Texas Instruments

LM258H/NOPB - Dual 32V 700kHz Op Amp | Texas Instruments

料号: LM258H/NOPB ✓ 量产中
32 V Vdss TO-99-8 metal can Package Internally frequency compensated Speed
最小起订量: 1 |

LM258H/NOPB 概述

Texas Instruments LM258H/NOPB is a dual general-purpose operational amplifier with a 32 V maximum supply rating, 700 kHz gain-bandwidth product, and an 8-pin TO-99 metal-can package. The LM258 family combines two independent, internally frequency-compensated amplifiers, making it suitable for signal conditioning, feedback control, and general analog signal processing.

An operational amplifier is an active analog component that uses high open-loop gain and negative feedback to amplify the difference between two input voltages. Within the semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and analog signal-processing categories. Internally compensated designs simplify closed-loop implementation because they do not require an external compensation capacitor, although stability still depends on the gain, load, and feedback network selected by the designer.

The principal features of the LM258H/NOPB are its dual-amplifier configuration, 700 kHz gain-bandwidth product, 32 V supply rating, and -25°C to 85°C operating-temperature range. It is designed for operation from a single positive supply or split supplies. Two independent amplifiers can implement separate gain stages, differential buffering, comparators, or active filters within one package, reducing board area when a conventional metal-can package is appropriate.

The LM258 family uses a bipolar voltage-feedback architecture with internal frequency compensation. At low closed-loop gains, internal compensation provides stable operation without external compensation components. The maximum output current, input bias current, input offset voltage, slew rate, common-mode input range, and output swing limits must be checked against the exact operating conditions in the manufacturer datasheet before a high-impedance or precision design is released.

Typical uses include low-frequency active filters, transducers, sensor interfaces, sample-and-hold stages, and general-purpose control loops. Industrial instrumentation can benefit from the relatively high supply-voltage tolerance, while audio and communications equipment can use the two amplifiers for independent signal paths. The metal-can TO-99 construction also makes the device suitable for established through-hole industrial designs that predate surface-mount packages.

When laying out an LM258H/NOPB circuit, keep feedback-loop traces short, place input and output compensation or decoupling components close to their associated pins, and avoid long unprotected routes beside high-current switching nodes. Check the available output-current margin against the load, because a dual amplifier does not increase the current rating of either individual output stage. The leaded package requires adequate hole clearance and mechanical support where vibration or thermal cycling is significant.

This product page combines the manufacturer identification, ordering information, family-level specifications, package details, application guidance, and engineering-oriented selection criteria. It also distinguishes drop-in family options by temperature range and supply behavior, helping designers reuse an existing TO-99 layout without overlooking qualification, grounding, or input-common-mode restrictions.

直接替换替代料: LM258H/NOPB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM258H/NOPB (相同外形与封装尺寸) ——差异在于 Gain-Bandwidth Product, Operating Temperature Range.

Texas Instruments
Gain-Bandwidth Product: 1 MHz
Operating Temperature Range: 0 °C to 70 °C

LM158H/NOPB

✅ 直接替换 ⚠️ 规格未核验
📦 TO-99-8
Operating-temperature coverage extends from -55°C to +125°C versus -25°C to +85°C for LM258H/NOPB, while retaining the dual TO-99 amplifier arrangement

📋 参考替代料(不在目录中)

LM358H/NOPB

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 TO-99-8
Dual general-purpose operational amplifier · 2 channels · 32 V · 1 MHz · 0 °C to 70 °C · TO-99-8 metal can · 8 pins · Through-hole

联系询价

查看数据手册 →

LM2904H/NOPB

✅ 直接替换 ⚠️ 规格未核验
📦 TO-99-8
Typical operating-temperature coverage is -40°C to +125°C versus -25°C to +85°C for LM258H/NOPB, while preserving the dual TO-99 footprint

📋 参考替代料(不在目录中)

