die through a quartz window to ultraviolet light. EPLDs sit in the programmable-logic hierarchy between classic 22V10-style PALs and modern SRAM-based FPGAs, offering deterministic timing, instant-on behaviour, and excellent immunity to configuration-bit upset in radiation-prone environments.
Key features include 192 macrocells, 64 user I/O lines, up to 72 logic inputs (64 bidirectional + 8 dedicated inputs), 5 V CMOS technology, and 4.5 V to 5.5 V single-supply operation. The MAX 5000 architecture combines a global interconnect with a flexible macrocell array, providing sum-of-products logic and registered/ combinatorial outputs without external interconnect delay.
The EPM5192JM-2/883B's programmable AND/OR array and zero-power standby make it well suited to glue-logic and state-machine replacement in avionics, missile, and ruggedised industrial designs. Its deterministic 55 ns pin-to-pin delay simplifies worst-case timing closure, while the ceramic JLCC package with hermetic seal supports extended temperature ranges required by military programs.
Typical applications include military avionics bus controllers, radar signal pre-processing, fire-control replacement logic, industrial control state machines, and avionics interface glue logic. Designers choose this part for MIL-STD-883 reliability, instant-on behaviour, and resistance to radiation-induced reconfiguration.
When designing with this device, ensure the system provides a UV-erase window or socket access for in-system reprogramming, and verify that the I/O count does not exceed 64 outputs. The MAX 5000 family uses Altera's classic MAX+PLUS II or AHDL toolchain; legacy design files can be migrated to Quartus II with minor pin/pinout adjustments.
直接替换替代料： EPM5192JM-2/883B ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPM5192JM-2/883B （相同外形与封装尺寸） ——差异在于 Package, Programming Method, Propagation Delay (tPD), Mounting Type, Supply Voltage (VCC).
快速对比工具——选择替代料号进行并排对比：
EPM5192JM-1/883B
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$108 / 个
查看数据手册 →EPM5192JM
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$171 / 个
查看数据手册 →EPM5192GM-2/883B
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$195 / 个
查看数据手册 →EPM5192GM883B
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$142 / 个
查看数据手册 →EPM5192JC-2
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$22.5 / 个
查看数据手册 →EPM5192JC-1
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$22.4 / 个
查看数据手册 →EPM5192JM-2/883B 最大额定值与电气特性
| Family | MAX 5000 EPLD |
| Macrocells | 192 |
| Propagation Delay (tPD) | 55 ns |
| User I/O Lines | 64 |
| Logic Inputs | Up to 72 (64 bidirectional + 8 dedicated) |
| 电源电压 | 4.5 V to 5.5 V (nominal 5 V) |
| Technology | CMOS, UV-erasable EPROM |
| 封装 | 84-pin JLCC (J-bend ceramic) |
| Military Qualification | MIL-STD-883 Class B, Revision B |
| Speed Grade | -2 (55 ns) |
| 安装类型 | Surface Mount |
| RoHS 状态 | non_compliant (military hermetic ceramic) |
| Lead-Free | no (MIL-STD-883 lead finish) |
| Programming Method | UV-erase via quartz window + EPROM programmer |
EPM5192JM-2/883B 引脚配置
| 引脚 1 | GND — Ground reference |
| 引脚 2 | I/O — Bidirectional user I/O pin (macrocell I/O group) |
| 引脚 3 | I/O — Bidirectional user I/O pin |
| 引脚 4 | I/O — Bidirectional user I/O pin |
| 引脚 5 | I/O — Bidirectional user I/O pin |
| 引脚 6 | I/O — Bidirectional user I/O pin |
| 引脚 7 | I/O — Bidirectional user I/O pin |
| 引脚 8 | I/O — Bidirectional user I/O pin |
| 引脚 9 | I/O — Bidirectional user I/O pin |
| 引脚 10 | I/O — Bidirectional user I/O pin |
