Analog Devices

LT1211IS8 - Dual 14MHz Precision Op Amp | Analog Devices

料号: LT1211IS8 ✓ 量产中
Single supply Vdss 8-lead SOIC Package
最小起订量: 1 |

LT1211IS8 概述

The Analog Devices LT1211IS8 is a dual, single-supply precision operational amplifier featuring a 14MHz gain-bandwidth product, a 7V/us slew rate, and an 8-lead small-outline IC package. The LT1211 family is designed for applications requiring both DC precision and comparatively high-frequency amplification. Its two amplifiers are independently usable, allowing one package to provide signal conditioning for two related analog channels.

An operational amplifier is an analog amplifier whose behavior depends mainly on external feedback components. A precision operational amplifier adds low offset, low bias-current, and stable DC characteristics, while a gain-bandwidth product specifies the approximate frequency range over which closed-loop gain and phase performance can be maintained. The LT1211 belongs to the operational-amplifier hierarchy within analog and linear semiconductor devices.

The LT1211 combines a 14MHz gain-bandwidth product with a 7V/us slew rate. These characteristics make it relevant to low-level signal conditioning, active filtering, instrumentation, and feedback loops that require faster dynamic response than a conventional low-frequency precision amplifier. The manufacturer identifies LT1212 as the quad version of the same amplifier family, allowing family-level design planning without changing the core amplifier architecture.

The LT1211IS8 is specified for single-supply operation. Single-supply operation simplifies circuit design when the source signal lies near the lower supply rail, although the usable common-mode range, output swing, and biasing requirements remain important design constraints. Designers should use the manufacturer's pin-description table and electrical-characteristics tables when assigning input, output, power, and compensation connections.

Typical circuit roles include precision signal amplification, active filtering, sensor-signal conditioning, feedback amplification, and low-level analog processing. Its 14MHz bandwidth can be especially useful when filtering or feedback behavior must remain effective above audio-band frequencies, while the 7V/us slew rate helps preserve large-signal response when operating at higher frequencies.

For implementation, preserve the manufacturer's recommended bypass and feedback-component choices, account for input and output voltage limits, and evaluate stability with the intended source impedance and load. Because an 8-lead SOIC has limited routing area, decoupling capacitors should be placed close to the power pins and sensitive input routes should be kept away from high-current switching nodes.

This product page organizes the key operating characteristics, package considerations, application guidance, comparison fields, and replacement criteria for the LT1211IS8. It is intended to help engineers distinguish true pin-compatible substitutions from merely similar dual amplifiers and to evaluate the part against the specific bandwidth, slew-rate, supply, and package requirements of an analog signal chain.

直接替换替代料: LT1211IS8 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

LT1211IS8#PBF

✅ 直接替换
📦 8-lead SOIC
Same 14MHz gain-bandwidth product and 7V/us slew rate; the orderable suffix changes the terminal-finish designation.

📋 参考替代料(不在目录中)

LT1211CS8#PBF

✅ 直接替换
📦 8-lead SOIC
Same 14MHz gain-bandwidth product and 7V/us slew rate in the same 8-SO footprint; commercial and industrial temperature grading differ.

📋 参考替代料(不在目录中)

LT1211IS8 最大额定值与电气特性

Amplifier Type Precision operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 14 MHz
Slew Rate 7 V/us
Supply Type Single supply
Circuit Type General-purpose amplifier
Package Type 8-lead SOIC
Manufacturer Analog Devices Inc.

LT1211IS8 8-lead soic 引脚配置指南

LT1211IS8(8-lead soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LT1211IS8 的 8-lead soic 封装引脚图

暂无详细引脚数据: LT1211IS8.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LT1211IS8 适用于 6 应用s: Precision Active Filtering, Industrial Sensor Signal Conditioning, Instrumentation and Feedback Control, Audio and Communications Interface, Portable Measurement Devices, Data Acquisition Front End.

🔧

Precision Active Filtering

The LT1211IS8 fits active-filter stages that require precision DC behavior while retaining useful high-frequency response. Its 14MHz gain-bandwidth product allows closed-loop amplification well above the audio range, and the 7V/us slew rate helps the output follow larger signal transitions. Two independent amplifiers in the package can implement a second-order filter section or a related signal-conditioning stage. Component selection must account for the required noise gain, phase margin, operating frequency, and output load. The 8-lead SOIC also supports conventional surface-mount assembly, although care is needed to maintain short feedback paths and keep sensitive input nodes away from switching circuitry.

🏭

Industrial Sensor Signal Conditioning

The LT1211IS8 can amplify low-level industrial sensor signals where both DC precision and a 14MHz gain-bandwidth product are useful. The dual layout allows two amplifier channels to support complementary conditioning paths, such as a sensor signal and its reference or a differential stage followed by an output driver. Its 7V/us slew rate provides useful dynamic margin for signals that are not strictly DC. The circuit must remain within the LT1211IS8 input common-mode and output-swing limits, particularly when operating from a single supply. Apply input filtering and shielding according to the sensor environment, and route high-current or switching nodes away from high-impedance amplifier inputs to minimize induced errors.

⚡

Instrumentation and Feedback Control

The LT1211IS8 is suitable for instrumentation amplifiers, feedback networks, and closed-loop analog controls where a conventional slow precision amplifier could limit loop dynamics. Its 14MHz gain-bandwidth product supports a broader operating band than a typical low-frequency precision op amp, while the 7V/us slew rate supports cleaner large-signal response. Two channels can implement error amplification and feedback buffering within one package. Designers should verify noise gain, stability, output-current capability, and common-mode behavior under the intended operating conditions. Keep the summing-node components close to the amplifier inputs and provide a direct, low-impedance ground return to reduce parasitic feedback and coupling.

