Maxim Integrated

ICL7129ACPL+ - 4.5-Digit Low-Noise LCD ADC | Maxim Integrated

料号: ICL7129ACPL+ ✓ 量产中
40-pin PDIP Package
最小起订量: 1 |

ICL7129ACPL+ 概述

The Maxim Integrated ICL7129ACPL+ is a low-noise, 4.5-digit, single-chip analog-to-digital converter with multiplexed LCD drivers, supplied in a 40-pin PDIP package. It is designed for precision digital voltmeter, digital panel meter, laboratory instrument, process-control, and weighing-system applications. The device uses successive-integration conversion, provides high-impedance differential inputs, supports true ratiometric operation, and includes automatic polarity detection. Its integrated multiplexed LCD drivers reduce the number of external display-interface components, while the 4.5-digit resolution supports measurements up to 19,999 counts according to the manufacturer product information. The converter is intended for systems where a stable reference voltage and suitable input conditioning determine the final measurement accuracy. ICL7129ACPL+ is listed as a production product by Maxim Integrated, and the manufacturer describes it as a low-noise 4 1/2-digit ADC with multiplexed LCD drivers. The package provides through-hole DIP construction for straightforward prototyping and repair, although it is larger than modern surface-mount ADC packages. Engineers should pay attention to the reference voltage, input common-mode range, integration period, LCD segment drive requirements, and the external components used for noise filtering when designing a new instrument. The ICL7129ACPL+ is particularly useful when a legacy panel-meter architecture needs a proven display-driver and ADC combination without changing the mechanical format of the board.

直接替换替代料: ICL7129ACPL+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ICL7129ACPL+ (相同外形与封装尺寸) ——差异在于 Converter Type, Display Output, Mounting Type, Resolution.

Maxim Integrated
Converter Type: Dual-slope integrating A/D converter
Display Output: Direct seven-segment LED display drive
Mounting Type: Through-hole
对比 ICL7129ACPL+ →
Intersil
Converter Type: Successive-integration A/D converter
Display Output: Multiplexed LCD drive
Mounting Type: Through-hole
对比 ICL7129ACPL+ →

ICL7129CPL

✅ 直接替换
Intersil
📦 40-pin PDIP
Successive-integration A/D converter · 4.5 digits · Approximately ±20,000 counts · Multiplexed LCD drive · 40-pin PDIP · Through-hole · 40 pins · CMOS

联系询价

查看数据手册 →

ICL7129ACPL+2

✅ 直接替换
📦 40-pin PDIP
Same ICL7129ACPL family and 40-pin PDIP footprint; the +2 ordering suffix differs by approximately 0% in listed functionality

📋 参考替代料(不在目录中)

TC7129CKW

✅ 直接替换
📦 40-pin PDIP
Closely related 4.5-digit LCD-driver ADC family with the same listed 40-pin PDIP format; exact pin and electrical differences require manufacturer verification

📋 参考替代料(不在目录中)

ICL7117CPL+

✅ 直接替换
Maxim Integrated
📦 40-pin PDIP
Dual-slope integrating A/D converter · 3.5 digits · 1 channel · Direct seven-segment LED display drive · A/D converter, seven-segment decoders, display drivers, voltage reference, and clock · Yes, display Hold input · Very high input impedance · 40-pin PDIP

联系询价

查看数据手册 →

ICL7106CPLZ

✅ 直接替换
📦 40-pin PDIP
Same listed 40-pin PDIP format with a lower-resolution display-driver ADC function; exact timing and pin compatibility must be confirmed before substitution

📋 参考替代料(不在目录中)

ICL7129ACPL+ 最大额定值与电气特性

Converter Type 4.5-digit single-chip successive-integration ADC
Display Output Multiplexed LCD drivers
Input Configuration High-impedance differential inputs
分辨率 4.5 digits; +/-19,999 counts
Conversion Technology Successive integration
Polarity Detection Automatic polarity detection
Ratiometric Operation True ratiometric operation
Input Noise 3 uV peak-to-peak for ICL7129A
Range Changing 10:1 range-changing input
封装 40-pin PDIP
安装类型 Through-hole DIP

ICL7129ACPL+ 40-pin pdip 引脚配置指南

ICL7129ACPL+(40-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

ICL7129ACPL+ 的 40-pin pdip 封装引脚图

暂无详细引脚数据: ICL7129ACPL+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ICL7129ACPL+ 适用于 6 应用s: Digital Voltmeter, Digital Panel Meter, Laboratory Measurement Instrument, Process Control Monitor, Weighing Scale Display, Temperature Measurement Instrument.

