Lattice Semiconductor

LFE2-6SE-5T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor

料号: LFE2-6SE-5T144C ✓ 量产中
1.2 V Vdss 144-LQFP Package -5 Speed 8.4 kB Memory
最小起订量: 1 |

LFE2-6SE-5T144C 概述

Lattice Semiconductor LFE2-6SE-5T144C is an ECP2 field-programmable gate array with 6,000 logic cells, 6K LUTs, and 90 user I/O in a 144-LQFP package. It operates from a 1.2 V core supply and is identified with a -5 speed grade in the product listing. The device also includes S-Series DSP capability, making it suitable for compact control, interface, signal-processing, and embedded programmable-logic designs that require deterministic parallel I/O in a moderate pin-count package.

An FPGA is a reconfigurable semiconductor whose logic, routing, and digital signal-processing resources can be programmed after manufacture. In the product hierarchy, the LFE2-6SE-5T144C is a programmable logic device, an FPGA, and specifically a member of the Lattice ECP2 family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows parallel interface logic, control sequences, and DSP operations to be consolidated into one device while retaining field-updatable configurations.

The ECP2 architecture provides 6K LUTs, 90 I/O, and S-Series DSP resources in the 144-LQFP configuration. The 1.2 V operating voltage identifies the device as a modern FPGA intended for integration with contemporary digital logic, while the -5 designation denotes the listed speed grade. The 144-pin LQFP package provides substantially more I/O than a small FPGA package and is practical for parallel buses, memory interfaces, control logic, and external data acquisition functions.

Technical selection must account for both architecture and board constraints. ECP2 devices share a programmable platform, but ordering suffixes can distinguish speed grade, temperature grade, and package-related ordering options. Because FPGA configuration determines the implemented logic, designers should verify the exact device pinout, configuration interface, supported I/O standards, clocking resources, and power requirements in the LatticeECP2/M Family Data Sheet before committing the PCB footprint.

Typical uses include industrial control modules, sensor and measurement interfaces, communication protocol bridges, audio or control DSP, and general-purpose embedded logic. The 90-I/O count is especially useful when several buses or discrete digital interfaces must be consolidated. The S-Series DSP resources can accelerate multiply-accumulate-oriented operations, although final throughput depends on the selected clock, routing, and logic architecture.

PCB implementation requires careful attention to the 144-LQFP footprint, 1.2 V supply quality, decoupling, configuration access, and I/O assignment. Place bypass capacitors close to the supply pins, preserve a continuous return path, and follow the manufacturer's pin and layout guidance for the selected ECP2 package. Designers should also account for unused pins and configuration behavior in their board-level validation.

This page organizes the published Lattice ECP2 specifications, same-package ordering alternatives, application guidance, and practical implementation notes. It supports design triage for the LFE2-6SE-5T144C by connecting resource counts, package capacity, speed-grade differences, and replacement constraints while directing final electrical and pin-level decisions to the manufacturer documentation.

直接替换替代料: LFE2-6SE-5T144C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LFE2-6SE-5T144C (相同外形与封装尺寸) ——差异在于 Package, Speed Grade, Core Supply Voltage, DSP Capability, Device Type.

Lattice Semiconductor
Package: 144-pin TQFP/LQFP
Speed Grade: -6
DSP Capability: DSP-oriented programmable logic
对比 LFE2-6SE-5T144C →
Lattice Semiconductor
Speed Grade: -6
Device Type: ECP2 Field Programmable Gate Array (FPGA)
对比 LFE2-6SE-5T144C →
Lattice Semiconductor
Package: 144-pin TQFP
Speed Grade: -7
Core Supply Voltage: 1.14 V to 1.26 V
对比 LFE2-6SE-5T144C →

LFE2-6SE-6T144C

✅ 直接替换
Lattice Semiconductor
📦 144-LQFP
ECP2 field-programmable gate array (FPGA) · 6,000 cells · 56,320 registers · 90 I/O · 90 nm · 1.2 V · -6 · 144-pin TQFP/LQFP

联系询价

查看数据手册 →

LFE2-6SE-6TN144C

✅ 直接替换 ⚠️ 规格未核验
📦 144-LQFP
Speed grade changes from -5 to -6 and the temperature ordering changes from standard to N grade; core voltage, LUT count, and I/O count remain listed as 1.2 V, 6K, and 90.

