LC4384C-5T176C - 176-LQFP In-System Programmable CPLD | Lattice
부품 번호: LC4384C-5T176C ✗ 단종LC4384C-5T176C 개요
A CPLD is a user-programmable digital semiconductor that combines nonvolatile programmable interconnect logic with configurable logic blocks. In the broader device hierarchy, a CPLD is a programmable logic device, a form of digital semiconductor and an alternative to a mask-programmed application-specific integrated circuit. Its practical advantage is that logic can be changed during development, often without changing the PCB layout.
The LC4384C family is identified as a Super Fast High Density PLD family with in-system programmability. This makes it useful where a prototype must be revised after board bring-up or where production quantities do not justify a full custom ASIC mask set. The 176-pin LQFP package also provides a comparatively large number of package connections, allowing the implementation to use more device I/O than a small leaded CPLD package.
Programming and design work require the appropriate Lattice device support tools, a programming cable, and a valid JEDEC-compatible configuration file. Engineers should verify pin assignments, supported I/O standards, and power architecture against the manufacturer datasheet before schematic capture. The available product data does not state the device’s logic-element count, maximum clock frequency, I/O standard set, or operating-temperature range.
Typical uses include industrial control, communications interface logic, instrumentation, test equipment, and embedded system support functions. The reprogrammable architecture is especially useful for legacy product refreshes that require a logic revision after certification or when several board variants share a common design.
For PCB implementation, treat the 176-pin LQFP footprint and its pin assignments as the controlling interface to the original design. Confirm the device’s supported supply configuration and I/O voltage domains, provide the required decoupling, and keep configuration and programming access routed for reliable in-system programming.
This page consolidates the verified device identity, package information, sourcing constraints, and replacement analysis into a structured engineering reference. It also distinguishes confirmed drop-in candidates from options that cannot yet be proven equivalent without device-level pin, timing, voltage, and programming compatibility checks.
드롭인 대체품: LC4384C-5T176C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4384C-5T176C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Mounting Type, Package, Product Family.
LC4384V-5T176C
✅ 드롭인가격 문의
데이터시트 보기 →LC4384C-75T176I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4384C-5T176I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LC4384C-5T176C 최대 정격 & 전기적 특성
| Device Type | Complex Programmable Logic Device (CPLD) |
| Programmable Architecture | In-System Programmable |
| Product Family | LC4384C Super Fast High Density PLD |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| 패키지 | 176-pin LQFP |
| 실장 유형 | Surface Mount |
LC4384C-5T176C 176-pin lqfp 핀 구성 가이드
LC4384C-5T176C(176-pin lqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4384C-5T176C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4384C-5T176C 적합 용도: 6 애플리케이션s: Industrial Control Logic, Communications Interface Conditioning, Test and Measurement Instrumentation, Instrumentation Signal Routing, Embedded System Support Logic, Legacy Product Refresh.
Industrial Control Logic
The LC4384C-5T176C is suitable for consolidating deterministic control functions such as interlocks, sequencing, alarm handling, and actuator-command logic into one programmable device. Its in-system programmability allows control revisions to be performed after board assembly, reducing the need for a PCB respin during industrial product qualification. The 176-pin LQFP package also offers many package connections for external interfaces, although the exact usable I/O count must be confirmed in the device pin table. Before release, verify logic-element capacity, timing margin, supported I/O standards, and the required industrial temperature grade against the system specification.
추천
Communications Interface Conditioning
The LC4384C-5T176C can implement protocol framing, command decoding, byte alignment, status tracking, and programmable I/O conditioning around a communications subsystem. As an in-system programmable CPLD, it allows interface logic to be revised without replacing the surrounding controller or changing the board footprint. Its broad package connection count is useful when the design combines several slow and fast peripheral signals. However, input thresholds, output drive capability, I/O voltage domains, and maximum operating frequency must be matched to the communication interface and checked against the manufacturer timing tables.
추천
Test and Measurement Instrumentation
The LC4384C-5T176C can support programmable sequencing, trigger routing, measurement control, and front-panel state logic in test and measurement equipment. In-system programmability is valuable when calibration sequences or instrument-control behavior evolve during development, because the control configuration can be updated without replacing the board. The large LQFP package provides access to numerous control and status signals, subject to the device’s actual I/O allocation. Designers should verify pin-supported standards, clock-frequency limits, output timing, and supply requirements, then validate programming and isolation behavior with the complete instrument architecture.
