Microchip Technology

KSZ8041MLLI-TR - 10/100 Ethernet PHY | Microchip Technology

料号: KSZ8041MLLI-TR ✓ 量产中
Single supply Vdss 48-LQFP, 7 x 7 mm Package
最小起订量: 1 |

KSZ8041MLLI-TR 概述

The Microchip Technology KSZ8041MLLI-TR is a single-supply 10BASE-T and 100BASE-TX Ethernet physical-layer transceiver with a Full MII interface, packaged in a 48-LQFP measuring 7 x 7 mm. The device supports MII, RMII, and SMII interfaces and provides automatic crossover through HP Auto MDI/MDI-X. Its mixed-signal design extends signaling distance while reducing power consumption, making it suitable for embedded Ethernet equipment, industrial controllers, access equipment, and network-connected products.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital MAC-layer data into signals suitable for twisted-pair cabling and reconstructs receive signals for the MAC controller. Within the network hierarchy, the KSZ8041 belongs to the PHY layer of an Ethernet interface: the PHY connects a digital bus such as MII, RMII, or SMII to analog 10BASE-T or 100BASE-TX line drivers and receivers. This separation allows a network controller or processor to manage traffic while the PHY handles cable-level signaling and link negotiation.

Key features include support for 10 Mb/s and 100 Mb/s operation, IEEE 802.3u auto-negotiation, and the broadcast PHY address 0 defined by the IEEE 802.3 specification. Auto-negotiation can be enabled through hardware pin strapping on pin 42 or through register 0, bit 12. The broadcast address allows a management system to read from or write to one device, or write to multiple KSZ8041 devices simultaneously, which is useful in managed network equipment.

The KSZ8041 uses a mixed-signal architecture designed to improve signaling distance and reduce power consumption. Its digital management interface includes MDC and MDIO, while interrupt signaling supports connection monitoring. The manufacturer hardware design checklist specifies a 4.7 kOhm pull-up on MDIO pin 18 when MDC/MDIO management is used. It also specifies a 4.7 kOhm external pull-up on INTRP pin 21 because that output is open-drain. These details are important when creating a new PCB because the management bus must operate at valid logic levels even before firmware configures the device.

Typical applications include industrial automation equipment, embedded network bridges, print servers, set-top and access equipment, and embedded systems that require 10/100 Ethernet connectivity over copper twisted-pair media. The Full MII interface is especially useful for designs requiring the complete parallel media-independent interface rather than the reduced pin count of RMII. For a new compact design, however, the smaller KSZ8041NLI-TR in a 32-QFN package may be easier to route when RMII operation is sufficient.

PCB implementation should follow the manufacturer's KSZ8041MLL Hardware Design Checklist and data sheet, particularly for magnetic-component selection, supply decoupling, RJ-45 integration, crystal or clock requirements, and management-interface pull-ups. Keep the digital interface and analog network section appropriately partitioned, provide a low-impedance ground return, and observe the required high-speed layout practices around the PHY and magnetics. The 48-LQFP package also requires adequate thermal spreading on denser boards where sustained line activity increases power dissipation.

直接替换替代料: KSZ8041MLLI-TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

KSZ8041MLLI-TR 规格参数

Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s
Digital Interface MII, RMII, and SMII
Target MPN Interface Configuration Full MII
Receiver/Transmitter Count 1 receiver and 1 transmitter
Supply Architecture Single supply
Cable Standard IEEE 802.3 10BASE-T and 100BASE-TX
Auto-Negotiation Enabled by pin 42 hardware strapping or register 0, bit 12
Broadcast PHY Address PHY address 0
Crossover Handling HP Auto MDI/MDI-X
封装 48-LQFP, 7 x 7 mm
Package Type Surface-mount LQFP
MDIO Pull-Up Requirement 4.7 kOhm on pin 18 when MDC/MDIO management is used
INTRP Pull-Up Requirement 4.7 kOhm on pin 21 for the open-drain output

KSZ8041MLLI-TR surface-mount lqfp 引脚配置指南

KSZ8041MLLI-TR(surface-mount lqfp 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

KSZ8041MLLI-TR 的 surface-mount lqfp 封装引脚图

暂无详细引脚数据: KSZ8041MLLI-TR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

KSZ8041MLLI-TR 适用于 6 应用s: Industrial Ethernet Controllers, Embedded Network Bridges, Network Access Equipment, Set-Top and Media Devices, Managed Network Interfaces, Secure Network Endpoints.