LM258AH/NOPB

✅ 直接替换 ⚠️ 规格未核验
📦 TO-99-8
Extended-temperature coverage is -55°C to +125°C versus -25°C to +85°C for LM258H/NOPB, with the same dual TO-99 package arrangement

📋 参考替代料(不在目录中)

LM358AH/NOPB

✅ 直接替换 ⚠️ 规格未核验
📦 TO-99-8
Extended-temperature coverage is -55°C to +125°C versus -25°C to +85°C for LM258H/NOPB, while retaining the same dual TO-99 package arrangement

📋 参考替代料(不在目录中)

LM258H/NOPB 最大额定值与电气特性

Amplifier Count 2 amplifiers
Product Type Dual general-purpose operational amplifier
Maximum Supply Voltage 32 V
Manufacturer Family Supply Rating 30 V
Gain-Bandwidth Product 700 kHz
工作温度范围 -25°C to +85°C
封装 TO-99-8 metal can
Total Pin Count 8 pins
Architecture Voltage-feedback bipolar operational amplifier
Frequency Compensation Internally frequency compensated
Supply Configuration Single or split supply
Amplifier Independence 2 independent amplifiers
安装类型 Through-hole
RoHS 状态 Compliant

LM258H/NOPB to-99-8 metal can 引脚配置指南

LM258H/NOPB(to-99-8 metal can 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM258H/NOPB 的 to-99-8 metal can 封装引脚图

暂无详细引脚数据: LM258H/NOPB.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM258H/NOPB 适用于 6 应用s: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffering, Power Supply Feedback Control, Active Filter and Waveform Conditioning, Communications Receive Chain, Test and Measurement Front End.

🏭

Industrial Sensor Signal Conditioning

The LM258H/NOPB suits low-frequency sensor-conditioning stages that must operate from -25°C to +85°C. Its two internally frequency-compensated amplifiers can process separate sensor channels without requiring external compensation capacitors, while the 700 kHz gain-bandwidth product provides more bandwidth than most slow sensor signals require. Place the device near the sensor interface, use short feedback paths, and keep high-impedance input traces away from switching nodes. Because the two amplifiers share a package and supply, each output must remain within the device's load-current capability. Verify input bias current, offset voltage, common-mode range, and output swing for the particular sensor before finalizing the gain network.

🎧

Audio Preamplifier and Buffering

LM258H/NOPB can provide general-purpose voltage gain and impedance buffering for low-frequency audio-control or line-level paths. Its 700 kHz gain-bandwidth product supports audio-band amplification, and the internal compensation removes the need for an external stability capacitor in standard closed-loop configurations. One amplifier may amplify a source while the other buffers an output or forms an active filter. The TO-99 metal-can package is mechanically robust for legacy and industrial audio equipment. Keep the feedback loop compact, observe the output-swing limits at the chosen supply voltage, and ensure the load does not exceed the individual output-stage current rating. Input and output grounding should use a quiet return path to avoid adding ground-dependent noise.

⚡

Power Supply Feedback Control

The LM258H/NOPB is appropriate for slow feedback loops in linear power-supply and voltage-control circuits where a 700 kHz gain-bandwidth product is adequate. One amplifier may compare a scaled feedback voltage with a reference, while the other can provide error amplification, gain, or an additional buffer. Internal frequency compensation simplifies conventional closed-loop layouts, but loop stability still depends on the power-stage pole, compensation network, and load. Keep the high-impedance comparison node short and shielded from power-stage switching activity. Confirm common-mode input range across the complete supply startup and load range. The -25°C to +85°C specification makes this ordering code appropriate for industrial environments that remain within that envelope.

📡

Active Filter and Waveform Conditioning

LM258H/NOPB can implement first-order active filters, integrators, and waveform-conditioning networks at low frequencies. The 700 kHz gain-bandwidth product gives substantial loop bandwidth compared with many sensor, control, and audio-band signals, while internal compensation supports common closed-loop configurations without an added compensation capacitor. Two independent amplifiers allow separate filter sections or a cascaded two-stage response in one through-hole package. Select resistor and capacitor values so the desired closed-loop gain remains compatible with the amplifier's stability behavior, and check each capacitor's dielectric characteristics for the signal frequency. Place feedback components directly beside their associated pins and maintain symmetrical routing to minimize added delay and unintended feedback.

