Texas Instruments

LM224KAD - 4-Channel 32V Op Amp | Texas Instruments

料号: LM224KAD ✓ 量产中
3 V to 32 V Vdss 14-pin SOIC Package
最小起订量: 1 |

LM224KAD 概述

Texas Instruments LM224KAD is a four-channel general-purpose operational amplifier designed for single-supply or dual-supply operation. It supports supply voltages from 3 V to 32 V, corresponding to ±16 V under symmetric dual-supply operation, and operates with a typical gain-bandwidth product of 1.2 MHz. The device is packaged in a 14-pin SOIC and is identified as the industrial-grade, standard quad amplifier option with improved electrostatic-discharge protection rated to 2 kV.

An operational amplifier is an analog building block that uses high-gain differential amplification to compare an inverting input with a non-inverting input. When negative feedback is applied, the amplifier adjusts its output to reduce the difference between those inputs. The LM224 family belongs to the broader operational amplifier, analog signal-conditioning, and semiconductor hierarchies, providing a practical way to buffer sensors, amplify small signals, and implement general analog control functions.

Four independent amplifier channels are integrated into one package, reducing board area in designs requiring multiple analog functions. The 1.2 MHz gain-bandwidth product supports common low-frequency signal-conditioning tasks, while the wide 3 V to 32 V operating range accommodates single 5 V, 12 V, 24 V, and ±15 V systems. A 14-pin SOIC provides a familiar surface-mount footprint for conventional PCB assembly and prototype rework. The product listing identifies 2 kV ESD protection, improving handling tolerance in applications exposed to electrostatic discharge.

The LM224 architecture supports operation from a single positive supply or split supplies, allowing the same amplifier family to serve industrial control, instrumentation, and test-equipment designs. Its low-power general-purpose positioning makes it especially useful when four amplifiers are required but precision, rail-to-rail input/output, or very high bandwidth is not required. Input and output limits must still be respected, and the unused amplifier channel should be configured according to the manufacturer’s recommended practice rather than left floating.

Typical uses include 24 V industrial sensor interfaces, temperature-transducer amplification, low-frequency active filters, actuator-signal conditioning, and instrumentation buffers. The wide supply range is particularly useful where the same board must operate across multiple nominal rails. In applications using ±15 V supplies, the device operates near the stated ±16 V capability, while designers should preserve margin for load regulation and transient behavior.

When laying out a design, place input and feedback components close to the corresponding amplifier pins to minimize parasitic feedback and noise pickup. Decoupling capacitors should connect to a low-impedance ground plane, and unused channels need stable biasing. Input common-mode and output swing limits must be checked against the actual supply voltages because the LM224 is not a rail-to-rail amplifier.

This page combines the exact LM224KAD order information, verified product attributes, family-level alternatives, and practical circuit-placement guidance. It also explains where the LM224 fits among general-purpose quad operational amplifiers, helping engineers distinguish it from higher-precision, low-noise, rail-to-rail, or wider-bandwidth amplifier families before making a drop-in sourcing decision.

直接替换替代料: LM224KAD ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM224KAD (相同外形与封装尺寸) ——差异在于 Package, Product Type, Mounting Type, Supply Configuration, Amplifier Type.

Texas Instruments
Product Type: Quad general-purpose operational amplifier
Mounting Type: Surface-mount SOIC
Supply Configuration: Single supply or split supply
对比 LM224KAD →
Texas Instruments
Product Type: Quad general-purpose operational amplifier
Mounting Type: Surface-mount SOIC
Supply Configuration: Single supply or split supply
对比 LM224KAD →
Texas Instruments
Product Type: Quadruple operational amplifier
Supply Configuration: Single or split supply
对比 LM224KAD →
Texas Instruments
Package: 14-SOIC
Supply Configuration: Single or split supply
对比 LM224KAD →
Texas Instruments
Package: 14-pin SOIC (D)
Supply Configuration: Single supply or split supply
Amplifier Type: Quad general-purpose operational amplifier
对比 LM224KAD →
onsemi
Package: 14-SOP
Product Type: Quad operational amplifier
对比 LM224KAD →

