Texas Instruments

LM358PSR - Dual Op Amp, 8-SO | Texas Instruments

MPN: LM358PSR ✓ فعال
8-SO Package
حداقل سفارش: 1 |

LM358PSR نمای کلی

Texas Instruments LM358PSR is a standard, general-purpose dual operational amplifier packaged in an 8-SO surface-mount package. The device contains two amplifier circuits in one package, allowing designers to implement two independent analog signal-processing channels while reducing board area and component count. The LM358PSR designation identifies the Texas Instruments member of the widely used LM358 dual-operational-amplifier family.

An operational amplifier is an analog integrated circuit that compares two input voltages and produces an output voltage determined by external feedback components. When configured with negative feedback, the closed-loop gain is established primarily by external resistors. Operational amplifiers can also be used as voltage buffers, comparators, current-to-voltage converters, instrumentation stages, and active filters. The LM358PSR therefore belongs to the broader hierarchy of analog ICs, amplifiers, voltage amplifiers, and general-purpose operational amplifiers.

The principal feature of the LM358PSR is its dual-circuit integration. Two amplifiers in one package can simplify dual-channel signal conditioning, balanced sensing, feedback control, and audio or industrial analog interfaces. Its 8-SO package supports conventional surface-mount PCB assembly rather than through-hole insertion. Each amplifier requires suitable input and feedback components, and the circuit must remain within the voltage, current, temperature, and common-mode limits specified by the manufacturer datasheet.

The LM358 family is widely encountered in general-purpose analog designs because one device can implement multiple common analog functions. Typical uses include amplifying sensor outputs, buffering inputs to analog-to-digital converters, driving slow-changing signals, forming difference-amplifier stages, and building active filtering or gain-control blocks. A dual package can reduce the number of IC footprints compared with two separate single amplifiers.

Because the two circuits share one package, their power-supply connections, operating limits, thermal environment, and layout requirements are linked. Designers should place bypass capacitors near the supply pins, route sensitive input and feedback paths away from noisy switching nodes, and confirm that the amplifier remains stable with the selected output-load and feedback network. The manufacturer datasheet should guide the final supply, resistor, capacitor, and layout selections.

This page brings together the LM358PSR package identity, commercially relevant sourcing questions, verified drop-in candidates, comparison points, and practical PCB guidance. It is intended to help engineers identify whether the dual 8-SO amplifier fits a board before finalizing component documentation, footprint checks, and prototype assembly.

جایگزین‌های drop-in برای LM358PSR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM358PSR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Amplifier Type, Common-Mode Input Range, Input Offset Voltage, Number of Amplifier Channels.

onsemi
Package: 8-SOIC
Input Offset Voltage: 7 mV
Number of Amplifier Channels: 2 channels
مقایسه با LM358PSR →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: General Purpose Operational Amplifier
Common-Mode Input Range: Extends to ground (V-)
مقایسه با LM358PSR →
Texas Instruments
Package: 8-pin SOIC
Common-Mode Input Range: Includes ground
Number of Amplifier Channels: 2 circuits
مقایسه با LM358PSR →

LM358PSR-JF

✅ جایگزین مستقیم
📦 8-SO
Same 2-circuit, 8-SO arrangement; the JF ordering suffix has 0 confirmed electrical-performance difference, while its grade and qualification fields require verification.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM358DR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 8-SO
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM358DRG3

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 8-SO
Dual operational amplifier · 2 circuits · 3 V to 36 V · 300 uA per channel · 1.2 MHz · Includes ground · 8-pin SOIC · Surface mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM358DG

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
onsemi
📦 8-SO
2 channels · Dual operational amplifier · 1 MHz · 0.6 V/µs · 3 V to 32 V · 65 dB · 7 mV · Extends to ground/VEE

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

RC4558PSR

✅ جایگزین مستقیم
📦 8-SO
Documented LM358 comparison candidate in the same 8-SO configuration; individual voltage, current, bandwidth, and offset differences require manufacturer-table verification.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM358PSR حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General-purpose dual operational amplifier
Number of Amplifier Circuits 2 circuits
بسته‌بندی 8-SO
نوع نصب Surface mount

راهنمای پیکربندی پین LM358PSR 8-so

پیکربندی پین برای LM358PSR (پکیج 8-so). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-so برای LM358PSR

داده پین‌آوت تفصیلی موجود نیست برای LM358PSR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM358PSR مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Dual-Channel Audio Preamplifier, Power Supply Feedback Control, Analog-to-Digital Converter Input Buffer, Active Filter and Equalization Network, Battery and Portable Monitoring.

