Texas Instruments

LM224KDR - 30V, 1.2MHz Quad Op Amp | Texas Instruments

料号: LM224KDR ✓ 量产中
30 V Vdss 14-pin SOIC (D) Package
最小起订量: 1 |

LM224KDR 概述

The Texas Instruments LM224KDR is a four-circuit general-purpose operational amplifier rated for a 30 V maximum supply voltage and 1.2 MHz gain-bandwidth product, packaged in a 14-pin SOIC. Each amplifier provides improved 2 kV electrostatic-discharge protection and operates across a -25°C to +85°C temperature range, making the device suitable for industrial signal-conditioning systems that operate from single or split supplies.

An operational amplifier is an analog building block that amplifies the voltage difference between its non-inverting and inverting inputs. The LM224 contains four independent, high-gain, frequency-compensated amplifiers in one package. This quad arrangement reduces board area and component count in designs requiring multiple amplification channels, such as sensor conditioning, active filtering, instrumentation, and low-frequency control loops.

The principal features include four amplifier circuits, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 kV ESD protection. Frequency compensation is integrated into each amplifier, simplifying implementation of conventional inverting, non-inverting, summing, and comparator-style circuits. The wide supply range supports single-supply operation from batteries and industrial control rails as well as split-supply systems that require a bipolar input or output range.

The LM224 is intended for general-purpose analog designs where a higher-performance precision amplifier is unnecessary. Its bandwidth is suitable for low-frequency instrumentation and feedback-control paths, while the integrated ESD protection improves robustness in electrically noisy equipment. Designers must still observe the limits for input common-mode voltage, output swing, output current, supply voltage, and temperature when designing around the amplifier.

Typical applications include industrial sensor interfaces, process-control signal conditioning, audio preamplification, power-supply feedback networks, active filters, and general instrumentation. Four amplifiers in one package are especially useful when several channels must track similar bandwidth, supply, and environmental requirements. In multi-channel designs, consistent grounding and decoupling remain important for preventing channel-to-channel coupling.

For PCB implementation, place the input, output, supply, and feedback components close to their associated pins. Decouple each supply rail locally, route sensitive input signals away from switching nodes and high-current paths, and avoid long feedback loops. Verify common-mode and output-swing requirements over the full input range before finalizing the signal chain.

This product record combines manufacturer and distributor information with practical guidance for package selection, signal conditioning, PCB layout, and drop-in replacement evaluation. It highlights where the LM224KDR fits, which parameters need verification during substitution, and which design constraints matter most in industrial and general-purpose analog systems.

直接替换替代料: LM224KDR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM224KDR (相同外形与封装尺寸) ——差异在于 Package, Mounting Type, Amplifier Type, Supply Configuration, AEC-Q100 Qualification.

Texas Instruments
Package: 14-SOIC
AEC-Q100 Qualification: unknown
对比 LM224KDR →
Texas Instruments
Package: 14-pin SOIC
Amplifier Type: General-purpose operational amplifier
对比 LM224KDR →
Texas Instruments
Package: 14-pin DIP (0.300 in, 7.62 mm)
Mounting Type: Through-hole
Amplifier Type: General-purpose operational amplifier
对比 LM224KDR →
Texas Instruments
Supply Configuration: Single or dual supply
AEC-Q100 Qualification: Qualified
对比 LM224KDR →

LM224KN

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-SOIC (D)
4 · 4 circuits · General-purpose operational amplifier · 1.2 MHz · 3 V to 32 V · 600 uV typical · 0.8 mA typical · Includes ground

联系询价

查看数据手册 →

LM224DR

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-SOIC (D)
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ 有现货

$0.1641 / 个

查看数据手册 →

LM224DRG3

✅ 直接替换
📦 14-SOIC (D)
Same LM224 family, 14-SOIC footprint, and 30 V class rating; verify grade and temperature limits before replacement

📋 参考替代料(不在目录中)

LM324KDR

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-SOIC (D)
Quad general-purpose operational amplifier · 4 circuits · 30 V · 3 V to 32 V · ±1.5 V to ±16 V · 1.2 MHz · 2 kV · 60 mA

联系询价

查看数据手册 →

LM2902KDR

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-SOIC (D)
4 circuits · General-purpose operational amplifier · 26 V · 3 V to 26 V · 1.2 MHz · 2 kV · -40°C to +125°C · 14-pin SOIC

联系询价

查看数据手册 →

LM224KDR 最大额定值与电气特性

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
ESD Protection 2 kV
工作温度范围 -25°C to +85°C
封装 14-pin SOIC (D)
Package Width 0.154 in (3.90 mm)
安装类型 Surface mount
Supply Configuration Single supply or split supply
Amplifier Architecture High-gain, frequency-compensated
Channel Independence 4 independent amplifier channels
Industrial Temperature Grade Industrial grade

LM224KDR 0.154 in (3.90 mm) 引脚配置指南

LM224KDR(0.154 in (3.90 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM224KDR 的 0.154 in (3.90 mm) 封装引脚图

暂无详细引脚数据: LM224KDR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM224KDR 适用于 6 应用s: Industrial Sensor Signal Conditioning, Active Audio Filters, Power-Supply Feedback Control, Process-Control Loops, General Instrumentation, Data Acquisition and Interface Conditioning.