📋 参考替代料(不在目录中)

LFE2-6SE-6T144I

✅ 直接替换 ⚠️ 规格未核验
Lattice Semiconductor
📦 144-LQFP
ECP2 Field Programmable Gate Array (FPGA) · 6,000 cells · 6K LUTs · 90 I/O · 1.2 V · -6 · I · S-Series DSP

联系询价

查看数据手册 →

LFE2-6SE-6TN144I

✅ 直接替换
📦 144-LQFP
Speed grade changes from -5 to -6 and the ordering changes to N and I temperature options; listed electrical resources remain 1.2 V, 6K LUTs, and 90 I/O.

📋 参考替代料(不在目录中)

LFE2-6SE-7T144C

✅ 直接替换 ⚠️ 规格未核验
Lattice Semiconductor
📦 144-LQFP
LatticeECP2 · 6000 logic elements · 750 LABs · 56320 bits · 90 I/O · 1.14 V to 1.26 V · 1.2 V · -7

联系询价

查看数据手册 →

LFE2-6SE-7TN144C

✅ 直接替换
📦 144-LQFP
Speed grade changes from -5 to -7 and the temperature ordering changes from standard to N grade; voltage, LUT count, I/O count, and package remain listed as 1.2 V, 6K, 90, and 144-LQFP.

📋 参考替代料(不在目录中)

LFE2-6SE-5T144C 最大额定值与电气特性

Device Type ECP2 field-programmable gate array (FPGA)
Logic Cell Count 6,000 cells
Look-Up Table Count 6K LUTs
User I/O Count 90 I/O
Core Supply Voltage 1.2 V
Speed Grade -5
DSP Capability S-Series DSP
封装 144-LQFP
Package Pin Count 144 pins
Package Body Size 20 mm x 20 mm
Package Pitch 0.5 mm
安装类型 Surface mount
Configuration Memory 8.4 kB

LFE2-6SE-5T144C 0.5 mm 引脚配置指南

LFE2-6SE-5T144C(0.5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LFE2-6SE-5T144C 的 0.5 mm 封装引脚图

暂无详细引脚数据: LFE2-6SE-5T144C.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LFE2-6SE-5T144C 适用于 6 应用s: Industrial Control and Automation, Sensor and Measurement Interfaces, Communication Protocol Bridging, Embedded Audio and Control DSP, Programmable Test and Measurement, Automotive and Robust Embedded Logic.

🏭

Industrial Control and Automation

The LFE2-6SE-5T144C fits compact industrial control modules that coordinate sensors, actuators, interlocks, and machine-state logic. Its 6K LUTs provide substantial programmable logic for sequencing and protocol handling, while 90 I/O support parallel field connections without requiring a larger programmable-logic package. The 1.2 V core supports modern digital implementation, and the -5 speed grade provides additional timing margin when control logic must meet short industrial timing requirements. Engineers should partition real-time functions carefully, validate I/O standards against the field environment, and retain an external configuration path for maintenance and firmware updates.

🧩

Sensor and Measurement Interfaces

The LFE2-6SE-5T144C is suitable for sensor hubs that collect parallel digital measurements, perform sampling control, and format data for an upstream processor. Its 90 user I/O offer practical connectivity for multi-channel acquisition, trigger, and control signals, while 6K LUTs support channel multiplexing, filtering, calibration state, and data packing. The S-Series DSP capability can assist arithmetic pipelines where multiply-accumulate processing is useful. Because analog front-end accuracy is not determined by the FPGA, engineers should keep sensitive analog paths separate, use the ECP2 I/O standards appropriately, and verify timing closure for the selected sampling architecture.

🌐

Communication Protocol Bridging

The LFE2-6SE-5T144C can bridge parallel and serial interfaces in embedded communication equipment by combining bus logic, buffering, framing, and control in one ECP2 device. Its 90 I/O allow several legacy parallel interfaces to coexist, while 6K LUTs support state machines and protocol conversion. The S-Series DSP resources may also assist filtering or line-rate arithmetic in specialized endpoints. Implementation should use the manufacturer's supported I/O and clocking resources, constrain timing-critical paths, and verify protocol timing with representative traffic rather than relying only on functional simulation.