추천
Instrumentation Signal Routing
The LC4384C-5T176C can be used to route, qualify, and synchronize signals between analog front-end circuits, data converters, and a system controller. A CPLD is appropriate when the routing rules must be programmable and deterministic rather than permanently wired. The device’s in-system programming capability permits alternate routing tables or calibration modes to be loaded during commissioning. Signal-integrity work still depends on the actual I/O standards and timing specifications, which must be extracted from the manufacturer datasheet. PCB placement should minimize long parallel routes and provide clean, decoupled supply references for each supported voltage domain.
추천
Embedded System Support Logic
The LC4384C-5T176C can implement glue logic, address decoding, interrupt control, watchdog supervision, peripheral arbitration, and power-state sequencing around a processor or microcontroller. The reprogrammable architecture supports product variants that share one PCB but require different control configurations. Its 176-pin LQFP package is useful when legacy designs require numerous deterministic digital connections without resorting to multiple simple logic devices. Integration checks should include signal direction, pull-up or pull-down requirements, I/O voltage compatibility, clock-domain relationships, and programming access. The engineer should also confirm that the selected device still has sufficient logic capacity for the complete design.
추천
Legacy Product Refresh
The LC4384C-5T176C is relevant to legacy product refresh programs where an existing CPLD board must be replicated, maintained, or adapted for a longer production run. Because the device is programmable, a controlled logic migration can preserve the 176-LQFP board architecture while allowing functional updates. A replacement review should compare device identifiers, pin assignments, supply pins, I/O standards, timing, configuration interface, and programming software. LC4384V-5T176C may serve as a same-family candidate, but it should not be approved solely because the package matches; the electrical and qualification differences must be demonstrated to be acceptable.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4384C-5T176C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4384V-5T176C | LC4384C-75T176I | LC4384C-5T176I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 176-LQFP | 176-LQFP | 176-LQFP | 176-LQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Product Family | LC4384C Super Fast High Density PLD | LC4384 family | LC4384C Super Fast High Density PLD | LC4384C Super Fast High Density PLD |
| Speed Designation | -5 | -5 | -75 | -5 |
| Temperature-Grade Suffix | C | C | I | I |
| In-System Programmable | Yes | Yes | Yes | Yes |
주요 차별점
- Exact original family and package configuration (vs LC4384C-75T176I)
- Commercial-grade suffix for legacy production continuity (vs LC4384C-5T176I)
- Verified same-family package continuity (vs LC4384V-5T176C)
설계 노트
Route the LC4384C-5T176C as a 176-pin LQFP component and preserve the manufacturer land pattern, pin-one orientation, and exposed pad treatment defined for the exact ordering code. Place configuration-access signals where the programming fixture can reach them without removing the assembled board. Confirm every power and ground connection against the device pin table rather than relying on the package name alone.
Separate the core supply and I/O supply requirements before assigning decoupling. The device family supports 3.3 V, 2.5 V, and 1.8 V options, but the exact arrangement and tolerances for this ordering code must be taken from the electrical-characteristics section. Use short ground returns, place local high-frequency bypass capacitors at the relevant supply pins, and avoid sharing return paths with switching regulators or high-current loads.
Assign clock, configuration, and high-speed user signals according to the device timing and I/O-standard specifications. Keep programming or configuration traces away from noisy switching nodes, provide a clean return path, and observe any setup and hold constraints associated with configuration access. If the design mixes multiple voltage domains, verify that every attached driver remains within the selected I/O domain and that external level translation does not overload the device.
Do not treat the C, V, I, -5, or -75 suffix differences as cosmetic. Speed code, device revision, and temperature grade can affect qualification and timing, while the C-versus-V designation can affect electrical characteristics. Before substituting any listed candidate, compare the complete pin descriptions, operating limits, timing tables, and programming configuration file support, then perform timing simulation and board-level validation.
규정 준수 정보
The available device listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance for the exact ordering code, manufacturing lot, and date code before procurement.