LC4384C-5T176C - 176-LQFP In-System Programmable CPLD | Lattice
料号: LC4384C-5T176C ✗ 停产LC4384C-5T176C 概述
A CPLD is a user-programmable digital semiconductor that combines nonvolatile programmable interconnect logic with configurable logic blocks. In the broader device hierarchy, a CPLD is a programmable logic device, a form of digital semiconductor and an alternative to a mask-programmed application-specific integrated circuit. Its practical advantage is that logic can be changed during development, often without changing the PCB layout.
The LC4384C family is identified as a Super Fast High Density PLD family with in-system programmability. This makes it useful where a prototype must be revised after board bring-up or where production quantities do not justify a full custom ASIC mask set. The 176-pin LQFP package also provides a comparatively large number of package connections, allowing the implementation to use more device I/O than a small leaded CPLD package.
Programming and design work require the appropriate Lattice device support tools, a programming cable, and a valid JEDEC-compatible configuration file. Engineers should verify pin assignments, supported I/O standards, and power architecture against the manufacturer datasheet before schematic capture. The available product data does not state the device’s logic-element count, maximum clock frequency, I/O standard set, or operating-temperature range.
Typical uses include industrial control, communications interface logic, instrumentation, test equipment, and embedded system support functions. The reprogrammable architecture is especially useful for legacy product refreshes that require a logic revision after certification or when several board variants share a common design.
For PCB implementation, treat the 176-pin LQFP footprint and its pin assignments as the controlling interface to the original design. Confirm the device’s supported supply configuration and I/O voltage domains, provide the required decoupling, and keep configuration and programming access routed for reliable in-system programming.
This page consolidates the verified device identity, package information, sourcing constraints, and replacement analysis into a structured engineering reference. It also distinguishes confirmed drop-in candidates from options that cannot yet be proven equivalent without device-level pin, timing, voltage, and programming compatibility checks.
直接替换替代料: LC4384C-5T176C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LC4384C-5T176C (相同外形与封装尺寸) ——差异在于 Device Type, Mounting Type, Package, Product Family.
LC4384V-5T176C
✅ 直接替换联系询价
查看数据手册 →LC4384C-75T176I
✅ 直接替换📋 参考替代料(不在目录中)
LC4384C-5T176I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LC4384C-5T176C 最大额定值与电气特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Programmable Architecture | In-System Programmable |
| Product Family | LC4384C Super Fast High Density PLD |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| 封装 | 176-pin LQFP |
| 安装类型 | Surface Mount |
LC4384C-5T176C 176-pin lqfp 引脚配置指南
LC4384C-5T176C(176-pin lqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LC4384C-5T176C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LC4384C-5T176C 适用于 6 应用s: Industrial Control Logic, Communications Interface Conditioning, Test and Measurement Instrumentation, Instrumentation Signal Routing, Embedded System Support Logic, Legacy Product Refresh.
Industrial Control Logic
The LC4384C-5T176C is suitable for consolidating deterministic control functions such as interlocks, sequencing, alarm handling, and actuator-command logic into one programmable device. Its in-system programmability allows control revisions to be performed after board assembly, reducing the need for a PCB respin during industrial product qualification. The 176-pin LQFP package also offers many package connections for external interfaces, although the exact usable I/O count must be confirmed in the device pin table. Before release, verify logic-element capacity, timing margin, supported I/O standards, and the required industrial temperature grade against the system specification.
推荐
Communications Interface Conditioning
The LC4384C-5T176C can implement protocol framing, command decoding, byte alignment, status tracking, and programmable I/O conditioning around a communications subsystem. As an in-system programmable CPLD, it allows interface logic to be revised without replacing the surrounding controller or changing the board footprint. Its broad package connection count is useful when the design combines several slow and fast peripheral signals. However, input thresholds, output drive capability, I/O voltage domains, and maximum operating frequency must be matched to the communication interface and checked against the manufacturer timing tables.
推荐
Test and Measurement Instrumentation
The LC4384C-5T176C can support programmable sequencing, trigger routing, measurement control, and front-panel state logic in test and measurement equipment. In-system programmability is valuable when calibration sequences or instrument-control behavior evolve during development, because the control configuration can be updated without replacing the board. The large LQFP package provides access to numerous control and status signals, subject to the device’s actual I/O allocation. Designers should verify pin-supported standards, clock-frequency limits, output timing, and supply requirements, then validate programming and isolation behavior with the complete instrument architecture.