LM224DG4

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quadruple operational amplifier · 4 circuits · 3 V to 32 V · 14-pin SOIC · Surface mount · Standard general-purpose amplifier · 4 · Single or split supply

联系询价

查看数据手册 →

LM224KDR

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 circuits · 30 V · 1.2 MHz · 2 kV · -25°C to +85°C · 14-pin SOIC (D) · 0.154 in (3.90 mm)

联系询价

查看数据手册 →

LM224AD

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 circuits · Four independent high-gain, frequency-compensated amplifiers · 1.2 MHz · 0.5 V/µs · 3 mV · 30 V · ±1.5 V to ±16 V

联系询价

查看数据手册 →

LM224ADR

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 circuits · Four independent high-gain, frequency-compensated amplifiers · 1.2 MHz · 0.5 V/µs · 3 mV · 30 V · ±1.5 V to ±16 V

联系询价

查看数据手册 →

LM224KAD 最大额定值与电气特性

Amplifier Type General-purpose operational amplifier
Number of Channels 4 channels
Single-Supply Voltage Range 3 V to 32 V
Dual-Supply Voltage Range ±16 V
Typical Gain-Bandwidth Product 1.2 MHz
ESD Protection 2 kV
封装 14-pin SOIC
引脚数量 14 pins
安装类型 Surface mount
Shipping Package Tube
Product Class Standard general-purpose amplifier
Temperature Grade Industrial grade
Input Type Differential input

LM224KAD tube 引脚配置指南

LM224KAD(tube 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM224KAD 的 tube 封装引脚图

暂无详细引脚数据: LM224KAD.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM224KAD 适用于 6 应用s: Industrial Sensor Signal Conditioning, Temperature Transducer Amplification, Active Audio and Communications Filters, Control-System Analog Outputs, Portable Test and Measurement Equipment, Power-Supply and Battery Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM224KAD fits industrial sensor interfaces that operate from a 24 V control rail and require several low-frequency analog channels on one board. Its four independent amplifier sections can buffer thermocouple, resistive, pressure, or level-sensor signals before conversion, while the 3 V to 32 V single-supply range provides headroom above a nominal 24 V rail. The 1.2 MHz gain-bandwidth product is appropriate for signals well below the amplifier’s useful closed-loop bandwidth. Because LM224KAD is an industrial-grade ordering option, engineers should still verify its exact temperature limits, input common-mode range, offset voltage, and output-swing limits for the installed enclosure.

💊

Temperature Transducer Amplification

The LM224KAD can amplify the small differential output of resistive temperature sensors when the system uses one supply rail and requires several channels. Each amplifier can be configured as a non-inverting or inverting stage with external resistors, and the 32 V maximum supply capability accommodates industrial excitation and signal-conditioning rails. Its 1.2 MHz typical gain-bandwidth product is substantially faster than many low-frequency temperature-measurement systems require. Designers should calculate resistor noise and offset contributions for the desired gain, then confirm that input and output voltages remain inside the device's specified common-mode and swing limits.

🎧

Active Audio and Communications Filters

LM224KAD is suitable for low-frequency active filtering in audio, communications, and instrumentation systems where four channels are needed in a common package. Its 1.2 MHz typical gain-bandwidth product supports stages whose closed-loop bandwidth remains well below the unity-gain limit, while the dual-supply capability reaches ±16 V for bipolar signal paths. The amplifier is a general-purpose choice rather than a dedicated low-noise audio part, so noise, distortion, slew rate, and input-voltage-range requirements should be checked before using it in a high-fidelity chain. External resistors and capacitors determine the filter response and should be selected against the complete gain-bandwidth behavior.

🔧

Control-System Analog Outputs

The LM224KAD can condition low-level control signals in industrial panels, actuator interfaces, and analog I/O modules powered from 12 V or 24 V rails. Four channels reduce the component count when a board requires voltage buffers, error amplifiers, comparators with hysteresis, or simple active drive stages. Its 32 V supply capability leaves useful margin in 24 V systems, while operation down to 3 V permits use in lower-voltage control subsections. Output-current capability and saturation behavior must be checked against the load. For signals that must reach the positive supply rail, include an output-limiting network or select a rail-to-rail amplifier instead.

