Harris Corporation

ISL83385IA - 250kbps RS-232 Transceiver | Harris

料号: ISL83385IA ✗ 停产
+3 V to +5.5 V Vdss Approximately 1 µA Id 20-SSOP Package
最小起订量: 1 |

ISL83385IA 概述

The Harris ISL83385IA is a +3 V to +5.5 V RS-232 transmitter/receiver IC operating at 250 kbps, with approximately 1 µA supply current and ±15 kV ESD protection. The device is offered in a 20-SSOP package for compact industrial and embedded communication equipment.

An RS-232 transceiver combines a driver and receiver on one integrated circuit. It converts a host controller's logic-level transmit and receive signals into RS-232-compatible levels and converts incoming RS-232 levels back to logic. Within the device hierarchy, the ISL83385IA is an interface IC, a UART-interface component, and a physical-layer RS-232 transceiver used between digital systems and serial cabling.

Key characteristics include a 3 V to 5.5 V supply range, data signaling at up to 250 kbps, low supply current of approximately 1 µA, and ±15 kV ESD protection. These characteristics make the device suitable for low-power instruments, industrial control links, configuration ports, service interfaces, and embedded systems that exchange data over short RS-232 connections.

The transceiver integrates two transmit and two receive channels according to the family description. Integrated level translation allows a low-voltage host processor to communicate with equipment using the voltage levels defined for RS-232. Its low supply current supports compact battery-operated and portable designs, while the 20-SSOP package helps minimize PCB footprint.

Typical installations include industrial machine-to-controller links, laboratory instrument control, point-of-sale equipment, and service or programming ports. Because RS-232 is a single-ended, unbalanced interface, designers should keep cable runs practical, provide suitable grounding, and place protection components where cables enter an enclosure or industrial environment.

When designing the interface, check the logic levels, supply voltage, and cable termination requirements against the manufacturer's pin description and application information. Decoupling capacitors should be placed close to the supply pins, and external protection may still be required for severe conducted-noise or long outdoor cable environments.

This page consolidates the part's RS-232 interface characteristics, package information, procurement guidance, and application-oriented design notes. It also organizes drop-in candidates by electrical proximity so engineers can evaluate replacements before committing a PCB layout to a production design.

直接替换替代料: ISL83385IA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ISL83385EIA

✅ 直接替换
📦 20-SSOP
Same +3 V to +5.5 V supply and 250 kbps rating, with 0% difference in those headline electrical values; temperature-grade and pin-function options require confirmation.

📋 参考替代料(不在目录中)

ISL83385E

✅ 直接替换
📦 20-SSOP
Same +3 V to +5.5 V supply, 250 kbps rate, approximately 1 µA current, and ±15 kV ESD rating; package and temperature-grade suffixes differ.

📋 参考替代料(不在目录中)

ISL83385IA 规格参数

Product Type RS-232 Transmitter/Receiver
Supply Voltage Range +3 V to +5.5 V
Maximum Data Rate 250 kbps
电源电流 Approximately 1 µA
ESD Protection ±15 kV
Transmitter Channels 2
Receiver Channels 2
Interface Standard RS-232
封装 20-SSOP
安装类型 Surface Mount
RoHS 状态 unknown
REACH Status unknown
Automotive Qualification not_applicable

ISL83385IA 20-ssop 引脚配置指南

ISL83385IA(20-ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ISL83385IA 的 20-ssop 封装引脚图

暂无详细引脚数据: ISL83385IA.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ISL83385IA 适用于 6 应用s: Industrial Controller Service Port, Laboratory Instrument Control, Embedded Device Configuration Interface, Point-of-Sale and Peripheral Link, Portable Test and Measurement Unit, Battery-Powered Field Sensor Interface.

🏭

Industrial Controller Service Port

The ISL83385IA suits a service or configuration port that connects a 3.3 V or 5 V controller to industrial equipment over RS-232. Its 250 kbps capability provides ample margin for short command and response transfers, while approximately 1 µA supply current supports low-power operating states. The 20-SSOP surface-mount package saves board area compared with a larger through-hole arrangement. Confirm the temperature grade and exact pin functions in the manufacturer datasheet, and terminate the cable close to the equipment chassis to reduce stress on the transceiver.

🖥️

Laboratory Instrument Control

The ISL83385IA can connect laboratory measurement equipment to a host computer or embedded controller when a compact, low-power RS-232 interface is required. Its +3 V to +5.5 V operating range supports modern 3.3 V control electronics, and the 250 kbps maximum data rate is appropriate for short command-and-response protocols. The integrated ±15 kV ESD protection improves handling robustness, although instruments connected to long laboratory leads may benefit from external protection. Use the manufacturer recommended supply capacitance and place it adjacent to the device for reliable operation.

🧩

Embedded Device Configuration Interface

The ISL83385IA provides a compact bridge between an embedded controller and a legacy RS-232 configuration port. Its 250 kbps capability is more than sufficient for firmware-upload commands, diagnostic logs, and short parameter exchanges. Approximately 1 µA supply current makes the interface attractive in systems where the main controller sleeps between service operations. The surface-mount 20-SSOP package supports dense controller boards, but the exact enable, shutdown, and fault-reporting functions must be verified from the pin-description table before firmware is written.