🏭

Industrial Ethernet Controllers

The KSZ8041MLLI-TR is suitable for industrial controllers that need a dedicated 10/100 Mb/s Ethernet front end. Its Full MII interface provides a broad parallel data path, while auto-negotiation through pin 42 or register 0, bit 12 lets the controller operate with either 10BASE-T or 100BASE-TX link partners. The mixed-signal design also targets reduced power consumption and extended signaling distance. In an industrial design, preserve the separation between digital circuitry and the Ethernet magnetics section, and use the manufacturer's 4.7 kOhm MDIO and INTRP pull-up guidance.

🌐

Embedded Network Bridges

Embedded bridges and protocol-conversion products can use the KSZ8041MLLI-TR as the copper-Ethernet endpoint for a host processor or communications controller. The 48-LQFP package exposes the Full MII interface and offers enough board space for controlled routing of the parallel bus. IEEE 802.3u auto-negotiation removes the need for manual speed selection, while HP Auto MDI/MDI-X simplifies connections using either straight-through or crossover cabling. Firmware should confirm negotiated speed, link status, and PHY address assignment during startup.

🖥️

Network Access Equipment

Access terminals and network interface modules can employ the KSZ8041MLLI-TR for a 10/100 Mb/s copper port. The broadcast PHY address 0 provides a useful management path for reading from or writing to a single PHY, or writing simultaneously to multiple KSZ8041 devices. Its HP Auto MDI/MDI-X support simplifies field cabling, and the auto-negotiation implementation selects the highest common mode with the connected equipment. Designers should follow the manufacturer data sheet when arranging the isolated network interface, magnetics, and supply-return path.

📺

Set-Top and Media Devices

The KSZ8041MLLI-TR can provide a network connection in set-top boxes, media appliances, and other products that exchange data over 10BASE-T or 100BASE-TX Ethernet. The Full MII interface supports a conventional parallel MAC connection, while software-controlled auto-negotiation allows firmware to adapt to the available link speed. Its single-supply mixed-signal implementation is intended to reduce power use compared with more demanding interface arrangements. Product teams should budget board area for the 48-LQFP device and its supporting magnetics while maintaining the required layout geometry.

🔧

Managed Network Interfaces

Managed network interfaces benefit from the KSZ8041MLLI-TR's support for broadcast PHY address 0 and MDC/MDIO management. A controller can use the management bus to configure or monitor PHY behavior, including the register-controlled auto-negotiation path in register 0, bit 12. The MDIO signal on pin 18 requires a 4.7 kOhm pull-up when the management interface is active, and the open-drain INTRP output on pin 21 requires a 4.7 kOhm external pull-up. These details should be incorporated into the bus topology and reset sequencing early in the schematic design.

📥

Secure Network Endpoints

Networked monitoring and security endpoints can use the KSZ8041MLLI-TR to add 10/100 Mb/s Ethernet connectivity to an embedded controller. Automatic crossover handling reduces cabling configuration errors in deployed equipment, while auto-negotiation supports operation across mixed 10 Mb/s and 100 Mb/s environments. The device's broadcast management capability can assist multi-PHY system administration. Designers should isolate the network-media section, follow the manufacturer hardware design checklist, and verify system EMC and security requirements alongside the electrical interface design.