📊

Digital Voltmeter

The ICL7129ACPL+ is suited to a precision digital voltmeter because it combines a 4.5-digit ADC, high-impedance differential inputs, true ratiometric operation, and automatic polarity detection. The instrument can use the converter's multiplexed LCD drivers to present the measured voltage directly without a separate display-driver IC. Input conditioning should include protection, filtering, and a stable reference arrangement selected for the intended voltage range. The 40-pin PDIP format is convenient for laboratory prototypes, educational instruments, and repair-oriented panel-meter designs where through-hole construction and direct LCD support are priorities.

🏭

Digital Panel Meter

A digital panel meter can use the ICL7129ACPL+ to convert a conditioned sensor or process signal into a 4.5-digit LCD reading. Automatic polarity detection simplifies bipolar measurements, while the 10:1 range-changing input supports designs that need more than one measurement scale. The integrated multiplexed LCD drivers reduce the number of external interface components and help create a compact instrument front panel. Panel-meter engineers should verify the LCD segment configuration, reference voltage, input common-mode limits, and timing requirements against the manufacturer datasheet before finalizing the PCB.

🧪

Laboratory Measurement Instrument

The low-noise 4.5-digit conversion and high-impedance differential input arrangement make the ICL7129ACPL+ useful in laboratory instruments that display slow or medium-speed measurements with high resolution. The ICL7129A family's listed 3 uV peak-to-peak input noise supports precision measurement designs, although the complete signal chain must remain quiet. A practical implementation places the converter close to the input network, uses careful grounding, and selects a stable reference. The multiplexed LCD output provides a readable result without requiring a separate display interface in the basic measurement instrument.

⚙️

Process Control Monitor

The ICL7129ACPL+ can serve as the measurement and display front end of a process-control monitor when the input is conditioned into the converter's supported range. Its automatic polarity detection and true ratiometric operation are useful for signals derived from sensors or bridge-like excitations, while the 4.5-digit format provides more display resolution than a 3.5-digit meter. For industrial deployment, the design must protect the analog input from transients and maintain a low-noise reference and ground arrangement. The PDIP package is appropriate for through-hole industrial control boards that require serviceability and visual operator feedback.

⚖️

Weighing Scale Display

A weighing-scale display can use the ICL7129ACPL+ when the load-cell or transducer signal is amplified, filtered, and referenced with sufficient stability. The 4.5-digit resolution provides 19,999 count positions, while ratiometric operation can help maintain scale accuracy when the excitation and measurement paths share a controlled reference relationship. The LCD drivers are appropriate for a compact operator display. Calibration, input offset, gain trimming, excitation noise, and mechanical vibration remain system-level concerns; the converter should be positioned away from high-current switching paths to avoid contaminating the measurement.

🌡️

Temperature Measurement Instrument

The ICL7129ACPL+ is applicable to temperature measurement instruments that use a linearized sensor signal and a local LCD. The 4.5-digit display resolution can show fractional temperature information, and the high-impedance input supports the external signal-conditioning network required by thermocouple or RTD front ends. Input bias, common-mode behavior, and leakage from the protection network should be checked because they can create errors in high-impedance temperature sensors. A stable reference and carefully routed ground plane are essential, while the multiplexed LCD output keeps the display interface compact.