🖥️

Portable Test and Measurement Equipment

LM224KAD works well in bench instruments and field test equipment that need several general-purpose analog channels for source buffering, differential measurement, and gain stages. The 14-SOIC package is straightforward to assemble and rework, and the wide 3 V to 32 V supply range permits use in both compact battery-derived systems and higher-voltage laboratory interfaces. A 1.2 MHz bandwidth is useful for low- and mid-frequency instrumentation but not for high-speed waveform capture. Designers should verify input bias current, offset voltage, common-mode range, and output drive against the probe, sensor, or test network before finalizing the front end.

⚡

Power-Supply and Battery Monitoring

The four channels in LM224KAD can monitor several low-voltage signals in a power-conversion or battery-management system, including cell voltages, feedback nodes, and current-shunt outputs. The wide supply range allows the amplifier to operate from a supervisory rail while sensing signals within its valid input range, and the quad package consolidates several monitoring paths. Because the LM224 is a general-purpose amplifier, its input common-mode range and output swing must be checked carefully when cell voltages approach the positive rail. A suitable design should also account for input bias current and any leakage through high-impedance battery-monitoring nodes.

What is the LM224KAD datasheet?
The LM224KAD datasheet is the manufacturer documentation for a four-channel, general-purpose operational amplifier in a 14-pin SOIC package. The LM224 family operates from 3 V to 32 V, supports ±16 V dual supplies, and has a typical gain-bandwidth product of 1.2 MHz. Texas Instruments describes the family as offering wide-temperature-range operation, while the LM224KAD order listing identifies improved 2 kV ESD protection. Use the official LM224 product page and its linked manufacturer datasheet for the authoritative pin assignments, electrical limits, and ordering information.
Where can I download the LM224KAD datasheet PDF?
The LM224KAD datasheet PDF is accessible through the Texas Instruments LM224 product page at https://www.ti.com/product/LM224. That page provides the official documentation and ordering information for the LM224 family. The LM224KAD is a 14-SOIC, four-amplifier device with a 3 V to 32 V single-supply range, ±16 V dual-supply capability, and 1.2 MHz typical gain-bandwidth product. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks because the exact order codes can differ in temperature, grade, and shipping format.
What are the key specifications of LM224KAD that engineers should know?
The LM224KAD is a four-channel, general-purpose operational amplifier in a 14-pin SOIC package. Its principal operating specifications include a 3 V to 32 V single-supply range, ±16 V dual-supply operation, a typical 1.2 MHz gain-bandwidth product, and 2 kV ESD protection. The integrated quad architecture replaces four separate single amplifiers and is suitable for buffering, sensor amplification, active filtering, and general analog signal conditioning. It is not described as a precision, rail-to-rail, or low-noise device, so those requirements should be checked against other amplifier families.
What is the LM224KAD pinout?
The LM224KAD uses a 14-pin SOIC pinout containing four complete operational amplifiers. Its four channels are numbered as independent amplifier sections, with each section using inverting, non-inverting, output, and supply connections. Because the exact physical pin numbers and channel assignments must match the selected ordering code, use the pin-description table in the Texas Instruments LM224 datasheet before routing the PCB. The verified package identity is 14-pin SOIC; the public listing itself does not reproduce a complete numbered pin table.
Where can I buy LM224KAD online?
Use the Request a Quote form on this page to ask for LM224KAD availability, current lead time, and a quotation for the exact 14-SOIC order code. LM224KAD is listed as an in-stock standard general-purpose quad amplifier by a distributor and is also presented on the Texas Instruments product page. Quote confirmation should include the manufacturer part number, tube packaging, quantity, and delivery requirements so that the correct industrial-grade configuration is allocated.
What is the price of LM224KAD?
Current LM224KAD pricing is available through the Request a Quote form on this page. The structured pricing evidence for this exact manufacturer part number contains no explicit quantity-break prices, so the page does not reproduce a static amount that could become stale. A quotation can confirm the unit price at quantities such as 1, 10, 100, 500, or 1000 units, along with any volume treatment and expected shipping terms.
What is the lead time for LM224KAD?