推荐
Instrumentation Signal Routing
The LC4384C-5T176C can be used to route, qualify, and synchronize signals between analog front-end circuits, data converters, and a system controller. A CPLD is appropriate when the routing rules must be programmable and deterministic rather than permanently wired. The device’s in-system programming capability permits alternate routing tables or calibration modes to be loaded during commissioning. Signal-integrity work still depends on the actual I/O standards and timing specifications, which must be extracted from the manufacturer datasheet. PCB placement should minimize long parallel routes and provide clean, decoupled supply references for each supported voltage domain.
推荐
Embedded System Support Logic
The LC4384C-5T176C can implement glue logic, address decoding, interrupt control, watchdog supervision, peripheral arbitration, and power-state sequencing around a processor or microcontroller. The reprogrammable architecture supports product variants that share one PCB but require different control configurations. Its 176-pin LQFP package is useful when legacy designs require numerous deterministic digital connections without resorting to multiple simple logic devices. Integration checks should include signal direction, pull-up or pull-down requirements, I/O voltage compatibility, clock-domain relationships, and programming access. The engineer should also confirm that the selected device still has sufficient logic capacity for the complete design.
推荐
Legacy Product Refresh
The LC4384C-5T176C is relevant to legacy product refresh programs where an existing CPLD board must be replicated, maintained, or adapted for a longer production run. Because the device is programmable, a controlled logic migration can preserve the 176-LQFP board architecture while allowing functional updates. A replacement review should compare device identifiers, pin assignments, supply pins, I/O standards, timing, configuration interface, and programming software. LC4384V-5T176C may serve as a same-family candidate, but it should not be approved solely because the package matches; the electrical and qualification differences must be demonstrated to be acceptable.
推荐
推荐产品汇总
工程参考数据: LC4384C-5T176C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LC4384V-5T176C | LC4384C-75T176I | LC4384C-5T176I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 176-LQFP | 176-LQFP | 176-LQFP | 176-LQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Product Family | LC4384C Super Fast High Density PLD | LC4384 family | LC4384C Super Fast High Density PLD | LC4384C Super Fast High Density PLD |
| Speed Designation | -5 | -5 | -75 | -5 |
| Temperature-Grade Suffix | C | C | I | I |
| In-System Programmable | Yes | Yes | Yes | Yes |
关键差异点
- Exact original family and package configuration (对比 LC4384C-75T176I)
- Commercial-grade suffix for legacy production continuity (对比 LC4384C-5T176I)
- Verified same-family package continuity (对比 LC4384V-5T176C)
设计说明
Route the LC4384C-5T176C as a 176-pin LQFP component and preserve the manufacturer land pattern, pin-one orientation, and exposed pad treatment defined for the exact ordering code. Place configuration-access signals where the programming fixture can reach them without removing the assembled board. Confirm every power and ground connection against the device pin table rather than relying on the package name alone.
Separate the core supply and I/O supply requirements before assigning decoupling. The device family supports 3.3 V, 2.5 V, and 1.8 V options, but the exact arrangement and tolerances for this ordering code must be taken from the electrical-characteristics section. Use short ground returns, place local high-frequency bypass capacitors at the relevant supply pins, and avoid sharing return paths with switching regulators or high-current loads.
Assign clock, configuration, and high-speed user signals according to the device timing and I/O-standard specifications. Keep programming or configuration traces away from noisy switching nodes, provide a clean return path, and observe any setup and hold constraints associated with configuration access. If the design mixes multiple voltage domains, verify that every attached driver remains within the selected I/O domain and that external level translation does not overload the device.
Do not treat the C, V, I, -5, or -75 suffix differences as cosmetic. Speed code, device revision, and temperature grade can affect qualification and timing, while the C-versus-V designation can affect electrical characteristics. Before substituting any listed candidate, compare the complete pin descriptions, operating limits, timing tables, and programming configuration file support, then perform timing simulation and board-level validation.
合规信息
The available device listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance for the exact ordering code, manufacturing lot, and date code before procurement.