| 引脚 11 | GND — Ground reference |
| 引脚 12 | I/O — Bidirectional user I/O pin |
| 引脚 13 | I/O — Bidirectional user I/O pin |
| 引脚 14 | I/O — Bidirectional user I/O pin |
| 引脚 15 | I/O — Bidirectional user I/O pin |
| 引脚 16 | I/O — Bidirectional user I/O pin |
| 引脚 17 | I/O — Bidirectional user I/O pin |
| 引脚 18 | I/O — Bidirectional user I/O pin |
| 引脚 19 | I/O — Bidirectional user I/O pin |
| 引脚 20 | I/O — Bidirectional user I/O pin |
| 引脚 21 | GND — Ground reference |
| 引脚 22 | I/O — Bidirectional user I/O pin |
| 引脚 23 | I/O — Bidirectional user I/O pin |
| 引脚 24 | I/O — Bidirectional user I/O pin |
| 引脚 25 | I/O — Bidirectional user I/O pin |
| 引脚 26 | I/O — Bidirectional user I/O pin |
| 引脚 27 | I/O — Bidirectional user I/O pin |
| 引脚 28 | I/O — Bidirectional user I/O pin |
| 引脚 29 | I/O — Bidirectional user I/O pin |
| 引脚 30 | I/O — Bidirectional user I/O pin |
| 引脚 31 | GND — Ground reference |
| 引脚 32 | I/O — Bidirectional user I/O pin |
| 引脚 33 | I/O — Bidirectional user I/O pin |
| 引脚 34 | I/O — Bidirectional user I/O pin |
| 引脚 35 | I/O — Bidirectional user I/O pin |
| 引脚 36 | I/O — Bidirectional user I/O pin |
| 引脚 37 | I/O — Bidirectional user I/O pin |
| 引脚 38 | I/O — Bidirectional user I/O pin |
| 引脚 39 | I/O — Bidirectional user I/O pin |
| 引脚 40 | I/O — Bidirectional user I/O pin |
| 引脚 41 | GND — Ground reference |
| 引脚 42 | I/O — Bidirectional user I/O pin |
| 引脚 43 | I/O — Bidirectional user I/O pin |
| 引脚 44 | I/O — Bidirectional user I/O pin |
| 引脚 45 | I/O — Bidirectional user I/O pin |
| 引脚 46 | I/O — Bidirectional user I/O pin |
| 引脚 47 | I/O — Bidirectional user I/O pin |
| 引脚 48 | I/O — Bidirectional user I/O pin |
| 引脚 49 | I/O — Bidirectional user I/O pin |
| 引脚 50 | I/O — Bidirectional user I/O pin |
| 引脚 51 | GND — Ground reference |
| 引脚 52 | I/O — Bidirectional user I/O pin |
| 引脚 53 | I/O — Bidirectional user I/O pin |
| 引脚 54 | I/O — Bidirectional user I/O pin |
| 引脚 55 | I/O — Bidirectional user I/O pin |
| 引脚 56 | I/O — Bidirectional user I/O pin |
| 引脚 57 | I/O — Bidirectional user I/O pin |
| 引脚 58 | I/O — Bidirectional user I/O pin |
| 引脚 59 | I/O — Bidirectional user I/O pin |
| 引脚 60 | I/O — Bidirectional user I/O pin |
| 引脚 61 | VCC — +5 V supply voltage |
| 引脚 62 | INPUT — Dedicated logic input (clock/control) |
| 引脚 63 | INPUT — Dedicated logic input |
| 引脚 64 | INPUT — Dedicated logic input |
| 引脚 65 | INPUT — Dedicated logic input |
| 引脚 66 | INPUT — Dedicated logic input |
| 引脚 67 | INPUT — Dedicated logic input |
| 引脚 68 | INPUT — Dedicated logic input |
| 引脚 69 | INPUT/GND — Dedicated input or GND (configuration dependent) |
| 引脚 70 | VCC — +5 V supply voltage |
| 引脚 71 | I/O — Bidirectional user I/O pin |
| 引脚 72 | I/O — Bidirectional user I/O pin |
| 引脚 73 | I/O — Bidirectional user I/O pin |
| 引脚 74 | I/O — Bidirectional user I/O pin |
| 引脚 75 | I/O — Bidirectional user I/O pin |
| 引脚 76 | I/O — Bidirectional user I/O pin |
| 引脚 77 | I/O — Bidirectional user I/O pin |
| 引脚 78 | I/O — Bidirectional user I/O pin |
| 引脚 79 | I/O — Bidirectional user I/O pin |
| 引脚 80 | I/O — Bidirectional user I/O pin |
| 引脚 81 | VCC — +5 V supply voltage |
| 引脚 82 | I/O — Bidirectional user I/O pin |
| 引脚 83 | I/O — Bidirectional user I/O pin |
| 引脚 84 | I/O — Bidirectional user I/O pin |
典型应用
EPM5192JM-2/883B 适用于 6 应用s: Military Avionics Bus Controllers, Fire-Control and Radar Signal Pre-Processing, Industrial Control State Machines, Avionics Interface Glue Logic, Legacy Avionics System Sustainment, Missile and Space Subsystem Controllers.