The current lead time for LM224KAD should be confirmed through the Request a Quote form on this page. A distributor result identifies the exact part as in stock, but no dated commitment or production quantity is shown, so a firm delivery date should not be inferred from that listing. Include the required quantity, tube-packaging preference, destination, and target date in the request to obtain a procurement-ready lead-time confirmation.
Is LM224KAD in stock?
LM224KAD is identified as in stock by one distributor listing and is also offered through the Texas Instruments LM224 product family. Stock levels can change rapidly, however, so use the Request a Quote form on this page for a current allocation and expected ship date. When requesting the quote, identify LM224KAD exactly and confirm the 14-SOIC tube package to avoid substituting a different grade, temperature option, or shipping code.
How does LM224KAD compare with LM224DG4?
LM224KAD and LM224DG4 are both members of the Texas Instruments LM224 family and are described as pin- and package-consistent replacements in the cross-reference comparison. Both provide four general-purpose amplifier channels in a 14-SOIC package, with a 3 V to 32 V single-supply range, ±16 V dual-supply capability, and approximately 1.2 MHz bandwidth. The difference is in the ordering code rather than the core four-channel amplifier function. Confirm grade, temperature, qualification, and shipping-format requirements before approving a substitution.
What is the difference between LM224KAD and LM224KDR?
LM224KAD and LM224KDR identify closely related LM224 configurations, and the cross-reference comparison associates them with the same 14-SOIC quad general-purpose amplifier family. Both support 3 V to 32 V operation and have a typical gain-bandwidth product of 1.2 MHz. The ordering suffix distinguishes the procurement configuration, including shipping format. Because the exact handling marks and current availability may differ, use the Request a Quote form on this page and specify whether the assembly process requires tube or reel packaging.
When should I choose LM224KAD instead of LM224DG4?
Choose LM224KAD when the assembly plan specifically calls for its industrial-grade order configuration and the required LM224KAD qualification, temperature, and packaging combination is documented for the product. Choose LM224DG4 when its documented grade and procurement configuration better match the design. Both devices occupy the same 14-SOIC quad-amplifier position and share the LM224 family's 3 V to 32 V supply capability and approximately 1.2 MHz bandwidth, so the final choice should follow the exact production requirements rather than a generic functional assumption.
Is LM224KAD suitable for industrial 24V control systems?
Yes, LM224KAD is suitable for many 24 V industrial control-signal paths because its single-supply operating range reaches 32 V and its industrial-grade designation aligns with industrial equipment requirements. The four integrated channels can condition several sensor or actuator signals while operating from a common rail. Verify the specific operating-temperature limits, input common-mode range, output swing, load capability, and ESD requirements for the final circuit before approving the device for every industrial channel.
What can replace LM224KAD?
The closest documented replacements are pin- and package-consistent members of the Texas Instruments LM224 family, including LM224DG4, LM224KDR, LM224AD, and LM224ADR. These alternatives retain the 14-SOIC quad general-purpose amplifier format and are suited to the same broad voltage and bandwidth class. A replacement should still be checked for grade, temperature range, qualification, input/output limits, ESD rating, and shipping code. Use the Request a Quote form on this page when the exact alternate configuration is required.
Is LM224KAD the same as an LM324 amplifier?
LM224KAD is not automatically equivalent to an LM324 order code merely because both are quad general-purpose operational amplifiers. The LM224KAD is the industrial-grade LM224 family member, while LM324 variants can have different temperature grades, qualification classes, and order suffixes. Although LM324ADG is shown in a package comparison with LM224KAD, a cross-reference should be treated as a starting point. Confirm supply range, offset voltage, temperature grade, ESD rating, and every orderable parameter before using it as a drop-in replacement.
What is the best Analog Devices equivalent for LM224KAD?
No specific Analog Devices MPN can be responsibly identified as a verified drop-in replacement for LM224KAD from the cross-reference information available. The cross-reference result states that a compatible equivalent and pin-to-pin replacement exist, but it does not identify a manufacturer part number that can be validated against the LM224KAD pinout and electrical limits. Do not approve an unspecified substitute. Instead, request the exact Analog Devices candidate and compare its 14-SOIC pinout, supply range, temperature grade, offset voltage, bandwidth, ESD rating, and load performance.