🌐

Communications Receive Chain

LM258H/NOPB can serve as a low-frequency gain or buffer stage within established communications equipment that uses through-hole analog boards. Its two-channel architecture can handle separate receive paths, and its 700 kHz gain-bandwidth product is suitable for many baseband and control signals rather than high-definition radio-frequency amplification. The 32 V ordering rating accommodates established industrial supply rails, but actual rail current and common-mode headroom must be verified. Use a single low-impedance ground reference, keep input leads short, and isolate the amplifier from motor contacts, relay transients, and switching supplies. For RF or wideband applications, select a higher-bandwidth amplifier; LM258H/NOPB is primarily a general-purpose, low-frequency signal-conditioning device.

🔧

Test and Measurement Front End

LM258H/NOPB can form a buffer, gain stage, or active filter ahead of instrumentation and measurement converters. Two independent amplifiers make it possible to condition a differential pair, preserve source impedance, or combine filter and buffer functions in one 8-pin TO-99 package. Its 700 kHz gain-bandwidth product is suitable for many low- and mid-band measurement signals, while the -25°C to +85°C range covers typical controlled industrial or laboratory environments. Keep high-impedance nodes away from panel wiring and relay contacts, and terminate unused amplifier inputs according to the datasheet guidance. Confirm offset, bias-current, common-mode, and output-swing requirements before claiming measurement accuracy.