🎧

Embedded Audio and Control DSP

The LFE2-6SE-5T144C is appropriate for audio-adjacent control and signal-processing functions that require deterministic arithmetic alongside extensive digital I/O. Its S-Series DSP capability supports multiplier-oriented operations, while 6K LUTs accommodate filters, control state, and sample-rate conversion logic. The 90-I/O count is useful for parallel codecs, control lines, clocks, and status signals. Engineers should assess whether the DSP resources meet the required sample rate and channel count, use vendor synthesis guidance for multiplier mapping, and add external memory or a companion codec when the internal resources cannot sustain the target workload.

🔧

Programmable Test and Measurement

The LFE2-6SE-5T144C can implement a configurable measurement, pattern-generation, or interface-control front end in compact instrumentation. Its 6K LUTs can host acquisition control, sequencing, and data preparation, while 90 I/O provide connections to sensors, test points, and peripheral converters. The -5 speed grade can help meet timing margins in pipelined acquisition paths, although system bandwidth still depends on the selected I/O, memory interface, and clock architecture. For accurate instruments, isolate analog paths from switching logic, define deterministic acquisition timing, and validate stimulus patterns across temperature and voltage corners.

🚗

Automotive and Robust Embedded Logic

The LFE2-6SE-5T144C can be evaluated for embedded logic in systems requiring a moderate number of parallel I/O and programmable control functions. The ECP2 resource set supports state machines, diagnostics, communication handling, and local signal processing, while the 144-LQFP package simplifies assembly for moderate pin counts. Automotive use must be based on the exact device's qualification and temperature documentation rather than inferred from the FPGA architecture. If the required environment exceeds the standard grade, evaluate the N or I ordering option, confirm AEC-Q100 status for the exact MPN, and complete environmental, EMC, and functional-safety analysis separately.