🏭

Industrial Sensor Signal Conditioning

LM358PSR fits dual-channel industrial sensor conditioning because it combines two general-purpose amplifier circuits in one 8-SO package. Each channel can amplify or buffer a sensor signal before conversion, while the shared package reduces the number of amplifier footprints on the controller board. The design should use the amplifier with negative feedback and verify that the sensor output remains inside the input common-mode range under the full power-supply tolerance. Decoupling capacitors should be placed near the package supply pins, and sensitive input traces should remain away from motors, relays, and switching converters. Final bandwidth, slew-rate, offset, and output-swing checks must use the worst-case operating conditions.

🎧

Dual-Channel Audio Preamplifier

LM358PSR can support two low-level audio preamplifier channels when its noise, bandwidth, slew-rate, output-swing, and common-mode specifications satisfy the signal path. One amplifier channel may handle the left signal and the other the right signal, providing independent gain and filtering stages in a single 8-SO footprint. The feedback resistors and compensation network should be selected from the manufacturer’s recommended configurations. Keep input and feedback traces short, maintain a quiet ground reference, and avoid routing them beneath digital switching nodes. Output loading and distortion requirements should be verified with the selected speaker or line-input network before production release.

⚡

Power Supply Feedback Control

LM358PSR is applicable to slow-loop power-supply feedback and error-amplifier functions where two independent amplifier channels are useful. One channel may compare a scaled output-voltage sample against a reference, while the other amplifies a current-sense or compensation signal. The 8-SO package allows both functions to share a compact footprint without requiring two separate amplifier packages. Designers must verify loop stability, common-mode range, output drive, and the operating limits required by the power stage. Keep the feedback-divider and compensation nodes away from switching nodes, and use short ground returns to prevent high-current output paths from modulating the error signal.

🖥️

Analog-to-Digital Converter Input Buffer

LM358PSR can provide two buffered or amplified outputs for an analog-to-digital converter input stage. The dual arrangement is useful when two sensors must be conditioned before digitization, and the 8-SO package leaves more board area than two individual single-amplifier packages. Check that the LM358PSR output swing and settling behavior satisfy the converter’s acquisition requirements, including the converter’s input range and sampling rate. Place the amplifier close to the converter input where practical, route the output as a short low-impedance path, and avoid shared copper paths carrying switching current. The bypass network should be placed close to the amplifier supply pins.

📻

Active Filter and Equalization Network

LM358PSR can implement two active-filter or equalization stages in an 8-SO package when its bandwidth, slew rate, and output capability suit the selected network. The dual channels can be cascaded for a higher-order response or used independently for separate signal paths. Resistor and capacitor tolerances determine the achievable cutoff and gain accuracy, so use appropriately graded components and include the amplifier’s finite gain and bandwidth when calculating response. Keep the two channels’ layouts symmetrical when matching is important, maintain short feedback paths, and avoid placing sensitive filter nodes next to switching-power components.

📱

Battery and Portable Monitoring

LM358PSR can monitor two low-voltage signals in a portable or battery-powered system, such as a cell voltage and a temperature-sensor output, using one 8-SO package. The two channels can provide gain or buffering before the signals reach a monitoring controller. Because battery systems experience wide supply variation, verify the amplifier’s supply and common-mode limits across the complete battery discharge profile and confirm that the output swing remains useful at the lowest supply voltage. Keep quiescent-current requirements compatible with the target operating time, use local supply bypassing, and route high-current charging paths away from the analog measurement traces.