🏭

Industrial Sensor Signal Conditioning

The LM224KDR suits industrial sensor-conditioning channels because it combines four independent amplifiers, a 30 V maximum supply rating, and a 1.2 MHz gain-bandwidth product in one 14-SOIC package. It can amplify low-level sensor outputs, implement differential-to-single-ended conversion, and build gain stages around transducers whose bandwidth remains well below the amplifier capability. The specified -25°C to +85°C range supports typical industrial environments. Designers should still verify input common-mode range and output swing, place bypass capacitors near the supply pins, and route sensor inputs away from motors and switching power stages to minimize coupled noise.

🎧

Active Audio Filters

The LM224KDR is appropriate for low-frequency active filtering and audio preamplification because its 1.2 MHz gain-bandwidth product provides useful bandwidth for common audio and control-band stages. Four amplifiers can implement cascaded filters, balanced input stages, or gain-sharing sections without requiring four separate packages. Single- or split-supply operation supports both ground-referenced and centered-bias audio architectures. Critical design work includes checking output swing, input common-mode limits, stable feedback-network values, and startup behavior. Short feedback paths and a low-impedance analog ground improve channel consistency and reduce susceptibility to switching noise.

⚡

Power-Supply Feedback Control

The LM224KDR can provide error amplification, voltage comparison, and feedback shaping in industrial power-conversion systems operating from a single supply or a split supply. Its 30 V maximum supply rating permits use in higher-voltage control environments, while four independent channels allow separate error, current, voltage, and auxiliary functions when their operating requirements permit. The 1.2 MHz bandwidth is well suited to many low-frequency control loops but may require compensation review in high-bandwidth converters. Engineers should validate stability, output-current demand, common-mode limits, and power-supply bypass placement before using it inside a compensation loop.

🏭

Process-Control Loops

The LM224KDR fits low-frequency process-control loops requiring several analog signal channels around the same regulated supply. Each of its four high-gain, frequency-compensated amplifiers can form a noninverting amplifier, inverting summer, comparator, or active-filter stage, reducing board area in controllers with multiple analog channels. Its -25°C to +85°C operating specification suits industrial equipment, while the 30 V supply capability accommodates higher-voltage I/O stages. Use separate input filtering where sensor leads are long, maintain consistent reference grounding, and confirm that each channel remains within its common-mode and output-swing limits over the complete process range.

🔧

General Instrumentation

The LM224KDR provides a compact four-channel analog front end for laboratory and industrial instrumentation that needs amplification but not precision-performance specifications. Typical uses include buffer stages, differential amplifiers, gain controls, and active filters. The 14-SOIC package simplifies assembly and the 1.2 MHz gain-bandwidth product supports bandwidth requirements commonly encountered in slow measurement paths. Because the LM224 is a general-purpose amplifier, instrument designers should calculate offset, bias-current, noise, and output-swing contributions against the measurement budget. A stable reference, local supply bypass, and guarded high-impedance input layout are essential for repeatable measurements.

🖥️

Data Acquisition and Interface Conditioning

The LM224KDR is useful in data-acquisition systems requiring several conditioned channels before conversion or digital processing. Four amplifier sections can handle sensor buffers, differential inputs, level shifting, and anti-alias filter stages within the bandwidth supported by the 1.2 MHz gain-bandwidth product. Single-supply operation can simplify systems that share a 5 V or 12 V rail, while split supplies provide more signal headroom for bipolar sensors. Place input and feedback components close to the device, bypass the supply locally, and isolate high-impedance nodes from clocked and switching circuitry. Confirm conversion-driver compatibility and the required settling behavior at the selected closed-loop gain.

