LM358PSR - Dual Op Amp, 8-SO | Texas Instruments
MPN: LM358PSR ✓ NakahandaLM358PSR Ulas
An operational amplifier is an analog integrated circuit that compares two input voltages and produces an output voltage determined by external feedback components. When configured with negative feedback, the closed-loop gain is established primarily by external resistors. Operational amplifiers can also be used as voltage buffers, comparators, current-to-voltage converters, instrumentation stages, and active filters. The LM358PSR therefore belongs to the broader hierarchy of analog ICs, amplifiers, voltage amplifiers, and general-purpose operational amplifiers.
The principal feature of the LM358PSR is its dual-circuit integration. Two amplifiers in one package can simplify dual-channel signal conditioning, balanced sensing, feedback control, and audio or industrial analog interfaces. Its 8-SO package supports conventional surface-mount PCB assembly rather than through-hole insertion. Each amplifier requires suitable input and feedback components, and the circuit must remain within the voltage, current, temperature, and common-mode limits specified by the manufacturer datasheet.
The LM358 family is widely encountered in general-purpose analog designs because one device can implement multiple common analog functions. Typical uses include amplifying sensor outputs, buffering inputs to analog-to-digital converters, driving slow-changing signals, forming difference-amplifier stages, and building active filtering or gain-control blocks. A dual package can reduce the number of IC footprints compared with two separate single amplifiers.
Because the two circuits share one package, their power-supply connections, operating limits, thermal environment, and layout requirements are linked. Designers should place bypass capacitors near the supply pins, route sensitive input and feedback paths away from noisy switching nodes, and confirm that the amplifier remains stable with the selected output-load and feedback network. The manufacturer datasheet should guide the final supply, resistor, capacitor, and layout selections.
This page brings together the LM358PSR package identity, commercially relevant sourcing questions, verified drop-in candidates, comparison points, and practical PCB guidance. It is intended to help engineers identify whether the dual 8-SO amplifier fits a board before finalizing component documentation, footprint checks, and prototype assembly.
Mga alternatibo na pwedeng ilagay na LM358PSR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM358PSR (parehas na form factor at footprint) — pagkakaiba sa Package, Amplifier Type, Common-Mode Input Range, Input Offset Voltage, Number of Amplifier Channels.
LM358PSR-JF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM358DR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →LM358DRG3
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →LM358DG
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →RC4558PSR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM358PSR Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | General-purpose dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| Packhaging | 8-SO |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng LM358PSR 8-so
Pin configuration para sa LM358PSR (8-so package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM358PSR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM358PSR ay nararapat para sa 6 aplikasyons: Industrial Sensor Signal Conditioning, Dual-Channel Audio Preamplifier, Power Supply Feedback Control, Analog-to-Digital Converter Input Buffer, Active Filter and Equalization Network, Battery and Portable Monitoring.
Industrial Sensor Signal Conditioning
LM358PSR fits dual-channel industrial sensor conditioning because it combines two general-purpose amplifier circuits in one 8-SO package. Each channel can amplify or buffer a sensor signal before conversion, while the shared package reduces the number of amplifier footprints on the controller board. The design should use the amplifier with negative feedback and verify that the sensor output remains inside the input common-mode range under the full power-supply tolerance. Decoupling capacitors should be placed near the package supply pins, and sensitive input traces should remain away from motors, relays, and switching converters. Final bandwidth, slew-rate, offset, and output-swing checks must use the worst-case operating conditions.
Inirekomenda
Dual-Channel Audio Preamplifier
LM358PSR can support two low-level audio preamplifier channels when its noise, bandwidth, slew-rate, output-swing, and common-mode specifications satisfy the signal path. One amplifier channel may handle the left signal and the other the right signal, providing independent gain and filtering stages in a single 8-SO footprint. The feedback resistors and compensation network should be selected from the manufacturer’s recommended configurations. Keep input and feedback traces short, maintain a quiet ground reference, and avoid routing them beneath digital switching nodes. Output loading and distortion requirements should be verified with the selected speaker or line-input network before production release.
Inirekomenda
Power Supply Feedback Control
LM358PSR is applicable to slow-loop power-supply feedback and error-amplifier functions where two independent amplifier channels are useful. One channel may compare a scaled output-voltage sample against a reference, while the other amplifies a current-sense or compensation signal. The 8-SO package allows both functions to share a compact footprint without requiring two separate amplifier packages. Designers must verify loop stability, common-mode range, output drive, and the operating limits required by the power stage. Keep the feedback-divider and compensation nodes away from switching nodes, and use short ground returns to prevent high-current output paths from modulating the error signal.