Where to buy LM358PSR online?
The LM358PSR can be requested through the Request a Quote form on this page for the exact Texas Instruments MPN and 8-SO package. The part is identified by distributor catalogs as a standard, general-purpose dual operational amplifier with two amplifier circuits in one 8-SO package. Submit the required quantity and shipment destination with the request so packaging, current availability, and delivery can be confirmed for the production build.
What is the price of LM358PSR?
Current pricing for the LM358PSR should be obtained through the Request a Quote form on this page because pricing depends on quantity, package configuration, and order terms. The component is cataloged as the Texas Instruments LM358PSR, a general-purpose dual operational amplifier in an 8-SO package. A quote request ensures that the commercial response applies to the exact MPN rather than a related LM358 family member or a different package suffix.
What is the lead time for LM358PSR?
The current lead time for LM358PSR should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production builds, and inventory position, so a confirmed delivery commitment is preferable to assuming availability from a catalog entry. The exact part number is LM358PSR from Texas Instruments, and the request should state the required quantity and required arrival date.
Is LM358PSR in stock?
Stock status for the exact LM358PSR should be confirmed through the Request a Quote form on this page. The device is identified as a Texas Instruments dual operational amplifier in an 8-SO package, and several distributor catalog pages reference the exact MPN. Because stock can change rapidly, the quote response should be used for the current quantity available rather than treating a catalog listing as a reservation.
What are the key specifications of LM358PSR that engineers should know?
The LM358PSR is a Texas Instruments general-purpose dual operational amplifier with two amplifier circuits in an 8-SO surface-mount package. Its defining commercial and mechanical identifiers are the LM358PSR MPN, dual-circuit configuration, and 8-SO package. Supply voltage, offset voltage, bandwidth, slew rate, common-mode range, output-current capability, and temperature limits should be selected from the manufacturer datasheet before the device is approved for a specific design.
What can replace LM358PSR?
A replacement must use the same 8-SO footprint, preserve the two-amplifier pin arrangement, and remain within the required electrical limits of the original circuit. RC4558PSR is a documented comparison candidate in the LM358 cross-reference material, while LM358 family variants with suitable SO-package order codes may also be considered. Confirm the candidate’s pinout, supply range, common-mode range, output swing, and stability characteristics before approving a substitution.
Is LM358PSR the same as RC4558PSR?
No definitive equivalence can be assumed without checking the RC4558PSR datasheet against the LM358PSR requirements. The cross-reference material identifies RC4558PSR as a comparison candidate for LM358PSR, but pin placement alone does not establish identical voltage ratings, offset, bandwidth, slew rate, output drive, or operating-temperature limits. Review the manufacturer pinout and electrical tables before using RC4558PSR as a drop-in replacement in production.
LM358PSR vs RC4558PSR - which is better for a general-purpose amplifier?
Choose LM358PSR when its Texas Instruments electrical ratings and documented operating limits match the circuit more closely; otherwise RC4558PSR may be preferable if its datasheet provides the required headroom. Both candidates are associated with the LM358 replacement search, but the available comparison does not establish that their gain-bandwidth, slew-rate, input-offset, common-mode, and output-current ratings are identical. The selection should be based on the worst-case application requirements.
What is the difference between LM358PSR and LM358PSR-JF?
LM358PSR-JF is another Texas Instruments ordering variant listed for the same 8-SO dual-operational-amplifier family. The visible catalog information does not expose enough electrical detail to claim that every performance parameter is identical, so the manufacturer ordering table and datasheet should be checked for temperature grade, marking, or qualification differences. Both MPNs must also be confirmed as pin-to-pin compatible with the PCB footprint used in the target design.
When should I choose LM358PSR over another dual op amp?
Choose LM358PSR when the design needs two general-purpose amplifier channels, an established 8-SO footprint, and operation within the Texas Instruments LM358 family’s specified limits. It is suitable for ordinary sensor buffering, slow-changing signal amplification, active filtering, and dual-channel analog conditioning when its voltage, common-mode, bandwidth, slew-rate, and output-current ratings satisfy the circuit. Choose another candidate only when it offers a necessary electrical or qualification advantage.
Is LM358PSR suitable for sensor signal conditioning?
LM358PSR can be suitable for sensor signal conditioning when the sensor output remains within its input common-mode range and the required gain and bandwidth are acceptable. The two internal amplifier circuits allow separate channels for signal amplification and feedback or filtering functions. Confirm the sensor excitation level, offset error, noise requirements, supply voltage, and output-swing limits against the manufacturer datasheet before finalizing the analog path.
Where to download LM358PSR datasheet PDF?
The official LM358PSR datasheet PDF is available from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/lm358.pdf. Use the document’s ordering-information, pin-configuration, recommended-operating-conditions, electrical-characteristics, and application sections to confirm that LM358PSR is the correct 8-SO orderable device. The manufacturer document is the controlling reference for ratings and footprint interpretation.
Where to find LM358PSR pinout?
The LM358PSR pin configuration is shown in the Texas Instruments LM358 datasheet at https://www.ti.com/lit/ds/symlink/lm358.pdf. Use the package pinout and pin-description table when assigning input, output, supply, and ground connections for the 8-SO footprint. Verify the package drawing as well, because the LM358 family includes several order codes with different mechanical formats and the PSR suffix identifies the target configuration.
How should LM358PSR be decoupled and laid out?
Place the required supply-bypass capacitors close to the LM358PSR supply and ground pins, and keep the feedback and sensitive input routes short and away from switching-current paths. Both amplifier channels share the same package power connections, so supply noise can affect both channels. Use the manufacturer application guidance to select capacitor values and grounding arrangements, and inspect the assembled layout for loop area, common-impedance coupling, and accidental output loading.
What is the best Texas Instruments equivalent for LM358PSR?
The closest Texas Instruments candidate is the documented LM358PSR-JF ordering variant, provided its manufacturer ordering information confirms the same electrical function, temperature grade, qualification status, and 8-SO footprint. A suffix change alone does not prove drop-in compatibility. Review the pin description, electrical characteristics, and package drawing, then verify that supply range, common-mode input range, output swing, bandwidth, slew rate, and stability requirements remain satisfied.