推荐产品汇总

LFE2-6SE-6T144C Lattice Semiconductor 用于: Industrial Control and Automation, Sensor and Measurement Interfaces, Communication Protocol Bridging, Embedded Audio and Control DSP, Programmable Test and Measurement LFE2-6SE-5TN144C Same-speed extended-temperature ECP2 option 用于: Industrial Control and Automation, Sensor and Measurement Interfaces, Automotive and Robust Embedded Logic LFE2-6SE-6TN144C Same-family interface alternative 用于: Communication Protocol Bridging LFE2-6SE-6T144I Lattice Semiconductor 用于: Embedded Audio and Control DSP LFE2-6SE-7T144C Lattice Semiconductor 用于: Programmable Test and Measurement LFE2-6SE-6TN144I Temperature-grade same-package alternative 用于: Automotive and Robust Embedded Logic
What are the key specifications of LFE2-6SE-5T144C that engineers should know?
The LFE2-6SE-5T144C is a 6,000-cell ECP2 FPGA with 6K LUTs, 90 I/O, S-Series DSP capability, a 1.2 V operating voltage, and a 144-LQFP package. According to the LatticeECP2/M Family Data Sheet and the manufacturer product listing, its -5 suffix identifies the speed grade. These figures place it in the compact ECP2 family and make it appropriate for parallel control, interface, embedded DSP, and sensor-processing systems requiring more I/O than a small FPGA.
What is the operating voltage of LFE2-6SE-5T144C?
The LFE2-6SE-5T144C operates at a 1.2 V core voltage. This value is identified in the Lattice product listing and distinguishes the device from the older ECP generation. The 1.2 V core should be paired with a suitable supply network and local bypass capacitors placed close to the package supply pins. Final voltage tolerances and sequencing requirements must be confirmed against the LatticeECP2/M Family Data Sheet before PCB release.
How many LUTs and I/O does LFE2-6SE-5T144C have?
The LFE2-6SE-5T144C contains 6K LUTs and provides 90 user I/O in its 144-LQFP configuration. The 6K LUT count describes its main programmable logic capacity, while the 90 I/O support parallel buses, control signals, and external interfaces. Lattice lists the device as an ECP2 FPGA with 6,000 logic cells. Designers should map their complete pin plan in the LatticeECP2/M Family Data Sheet because configuration, dedicated pins, and package-specific assignments can affect usable I/O.
Where can I download the LFE2-6SE-5T144C datasheet PDF?
The LFE2-6SE-5T144C documentation is titled the LatticeECP2/M Family Data Sheet. A direct document listing for this exact MPN is available through the linked datasheet source on this page, while the manufacturer-specific product information should also be consulted for ordering and lifecycle details. Use the data sheet to verify the 144-LQFP pin table, power architecture, configuration pins, clock resources, I/O standards, and package dimensions before releasing a board design.
Where can I find the LFE2-6SE-5T144C pinout?
The LFE2-6SE-5T144C pinout is defined by the 144-LQFP pin table in the LatticeECP2/M Family Data Sheet. The package drawing and package-specific pin assignments must be read together because power, configuration, clock, and user-I/O functions occupy designated positions. This page does not reproduce individual pin names without a complete pin-level source. Use the manufacturer data sheet for final schematic entry and ensure the PCB library follows the exact package orientation and pin-1 marking.
Is LFE2-6SE-5T144C suitable for DSP and signal-processing applications?
Yes, the LFE2-6SE-5T144C includes S-Series DSP capability, as stated in the Lattice product listing. Its 6K LUTs and 90 I/O also make it useful for DSP systems that need parallel data movement alongside arithmetic logic. Actual processing throughput depends on the selected clock, resource mapping, memory architecture, and design style. Use the ECP2 synthesis and implementation tools to evaluate pipeline depth, multiplier usage, timing closure, and I/O bandwidth for the target algorithm.
LFE2-6SE-5T144C vs LFE2-6SE-6T144C - which is better?
The LFE2-6SE-5T144C and LFE2-6SE-6T144C belong to the same ECP2 configuration family, but their listed speed grades are -5 and -6, respectively. Choose the -5 device when its higher speed grade is required or beneficial; choose the -6 device when the lower speed grade meets the design and cost target. Both use the 144-LQFP package and 6K LUT/90-I/O resource configuration according to the comparison listing, but timing margins should be rechecked after synthesis.
When should I choose LFE2-6SE-5T144C over LFE2-6SE-5TN144C?
Choose the LFE2-6SE-5T144C when a commercial-temperature 144-LQFP ECP2 device with a -5 speed grade matches the product specification and the PCB requires that exact ordering code. Choose LFE2-6SE-5TN144C when the extended-temperature ordering option is required. The N suffix denotes a temperature-grade distinction in the ECP2 ordering system, so it should not be selected solely for electrical compatibility. Confirm the required temperature range and procurement requirements before substitution.
What is the best drop-in replacement for LFE2-6SE-5T144C?