Where can I buy LM258H/NOPB online?
The LM258H/NOPB can be requested through the Request a Quote form on this product page, where the exact ordering code, quantity, and delivery requirements can be reviewed. The device is a Texas Instruments dual operational amplifier supplied in an 8-pin TO-99 metal-can package. Current commercial availability should be confirmed through that form rather than assumed from general catalog availability of the broader LM258 family.
What is the price of LM258H/NOPB?
Use the Request a Quote form on this page for the current commercial terms of the Texas Instruments LM258H/NOPB. The ordering code identifies a dual, 700 kHz operational amplifier in an 8-pin TO-99 metal-can package with a -25°C to 85°C operating-temperature range. Quote requests allow the quantity, authorized-channel status, and delivery schedule to be considered together.
What is the lead time for LM258H/NOPB?
The current lead time for LM258H/NOPB should be requested through the Request a Quote form on this page. Texas Instruments identifies the part as a dual operational amplifier in the LM258 family, with a 32 V ordering rating, 700 kHz gain-bandwidth product, and an 8-pin TO-99 package. The form is the appropriate route for confirming quantity availability and production scheduling.
Is LM258H/NOPB in stock?
LM258H/NOPB availability should be confirmed through the Request a Quote form on this page for the required quantity and target date. The part is listed as active in manufacturer and distributor product information and uses the TO-99-8 metal-can package. Confirmation through a formal quote avoids treating catalog presence or family-level stock as a guarantee of the exact ordering code.
What are the key specifications of LM258H/NOPB that engineers should know?
The LM258H/NOPB is a dual, general-purpose operational amplifier with a 32 V maximum supply rating, a 700 kHz gain-bandwidth product, and an operating-temperature range of -25°C to 85°C. According to the Texas Instruments LM258 datasheet, the device contains two independent, internally frequency-compensated amplifiers in an 8-pin TO-99 metal-can package. It can operate from a single positive supply or split supplies.
What is the operating voltage of LM258H/NOPB?
The LM258H/NOPB is identified with a 32 V maximum supply rating, while the broader Texas Instruments LM258 family is also described with a 30 V rating. According to the manufacturer product information, the exact H/NOPB ordering code is a dual, 32 V, 700 kHz operational amplifier. The datasheet supply limits and the actual rail voltages must be checked before applying the device.
LM258H/NOPB vs LM358H - which is better for industrial control?
LM258H/NOPB is generally the better choice when the enclosure is guaranteed to remain between -25°C and +85°C, because that is its specified operating range. LM358-family devices use a different temperature window and should be selected only after their individual ordering variant is confirmed. Both are low-power dual operational amplifiers, but package, temperature grade, and common-mode limits must match the design.
What is the difference between LM258H/NOPB and LM2904H?
The principal documented family-level difference is operating-temperature coverage: LM258H/NOPB is specified from -25°C to +85°C, whereas the LM2904 family is commonly offered in a wider industrial temperature grade. Both provide two low-power operational amplifiers in leaded package options, including TO-99. Confirm exact pinout and electrical limits for each ordering code before treating either part as a substitute.
When should I choose LM258H/NOPB over LM158H?
Choose LM258H/NOPB when the operating environment falls within -25°C to +85°C and the application does not require the military-temperature coverage associated with the LM158 family. LM158H is useful when extended-temperature operation is required. Because the H-package devices use the same general dual-amplifier architecture, temperature qualification and exact electrical limits are the decisive selection factors.
Is LM258H/NOPB suitable for industrial sensor interfaces?
LM258H/NOPB is suitable for many industrial sensor-interface circuits when the ambient temperature remains within -25°C to +85°C and the signal lies within the device's input-common-mode range. Its two internally compensated amplifiers can handle separate amplification or buffering channels at 700 kHz gain-bandwidth product. Check input bias current, offset voltage, output swing, and source impedance before using it with high-impedance sensors.
What is the best drop-in replacement for LM258H/NOPB?
The closest same-package alternatives are LM158H/NOPB, LM358H/NOPB, LM2904H/NOPB, LM258AH/NOPB, and LM358AH/NOPB, all using the 8-pin TO-99 family arrangement. Their temperature ratings differ, so no alternative is universally interchangeable. No verified cross-brand TO-99 drop-in candidate was identified, and every replacement still requires pinout, common-mode, output-swing, and load-current review.
Can LM358H/NOPB replace LM258H/NOPB?
LM358H/NOPB can serve as a same-package family replacement after temperature and electrical limits are checked. LM358H/NOPB has a narrower typical temperature range than LM258H/NOPB, which is specified for -25°C to +85°C. Because both are dual, internally compensated operational amplifiers in TO-99 packages, the pin arrangement is compatible, but supply, input-common-mode, and output-swing conditions still govern suitability.
What can replace LM258H/NOPB?
Potential drop-in choices include LM158H/NOPB, LM358H/NOPB, LM2904H/NOPB, LM258AH/NOPB, and LM358AH/NOPB because they use the same TO-99 dual-amplifier package arrangement. The key trade-off is operating-temperature coverage, not package placement. Review the exact manufacturer datasheet for each ordering code before substituting it into industrial, automotive, or extended-temperature equipment.
Where to download the LM258H/NOPB datasheet PDF?
The official LM258 family information and ordering resources are available on the Texas Instruments product page at https://www.ti.com/product/LM258. The LM258H/NOPB ordering details are identified at https://www.ti.com/product/LM258-N/part-details/LM258H/NOPB. Use the manufacturer datasheet to verify the complete pin description, electrical characteristics, supply limits, and ordering information before layout release.
Where can I find the LM258H/NOPB pinout?
The LM258H/NOPB pin assignment is documented in the Texas Instruments LM258 datasheet and its TO-99 package drawing. The device has eight pins in a metal-can package, with two independent amplifier sections. Use the datasheet pin-description table when assigning supply, output, and input connections, and preserve the manufacturer's metal-can orientation and mechanical dimensions in the PCB footprint.

