INA125PAG4 - Precision Instrumentation Amplifier | Texas Instruments
料号: INA125PAG4 ✓ 量产中INA125PAG4 概述
An instrumentation amplifier is a specialized amplifier category designed to provide high input impedance, accurate differential gain, and excellent rejection of common-mode signals. This is especially important when a small sensor differential voltage is measured in the presence of a much larger common-mode voltage. The INA125PAG4 provides the internal gain network and precision reference needed for complete bridge excitation and signal conditioning, reducing the number of external precision components required in a measurement front end.
The principal benefits of this device include integrated precision voltage-reference capability, differential input architecture, programmable gain using external resistors, and a single-ended output suitable for connection to analog-to-digital converters or control systems. The device is identified as a 1-circuit instrumentation amplifier in a 16-PDIP package. Its input offset voltage is listed as 500 microvolts, and its bandwidth is listed as 150 kHz. These characteristics support moderate-bandwidth industrial measurement systems where accurate signal amplification is more important than very high-speed conversion.
The INA125 family is suitable for applications involving resistive bridges and other small differential signals. The integrated reference can provide a stable excitation voltage for a bridge, while the instrumentation amplifier rejects common-mode voltage and applies a selected gain to the differential sensor output. Designers should account for the input common-mode range, output voltage swing, reference accuracy, resistor tolerance, and supply requirements when selecting the operating gain and external network.
Typical uses include industrial process monitoring, load-cell signal conditioning, strain-gauge bridges, pressure transducers, laboratory instrumentation, and embedded data-acquisition systems. In a bridge circuit, the transducer changes resistance according to the measured physical quantity, creating a differential voltage that the INA125PAG4 amplifies relative to the supplied excitation. The resulting analog signal can then be sampled by an ADC after appropriate filtering and level adjustment.
For PCB implementation, use a clean analog ground strategy, route the differential input pair as a tightly matched pair, and keep the gain-setting and reference-related components close to the device. Verify the actual supply, common-mode, output-swing, and gain limits against the manufacturer datasheet before releasing the design. The DIP package also provides generous pin spacing for prototyping and through-hole assembly, although a surface-mount package is preferable when board area or production routing is a primary constraint.
This page provides a structured view of the INA125PAG4's instrumentation-amplifier role, package characteristics, verified operating highlights, application guidance, and design considerations. It is intended to help engineers evaluate the device for bridge-sensing and precision analog measurement systems without overlooking the electrical limits that determine gain, bandwidth, and signal integrity.
直接替换替代料: INA125PAG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: INA125PAG4 (相同外形与封装尺寸) ——差异在于 Package, Product Type, Quiescent Current.
INA125PAG4 最大额定值与电气特性
| Device Type | Single-circuit instrumentation amplifier |
| Integrated Voltage Reference | Yes |
| Input Type | Differential |
| 输出类型 | Single-ended |
| Number of Amplifiers | 2 |
| Input Offset Voltage | 500 microvolts |
| Bandwidth | 150 kHz |
| 封装 | 16-PDIP, through-hole |
| Number of Terminals | 16 |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| 安装类型 | Through-hole |
INA125PAG4 rectangular 引脚配置指南
INA125PAG4(rectangular 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: INA125PAG4.
请参阅 数据手册 以查看完整引脚配置。
典型应用
INA125PAG4 适用于 6 应用s: Load-Cell Signal Conditioning, Pressure Transducer Interface, Strain-Gauge Measurement, Industrial Process Monitoring, Laboratory Data-Acquisition, Precision Voltage Reference Output.
Load-Cell Signal Conditioning
The INA125PAG4 is suitable for conditioning the small differential output of a resistive load cell because it combines differential amplification with an integrated precision reference for bridge excitation. The 500 microvolt input offset and 150 kHz bandwidth provide a practical starting point for static force and weight measurement. Place the amplifier close to the bridge and use a matched, shielded differential route to reduce pickup from motors, switching supplies, and adjacent digital circuitry.