工程参考数据: LM224KAD ——对比、设计指导和合规信息。

选型指南

Choose LM224KAD when the design needs four general-purpose operational-amplifier channels, a 14-SOIC footprint, operation from a 3 V to 32 V rail, and the industrial-grade order configuration. It is a practical choice for 24 V industrial signal conditioning, temperature interfaces, low-frequency filters, and general control panels where rail-to-rail operation and very low noise are not required. LM224DG4 is appropriate when its documented grade and order configuration match the production plan. LM224KDR offers the same general electrical family but uses a tape-and-reel ordering format. LM224AD and LM224ADR require confirmation of their exact grade, temperature, qualification, and electrical details before substitution. Check input common-mode range, output swing, offset voltage, quiescent current, load drive, and operating-temperature limits for every alternate before releasing a drop-in replacement.

与替代料对比

参数 本产品 LM224DG4 LM224KDR LM224AD LM224ADR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same
Amplifier Configuration Quad general-purpose operational amplifier Quad general-purpose operational amplifier Quad general-purpose operational amplifier Quad general-purpose operational amplifier Quad general-purpose operational amplifier
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels

关键差异点

  • Four general-purpose amplifier channels in one 14-SOIC package (对比 LM224DG4)
  • Wide single- and dual-supply operating capability (对比 LM224AD)
  • Improved 2 kV ESD protection for industrial handling environments (对比 LM224ADR)
  • Practical bandwidth for low-frequency multi-channel analog conditioning (对比 LM224KDR)

设计说明

Place each amplifier's feedback resistors, input resistors, and optional compensation components close to the corresponding LM224KAD pins. Keep output routing away from high-impedance input nodes to reduce parasitic oscillation and sensitivity to board contamination. Connect supply-decoupling capacitors to the ground plane with short, low-inductance paths rather than routing them around the package footprint.

Do not assume that the output can swing to either supply rail. Before using LM224KAD with a 3 V, 5 V, or 12 V supply, check the output-voltage headroom under the intended load and include it in the logic-level design. Also bias every unused amplifier channel according to the manufacturer guidance; leaving an unused input floating can increase noise, disturb supply current, or produce unstable output behavior.

Use a continuous ground plane beneath and around the SOIC, and provide a low-impedance connection from the power and ground pins to the board's supply network. Keep analog input traces short and isolate them from switching-node and high-current return paths. For precision gain stages, use grounded or shielded input structures and avoid routing beneath connectors or digital clock lines that can inject noise through parasitic capacitance.

The LM224KAD can operate from 3 V to 32 V, but that range does not imply identical performance on every rail. Derive the bias currents from the actual single or dual supply, verify input common-mode range and output swing, and leave transient margin below the 32 V maximum. A regulated rail with adequate decoupling is preferable when analog signal integrity is more important than minimum component count.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact LM224KAD order code. The device is listed as industrial grade, which does not by itself establish AEC-Q100 qualification.

相关搜索

lm224 datasheet LM224KAD datasheet pdf LM224KAD datasheet LM224KAD pinout LM224KAD equivalent LM224KAD replacement LM224KAD cross reference LM224KAD vs LM224DG4 LM224KAD vs LM224KDR LM224KAD price LM224KAD stock Texas Instruments LM224KAD LM224KAD 32V operational amplifier LM224 14-SOIC pinout LM224 industrial sensor application circuit

相关元器件 & 术语

Texas Instruments LM224KAD LM224DG4 LM224KDR LM224AD LM224ADR LM324ADG operational amplifier quad operational amplifier general-purpose amplifier analog signal conditioning gain-bandwidth product differential input single-supply operation dual-supply operation ESD protection SOIC 14-SOIC surface-mount package industrial-grade semiconductor sensor interface active filter control system Texas Instruments LM224 product family
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情