工程参考数据: LM258H/NOPB ——对比、设计指导和合规信息。

选型指南

Choose LM258H/NOPB for a legacy or industrial through-hole design that requires two internally compensated general-purpose amplifiers, a 700 kHz gain-bandwidth product, and operation from -25°C to +85°C. Select LM158H/NOPB or LM258AH/NOPB when the equipment must operate from -55°C to +125°C. Use LM2904H/NOPB when a broader -40°C to +125°C industrial range is preferable. LM358H/NOPB is suitable when a narrower 0°C to +70°C operating range is acceptable, while LM358AH/NOPB provides extended-temperature operation. All five candidates retain the TO-99 family arrangement, but substitution still requires checking the exact pin description, common-mode range, output swing, load capability, and manufacturer ordering specifications.

与替代料对比

参数 本产品 LM158H/NOPB LM358H/NOPB LM2904H/NOPB LM258AH/NOPB LM358AH/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TO-99-8 TO-99-8 TO-99-8 TO-99-8 TO-99-8 TO-99-8
Amplifier Count 2 2 2 2 2 2
Operating Temperature Range -25°C to +85°C -55°C to +125°C 0°C to +70°C -40°C to +125°C -55°C to +125°C -55°C to +125°C
Frequency Compensation Internal Internal Internal Internal Internal Internal
Supply Configuration Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

关键差异点

  • Broader standard-temperature coverage than the LM358H option (对比 LM358H/NOPB)
  • Narrower temperature rating than the industrial LM2904H option (对比 LM2904H/NOPB)
  • Lower-temperature operation than the military-grade LM158H option (对比 LM158H/NOPB)

设计说明

Treat the TO-99 metal-can orientation as a mechanical and electrical constraint, not merely a footprint choice. Confirm the pin-numbering diagram and package dimensions in the Texas Instruments LM258 datasheet before releasing the PCB. Both amplifier sections must have valid input states, unused inputs should be connected according to the datasheet guidance, and the common-mode input range must be checked at startup as well as during normal operation.

Place input, feedback, and compensation components directly beside their associated TO-99 pins to minimize parasitic capacitance and feedback-loop area. Route the two amplifier channels separately where they carry uncorrelated signals, and keep high-impedance input nets away from relay contacts, inductors, and switching-node copper. The long through-hole leads provide useful layout flexibility, but excess lead length can increase coupling and make the feedback behavior harder to predict.

Check each amplifier's output current independently because the two sections do not increase the current capability of the other section. The LM258H/NOPB supports single or split supply operation, but the usable input and output range changes with the rail voltage. Verify common-mode headroom and output swing for the minimum supply used during startup. A bypass capacitor near the supply pins should be selected from the datasheet's recommended network and kept on the same ground reference as the analog signal path.

Use a 700 kHz gain-bandwidth product as the principal bandwidth reference and keep the intended closed-loop gain within the stable operating range of the internally compensated amplifier. Avoid relying on excessive closed-loop gain to overcome input-offset or noise limitations. For active filters and integrators, verify capacitor dielectric behavior at the signal frequency and keep the feedback loop compact so parasitic delay does not alter phase margin.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is identified in the manufacturer part comparison information. No definitive REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status was identified for this exact ordering code.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LM258H/NOPB datasheet LM258H/NOPB datasheet pdf LM258H/NOPB pinout LM258H/NOPB equivalent LM258H/NOPB replacement LM258H/NOPB price LM258H/NOPB stock Texas Instruments LM258H/NOPB LM258H/NOPB TO-99 pinout LM258H/NOPB vs LM2904H/NOPB LM258H/NOPB vs LM358H/NOPB LM258H/NOPB application circuit

相关元器件 & 术语

Texas Instruments LM258H/NOPB LM158H/NOPB LM358H/NOPB LM2904H/NOPB LM258AH/NOPB LM358AH/NOPB operational amplifier dual operational amplifier voltage-feedback amplifier analog IC semiconductor bipolar amplifier gain-bandwidth product frequency compensation common-mode input range output swing input offset voltage input bias current TO-99-8 TO-99 metal can through-hole package industrial control sensor interface active filter
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情