LFE2-6SE-6T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
料号: LFE2-6SE-6T144C ✓ 量产中LFE2-6SE-6T144C 概述
An FPGA is a user-programmable semiconductor in which interconnect and logic are configured after manufacture. The ECP2 family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, embedded block RAM, programmable I/O, and dedicated high-speed serial channels. This makes the device useful where designers need parallel processing, flexible interfaces, protocol adaptation, or deterministic hardware logic in a compact surface-mount package.
The LFE2-6SE-6T144C provides 6,000 FPGA cells, 56,320 flip-flops, and 90 user I/O according to its manufacturer product listing. Its -6 performance designation identifies the device speed option, while the 144-pin package exposes substantially more I/O than smaller FPGA packages. Integrated serial capability supports applications requiring multiple high-speed links rather than only parallel logic and general-purpose I/O.
The ECP2 architecture is implemented in 90 nm process technology and uses a 1.2 V core voltage. This combination places the device in the low-voltage programmable-logic class, where system-level power depends on core voltage, I/O standards, switching activity, configuration method, and utilization. The 144-pin TQFP/LQFP package also provides a large perimeter for routing general-purpose I/O and reduces the need for fine-pitch fan-out in prototype and medium-density designs.
Typical uses include serial-interface bridges, industrial control and instrumentation, test and measurement equipment, embedded DSP pipelines, data acquisition front ends, and communications equipment requiring multiple SerDes channels. The device can consolidate protocol conversion, clock-domain interfacing, packet framing, and parallel control logic into one programmable component while preserving the flexibility of FPGA-based updates.
PCB design should preserve adequate decoupling at every supply pin, route configuration and serial interfaces according to the manufacturer pinout, and validate high-speed channel routing with controlled-impedance geometry. Designers should also account for the -6 speed grade in timing constraints and confirm the exact I/O voltage domains before assigning pins to external standards.
This page combines the exact LFE2-6SE-6T144C specifications, family-level replacement guidance, package information, application engineering notes, and a parameter comparison to support faster design evaluation and sourcing decisions.
直接替换替代料: LFE2-6SE-6T144C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LFE2-6SE-6T144C (相同外形与封装尺寸) ——差异在于 DSP Capability, Package, Speed Grade, Device Type, Process Technology.
LFE2-6SE-6TN144C
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-6E-7TN144C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LFE2-6E-6T144C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LFE2-6E-6TN144C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LFE2-6SE-5T144C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LFE2-6SE-6T144C 最大额定值与电气特性
| Device Type | ECP2 field-programmable gate array (FPGA) |
| FPGA Logic Cells | 6,000 cells |
| System Registers | 56,320 registers |
| User I/O Count | 90 I/O |
| Logic Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 |
| 封装 | 144-pin TQFP/LQFP |
| 安装类型 | Surface mount |
| Serial Interface Support | S-Series SerDes |
| DSP Capability | DSP-oriented programmable logic |
| FPGA Family | LatticeECP2 |
| RoHS 状态 | unknown |
| REACH Status | unknown |
LFE2-6SE-6T144C 144-pin tqfp/lqfp 引脚配置指南
LFE2-6SE-6T144C(144-pin tqfp/lqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LFE2-6SE-6T144C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LFE2-6SE-6T144C 适用于 6 应用s: Industrial Control and Automation, High-Speed Serial Interface Bridge, DSP Signal-Processing Pipeline, Test and Measurement Instrumentation, Data Acquisition Front End, Embedded Communications Gateway.
Industrial Control and Automation
The LFE2-6SE-6T144C fits programmable industrial controllers that need 90 user I/O for sensors, discrete actuators, counters, and machine-status signals. Its 6,000 logic cells can implement motion sequencing, state machines, interlocks, and communication framing without a separate microcontroller for every fixed function. The 144-pin package provides generous I/O access for moderate control systems, while the -6 speed grade supports timing-sensitive logic. Use the exact ECP2 pin assignment and I/O standards from the manufacturer documentation when assigning field wiring and level-shifters.
推荐
High-Speed Serial Interface Bridge
The ECP2 S-Series SerDes resources in the LFE2-6SE-6T144C support parallel-to-serial conversion, clock recovery, packet framing, and protocol bridging in communications equipment. The 6,000-cell device provides additional logic capacity alongside the serial channels, allowing status, error handling, and flow control to remain integrated. The -6 speed grade defines the timing target for these functions. Layout should use controlled-impedance routing and short serial escapes, while power and ground distribution should follow the manufacturer reference layout.