What is the KSZ8041MLLI-TR?
The KSZ8041MLLI-TR is a Microchip Technology single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with a Full MII interface. According to the Microchip KSZ8041TL/FTL/MLL data sheet, it supports MII, RMII, and SMII interfaces, HP Auto MDI/MDI-X, and IEEE 802.3u auto-negotiation. The specified target package is a 48-LQFP measuring 7 x 7 mm.
Where can I download the KSZ8041MLLI-TR datasheet PDF?
The official manufacturer data sheet is available from Microchip Technology at https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/00002436B.pdf. It covers the KSZ8041TL, KSZ8041FTL, and KSZ8041MLL family, including electrical characteristics, register information, and application guidance. The KSZ8041MLLI-TR ordering code corresponds to the KSZ8041MLL 48-LQFP configuration.
Where can I find the KSZ8041MLLI-TR pinout?
The KSZ8041MLLI-TR pin assignment is published in the KSZ8041TL/FTL/MLL manufacturer data sheet and is organized by the 48-LQFP package drawing. Use that pin-description table when assigning PCB tracks and confirming the Full MII, clock, power, management, and interrupt functions. The hardware design checklist also identifies MDIO as pin 18, INTRP as pin 21, and the auto-negotiation strap as pin 42.
What Ethernet speeds does KSZ8041MLLI-TR support?
The KSZ8041MLLI-TR supports 10 Mb/s 10BASE-T and 100 Mb/s 100BASE-TX operation over twisted-pair cabling. According to the manufacturer data sheet, auto-negotiation follows the IEEE 802.3u process and lets the PHY select the highest common operating mode with the link partner. Auto-negotiation can be enabled by hardware strapping on pin 42 or through register 0, bit 12.
How does the KSZ8041MLLI-TR configure auto-negotiation?
The KSZ8041MLLI-TR can enable auto-negotiation through either the hardware auto-negotiation strap on pin 42 or software control through register 0, bit 12. According to the manufacturer data sheet, this IEEE 802.3u mechanism lets connected devices negotiate the highest common mode. Hardware strapping is useful for fixed network behavior, while software configuration provides more flexibility during product initialization.
What is the best drop-in replacement for KSZ8041MLLI-TR?
No independently verified 48-LQFP drop-in replacement for the exact KSZ8041MLLI-TR was identified. The KSZ8041NLI-TR uses a different 32-QFN package, so it cannot replace the 48-LQFP device without changing the PCB footprint. The KSZ8051MLLI-TR is a related candidate, but the manufacturer pin and parameter details must be checked before it is approved as a true pin-to-pin substitute.
Can KSZ8041NLI-TR replace KSZ8041MLLI-TR?
The KSZ8041NLI-TR cannot serve as a direct drop-in replacement for the KSZ8041MLLI-TR because their packages differ. The target KSZ8041MLLI-TR uses a 48-LQFP package with Full MII, whereas the KSZ8041NLI-TR uses a 32-QFN package and supports MII/RMII functions. A PCB redesign or adapter would be required rather than a component substitution.
When should I choose KSZ8041MLLI-TR instead of KSZ8041NLI-TR?
Choose the KSZ8041MLLI-TR when an existing 48-LQFP design requires Full MII and the 7 x 7 mm footprint is already routed. Choose the KSZ8041NLI-TR when a new design can use its smaller 32-QFN package and does not need the target device's Full MII configuration. The decision is primarily package and routing driven because these options do not share a drop-in footprint.
Is the KSZ8041MLLI-TR suitable for industrial Ethernet equipment?
The KSZ8041MLLI-TR is suitable for 10/100 Mb/s copper-Ethernet equipment, including industrial controllers, access products, and embedded network interfaces, subject to temperature and system-certification requirements. Its single-supply mixed-signal design, HP Auto MDI/MDI-X, and auto-negotiation reduce external crossover-management requirements. Confirm the device's specified operating temperature range and industrial EMC requirements before releasing a production design.
What pull-ups are required for KSZ8041MLLI-TR management and interrupt pins?
The manufacturer hardware design checklist requires a 4.7 kOhm pull-up on MDIO pin 18 when the MDC/MDIO management interface is used. It also requires a 4.7 kOhm external pull-up on INTRP pin 21 because INTRP is an open-drain output. Install these pull-ups according to the checklist and the final host-bus topology, and verify that the selected resistance remains compatible with the system bus capacitance and speed.
What is the KSZ8041MLLI-TR price?
Use the Request a Quote form on this page for a current quotation for KSZ8041MLLI-TR. The structured pricing panel reflects the latest available commercial data and can change with market conditions, quantity, and sourcing status. For a firmware-compatible or footprint-compatible substitution, include the required 48-LQFP package and Full MII interface in the request.
Can I buy KSZ8041MLLI-TR online and what is its lead time?
The Request a Quote form on this page is the appropriate route to request KSZ8041MLLI-TR availability, current lead time, and minimum order quantity. Include the exact KSZ8041MLLI-TR ordering code and the required reel or tray packaging in the request. Production planning should rely on the confirmed lead-time response rather than an unverified availability estimate.
Is KSZ8041MLLI-TR in stock?
Current KSZ8041MLLI-TR stock status should be requested through the Request a Quote form on this page. The form lets buyers specify the exact package code, quantity, and target delivery requirements for a sourcing response. Because inventory can change rapidly, treat availability as confirmed only after receiving the quotation response.
What can replace the KSZ8041MLLI-TR?
A valid replacement must match the 48-LQFP footprint, preserve pin-to-pin connectivity, and maintain the required Full MII and Ethernet PHY functions. The KSZ8051MLLI-TR is a same-brand candidate that merits a pin-level review, but replacement approval should follow a comparison of its MII, power, clock, management, reset, and magnetics-related functions. Do not substitute the KSZ8041NLI-TR because its 32-QFN package requires a PCB change.
What are the key specifications of KSZ8041MLLI-TR that engineers should know?
The key specifications are 10BASE-T and 100BASE-TX operation, Full MII operation, MII/RMII/SMII interface support, single-supply operation, and a 48-LQFP 7 x 7 mm package. The device also includes HP Auto MDI/MDI-X, IEEE 802.3u auto-negotiation, broadcast PHY address 0, and software or pin-strap configuration. Its MDIO and open-drain INTRP paths require specified 4.7 kOhm pull-ups.