The closest same-package replacement is LFE2-6SE-6T144C because it retains the ECP2 6K LUT, 90-I/O, 144-LQFP, 1.2 V configuration while changing the speed grade from -5 to -6. Other ECP2 ordering options include temperature and speed changes, so they are not automatically equivalent. Treat the -6 part as a design-degradation candidate rather than an unconditional replacement, and require post-synthesis timing analysis plus a full package and temperature review.
Can LFE2-6SE-6T144C replace LFE2-6SE-5T144C?
The LFE2-6SE-6T144C can serve as a same-footprint migration candidate because both are listed as 6K LUT, 90-I/O, 1.2 V ECP2 devices in the 144-LQFP package. Its -6 speed grade is lower than the -5 grade of the target, so timing closure may become the deciding constraint. Before replacement, compare the exact pinout, temperature grade, configuration interface, power behavior, and critical-path timing in the synthesis report.
What can replace LFE2-6SE-5T144C in an existing design?
The LFE2-6SE-5T144C can initially be evaluated against the same-package LFE2-6SE-6T144C and the temperature-grade LFE2-6SE-5TN144C. The -6 version changes speed from -5 to -6, while the N version changes the temperature class rather than the speed class. A valid replacement must also match voltage, package, pinout, configuration behavior, and supported I/O standards. Complete timing and hardware validation rather than relying on suffix similarity alone.
Is LFE2-6SE-5T144C the same as LFE2-6SE-5TN144C?
No, the LFE2-6SE-5T144C and LFE2-6SE-5TN144C differ in temperature-grade ordering. Their listed FPGA resources, 1.2 V operating voltage, 90 I/O, and 144-LQFP package are the same, while the N suffix identifies the extended-temperature option. They can share a PCB footprint, but they are not the same ordering specification. Choose the standard-temperature part for commercial conditions and the N-suffix part only when the system requires its wider temperature range.
What is the best Lattice Semiconductor equivalent for LFE2-6SE-5T144C?
The best Lattice Semiconductor equivalent is selected by the required speed and temperature grades, not by a generic equivalence claim. LFE2-6SE-6T144C preserves the listed 144-LQFP, 6K LUT, 90-I/O, and 1.2 V configuration but lowers the speed grade from -5 to -6. LFE2-6SE-5TN144C preserves the -5 speed grade while changing the temperature class. Review the manufacturer ordering guide and verify timing and environmental requirements before selecting either option.
Where to buy LFE2-6SE-5T144C online?
Use the Request a Quote form on this page to request LFE2-6SE-5T144C availability, lot conditions, and a quotation for the exact 144-LQFP ordering code. The form avoids ambiguity between speed, temperature, and packaging suffixes. Before requesting stock, confirm the required grade, package, production quantity, date codes, and inspection requirements. Purchasing decisions should also include an authorized-channel assessment and counterfeit-risk controls for programmable semiconductors.
What is the price of LFE2-6SE-5T144C?
Use the Request a Quote form on this page for the current LFE2-6SE-5T144C quotation. Programmable FPGA pricing can vary with quantity, grade, lifecycle status, date code, and inventory depth, so a static quote may not match production requirements. State the required order quantity and package suffix in the request. The same form can be used to confirm lead time, factory allocation, traceability, and inspection requirements alongside the commercial terms.
What is the lead time for LFE2-6SE-5T144C?
Submit the exact LFE2-6SE-5T144C quantity and required date code through the Request a Quote form on this page for current lead-time and allocation information. Lead time can change with market demand, production planning, package configuration, and inventory status, so it should not be inferred from a distributor listing. Include your target date and forecast quantity to allow the supply channel to distinguish standard stock from scheduled or factory-supported procurement.
Is LFE2-6SE-5T144C in stock?
Current stock for the LFE2-6SE-5T144C should be requested through the Request a Quote form on this page. Confirm the exact suffix, package, quantity, and acceptable date codes when asking for inventory. For production use, request traceability information and evidence that the material is new and genuine. Distributor search-result wording is not a substitute for a confirmed allocation against your required quantity and delivery schedule.
Does LFE2-6SE-5T144C support RoHS and lead-free manufacturing?
The RoHS and lead-free status of the LFE2-6SE-5T144C should be confirmed from the current Lattice product documentation and declaration for the exact ordering code. The component listings identify the package as 144-LQFP and show lead-free wording for comparable ECP2 entries, but that alone is not sufficient to assign a formal compliance status. Obtain the applicable manufacturer declaration or material-compliance report before treating the device as compliant in a controlled production process.