💳

Point-of-Sale and Peripheral Link

The ISL83385IA can serve in point-of-sale peripherals, receipt equipment, or service terminals that expose an RS-232 port to a host system. The 250 kbps data rate supports transactional commands and short status exchanges, while its low supply current suits cost-sensitive and space-constrained designs. The +3 V to +5.5 V range allows connection to both legacy 5 V equipment and modern 3.3 V electronics. For cables routed through commercial environments, combine the integrated ESD protection with connector-side surge protection and maintain a low-impedance signal-ground path.

📊

Portable Test and Measurement Unit

A portable tester can use the ISL83385IA to communicate with fixtures or legacy peripherals through a short RS-232 cable. The approximately 1 µA supply current reduces standby burden, while the 250 kbps rate is suitable for binary measurement transfers and setup commands. Its 20-SSOP package leaves more PCB area for sensing, display, and power-management circuitry. Avoid relying only on the integrated ±15 kV ESD rating when a user-accessible connector may receive severe transients; add external protection and provide a stable reference ground.

🌐

Battery-Powered Field Sensor Interface

The ISL83385IA is appropriate for a battery-powered field device that periodically exchanges short packets with a service laptop or local controller. The low supply current of approximately 1 µA and the 3 V to +5.5 V range help align the transceiver with rechargeable-cell systems and modern low-power logic. The 250 kbps maximum rate allows rapid burst transfers without requiring a high-bandwidth physical layer. Because field cables can be long and exposed, add connector-side TVS protection, maintain a robust ground reference, and verify the operating-temperature grade in the manufacturer datasheet.

What is the operating voltage of the ISL83385IA?
The ISL83385IA operates from a +3 V to +5.5 V single supply, allowing it to connect with both 3.3 V and 5 V host systems. The manufacturer family description identifies the RS-232 transceiver as a +3 V to +5.5 V device. Designers should confirm the local rail voltage in the pin-description table before applying the interface to a board.
What is the maximum data rate of ISL83385IA?
The ISL83385IA supports data rates up to 250 kbps. This makes it appropriate for short-distance RS-232 links used in embedded controllers, laboratory instruments, and industrial equipment. The actual usable baud rate also depends on cable length, signal integrity, host timing, and the load presented by the connected equipment.
Where can I download the ISL83385IA datasheet PDF?
The ISL83385IA datasheet can be located through the manufacturer family documentation for the ISL83385E series and through the product document-search page linked on this page. Before layout release, use the pin-description table, recommended decoupling, and operating limits from the official manufacturer datasheet rather than relying on distributor summaries.
Is the ISL83385IA suitable for low-power designs?
Yes. The ISL83385IA family is specified at approximately 1 µA supply current and supports operation from +3 V to +5.5 V, making it suitable for low-power embedded and portable equipment. Confirm whether the active operating current or a shutdown control meets the power budget of the complete product before committing to the design.
What ESD protection does the ISL83385IA provide?
The ISL83385IA family provides ±15 kV ESD protection. That rating improves resilience to electrostatic discharge encountered during handling or connection of external RS-232 cables. For industrial installations, additional TVS, series impedance, and cable-routing measures may still be required for lightning or long-cable surge exposure.
What can replace the ISL83385IA?
ISL83385EIA is the closest same-family candidate identified, sharing the 20-SSOP format and the published +3 V to +5.5 V, 250 kbps, and ±15 kV characteristics. It is listed in the manufacturer family documentation, but engineers should compare temperature grade, shutdown behavior, and every pin function before treating it as a production substitute.
What is the difference between ISL83385IA and ISL83385EIA?
Both belong to the same 250 kbps, +3 V to +5.5 V RS-232 family and are associated with the 20-SSOP package. The suffix identifies different orderable variants, so the key checks are temperature grade, operating mode, and exact pin availability. The manufacturer datasheet must be compared line by line before using one as a drop-in replacement.
Is ISL83385IA the same as ISL83385EIA?
They are closely related family members rather than automatically identical functions. The published electrical headlines match at +3 V to +5.5 V, 250 kbps, approximately 1 µA, and ±15 kV ESD protection. They are not interchangeable until package pins, temperature range, shutdown behavior, and ordering options have been checked against the manufacturer datasheet.
When should I choose the ISL83385IA over another RS-232 transceiver?
Choose the ISL83385IA when a compact surface-mount implementation, a 3.3 V or 5 V supply, 250 kbps operation, and integrated ESD protection are the principal requirements. Consider an alternative only when it preserves the same package footprint, pin functions, supply range, logic levels, and timing while offering an advantage such as shutdown control or a different temperature grade.
Is the ISL83385IA suitable for industrial control systems?
The ISL83385IA is appropriate for short-range industrial control and configuration links because it provides ±15 kV ESD protection and 250 kbps data-rate capability. The exact operating-temperature rating must be checked in the manufacturer datasheet, and additional surge protection is advisable when RS-232 cables leave the enclosure or connect to long external wiring.
How should I protect an ISL83385IA RS-232 port?
Use the integrated ±15 kV ESD protection as the first protection layer, then add external TVS devices for exposed industrial cables. Keep protected and unprotected wiring separated, use a low-impedance ground reference, and place the protection network at the connector entry. Long outdoor cables may require additional coordinated surge protection beyond ESD protection.
What are the key specifications of ISL83385IA?
The principal ISL83385IA specifications are a +3 V to +5.5 V supply, operation up to 250 kbps, approximately 1 µA supply current, ±15 kV ESD protection, and a 20-SSOP surface-mount package. The family also contains two transmitters and two receivers. Pin-level voltage, timing, and temperature limits should be read from the official manufacturer datasheet.
Where can I buy ISL83385IA online?
Use the Request a Quote form on this page to request current availability, order quantities, and a purchase quotation for the ISL83385IA. The manufacturer and distributor product links listed in the data sources can also be used to confirm the historical part identity and locate the appropriate documentation.
What is the price of ISL83385IA?
Current pricing for the ISL83385IA is generated through the Request a Quote form on this page. Submit the required quantity, packaging preference, and delivery location so the quote reflects current component availability rather than a static catalog figure that may no longer reflect market conditions.
What is the lead time for ISL83385IA?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on inventory position, order quantity, approved packaging, and shipment destination. Providing the annual usage forecast and a firm prototype schedule helps the supplier confirm the appropriate sourcing route.
Is ISL83385IA currently in stock?
Confirm current ISL83385IA availability through the Request a Quote form on this page. Because this device is associated with an older Harris and Intersil product line, supply status can vary by market and order volume. Submit the required quantity and target date to obtain a current availability response.