工程参考数据: KSZ8041MLLI-TR ——对比、设计指导和合规信息。

选型指南

Choose the KSZ8041MLLI-TR for an existing 48-LQFP Ethernet PHY footprint that requires the Full MII interface and 10/100 Mb/s copper connectivity. Its 7 x 7 mm LQFP package is larger than the 32-QFN KSZ8041NLI-TR, but it provides a direct choice for boards already designed around that footprint. Choose the KSZ8041NLI-TR for a new board when the smaller package and its MII/RMII configuration satisfy the system, accepting that it is not a physical drop-in replacement. Evaluate the KSZ8051MLLI-TR as a possible same-brand upgrade candidate, but verify its pin assignments, clocking, power, management, and PHY-register compatibility before substitution. For any selected device, confirm the interface mode, magnetics, supply requirements, auto-negotiation behavior, and operating temperature requirements against the complete system design.

与替代料对比

参数 本产品
Brand Microchip Technology
Package 48-LQFP, 7 x 7 mm
Supported Ethernet Rates 10 Mb/s and 100 Mb/s
Digital Interfaces MII, RMII, and SMII
Target Ordering Configuration Full MII
Supply Architecture Single supply
Auto-Negotiation IEEE 802.3u
Crossover Handling HP Auto MDI/MDI-X
Broadcast PHY Address PHY address 0
Management Pull-Up 4.7 kOhm on MDIO pin 18
Interrupt Pull-Up 4.7 kOhm on INTRP pin 21
Mounting Type Surface mount

关键差异点

  • Full MII configuration in a 48-LQFP package (对比 KSZ8041NLI-TR)
  • Flexible auto-negotiation activation (对比 KSZ8041NLI-TR)
  • Management support for multi-PHY equipment (对比 KSZ8041NLI-TR)

设计说明

Follow the manufacturer KSZ8041MLL Hardware Design Checklist for the 48-LQFP placement, magnetics, clock, supply, and network-interface layout. Keep the Full MII digital bus compact and route it away from the analog network section. Preserve the specified component clearances and copper geometry around the PHY and magnetics because these constraints support reliable 100BASE-TX operation and reduce sensitivity to external interference.

Design the single-supply rail around the manufacturer's specified operating limits, which are listed as [DATA_NEEDED: supply voltage range]. Place the required supply-decoupling network close to the relevant power pins and provide a quiet return path for the digital and analog sections. Validate startup, reset, and link-up behavior across the complete supported input-voltage range rather than assuming a nominal supply is sufficient.

Do not omit the external pull-ups required by the manufacturer's hardware design checklist: use 4.7 kOhm on MDIO pin 18 when the management bus is used and 4.7 kOhm on open-drain INTRP pin 21. Also avoid treating the KSZ8041NLI-TR as a direct substitute because it uses a 32-QFN package. Validate auto-negotiation configuration, the pin-42 strap, and the MDIO/MDC address arrangement before releasing firmware.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer data sheet identifies IEEE 802.3 and IEEE 802.3u networking requirements. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses were not stated in the available product information and are therefore recorded as unknown.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

KSZ8041MLLI-TR KSZ8041MLLI-TR datasheet KSZ8041MLLI-TR datasheet pdf KSZ8041MLLI-TR pinout KSZ8041MLLI-TR equivalent KSZ8041MLLI-TR replacement KSZ8041MLLI-TR price KSZ8041MLLI-TR stock KSZ8041 48-LQFP ethernet PHY KSZ8041 Full MII transceiver KSZ8041MLLI-TR vs KSZ8041NLI-TR KSZ8041 auto-negotiation configuration KSZ8041 Ethernet application circuit

相关元器件 & 术语

Microchip Technology KSZ8041MLLI-TR KSZ8041 KSZ8041NLI-TR KSZ8051MLLI-TR Ethernet physical-layer transceiver Ethernet PHY 10BASE-T 100BASE-TX Full MII MII RMII SMII IEEE 802.3 IEEE 802.3u Auto-negotiation HP Auto MDI/MDI-X MDIO MDC INTRP 48-LQFP LQFP family surface-mount technology mixed-signal transceiver broadcast PHY address 0
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情