داده‌های مرجع مهندسی برای LM358PSR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM358PSR when the board needs two general-purpose amplifier channels, uses an 8-SO footprint, and operates within the Texas Instruments LM358 family’s specified supply, common-mode, bandwidth, slew-rate, output, and temperature limits. LM358PSR-JF is the closest documented Texas Instruments ordering candidate, but its grade and qualification fields should be checked before substitution. LM358DR, LM358DRG, and LM358DG provide additional same-family ordering options with the same 8-SO form factor; confirm the exact suffix in the manufacturer ordering table. Consider RC4558PSR when its datasheet demonstrates better fit for the required voltage, offset, bandwidth, slew-rate, output-drive, or temperature conditions. None of these candidates should be approved solely because the package is identical: verify the complete pin description and worst-case electrical limits, then review decoupling and feedback-component recommendations before releasing a replacement to production.

مقایسه با جایگزین‌ها

پارامتر این محصول LM358PSR-JF LM358DR LM358DRG LM358DG RC4558PSR
Package 8-SO 8-SO 8-SO 8-SO 8-SO 8-SO
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Special Ordering Feature PSR suffix JF suffix DR suffix DRG suffix DG suffix PSR suffix

تفاوت‌های کلیدی

  • Two amplifier circuits in one 8-SO package (در مقابلLM358DR)
  • Direct family-ordering option for the established 8-SO footprint (در مقابلRC4558PSR)
  • Documented Texas Instruments ordering route (در مقابلLM358PSR-JF)

یادداشت‌های طراحی

Place the LM358PSR bypass capacitors directly beside the package supply and ground pins, with the shortest practical return path. Keep both amplifier input nodes, output nodes, and feedback components away from switching inductors, high-current motor returns, and digital clock lines. Because the two channels share one package, their supply reference is common; separating sensitive input grounds from power-current paths can reduce channel-to-channel coupling and improve the behavior of the complete analog board.

Do not treat the 8-SO pinout as interchangeable with every LM358 package option. The DIP, single SOIC, dual SOIC, and other family configurations can use different pin assignments or package drawings. Before layout release, compare the LM358PSR pin-description table and mechanical drawing with the PCB library. Also confirm that each channel’s output does not exceed its load and that the input signal remains within the common-mode operating range throughout startup and shutdown.

Use short feedback paths and place feedback resistors and compensation capacitors close to the relevant amplifier pins. Avoid creating long copper loops around high-impedance inputs, where capacitance can change stability or introduce coupling. For dual-channel designs requiring channel matching, use symmetrical resistor networks, matched capacitor types, and similar routing geometry. Validate the completed design with the intended source impedance, output load, supply variation, and expected temperature range.

Both amplifier channels dissipate power from the package supply and can contribute to the same junction-temperature rise. Estimate worst-case dissipation using the actual output swing, load current, quiescent current, and supply voltage, then compare the resulting junction temperature with the manufacturer limit. The 8-SO package benefits from a small, uninterrupted ground-copper region and normal PCB thermal coupling, but no external heat sink should be assumed without completing the thermal calculation.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LM358PSR catalog information identifies the part and package but does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before marking the assembled product.

تاریخ تأیید داده‌ها: 2026-11-13 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM358PSR datasheet LM358PSR datasheet pdf LM358PSR pinout LM358PSR 8-SO footprint LM358PSR equivalent LM358PSR replacement LM358PSR cross reference LM358PSR vs RC4558PSR Texas Instruments LM358PSR LM358PSR price LM358PSR stock LM358PSR dual op amp application

قطعات و اصطلاحات مرتبط

Texas Instruments LM358PSR LM358PSR-JF LM358DR LM358DRG LM358DG RC4558PSR LM358 dual operational amplifier operational amplifier analog integrated circuit voltage amplifier signal conditioning active filter sensor amplification 8-SO SOIC family surface-mount package SMD negative feedback input common-mode voltage output voltage swing gain bandwidth product slew rate power-supply bypass capacitor
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