Inirekomenda
Analog-to-Digital Converter Input Buffer
LM358PSR can provide two buffered or amplified outputs for an analog-to-digital converter input stage. The dual arrangement is useful when two sensors must be conditioned before digitization, and the 8-SO package leaves more board area than two individual single-amplifier packages. Check that the LM358PSR output swing and settling behavior satisfy the converter’s acquisition requirements, including the converter’s input range and sampling rate. Place the amplifier close to the converter input where practical, route the output as a short low-impedance path, and avoid shared copper paths carrying switching current. The bypass network should be placed close to the amplifier supply pins.
Inirekomenda
Active Filter and Equalization Network
LM358PSR can implement two active-filter or equalization stages in an 8-SO package when its bandwidth, slew rate, and output capability suit the selected network. The dual channels can be cascaded for a higher-order response or used independently for separate signal paths. Resistor and capacitor tolerances determine the achievable cutoff and gain accuracy, so use appropriately graded components and include the amplifier’s finite gain and bandwidth when calculating response. Keep the two channels’ layouts symmetrical when matching is important, maintain short feedback paths, and avoid placing sensitive filter nodes next to switching-power components.
Inirekomenda
Battery and Portable Monitoring
LM358PSR can monitor two low-voltage signals in a portable or battery-powered system, such as a cell voltage and a temperature-sensor output, using one 8-SO package. The two channels can provide gain or buffering before the signals reach a monitoring controller. Because battery systems experience wide supply variation, verify the amplifier’s supply and common-mode limits across the complete battery discharge profile and confirm that the output swing remains useful at the lowest supply voltage. Keep quiescent-current requirements compatible with the target operating time, use local supply bypassing, and route high-current charging paths away from the analog measurement traces.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM358PSR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM358PSR-JF | LM358DR | LM358DRG | LM358DG | RC4558PSR |
|---|---|---|---|---|---|---|
| Package | 8-SO | 8-SO | 8-SO | 8-SO | 8-SO | 8-SO |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Special Ordering Feature | PSR suffix | JF suffix | DR suffix | DRG suffix | DG suffix | PSR suffix |
Pangunahing mga Pagkakaiba
- Two amplifier circuits in one 8-SO package (kumpara saLM358DR)
- Direct family-ordering option for the established 8-SO footprint (kumpara saRC4558PSR)
- Documented Texas Instruments ordering route (kumpara saLM358PSR-JF)
Talaan ng Disenyo
Place the LM358PSR bypass capacitors directly beside the package supply and ground pins, with the shortest practical return path. Keep both amplifier input nodes, output nodes, and feedback components away from switching inductors, high-current motor returns, and digital clock lines. Because the two channels share one package, their supply reference is common; separating sensitive input grounds from power-current paths can reduce channel-to-channel coupling and improve the behavior of the complete analog board.
Do not treat the 8-SO pinout as interchangeable with every LM358 package option. The DIP, single SOIC, dual SOIC, and other family configurations can use different pin assignments or package drawings. Before layout release, compare the LM358PSR pin-description table and mechanical drawing with the PCB library. Also confirm that each channel’s output does not exceed its load and that the input signal remains within the common-mode operating range throughout startup and shutdown.
Use short feedback paths and place feedback resistors and compensation capacitors close to the relevant amplifier pins. Avoid creating long copper loops around high-impedance inputs, where capacitance can change stability or introduce coupling. For dual-channel designs requiring channel matching, use symmetrical resistor networks, matched capacitor types, and similar routing geometry. Validate the completed design with the intended source impedance, output load, supply variation, and expected temperature range.
Both amplifier channels dissipate power from the package supply and can contribute to the same junction-temperature rise. Estimate worst-case dissipation using the actual output swing, load current, quiescent current, and supply voltage, then compare the resulting junction temperature with the manufacturer limit. The 8-SO package benefits from a small, uninterrupted ground-copper region and normal PCB thermal coupling, but no external heat sink should be assumed without completing the thermal calculation.
Impormasyon ng Pagsunod sa Kautusan
The LM358PSR catalog information identifies the part and package but does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before marking the assembled product.