LM358PSR - Dual Op Amp, 8-SO | Texas Instruments
料号: LM358PSR ✓ 量产中LM358PSR 概述
An operational amplifier is an analog integrated circuit that compares two input voltages and produces an output voltage determined by external feedback components. When configured with negative feedback, the closed-loop gain is established primarily by external resistors. Operational amplifiers can also be used as voltage buffers, comparators, current-to-voltage converters, instrumentation stages, and active filters. The LM358PSR therefore belongs to the broader hierarchy of analog ICs, amplifiers, voltage amplifiers, and general-purpose operational amplifiers.
The principal feature of the LM358PSR is its dual-circuit integration. Two amplifiers in one package can simplify dual-channel signal conditioning, balanced sensing, feedback control, and audio or industrial analog interfaces. Its 8-SO package supports conventional surface-mount PCB assembly rather than through-hole insertion. Each amplifier requires suitable input and feedback components, and the circuit must remain within the voltage, current, temperature, and common-mode limits specified by the manufacturer datasheet.
The LM358 family is widely encountered in general-purpose analog designs because one device can implement multiple common analog functions. Typical uses include amplifying sensor outputs, buffering inputs to analog-to-digital converters, driving slow-changing signals, forming difference-amplifier stages, and building active filtering or gain-control blocks. A dual package can reduce the number of IC footprints compared with two separate single amplifiers.
Because the two circuits share one package, their power-supply connections, operating limits, thermal environment, and layout requirements are linked. Designers should place bypass capacitors near the supply pins, route sensitive input and feedback paths away from noisy switching nodes, and confirm that the amplifier remains stable with the selected output-load and feedback network. The manufacturer datasheet should guide the final supply, resistor, capacitor, and layout selections.
This page brings together the LM358PSR package identity, commercially relevant sourcing questions, verified drop-in candidates, comparison points, and practical PCB guidance. It is intended to help engineers identify whether the dual 8-SO amplifier fits a board before finalizing component documentation, footprint checks, and prototype assembly.
直接替换替代料: LM358PSR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM358PSR (相同外形与封装尺寸) ——差异在于 Package, Amplifier Type, Common-Mode Input Range, Input Offset Voltage, Number of Amplifier Channels.
LM358PSR-JF
✅ 直接替换📋 参考替代料(不在目录中)
LM358DR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM358DRG3
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM358DG
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →RC4558PSR
✅ 直接替换📋 参考替代料(不在目录中)
LM358PSR 最大额定值与电气特性
| Amplifier Type | General-purpose dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| 封装 | 8-SO |
| 安装类型 | Surface mount |
LM358PSR 8-so 引脚配置指南
LM358PSR(8-so 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LM358PSR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM358PSR 适用于 6 应用s: Industrial Sensor Signal Conditioning, Dual-Channel Audio Preamplifier, Power Supply Feedback Control, Analog-to-Digital Converter Input Buffer, Active Filter and Equalization Network, Battery and Portable Monitoring.
Industrial Sensor Signal Conditioning
LM358PSR fits dual-channel industrial sensor conditioning because it combines two general-purpose amplifier circuits in one 8-SO package. Each channel can amplify or buffer a sensor signal before conversion, while the shared package reduces the number of amplifier footprints on the controller board. The design should use the amplifier with negative feedback and verify that the sensor output remains inside the input common-mode range under the full power-supply tolerance. Decoupling capacitors should be placed near the package supply pins, and sensitive input traces should remain away from motors, relays, and switching converters. Final bandwidth, slew-rate, offset, and output-swing checks must use the worst-case operating conditions.
推荐
Dual-Channel Audio Preamplifier
LM358PSR can support two low-level audio preamplifier channels when its noise, bandwidth, slew-rate, output-swing, and common-mode specifications satisfy the signal path. One amplifier channel may handle the left signal and the other the right signal, providing independent gain and filtering stages in a single 8-SO footprint. The feedback resistors and compensation network should be selected from the manufacturer’s recommended configurations. Keep input and feedback traces short, maintain a quiet ground reference, and avoid routing them beneath digital switching nodes. Output loading and distortion requirements should be verified with the selected speaker or line-input network before production release.