推荐产品汇总

ICL7129ACPL Related 4.5-digit ADC and LCD-driver device 用于: Digital Voltmeter, Weighing Scale Display ICL7129CPL Intersil 用于: Digital Voltmeter, Laboratory Measurement Instrument, Temperature Measurement Instrument ICL7129ACPL+2 Related ICL7129ACPL family ordering option 用于: Digital Panel Meter TC7129CKW Related 4.5-digit LCD-driver ADC family 用于: Digital Panel Meter, Weighing Scale Display ICL7117CPL+ Maxim Integrated 用于: Laboratory Measurement Instrument, Temperature Measurement Instrument ICL7106CPLZ Related panel-meter ADC family 用于: Process Control Monitor ICL7107CPLZ Related display-driver converter family 用于: Process Control Monitor
What is the function of the ICL7129ACPL+?
The ICL7129ACPL+ is a low-noise, 4.5-digit single-chip ADC with multiplexed LCD display drivers. It converts an analog input into a digital measurement and can directly drive a multiplexed liquid-crystal display. According to the Maxim Integrated product information, the device uses successive-integration conversion and provides high-impedance differential inputs, true ratiometric operation, and automatic polarity detection for precision panel-meter and laboratory-instrument designs.
What resolution does the ICL7129ACPL+ provide?
The ICL7129ACPL+ provides 4.5-digit resolution, corresponding to a +/-19,999-count measurement range as stated in the component description. This resolution is higher than a conventional 3.5-digit panel-meter ADC and allows the displayed result to represent one additional digit of useful resolution. The practical accuracy of the instrument still depends on reference stability, input noise, resistor matching, layout, and calibration.
Where can I download the ICL7129ACPL+ datasheet?
The ICL7129ACPL+ datasheet and product resources are available from Maxim Integrated at https://www.analog.com/en/products/icl7129a.html. The manufacturer product page identifies the ICL7129A family as a production low-noise, 4 1/2-digit ADC with multiplexed LCD drivers. Use the manufacturer datasheet for the authoritative pin description, timing information, electrical characteristics, and application circuit details.
Where can I find the ICL7129ACPL+ pinout?
The ICL7129ACPL+ pinout is identified in the ICL7129A manufacturer datasheet, whose product page is https://www.analog.com/en/products/icl7129a.html. The component is packaged in a 40-pin PDIP. Use the pin-description table and package drawing in the datasheet when assigning PCB tracks, especially for the LCD segment outputs, reference input, supply pins, and analog measurement inputs.
What is the noise performance of the ICL7129ACPL+?
The ICL7129ACPL+ is specified as a low-noise converter, with the component description identifying 3 uV peak-to-peak input noise for the ICL7129A family. Low input noise helps preserve useful resolution in precision measurement systems. For an instrument design, the reference, input amplifier, protection network, grounding, and filtering must also be selected so that system noise does not overwhelm the converter's specified performance.
Is the ICL7129ACPL+ suitable for digital panel meters?
Yes, the ICL7129ACPL+ is well suited to digital panel meters because it combines a 4.5-digit ADC with multiplexed LCD drivers in one 40-pin PDIP package. The integrated display interface simplifies the analog and digital sections of a panel-meter design. Typical uses include digital voltmeters, laboratory meters, process indicators, and other instruments that need a readable local LCD.
Can the ICL7129ACPL+ replace a 3.5-digit integrating ADC?
The ICL7129ACPL+ can be considered when the replacement design requires 4.5-digit resolution, true ratiometric operation, automatic polarity detection, and multiplexed LCD output. A candidate with only 3.5-digit resolution will generally provide a lower displayed count range and may differ in LCD drive, reference, and pin functions. Verify the complete pinout, supply requirements, conversion timing, and display configuration before treating any candidate as a drop-in replacement.
What is the difference between ICL7129ACPL+ and ICL7129CPL?
The ICL7129ACPL+ is the lead-free ordering code for the Maxim Integrated ICL7129ACPL device, while ICL7129CPL is the related non-plus ordering code shown in the manufacturer documentation. The comparison snippet for the two devices identifies both as 40-pin PDIP versions of the same low-noise 4.5-digit converter family. Confirm the ordering suffix and the required production or RoHS status against the current manufacturer product information before placing an order.
When should I choose ICL7129ACPL+ instead of ICL7117CPL+?
Choose ICL7129ACPL+ when the design needs 4.5-digit resolution, multiplexed LCD drive, true ratiometric operation, and automatic polarity detection. ICL7117CPL+ is described as a 3.5-digit ADC with display hold in a 40-pin DIP and is therefore a different architecture and resolution class. It can be relevant when an existing panel-meter board is designed around the ICL7117 function, but it is not automatically interchangeable with the ICL7129ACPL+.
What is the best replacement for ICL7129ACPL+?
The best replacement is the candidate that preserves the 40-pin PDIP footprint, 4.5-digit conversion function, multiplexed LCD drive, reference arrangement, and required electrical timing. ICL7129CPL and ICL7129ACPL+2 appear in the available device listings, but the suffix and package or production requirements must be checked carefully. Use the manufacturer datasheet and cross-reference information to confirm pin compatibility before purchasing a replacement.
How do I select the reference voltage for an ICL7129ACPL+ design?
Select the reference voltage according to the desired measurement range, input resolution, and whether the instrument uses ratiometric operation. A stable reference determines the scale of the conversion, while ratiometric operation can cancel some reference variation when the reference is derived from the same excitation used at the input. The exact allowable range and accuracy conditions should be taken from the manufacturer datasheet rather than inferred from the displayed digit count.
What external components does an ICL7129ACPL+ meter require?
The ICL7129ACPL+ requires an external reference component, input conditioning and filtering components, bypass capacitors, and the appropriate LCD display connections. The manufacturer states that a reference is the only external active component required to make precision DVM or DPM designs. Passive input networks, protection devices, switches, and calibration elements may also be needed depending on the measurement range and environment.
Where can I request a quote for ICL7129ACPL+?
Use the Request a Quote form on this page to request current pricing, stock confirmation, lead time, and order quantity information for ICL7129ACPL+. The part is identified by Maxim Integrated as a production device, and the 40-pin PDIP package is available through multiple distribution channels. Submit the exact MPN, including the trailing plus sign, with your required quantity and delivery location.
How much does ICL7129ACPL+ cost and what is its lead time?
The current commercial terms for ICL7129ACPL+ should be obtained through the Request a Quote form on this page. Pricing and availability can vary with quantity, package suffix, inventory position, and delivery location, so static figures should not be used for budgeting. Include the required quantity, target date, and shipment destination in the quote request for a current response.
What are the key specifications of ICL7129ACPL+ for engineers?
The key ICL7129ACPL+ specifications are its 4.5-digit resolution, +/-19,999-count range, low-noise 3 uV peak-to-peak input noise for the ICL7129A family, successive-integration conversion, high-impedance differential inputs, true ratiometric operation, automatic polarity detection, and multiplexed LCD drivers. The device is packaged in a 40-pin PDIP, making it especially relevant to legacy-style precision panel meters and laboratory instruments.