What are the key specifications of LM224KDR that engineers should know?
The LM224KDR is a four-channel general-purpose operational amplifier with a 30 V maximum supply voltage, 1.2 MHz gain-bandwidth product, and 2 kV ESD protection. It uses a 14-pin SOIC package and is specified for -25°C to +85°C operation. According to the Texas Instruments LM224 product page and part-details record, these ratings make it appropriate for low-frequency industrial instrumentation, sensor conditioning, active filtering, and split- or single-supply analog circuits.
What is the operating voltage range of LM224KDR?
The LM224KDR operates with a maximum supply voltage of 30 V and can be configured for either a single supply or split supply. The exact minimum operating supply and usable input and output common-mode ranges are not stated in the product-page summary. Texas Instruments identifies the device as a 30 V, four-circuit operational amplifier; consult the manufacturer datasheet for the complete electrical limits before choosing resistor values or input levels.
Where can I download the LM224KDR datasheet PDF?
The authoritative LM224KDR documentation begins on the Texas Instruments LM224 product page at https://www.ti.com/product/LM224. The manufacturer part-details page is available at https://www.ti.com/product/LM224K/part-details/LM224KDR and identifies LM224KDR as a 14-pin SOIC device. Use the datasheet link on the LM224 page for the complete pin configuration, electrical characteristics, recommended operating conditions, and application guidance.
Where is the LM224KDR pinout and 14-SOIC footprint found?
The LM224KDR pin assignment and package drawing are found in the pin-configuration and mechanical-data sections of the Texas Instruments LM224 datasheet. The device is identified as a 14-pin SOIC in the 0.154 in, or 3.90 mm, width package. Use that package drawing when assigning PCB land patterns, and consult the pin-description table before routing power, feedback, and signal connections.
What is the LM224KDR used for in industrial control systems?
The LM224KDR is used in industrial control systems for low-frequency amplification, sensor conditioning, active filtering, and summing or feedback functions. Its four independent channels, 1.2 MHz gain-bandwidth product, 30 V maximum supply rating, and -25°C to +85°C specified range make it suitable for equipment that needs several general-purpose analog channels. The wide supply options also support both grounded single-rail and centered split-rail signal paths.
Is LM224KDR suitable for single-supply and split-supply designs?
Yes. Texas Instruments describes the LM224 family as capable of operating from a single supply or a split supply, and the LM224KDR is the industrial-temperature 14-pin SOIC ordering variant. The device is therefore suitable for battery-derived single-rail systems as well as bipolar systems built around split supplies. Input common-mode voltage, output swing, and ground-reference behavior must still be checked against the electrical limits in the manufacturer datasheet.
What can replace LM224KDR on the same 14-SOIC footprint?
The closest same-brand replacements are the 14-pin SOIC LM224 ordering variants, including LM224K, LM224DR, and LM224DRG3. Each candidate preserves the four-channel LM224 architecture, but temperature grade, device grade, ESD protection, and orderable package suffix can differ. The Texas Instruments part-details record should be checked for the exact operating-temperature range and qualification attributes before approving a substitution.
Is LM224KDR the same as LM224DRG3?
LM224KDR and LM224DRG3 are both orderable LM224 devices associated with the same Texas Instruments family, but their suffix-defined grade and temperature specifications must be compared before interchange. LM224KDR is identified as a 14-SOIC device rated from -25°C to +85°C, while the cross-reference listing does not provide the complete LM224DRG3 electrical table. Confirm pinout, temperature range, device grade, and production requirements in the manufacturer ordering information.
When should I choose LM224KDR over LM224K or LM224DR?
Choose LM224KDR when the design needs the documented -25°C to +85°C operating range, 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 kV ESD protection in a 14-SOIC package. LM224K and LM224DR may represent different grade, temperature, or packaging options, so they should be selected only after their ordering details are checked. The functional decision depends on the exact orderable part rather than the base LM224 family name alone.
What is the best cross-brand equivalent for LM224KDR?
A qualified cross-brand equivalent should be a pin-compatible 14-SOIC quad operational amplifier with comparable supply voltage, gain-bandwidth product, input/output range, ESD rating, and temperature coverage. The available cross-reference information identifies an Analog Devices replacement category but does not name a specific MPN or provide a complete pin-to-pin parameter table. Therefore, no cross-brand MPN is presented as a verified drop-in replacement without that confirmation.
LM224KDR versus LM324KDR: which should be selected?
LM224KDR is the 30 V, 1.2 MHz, 2 kV-ESD-protected industrial-temperature member documented for the LM224 family. LM324KDR may be useful in related 14-SOIC designs, but the available information does not establish every electrical rating needed for a definitive substitution. Compare supply range, input offset, bandwidth, common-mode range, output swing, temperature grade, and ESD protection in the manufacturer datasheets before selecting either device.
Where to buy LM224KDR online and what is its price?
The LM224KDR can be requested through the Request a Quote form on this page for current commercial terms. Available market listings include the Texas Instruments LM224KDR DigiKey record and the Mouser LM224KDR product page. Because pricing and inventory change frequently, use the quote form for a current response rather than relying on a static price figure. The exact requested quantity and shipping destination should be included in the request.
What is the lead time and minimum order quantity for LM224KDR?
The current lead time and minimum order quantity should be requested through the Request a Quote form on this page. A distributor listing states that LM224KDR can ship immediately and shows an in-stock quantity, but stock levels and delivery dates are time-sensitive and do not establish a factory lead-time commitment. Include your required quantity, date code needs, and destination when requesting confirmation from XAIPART.
Is LM224KDR in stock?
LM224KDR availability should be confirmed through the Request a Quote form on this page. A Heisener listing reported 4,864 pieces in stock and immediate shipping when the page was retrieved, while distributor inventory can change without notice. Use the quote request to obtain current stock, authorized-channel traceability, and a delivery commitment for the quantity your production build requires.
How should LM224KDR be decoupled and laid out on a PCB?
Place the supply bypass capacitor as close as practical to the LM224KDR power pins, and keep analog input and feedback traces short and away from switching nodes. Use a common, low-impedance ground return for the four channels, and avoid routing high-current paths beneath sensitive amplifier inputs. According to the Texas Instruments LM224 family information, the device is a frequency-compensated quad amplifier; follow the manufacturer layout and application guidance for final decoupling values.