推荐
DSP Signal-Processing Pipeline
The LFE2-6SE-6T144C is appropriate for configurable DSP pipelines such as digital filtering, correlation, waveform conversion, sampling-rate transformation, and real-time data conditioning. Its 6,000 logic cells allow parallel datapaths to be combined with control and interface logic in one programmable device. The 1.2 V core supports a compact low-voltage implementation, and 90 I/O provide access to sampled data and control signals. Final timing closure must use the -6 device speed grade and the selected I/O timing constraints.
推荐
Test and Measurement Instrumentation
The LFE2-6SE-6T144C can serve as the programmable control and signal-processing core in test equipment, combining sequencers, timing logic, pattern generation, and serial instrumentation. Its 90 user I/O and S-Series SerDes capability allow external converters and communication links to be integrated under one programmable architecture. The 6,000-cell capacity is suitable for moderate logic density rather than very large parallel-processing arrays. Engineers should assign pins from the package-specific tables and validate high-speed edge rates, terminations, and clocking topology.
推荐
Data Acquisition Front End
The LFE2-6SE-6T144C works well as the digital control layer between sensors or converters and a host processor. Programmable logic can perform channel multiplexing, offset and gain correction, decimation, timestamp handling, and data packing while the 90 user I/O expose converter and sensor-control signals. The -6 speed grade supports deterministic pipeline operation, and the ECP2 architecture permits design changes without changing the PCB. The acquisition clock and data interface must be constrained for the selected operating mode and package assignments.
推荐
Embedded Communications Gateway
The LFE2-6SE-6T144C is suitable for compact gateway logic that terminates serial links, translates protocols, buffers packets, and coordinates host-processor communications. Multiple S-Series SerDes channels and 90 user I/O allow a single ECP2 implementation to consolidate several board-level interfaces, while 6,000 logic cells provide room for framing and control functions. Choose the -6 grade when timing margins are important, and validate configuration startup, clock distribution, and channel assignments against the ECP2 design documentation.
推荐
推荐产品汇总
工程参考数据: LFE2-6SE-6T144C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LFE2-6SE-6TN144C | LFE2-6E-7TN144C | LFE2-6E-6T144C | LFE2-6E-6TN144C | LFE2-6SE-5T144C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 144-pin TQFP/LQFP | 144-pin TQFP/LQFP - same | 144-pin TQFP/LQFP - same | 144-pin TQFP/LQFP - same | 144-pin TQFP/LQFP - same | 144-pin TQFP/LQFP - same |
| Speed Grade | -6 | -6 | -7, one speed step faster | -6 | -6 | -5, one speed step slower |
| FPGA Family | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 |
关键差异点
- Higher I/O density in a 144-pin package (对比 LFE2-6SE-6TN144C)
- Faster timing option within the same ECP2 package class (对比 LFE2-6SE-5T144C)
- Documented exact-device configuration (对比 LFE2-6E-6T144C)
- S-Series SerDes support with substantial general-purpose I/O (对比 LFE2-6E-6TN144C)
设计说明
Follow the manufacturer pin and power-planning tables when assigning the 144-pin footprint. Place the required core and I/O decoupling capacitors close to their associated supply pins, provide a low-impedance ground reference, and keep the configuration interface away from high-speed SerDes routing. Because a TQFP has closely spaced leads on all four sides, inspect the solder mask, pad geometry, and paste stencil after exact package dimensions are confirmed.
Route differential or high-speed serial signals as controlled-impedance interconnects using the manufacturer's reference stack-up and termination guidance. Keep clock and data paths short, avoid unnecessary vias, and provide a continuous reference plane. Validate timing and signal integrity at the -6 speed grade rather than assuming another ECP2 variant has equivalent edge-rate behavior.
Do not treat every 144-pin ECP2 device as a drop-in substitute merely because its logic-cell count and package match. Confirm the exact ordering suffix, speed grade, temperature class, I/O assignments, configuration pins, and package drawing. After programming, verify that unused I/O are configured according to the manufacturer's recommendations and that all required power rails reach their specified operating levels before interpreting logic or communication failures.
Calculate power from the selected core voltage, I/O voltage domains, estimated utilization, switching activity, and configuration method rather than from the 1.2 V core rating alone. Estimated: core power equals 1.2 V multiplied by the average core-current draw, while I/O power equals the sum of each enabled bank voltage multiplied by its measured or conservatively estimated load current. Check worst-case I/O states as well as typical FPGA activity.
合规信息
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the retrieved device records. AEC-Q100 qualification is not indicated for this commercial ECP2 ordering code.