推荐
Pressure Transducer Interface
A resistive pressure transducer benefits from the INA125PAG4's integrated reference and differential input stage because sensor excitation and signal amplification can be handled in one controlled analog section. The 150 kHz bandwidth supports many process-monitoring signals without requiring a high-speed instrumentation amplifier. Calibration should include zero offset, span, reference accuracy, bridge tolerance, and the input offset specified for the device.
推荐
Strain-Gauge Measurement
The INA125PAG4 can amplify the differential output of a strain-gauge bridge while rejecting common-mode voltage that may be much larger than the sensor signal. Its 500 microvolt input offset is relevant when the selected gain multiplies small strains into a small output voltage. Use stable excitation, low-noise reference grounding, careful resistor selection, and a mechanical design that minimizes parasitic strain and temperature gradients.
推荐
Industrial Process Monitoring
The INA125PAG4 is appropriate for industrial process-monitoring modules that accept low-level differential sensor signals and require an integrated excitation source. The 16-pin DIP package is convenient for prototype boards and through-hole industrial assemblies. For field reliability, isolate noisy inputs, provide filtering, maintain a clean analog return path, and verify the complete supply and common-mode limits in the manufacturer datasheet.
推荐
Laboratory Data-Acquisition
The INA125PAG4 can provide the analog front end for laboratory data-acquisition systems using resistive dividers, strain gauges, or other bridge sensors. Its single-ended output is compatible with a general-purpose ADC input when the output range is scaled appropriately. The 150 kHz bandwidth is suitable for many slowly varying or moderately sampled measurements, while calibration and connector design determine achievable laboratory accuracy.
推荐
Precision Voltage Reference Output
Because the INA125 includes a precision voltage reference, it can support measurement systems that need both differential signal conditioning and a stable excitation or reference node. The reference output should be checked against the datasheet's specified accuracy, drift, load capability, and decoupling requirements. Avoid using the reference terminal to power unrelated loads, and keep its return path close to the device ground.
推荐
工程参考数据: INA125PAG4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | INA125P | INA125PA |
|---|---|---|---|
| Device Type | Instrumentation amplifier with precision voltage reference | INA125-family instrumentation amplifier | INA125-family instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit |
| Integrated Voltage Reference | Yes | Yes | Yes |
| Package | 16-PDIP | 16-PDIP | 16-PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Mounting Type | Through-hole | Through-hole | Through-hole |
| Input Configuration | Differential input | Differential input | Differential input |
关键差异点
- Integrated precision reference in the same instrumentation-amplifier package (对比 INA125P)
- Differential signal conditioning with 500 microvolt input offset (对比 INA125PA)
- Through-hole industrial DIP implementation (对比 INA125P)
设计说明
Route the differential sensor inputs as a close, matched pair and connect the amplifier ground to the quiet analog-ground system. Keep the INA125PAG4 close to the bridge or sensor connector so that cable pickup is minimized before amplification. Place the input filtering and gain-setting components near the relevant pins, and avoid routing sensitive input traces beneath switching-regulator or digital-clock areas.
Do not select the gain solely from the nominal bridge output range. The maximum input differential voltage, common-mode range, output swing, supply voltage, reference load capability, and bandwidth all change with gain and operating conditions. Verify these limits in the INA125 datasheet, and include offset, gain error, drift, reference accuracy, and resistor tolerance in the measurement uncertainty budget.
For long sensor cables, use suitable input filtering and guarding rather than relying on the amplifier alone to reject noise. Maintain symmetric input paths, provide a stable analog reference return, and keep the reference node free from unwanted loading. When the signal bandwidth is close to the listed 150 kHz value, check gain-dependent bandwidth and output-swing behavior before selecting the final filter bandwidth.
The 16-pin DIP package is straightforward to assemble but does not minimize board area. Preserve the manufacturer's recommended decoupling connections and place them directly between the supply and ground pins. Keep the analog signal path away from the package's unused or adjacent digital-capable pins, and follow the datasheet pin configuration when assigning every net to avoid reversed power or reference connections.
合规信息
The available product excerpts identify the INA125 as a Texas Instruments industrial instrumentation amplifier but do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements.