STMicroelectronics

LM2903HYPT - Dual Open-Collector Comparator | STMicroelectronics

料号: LM2903HYPT ✓ 量产中
2 V to 36 V Vdss 0.4 mA per comparator Id 8-TSSOP Package
最小起订量: 1 |

LM2903HYPT 概述

The STMicroelectronics LM2903HYPT is a low-power dual differential voltage comparator with two open-collector outputs, a 2 V to 36 V single-supply range, and an 8-TSSOP package. Each comparator operates from dual supplies of ±1 V to ±18 V, responds in 1.3 µs typically, and draws 0.4 mA per comparator.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM2903HYPT belongs to the comparator hierarchy within analog ICs and interface electronics. Its differential inputs suit threshold, window, overvoltage, and sensor-conditioning circuits, while the open-collector outputs allow wired AND operation, level translation, or pull-up-based interfacing.

Each channel offers a typical input offset voltage of 1 mV, input offset current of ±5 nA, and input bias current of 25 nA. The input common-mode range includes ground, making the device useful in single-supply systems in which signals approach the lower supply rail. Output saturation voltage is 250 mV typical with 4 mA output current, and the outputs are compatible with DTL, TTL, CMOS, ECL, and MOS logic families.

The two independent comparators operate over a −40 °C to +150 °C temperature range. The HYPT ordering code places the device in an 8-TSSOP package supplied in tape-and-reel format. Its automotive qualification and RoHS-compliant construction support demanding industrial, automotive, and sensing applications where low input bias, wide supply range, and open-collector interface flexibility are important.

Typical uses include battery-powered monitoring, industrial sensor interfaces, overvoltage protection, control-loop threshold detection, and open-drain alarm signaling. The 36 V maximum single-supply operation also permits direct monitoring of higher-voltage systems when the input and supply ratings are respected.

For reliable implementation, place input and output traces away from fast-switching nodes, provide a pull-up resistor on each open-collector output, and verify common-mode, differential-input, and output-current limits against the manufacturer datasheet. The low input bias current helps preserve sensor accuracy, while the open-collector output requires an external pull-up.

This page combines exact operating specifications, pin-level implementation guidance, application analysis, and package-compatible replacement information to support faster design-in and sourcing decisions.

直接替换替代料: LM2903HYPT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM2903HYPT (相同外形与封装尺寸) ——差异在于 Automotive Qualification, Comparator Type, Input Offset Voltage, Logic Compatibility, Output Type.

Texas Instruments
Automotive Qualification: AEC-Q100 Grade 0 and Grade 1
Comparator Type: Dual differential comparator
Input Offset Voltage: 2 mV typical
对比 LM2903HYPT →

LM2903YMPT

✅ 直接替换
📦 TSSOP-8 (PW)
Automotive-grade ordering variant with the same 2 V to 36 V supply class; qualification labeling differs from the LM2903HYPT ordering code by up to 0 percentage points in the core functional ratings

📋 参考替代料(不在目录中)

LM2904YHPT

✅ 直接替换
📦 TSSOP-8 (PW)
Open-collector dual comparator with the same wide supply class and 8-TSSOP footprint; propagation and offset limits should be checked because the LM2904 is a related rather than identical internal design

📋 参考替代料(不在目录中)

LM2904YMPT

✅ 直接替换
📦 TSSOP-8 (PW)
Automotive ordering variant of the LM2904 dual comparator; supply class and open-collector interface align, with related-family timing and offset differences requiring final limit verification

📋 参考替代料(不在目录中)

LM2903YDR

✅ 直接替换
📦 TSSOP-8 (PW)
Same dual open-collector comparator function in TSSOP-8; nominal supply and timing are comparable, while manufacturer-specific qualification and limit values may differ by approximately 10 percent

📋 参考替代料(不在目录中)

LM2903QDRQ1

✅ 直接替换
Texas Instruments
📦 TSSOP-8 (PW)
Dual differential comparator · 2 · AEC-Q100 Grade 0 and Grade 1 · 2 V to 36 V · Total supply difference of 2 V to 36 V · 0.4 mA per comparator · 2 mV typical · 25 nA typical

联系询价

查看数据手册 →

LM2903HYPT 最大额定值与电气特性

Comparator Count 2 comparators
Comparator Type Dual differential voltage comparator
输出类型 Open-collector
Single-Supply Voltage Range 2 V to 36 V
Dual-Supply Voltage Range ±1 V to ±18 V
电源电流 0.4 mA per comparator
Low-Voltage Supply Consumption 1 mW per comparator at 5 V
Input Bias Current 25 nA typical
Input Offset Current ±5 nA typical
Input Offset Voltage 1 mV typical
Response Time 1.3 µs typical
Output Saturation Voltage 250 mV typical at 4 mA output current
Input Common-Mode Range Includes ground
工作温度范围 -40 °C to +150 °C
封装 8-TSSOP
Logic Compatibility DTL, TTL, CMOS, ECL, and MOS
Automotive Qualification AEC-Q100 qualified
RoHS 状态 Compliant

LM2903HYPT 引脚配置

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
引脚 1 OUT1 — Comparator 1 open-collector output
引脚 2 IN1- — Comparator 1 inverting input
引脚 3 IN1+ — Comparator 1 non-inverting input
引脚 4 V- — Ground or negative supply connection
引脚 5 IN2+ — Comparator 2 non-inverting input
引脚 6 IN2- — Comparator 2 inverting input
引脚 7 OUT2 — Comparator 2 open-collector output
引脚 8 V+ — Positive supply connection

典型应用

LM2903HYPT 适用于 6 应用s: Automotive Sensor Threshold Detection, Industrial Overvoltage Protection, Battery-Powered Monitoring, Open-Drain Alarm Signaling, Precision Signal Crossing Detection, Embedded Control Logic Interface.

🚗

Automotive Sensor Threshold Detection

The LM2903HYPT fits automotive sensor-monitoring circuits that compare a conditioned sensor signal against a reference threshold. Its 25 nA typical input bias current minimizes loading on high-impedance sensors, while the 1.3 µs typical response supports prompt decision-making. Each channel can compare one signal or form a window detector. The −40 °C to +150 °C operating range and AEC-Q100 qualification are valuable for vehicle environments. Use the open-collector output with an appropriate pull-up to drive a discrete logic input, warning lamp driver, or diagnostic input. Verify transient protection, common-mode limits, and grounding before connecting external sensor wiring.

🏭

Industrial Overvoltage Protection

The LM2903HYPT can supervise a divided industrial signal and assert a fault indication when the monitored voltage crosses a programmed limit. Its wide 2 V to 36 V single-supply range supports systems operating above conventional low-voltage logic rails, while the input common-mode range including ground simplifies low-side sensing arrangements. The 250 mV typical saturation voltage at 4 mA provides a useful open-collector fault node. Add a suitably rated pull-up and account for output-leakage effects at high temperature. The comparator should be placed close to the divider and protected from switching transients to avoid false threshold crossings.

⚡

Battery-Powered Monitoring

The LM2903HYPT is suitable for low-power battery monitoring because each comparator typically consumes only 0.4 mA. It can compare a cell-derived voltage against a precision reference to detect low-battery or overvoltage conditions, and its low 25 nA typical input bias current helps avoid disturbing resistive dividers or high-impedance sensing networks. The open-collector output can be pulled up to a logic rail while keeping the device compatible with low-power system signaling. Designers should evaluate quiescent consumption over the complete battery voltage range and include the pull-up current in the complete standby-power budget.

🧩

Open-Drain Alarm Signaling

The LM2903HYPT can implement an open-drain alarm bus when multiple monitoring functions must share a wired signal. Each comparator output can pull the shared line low, while the pull-up establishes the inactive high state. The 36 V single-supply maximum provides flexibility for industrial interfaces, and the 1.3 µs typical response is sufficient for many warning and interlock functions. Because the device does not actively drive the output high, calculate the maximum pull-up resistor from the required sink current and minimum bus rise time. Check leakage from all attached nodes and ensure that the bus voltage remains inside the output and absolute maximum ratings.

🔧

Precision Signal Crossing Detection

The LM2903HYPT is appropriate for detecting when an analog signal crosses a defined reference level. Its typical input offset voltage of 1 mA-equivalent comparator threshold accuracy class, ±5 nA input offset current, and 1.3 µs response provide useful performance for general industrial signal conditioning. Two channels can support both overvoltage and undervoltage detection around a reference window. The input common-mode range includes ground, which is advantageous for single-supply systems sensing signals near 0 V. For precision applications, evaluate offset and propagation-delay variation over temperature rather than relying only on typical values, and use hysteresis or filtering where chatter around the threshold would be unacceptable.

🖥️

Embedded Control Logic Interface

The LM2903HYPT can bridge a slowly changing analog condition to an embedded controller input by comparing the condition with a reference and providing an open-collector status signal. The output is compatible with DTL, TTL, CMOS, ECL, and MOS logic families, allowing a pull-up to the controller's supply voltage when the electrical interface permits it. The dual-channel arrangement supports two independent conditions, such as a temperature limit and a power-good indication. Keep the comparator path short, use a pull-up value that balances speed and current, and account for the difference between the comparator supply and the logic pull-up supply when evaluating input levels.

推荐产品汇总

LM2903 Related dual-comparator family reference 用于: Automotive Sensor Threshold Detection, Industrial Overvoltage Protection, Battery-Powered Monitoring, Open-Drain Alarm Signaling, Precision Signal Crossing Detection, Embedded Control Logic Interface LM2903B Automotive dual-comparator family reference 用于: Automotive Sensor Threshold Detection, Precision Signal Crossing Detection LM2904 Related open-collector comparator family 用于: Industrial Overvoltage Protection, Battery-Powered Monitoring, Open-Drain Alarm Signaling, Embedded Control Logic Interface
What is the LM2903HYPT?
The LM2903HYPT is a dual differential voltage comparator from STMicroelectronics with two independent open-collector outputs in an 8-TSSOP package. According to the manufacturer datasheet, each channel operates from a single 2 V to 36 V supply or from dual ±1 V to ±18 V supplies and has a typical response time of 1.3 µs.
What is the operating voltage of LM2903HYPT?
The LM2903HYPT supports a 2 V to 36 V single-supply operating range and a ±1 V to ±18 V dual-supply range. The manufacturer datasheet identifies these as the supported supply configurations. Designers should also observe the separate limits for differential input voltage and input common-mode voltage.
What are the key specifications of LM2903HYPT that engineers should know?
The LM2903HYPT is a low-power dual comparator with a 1.3 µs typical response time, 25 nA typical input bias current, ±5 nA typical input offset current, and 1 mV typical input offset voltage. The manufacturer datasheet specifies 0.4 mA supply current per comparator, a 250 mV typical output saturation voltage at 4 mA, and operation from −40 °C to +150 °C.
Where can I download the LM2903HYPT datasheet PDF?
The LM2903HYPT datasheet PDF is available through the manufacturer documentation links and the technical document listed on this page. Use the manufacturer datasheet for the authoritative pin configuration, absolute maximum ratings, input common-mode limits, output characteristics, and recommended application circuit before releasing a PCB design.
Where can I find the LM2903HYPT pinout?
The LM2903HYPT uses an 8-TSSOP footprint with pins 1 and 7 assigned to the two open-collector outputs, pins 2, 3, 5, and 6 assigned to differential inputs, pin 4 assigned to ground, and pin 8 assigned to the positive supply. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and the pull-up resistors.
How do I use the open-collector outputs of LM2903HYPT?
Each LM2903HYPT output requires an external pull-up resistor because the output stage can pull the node low but cannot actively drive it high. According to the manufacturer datasheet, output saturation is 250 mV typical at 4 mA. Select the resistor to balance sink-current capability, rise time, power dissipation, and the voltage tolerated by the connected logic input.
Where can I buy LM2903HYPT online?
The LM2903HYPT can be requested through the Request a Quote form on this page, which supports direct sourcing without relying on an external seller listing. Include the required quantity, package, target price, and delivery destination in the request so the current commercial terms and lead time can be confirmed for the exact LM2903HYPT ordering code.
What is the price of LM2903HYPT?
The current price of LM2903HYPT is handled through the Request a Quote form on this page rather than a static price statement. Submit the required quantity and shipment details to obtain current commercial terms for the exact 8-TSSOP ordering code. Volume breaks and delivery timing should be confirmed with the resulting quotation.
What is the lead time for LM2903HYPT?
Lead time for LM2903HYPT depends on current inventory, order quantity, and the selected delivery terms. Use the Request a Quote form on this page and state the required quantity, date code preference, and destination. This allows the current manufacturing and fulfillment position to be checked for the exact automotive-grade TSSOP part.
Is LM2903HYPT in stock?
Current LM2903HYPT stock should be confirmed through the Request a Quote form on this page because availability can change with quantity and replenishment. The requested quotation can identify the current stock position for the exact 8-TSSOP ordering code and include the expected allocation and delivery schedule.
What can replace LM2903HYPT?
A true replacement for LM2903HYPT should use the same 8-TSSOP footprint, preserve the differential-input pin assignments, and provide compatible open-collector outputs. Suitable candidates include the STMicroelectronics LM2903 and LM2904 families in compatible package variants, plus suitable Texas Instruments LM2903 TSSOP variants. Review supply voltage, response time, input bias, and output-level differences before production use.
Is LM2903HYPT the same as the Texas Instruments LM2903?
The STMicroelectronics LM2903HYPT and Texas Instruments LM2903 implement the same general dual-comparator function, but exact interchangeability depends on package, pinout, electrical limits, and qualification. A compatible TSSOP variant may offer pin-for-pin replacement, while SOIC versions require a different footprint. Compare the manufacturer pin tables and absolute maximum ratings before substitution.
LM2903HYPT vs LM2903YDR: which is better for a TSSOP design?
The LM2903HYPT is the automotive-oriented STMicroelectronics version in 8-TSSOP, while LM2903YDR is a Texas Instruments LM2903 family option in a TSSOP package. Selection should prioritize operating temperature qualification, supplier availability, and verified electrical differences. Both provide two comparators with open-collector outputs, but the manufacturer pin and limit tables must be checked before treating them as interchangeable.
When should I choose LM2903HYPT over another dual comparator?
Choose LM2903HYPT when the design needs a low-power dual comparator, open-collector outputs, operation from a single 2 V to 36 V supply, low 25 nA typical input bias current, and a temperature range extending to +150 °C. It is particularly suitable for automotive, industrial, and sensor-monitoring circuits that can use pull-up-based open-collector interfacing.
Is LM2903HYPT suitable for battery-powered monitoring?
The LM2903HYPT is suitable for battery-powered monitoring when its 0.4 mA typical supply current per comparator is acceptable and the monitored signal stays within the input common-mode limits. Its 25 nA typical input bias current minimizes sensor-loading error, while the open-collector output supports a pulled-up alarm or logic node. Confirm the complete input and output operating envelope in the manufacturer datasheet.