工程参考数据: ICL7129ACPL+ ——对比、设计指导和合规信息。

选型指南

Choose the ICL7129ACPL+ when a new or repaired instrument needs 4.5-digit measurement resolution, multiplexed LCD drive, high-impedance differential inputs, automatic polarity detection, and true ratiometric operation. It is particularly appropriate for digital voltmeters, panel meters, laboratory instruments, process monitors, weighing displays, and temperature instruments that use a 40-pin PDIP architecture. Choose ICL7117CPL+ only when the existing design is built around a 3.5-digit converter and display-hold or LED-display behavior. ICL7106CPLZ may suit older panel-meter designs, but its exact electrical and display differences should be verified. For a same-family substitution, ICL7129CPL and ICL7129ACPL+2 are the closest ordering-code candidates, although suffix, lifecycle, and qualification requirements must be checked before design approval.

与替代料对比

参数 本产品 ICL7129CPL ICL7129ACPL+2 TC7129CKW ICL7117CPL+ ICL7106CPLZ
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
Brand Maxim Integrated Maxim Integrated Maxim Integrated Texas Instruments Maxim Integrated Maxim Integrated
Conversion Method Successive integration Successive integration Successive integration Successive integration Dual-slope conversion Dual-slope conversion

关键差异点

  • Higher display resolution than the 3.5-digit ICL7117CPL+ (对比 ICL7117CPL+)
  • Integrated multiplexed LCD drive (对比 ICL7106CPLZ)
  • Automatic polarity detection (对比 TC7129CKW)

设计说明

Place the ICL7129ACPL+ close to the analog input and reference network, and route the LCD output traces away from sensitive measurement nodes. The 40-pin PDIP footprint provides generous mechanical spacing, but the analog input pins still require short traces and a continuous ground plane. Confirm the manufacturer pin-description table before assigning LCD segment, reference, supply, and analog signal connections.

Use a low-noise reference and bypass arrangement, and filter the input signal with values appropriate to the required response time. The device uses successive integration, so system timing and input settling must be coordinated with the measurement range. Avoid sharing high-current return paths between the sensor, reference, and display subsystem, since ground movement can appear directly as measurement error.

Do not assume that every 40-pin display-driver ADC is interchangeable. The ICL7129ACPL+ requires the correct 4.5-digit LCD segment arrangement, reference configuration, polarity behavior, and timing sequence. Before using ICL7117CPL+, ICL7106CPLZ, or another listed candidate, compare every pin function and the display timing diagrams in the manufacturer documentation.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The trailing plus suffix is associated with Maxim Integrated lead-free ordering, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was identified. Automotive qualification is not stated.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

maxim icl7129acpl ICL7129ACPL+ datasheet ICL7129ACPL+ datasheet pdf ICL7129ACPL+ pinout ICL7129ACPL+ specifications ICL7129ACPL+ replacement ICL7129ACPL+ equivalent ICL7129ACPL+ vs ICL7117CPL+ ICL7129ACPL+ vs TC7129CKW ICL7129ACPL+ price ICL7129ACPL+ 40-pin PDIP ICL7129ACPL+ digital voltmeter

相关元器件 & 术语

Maxim Integrated ICL7129ACPL+ ICL7129ACPL ICL7129CPL ICL7129ACPL+2 TC7129CKW ICL7117CPL+ ICL7106CPLZ ICL7107CPLZ analog-to-digital converter ADC successive-integration ADC dual-slope ADC 4.5-digit ADC multiplexed LCD driver digital voltmeter digital panel meter laboratory measurement instrument process control monitor weighing scale display 40-pin PDIP PDIP package family through-hole DIP high-impedance differential input true ratiometric operation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情