工程参考数据: LM224KDR ——对比、设计指导和合规信息。

选型指南

Choose LM224KDR when the design requires four general-purpose amplifier channels in a 14-SOIC package, a 30 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and a documented -25°C to +85°C operating range. LM224K and LM224DR are the closest same-family alternatives when their orderable grade and temperature details fit the design, but suffix differences still require verification. LM324KDR may suit a related quad-amplifier design, although its generation-specific electrical ratings must be checked. LM2902KDR is relevant when its distinct temperature or overload characteristics are preferable. No cross-brand MPN is recommended because the available cross-reference material does not identify and verify a specific pin-compatible part. Before approving any replacement, compare the complete pinout, supply limits, common-mode range, output swing, bandwidth, offset, bias current, ESD rating, and operating-temperature limits.

与替代料对比

参数 本产品 LM224K LM224DR LM224DRG3 LM324KDR LM2902KDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC (D) 14-SOIC (D) 14-SOIC (D) 14-SOIC (D) 14-SOIC (D) 14-SOIC (D)
Amplifier Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits

关键差异点

  • Four amplifiers are integrated in one 14-SOIC package (对比 LM224DR)
  • Documented 2 kV ESD protection (对比 LM224DRG3)
  • Industrial operating range with a 30 V maximum supply (对比 LM2902KDR)

设计说明

Place each bypass capacitor directly between the appropriate supply pin and ground, with the shortest practical return path. Keep amplifier inputs, feedback components, and reference nodes away from switching-node copper and high-current outputs. For long sensor leads, terminate inputs close to the source and use a shielded route or passive filtering before the amplifier. Consistent grounding across all four channels is important when one LM224KDR serves multiple measurement channels.

Do not assume the four amplifier channels can operate outside their input common-mode or output-swing limits. Check the selected feedback gain, bias point, load, and power-rail arrangement against the manufacturer electrical characteristics, especially in single-supply operation. Stable resistor and capacitor values must be selected for the intended closed-loop gain and bandwidth. The 1.2 MHz gain-bandwidth product is not a guarantee that every gain configuration remains stable at the highest frequency.

The LM224KDR includes 2 kV ESD protection, but ESD protection does not remove the need for layout-level noise control. Avoid connecting long unprotected traces directly to sensitive inputs, and keep power and signal returns separate where practical. Use a stable low-impedance analog ground for reference returns and place filtering close to the source of interference. Validate conducted and radiated behavior in the final enclosure because board placement and cable routing can dominate practical ESD immunity.

A substitute with the same 14-SOIC footprint does not automatically preserve every operating condition. Before replacing LM224KDR, compare supply voltage, gain-bandwidth product, input offset, input bias current, common-mode range, output swing, output-current capability, ESD rating, noise, and temperature grade. Verify that the replacement is the required amplifier channel arrangement and that its stability requirements match the existing feedback network.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance attributes were not stated in the retrieved product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation or declarations.

相关搜索

LM224KDR datasheet LM224KDR pinout LM224KDR datasheet pdf LM224KDR schematic LM224KDR equivalent LM224KDR replacement LM224KDR cross reference LM224KDR vs LM224DRG3 LM224KDR footprint LM224KDR price LM224KDR stock Texas Instruments LM224KDR LM224 14-SOIC pinout LM224KDR application circuit

相关元器件 & 术语

Texas Instruments LM224KDR LM224 LM224K LM224DR LM224DRG3 LM324KDR LM2902KDR Operational Amplifier Quad Operational Amplifier General-Purpose Amplifier Analog Integrated Circuit Amplifier IC Semiconductor Gain-Bandwidth Product 1.2 MHz 30 V 2 kV ESD Protection Single Supply Split Supply Industrial Temperature Range 14-SOIC SOIC Family Surface-Mount Package Signal Conditioning
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情