工程参考数据: ISL83385IA ——对比、设计指导和合规信息。

选型指南

Choose the ISL83385IA for a compact 20-SSOP RS-232 interface that operates from +3 V to +5.5 V, supports up to 250 kbps, and includes approximately 1 µA supply current and ±15 kV ESD protection. It is appropriate for service ports, embedded configuration links, laboratory instruments, and low-power field devices. ISL83385EIA is the closest listed same-family candidate because it shares the 20-SSOP format and principal electrical ratings, but temperature grade, shutdown behavior, and every pin function must be verified before substitution. ISL83385E provides the same family ratings but requires the same detailed comparison. Do not select a candidate solely by package size: connector assignment, logic levels, timing, supply decoupling, and protection strategy must remain unchanged.

与替代料对比

参数 本产品 ISL83385EIA ISL83385E
Brand Harris Corporation Renesas Electronics Corporation Intersil Corporation
Package 20-SSOP 20-SSOP 20-SSOP
Device Type RS-232 Transmitter/Receiver 2/2 Transceiver, Full RS-232 RS-232 Transmitter/Receiver
Supply Voltage Range +3 V to +5.5 V +3 V to +5.5 V +3 V to +5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
Supply Current Approximately 1 µA Approximately 1 µA Approximately 1 µA
ESD Protection ±15 kV ±15 kV ±15 kV
Transmitter Channels 2 2 2
Receiver Channels 2 2 2

关键差异点

  • Matches the established ISL83385 electrical headline ratings (对比 ISL83385EIA)
  • Low supply current supports power-conscious interfaces (对比 ISL83385E)
  • Integrated ESD protection supports robust connector handling (对比 ISL83385EIA)

设计说明

Place the transceiver supply bypass capacitor directly beside the device power and ground pins, and route the connection with a short, low-impedance path. Keep the RS-232 connector and any external protection network away from sensitive analog or high-speed digital circuits. The small 20-SSOP footprint makes pin-level decoupling and ground-return routing particularly important.

Do not treat an RS-232 transceiver as a differential or long-distance communication solution. Confirm whether the interface includes transmit and receive data pins, shutdown control, and status indications before assigning connector signals. A candidate with the same package is not necessarily interchangeable unless every populated pin has the same electrical function and no connection changes are required.

RS-232 is an unbalanced interface, so cable routing and ground quality determine noise immunity. Keep the cable away from switching power nodes and high-current motor wiring, terminate the interface near the connector, and use a solid chassis or circuit-board ground reference. For exposed industrial cables, add connector-side TVS protection because the integrated ±15 kV ESD rating does not eliminate the need for surge protection.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No compliance declarations were identified for this exact orderable MPN. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with the manufacturer before release.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

ISL83385IA datasheet ISL83385IA datasheet pdf ISL83385IA pinout ISL83385IA 20-SSOP ISL83385IA equivalent ISL83385IA replacement ISL83385IA vs ISL83385EIA ISL83385IA RS-232 transceiver ISL83385IA 250kbps ISL83385IA 3V 5.5V ISL83385IA price ISL83385IA stock Harris ISL83385IA ISL83385IA industrial control interface

相关元器件 & 术语

Harris Corporation Renesas Electronics Corporation Intersil Corporation ISL83385IA ISL83385EIA ISL83385E RS-232 transceiver transmitter receiver UART interface IC serial communication ESD protection 20-SSOP surface mount 250 kbps 3 V to 5.5 V low supply current industrial control laboratory instrumentation embedded configuration port RS-232 transceiver
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情