工程参考数据: LFE2-6SE-5T144C ——对比、设计指导和合规信息。

选型指南

Choose the LFE2-6SE-5T144C when the design specifically requires the standard-temperature ECP2 option with a -5 speed grade, 6K LUTs, 90 I/O, S-Series DSP capability, and a 144-LQFP footprint. The LFE2-6SE-6T144C is the closest same-package migration candidate when the lower -6 speed grade still satisfies timing. Use LFE2-6SE-5TN144C when the same -5 speed grade is needed but the environmental requirement calls for the N temperature option. LFE2-6SE-6T144I and LFE2-6SE-6TN144I introduce both speed and temperature-ordering changes, while the -7 options are lower-speed alternatives. For every substitution, compare the exact package, voltage, configuration interface, I/O standards, resource allocation, timing report, and required temperature range. A shared package and similar MPN structure do not eliminate the need for design-level validation.

与替代料对比

参数 本产品 LFE2-6SE-6T144C LFE2-6SE-6TN144C LFE2-6SE-6T144I LFE2-6SE-6TN144I LFE2-6SE-7T144C LFE2-6SE-7TN144C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 144-LQFP 144-LQFP - same 144-LQFP - same 144-LQFP - same 144-LQFP - same 144-LQFP - same 144-LQFP - same
Device Family ECP2 FPGA ECP2 FPGA ECP2 FPGA ECP2 FPGA ECP2 FPGA ECP2 FPGA ECP2 FPGA
LUT Count 6K LUTs 6K LUTs 6K LUTs 6K LUTs 6K LUTs 6K LUTs 6K LUTs
User I/O Count 90 I/O 90 I/O 90 I/O 90 I/O 90 I/O 90 I/O 90 I/O
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Speed Grade -5 -6 -6 -6 -6 -7 -7
DSP Capability S-Series DSP S-Series DSP S-Series DSP S-Series DSP S-Series DSP S-Series DSP S-Series DSP
Special Feature Standard temperature ordering Standard temperature ordering N temperature-grade ordering I temperature-grade ordering N and I temperature-grade ordering Standard temperature ordering N temperature-grade ordering

关键差异点

  • Higher listed speed grade than the -6 alternatives (对比 LFE2-6SE-6T144C)
  • Retains standard-temperature ordering at the -5 speed grade (对比 LFE2-6SE-6T144I)
  • Matches the resource density of the same-package ECP2 alternatives (对比 LFE2-6SE-6TN144I)
  • Provides more timing margin than the -7 alternative (对比 LFE2-6SE-7T144C)

设计说明

The ECP2 core operates from 1.2 V, so board design must provide a low-noise supply with adequate decoupling at the package. Follow the LatticeECP2/M Family Data Sheet for the required core and auxiliary supply values, permissible tolerances, ramp limits, and sequencing. Place the specified bulk and high-frequency capacitors close to their associated pins, minimize loop area, and keep return-current paths continuous. Validate startup and shutdown behavior in hardware because a usable steady-state voltage alone does not confirm correct configuration sequencing.

Use the manufacturer 144-LQFP land pattern and verify pin-1 orientation against the component drawing before releasing PCB artwork. The 144-pin package has a 0.5 mm pitch, making solder mask, pad-to-pad, and assembly-process checks important. Maintain the package's recommended courtyard, route configuration and clock signals away from noisy switching nodes, and provide accessible test points for configuration, reset, and key clock signals. A footprint audit against the exact LFE2-6SE-5T144C drawing is mandatory.

Clock quality directly affects ECP2 timing margin and DSP performance. Route clocks from the selected clock source to the appropriate dedicated clock pins using short, symmetric paths, provide uninterrupted reference planes, and keep switching outputs and high-current paths away from clock nets. Apply device-specific input thresholds and I/O standards during constraint definition. Because the -5 speed grade provides less timing slack than faster grade options, complete post-layout static timing analysis and test the design across expected voltage and temperature corners.

Do not treat an ECP2 suffix change as automatically interchangeable. The alternatives in this comparison alter speed grade, temperature grade, or both, and a faster or slower grade can change timing closure rather than only the ordering label. Before substitution, confirm the exact package drawing, pinout, core voltage, configuration method, supported I/O standards, and environmental requirements. Re-run synthesis, place-and-route, and timing analysis for the selected MPN and perform hardware validation before releasing a new production order.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The exact LFE2-6SE-5T144C product listing identifies a lead-free 144-LQFP package, but formal RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 declarations for the exact MPN are not stated. The standard-temperature ordering is not represented as AEC-Q100 qualified; confirm qualification using the exact automotive-grade ordering code and current manufacturer documentation.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LFE2-6SE-5T144C datasheet LFE2-6SE-5T144C pinout LFE2-6SE-5T144C datasheet pdf LFE2-6SE-5T144C specifications LFE2-6SE-5T144C equivalent LFE2-6SE-5T144C replacement LFE2-6SE-5T144C footprint LFE2-6SE-5T144C price LFE2-6SE-5T144C stock Lattice Semiconductor LFE2-6SE-5T144C LFE2-6SE-5T144C vs LFE2-6SE-6T144C LFE2-6SE-5T144C 144-LQFP pinout LFE2-6SE-5T144C industrial control

相关元器件 & 术语

Lattice Semiconductor LFE2-6SE-5T144C LFE2-6SE-6T144C LFE2-6SE-6TN144C LFE2-6SE-6T144I LFE2-6SE-6TN144I LFE2-6SE-7T144C LFE2-6SE-7TN144C ECP2 FPGA field-programmable gate array programmable logic device semiconductor LUT look-up table S-Series DSP 1.2 V core 90 I/O 144-LQFP LQFP package family surface-mount package industrial automation sensor interface communication protocol bridge embedded DSP test and measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情