推荐
Power Supply Feedback Control
LM358PSR is applicable to slow-loop power-supply feedback and error-amplifier functions where two independent amplifier channels are useful. One channel may compare a scaled output-voltage sample against a reference, while the other amplifies a current-sense or compensation signal. The 8-SO package allows both functions to share a compact footprint without requiring two separate amplifier packages. Designers must verify loop stability, common-mode range, output drive, and the operating limits required by the power stage. Keep the feedback-divider and compensation nodes away from switching nodes, and use short ground returns to prevent high-current output paths from modulating the error signal.
推荐
Analog-to-Digital Converter Input Buffer
LM358PSR can provide two buffered or amplified outputs for an analog-to-digital converter input stage. The dual arrangement is useful when two sensors must be conditioned before digitization, and the 8-SO package leaves more board area than two individual single-amplifier packages. Check that the LM358PSR output swing and settling behavior satisfy the converter’s acquisition requirements, including the converter’s input range and sampling rate. Place the amplifier close to the converter input where practical, route the output as a short low-impedance path, and avoid shared copper paths carrying switching current. The bypass network should be placed close to the amplifier supply pins.
推荐
Active Filter and Equalization Network
LM358PSR can implement two active-filter or equalization stages in an 8-SO package when its bandwidth, slew rate, and output capability suit the selected network. The dual channels can be cascaded for a higher-order response or used independently for separate signal paths. Resistor and capacitor tolerances determine the achievable cutoff and gain accuracy, so use appropriately graded components and include the amplifier’s finite gain and bandwidth when calculating response. Keep the two channels’ layouts symmetrical when matching is important, maintain short feedback paths, and avoid placing sensitive filter nodes next to switching-power components.
推荐
Battery and Portable Monitoring
LM358PSR can monitor two low-voltage signals in a portable or battery-powered system, such as a cell voltage and a temperature-sensor output, using one 8-SO package. The two channels can provide gain or buffering before the signals reach a monitoring controller. Because battery systems experience wide supply variation, verify the amplifier’s supply and common-mode limits across the complete battery discharge profile and confirm that the output swing remains useful at the lowest supply voltage. Keep quiescent-current requirements compatible with the target operating time, use local supply bypassing, and route high-current charging paths away from the analog measurement traces.
推荐
推荐产品汇总
工程参考数据: LM358PSR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM358PSR-JF | LM358DR | LM358DRG | LM358DG | RC4558PSR |
|---|---|---|---|---|---|---|
| Package | 8-SO | 8-SO | 8-SO | 8-SO | 8-SO | 8-SO |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Special Ordering Feature | PSR suffix | JF suffix | DR suffix | DRG suffix | DG suffix | PSR suffix |
关键差异点
- Two amplifier circuits in one 8-SO package (对比 LM358DR)
- Direct family-ordering option for the established 8-SO footprint (对比 RC4558PSR)
- Documented Texas Instruments ordering route (对比 LM358PSR-JF)
设计说明
Place the LM358PSR bypass capacitors directly beside the package supply and ground pins, with the shortest practical return path. Keep both amplifier input nodes, output nodes, and feedback components away from switching inductors, high-current motor returns, and digital clock lines. Because the two channels share one package, their supply reference is common; separating sensitive input grounds from power-current paths can reduce channel-to-channel coupling and improve the behavior of the complete analog board.
Do not treat the 8-SO pinout as interchangeable with every LM358 package option. The DIP, single SOIC, dual SOIC, and other family configurations can use different pin assignments or package drawings. Before layout release, compare the LM358PSR pin-description table and mechanical drawing with the PCB library. Also confirm that each channel’s output does not exceed its load and that the input signal remains within the common-mode operating range throughout startup and shutdown.
Use short feedback paths and place feedback resistors and compensation capacitors close to the relevant amplifier pins. Avoid creating long copper loops around high-impedance inputs, where capacitance can change stability or introduce coupling. For dual-channel designs requiring channel matching, use symmetrical resistor networks, matched capacitor types, and similar routing geometry. Validate the completed design with the intended source impedance, output load, supply variation, and expected temperature range.
Both amplifier channels dissipate power from the package supply and can contribute to the same junction-temperature rise. Estimate worst-case dissipation using the actual output swing, load current, quiescent current, and supply voltage, then compare the resulting junction temperature with the manufacturer limit. The 8-SO package benefits from a small, uninterrupted ground-copper region and normal PCB thermal coupling, but no external heat sink should be assumed without completing the thermal calculation.
合规信息
The LM358PSR catalog information identifies the part and package but does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before marking the assembled product.