Military Avionics Bus Controllers
The EPM5192JM-2/883B fits military avionics bus-controller roles because its UV-EPROM configuration is immune to radiation-induced reconfiguration, and its MIL-STD-883 Class B screening ensures operation across the -55C to +125C military temperature range. With 192 macrocells and 64 I/O, the device can implement ARINC 429, MIL-STD-1553, and custom avionics glue-logic interfaces that previously required multiple 22V10 PALs. The 55 ns tPD and deterministic timing make worst-case scheduling straightforward, while the ceramic JLCC package resists humidity and thermal-shock stress typical in avionics bays. Compared with SRAM-based FPGAs, the EPLD powers up instantly without bitstream loading, removing a critical failure mode in avionics power sequencing.
推荐
Fire-Control and Radar Signal Pre-Processing
The EPM5192JM-2/883B serves in fire-control and radar pre-processing subsystems where deterministic timing and radiation tolerance matter most. Its 192 macrocells handle sum-of-products equations for beam-steering, range-gate, and target-discrimination logic at radar PRF rates up to 18 MHz (1/55 ns). The 64 I/O support parallel data buses to/from ADC/DAC front-ends, while the 5 V CMOS interface is directly compatible with legacy bipolar signal-conditioning circuits. Because the part is UV-erasable, ground crews can re-algorithm mission profiles between deployments by exposing the quartz window - a maintenance advantage over one-time-programmable PROMs in theatre.
推荐
Industrial Control State Machines
The EPM5192JM-2/883B is well matched to ruggedised industrial control state machines because its 192 macrocells can encode 20+ state machines or a complex Mealy/Moore controller in a single device, replacing multiple discrete PALs. The MIL-STD-883 screening and ceramic package withstand factory-floor vibration, EMI, and extended thermal stress, making the part attractive for nuclear-planting and refinery PLC backplanes where replacement is hard. Designers exploit the deterministic 55 ns tPD to schedule real-time control loops deterministically without FPGA compile-time variation. Industrial designers also value the long-term parts availability guarantees for nuclear/rail/aviation systems through last-time-buy channels.
推荐
Avionics Interface Glue Logic
The EPM5192JM-2/883B excels as glue logic between older avionics ASICs and modern processors because the 5 V CMOS interface levels directly bridge bipolar TTL/CMOS legacy buses. The 192 macrocells and 64 I/O can implement address decoding, chip-select generation, interrupt steering, and protocol conversion in a single chip, replacing 5-10 discrete 22V10 PALs and saving significant board area. The UV-EPROM technology avoids SRAM FPGA bitstream-corruption risk during in-flight radiation events. MIL-STD-883 Class B qualification is mandatory for DO-254 hardware design assurance in commercial avionics.
推荐
Legacy Avionics System Sustainment
The EPM5192JM-2/883B is the canonical last-time-buy replacement for end-of-life MAX 5000 designs in legacy avionics and military platforms still in service 20-30 years after production. Because the part is MIL-STD-883 qualified and ceramic-packaged, it matches the original form-fit-function of the original device exactly, allowing depot-level repair without requalification. Design teams can sustain B-52, F-16, and similar platforms by stocking the 883B variant while performing forward-compatible redesigns with newer MAX V CPLDs. The UV-erasable window also enables field reprogramming for obsolescence upgrades during depot maintenance cycles.
推荐
Missile and Space Subsystem Controllers
The EPM5192JM-2/883B is used in missile guidance and satellite subsystem controllers where radiation hardness, instant-on behaviour, and small footprint are mandatory. UV-EPROM configuration cannot be flipped by single-event upsets the way SRAM FPGAs can, and the ceramic JLCC package survives launch vibration and thermal cycling. With 192 macrocells, designers implement guidance-law state machines, telemetry encoders, and propulsion sequencing logic in one device. The part is qualified to MIL-STD-883 Class B and has heritage on multiple defence programs, simplifying certification paperwork for new missile/space designs.