工程参考数据: LM2903HYPT ——对比、设计指导和合规信息。

选型指南

Choose the LM2903HYPT when the design needs two low-power comparators with open-collector outputs, a 2 V to 36 V single-supply range, low input bias current, and operation across −40 °C to +150 °C. It is a strong fit for automotive sensing, industrial threshold supervision, battery monitoring, and open-drain alarm buses. Select LM2903YMPT when its specific ordering and qualification configuration matches the qualification plan. Consider LM2904YHPT or LM2904YMPT when the related STMicroelectronics family provides the required electrical behavior, but verify timing and offset specifications individually. LM2903YDR and LM2903QDR are useful Texas Instruments TSSOP alternatives for multi-source designs, with LM2903QDR suited to automotive qualification. In every case, confirm the exact pin assignments, absolute maximum ratings, open-collector pull-up arrangement, and manufacturer-specific electrical limits before production substitution.

与替代料对比

参数 本产品 LM2903YMPT LM2904YHPT LM2904YMPT LM2903YDR LM2903QDR
Package TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments
Comparator Count 2 comparators 2 comparators 2 comparators 2 comparators 2 comparators 2 comparators
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

关键差异点

  • Wide single-supply operating range (对比 LM2903YDR)
  • Automotive-oriented ordering option (对比 LM2903YMPT)
  • Low input bias for high-impedance sensing (对比 LM2904YHPT)
  • Open-collector interface flexibility (对比 LM2903QDR)

设计说明

Do not treat an open-collector output as a push-pull logic output. Attach a pull-up resistor to each output, and calculate its maximum value from the required output rise time, total bus capacitance, output leakage, and the minimum 4 mA sink condition cited in the manufacturer datasheet. Confirm that every pulled-up node remains below the output-voltage and absolute-maximum limits when all attached inputs can be high-impedance.

Place the comparator inputs and their reference divider close to the device, and keep those traces away from switching-node copper and high-current return paths. The 25 nA typical input bias is low, but input offset current and leakage can still shift a high-impedance threshold over temperature. A solid ground connection at pin 4 and short supply routing reduce common-mode errors in the 1 mV typical offset class.

The manufacturer datasheet specifies a wide 2 V to 36 V single-supply operating range, but the output pull-up may use a different voltage. Verify the output-state voltage, input common-mode range, and differential-input limit independently of the supply rating. In battery systems, include the comparator's 0.4 mA typical current per channel and the pull-up current in the complete power budget.

Add appropriate hysteresis when the compared signal has noise or a slow crossing slope. Hysteresis prevents repeated output transitions near the threshold, while output filtering can reduce chatter when the input crosses slowly. Avoid excessive filtering where the intended response depends on the 1.3 µs typical propagation speed, and validate the complete threshold behavior over temperature.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance and AEC-Q100 qualification are identified for LM2903HYPT. Other environmental and material-compliance fields are not established by the available technical records.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LM2903HYPT datasheet LM2903HYPT pinout LM2903HYPT datasheet pdf LM2903HYPT equivalent LM2903HYPT replacement LM2903HYPT cross reference LM2903HYPT vs LM2903YDR LM2903HYPT TSSOP-8 footprint LM2903HYPT price LM2903HYPT stock STMicroelectronics LM2903HYPT LM2903HYPT open collector comparator LM2903HYPT automotive sensor monitoring what is LM2903HYPT

相关元器件 & 术语

STMicroelectronics LM2903HYPT LM2903 LM2904 LM2903YMPT LM2904YHPT LM2904YMPT LM2903YDR LM2903QDR voltage comparator dual differential comparator analog comparator open-collector output TSSOP-8 surface-mount package single-supply operation dual-supply operation input common-mode voltage input offset voltage input bias current automotive electronics industrial monitoring AEC-Q100 RoHS sensor threshold detection
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情