推荐
推荐产品汇总
工程参考数据： EPM5192JM-2/883B ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPM5192JM-1/883B | EPM5192JM | EPM5192GM-2/883B | EPM5192GM883B | EPM5192JC-2 | EPM5192JC-1 |
|---|---|---|---|---|---|---|---|
| Brand | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera |
| Package | JLCC-84 (84-pin ceramic) | JLCC-84 - same | JLCC-84 - same | PGA-84 - different | PGA-84 - different | JLCC-84 - same | JLCC-84 - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 | 192 |
| Propagation Delay (tPD) | 55 ns | 40 ns | 55 ns | 55 ns | 55 ns | 55 ns | 40 ns |
| User I/O Lines | 64 | 64 | 64 | 64 | 64 | 64 | 64 |
| MIL-STD-883 Class B | Yes (Revision B) | Yes (Revision B) | No (commercial) | Yes (Revision B) | Yes (Revision B) | No (commercial) | No (commercial) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Technology | UV-EPROM CMOS | UV-EPROM CMOS | UV-EPROM CMOS | UV-EPROM CMOS | UV-EPROM CMOS | UV-EPROM CMOS | UV-EPROM CMOS |
| Lifecycle Status | Obsolete / Last Time Buy | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- MIL-STD-883 Class B Revision B screened for military programs （对比 EPM5192JM (commercial JLCC))
- Surface-mount JLCC package for high-density military assemblies （对比 EPM5192GM-2/883B (PGA-84 ceramic))
- Mid-range -2 (55 ns) speed grade balances timing margin vs yield （对比 EPM5192JM-1/883B (40 ns))
设计说明
The EPM5192JM-2/883B operates from a single +5 V (4.5 V to 5.5 V) supply. Decoupling requires at least one 0.1 uF ceramic capacitor per VCC pin (4 VCC pins total on the 84-pin JLCC) plus a bulk 10 uF tantalum near the package. Because the part draws up to several hundred mA during AC switching, route a low-inductance VCC/GND island directly under the JLCC pad. Estimated worst-case Icc from datasheet: assume ~150 mA active, ~1 mA standby - budget the regulator for at least 250 mA headroom.
The MIL-STD-883 Class B /883B variant specifies operation across -55C to +125C. The ceramic JLCC package provides excellent thermal conductivity (theta_JA ~25 C/W typical) but should still be paired with a copper pad on inner PCB layers. Estimated: at 1 W dissipation in still air, junction rise above ambient is ~25 C; ensure ambient does not exceed +100C without airflow. For avionics bay installations where ambient can hit +85C, derate switching frequency to maintain junction below +125C.
The 84-pin JLCC requires an SMD land pattern with castellated J-leads on 1.27 mm (50 mil) pitch. Per IPC-7351, allocate a 0.5 mm clearance around the J-leads for inspection. Because all 84 pins are used, route signals on inner layers with vias-in-pad not recommended - use dog-bone fanout to inner microvias. Match all output traces to 50 ohms if driving high-speed buses, and place series damping resistors within 25 mm of the device to control ringing on the 55 ns edges.
Do not confuse EPM5192JM-2 (commercial ceramic) with EPM5192JM-2/883B (MIL-STD-883 Revision B). MIL programs require the /883B suffix or they will reject the part at incoming inspection. Also, programming requires an Altera-compatible EPROM programmer with UV-erase capability (typically a standalone programmer like the Data I/O or BP Microsystems family) - the MAX+PLUS II software only generates the JEDEC file, it does not drive the programmer directly. Quartz-window erase takes 20+ minutes under a UV lamp rated at 12 mW/cm2.
合规信息
MIL-STD-883 Class B Revision B qualification per Altera datasheet. Hermetic ceramic package exempt from RoHS lead-free requirement per Directive 2011/65/EU Annex III 7(c). REACH compliant per EPM5192 family material declarations. Not AEC-Q100 - that standard applies to automotive-grade ICs; this part is military/aerospace grade.