🌐

Audio and Communications Interface

The LT1211IS8 can condition line-level or low-level communications signals where the 14MHz bandwidth provides margin above the audio band. The 7V/us slew rate is useful when the amplifier must reproduce moderate-amplitude transitions without excessive slew distortion. A dual package can handle two related channels or separate transmit and receive paths. Audio performance still depends on the complete signal path: input impedance, noise, distortion, output loading, and the selected gain structure remain as important as bandwidth. Use short traces for high-impedance inputs, maintain a stable reference for single-supply biasing, and keep the feedback network physically compact to minimize parasitic capacitance that could alter loop stability.

📱

Portable Measurement Devices

The LT1211IS8 supports portable measurement systems that combine a single-supply architecture with the need for accurate signal amplification. Its single-supply operation simplifies power architecture, while the 14MHz gain-bandwidth product avoids the bandwidth limitations of many low-power precision amplifiers. The two channels can process a measurement input and a buffered reference or drive two acquisition channels. Battery-powered designs must still account for supply voltage, output swing, quiescent behavior, and the external component set. Avoid using the amplifier beyond its specified common-mode range, and provide local bypass capacitance with a short return path. If source impedance is high, account for bias-current errors and parasitic capacitance in the compensation network.

🖥️

Data Acquisition Front End

The LT1211IS8 is appropriate for the analog front end of a data-acquisition system requiring more bandwidth than a slow general-purpose precision amplifier. Its 14MHz gain-bandwidth product supports signal conditioning above the baseband, and the 7V/us slew rate improves large-signal handling. Two channels can amplify a differential pair or condition two inputs before conversion. The design must ensure that amplifier input and output ranges align with the source and converter, and that settling behavior meets the required acquisition rate. Keep the input path short, place compensation and gain-setting components close to the device, and isolate the analog section from switching converter and digital clock routing to reduce conversion errors.

What is the LT1211IS8?
The LT1211IS8 is a dual, single-supply precision operational amplifier from Analog Devices, packaged in an 8-lead SOIC. According to the Analog Devices LT1211 product page, it provides a 14MHz gain-bandwidth product and a 7V/us slew rate. The dual configuration provides two amplifiers in one package, while the LT1212 family member offers four channels.
What are the key specifications of LT1211IS8 that engineers should know?
The LT1211IS8 combines two precision operational-amplifier channels, single-supply operation, a 14MHz gain-bandwidth product, and a 7V/us slew rate in an 8-lead SOIC. According to the Analog Devices LT1211 product information, these dynamic specifications allow the device to serve as a general-purpose precision amplifier in signal-conditioning and feedback circuits. Use the datasheet for exact offset, bias-current, supply, and common-mode limits.
What is the gain-bandwidth product of LT1211IS8?
The LT1211IS8 has a 14MHz gain-bandwidth product. According to the Analog Devices LT1211 product page, this specification supports amplification well beyond the audio band and makes the device suitable for active filters, feedback loops, and instrumentation requiring a balance of precision and bandwidth. The achievable closed-loop bandwidth also depends on the selected feedback network and noise-gain configuration.
What is the slew rate of LT1211IS8?
The LT1211IS8 has a 7V/us slew rate. According to the Analog Devices LT1211 product page, this controls how quickly the output can move under large-signal conditions. The figure is particularly relevant in active filters, waveform-conditioning circuits, and feedback applications where output movement must follow the input without excessive distortion.
Where can I download the LT1211IS8 datasheet PDF?
The official LT1211 datasheet and product information are available through the Analog Devices LT1211 product page at https://www.analog.com/en/products/lt1211.html. Follow the datasheet link on that page to obtain the manufacturer document. Use the pin-description and electrical-characteristics sections to confirm supply limits, input and output ranges, compensation, and package details.
Where can I find the LT1211IS8 pinout?
The LT1211IS8 pinout is defined by the Analog Devices manufacturer datasheet for the LT1211 family. Use the pin-description table and package drawing in that document to assign pins for the two amplifiers and their supply connections. The verified part listing identifies an 8-SO package, but it does not reproduce individual terminal names, so consult the manufacturer document before laying out a PCB.
Is the LT1211IS8 suitable for single-supply analog systems?
Yes, the LT1211IS8 is specified as a single-supply precision operational amplifier. According to the Analog Devices LT1211 product page, it is intended for systems where DC precision must be combined with higher-frequency performance. The usable signal range still depends on the exact supply voltage, input common-mode limits, output swing, and the selected biasing arrangement.
LT1211IS8 vs LT1211IS8#PBF - what is the difference?
LT1211IS8#PBF is the lead-free ordering designation associated with the same LT1211IS8 amplifier and 8-SO package. The manufacturer product family remains the same, and the core 14MHz gain-bandwidth product and 7V/us slew rate identify the underlying amplifier. For new production, confirm the required terminal-finish code, marking, packaging configuration, and assembly requirements against the manufacturer ordering information.
When should I choose LT1211IS8 over a slower dual op amp?
Choose the LT1211IS8 when the signal path needs more than low-frequency precision amplification, particularly when closed-loop bandwidth or slew behavior matters. Its 14MHz gain-bandwidth product and 7V/us slew rate provide more dynamic performance than a conventional low-bandwidth dual amplifier. The selection should still be based on noise, offset, bias current, supply range, and stability requirements.
When should I choose LT1211IS8 over a dual rail-to-rail op amp?
Choose the LT1211IS8 when precision, bandwidth, and slew rate are more important than selecting solely by input or output rail-to-rail capability. Its 14MHz gain-bandwidth product and 7V/us slew rate suit wider-band signal conditioning, while single-supply operation supports compact analog systems. Confirm the common-mode and output-swing requirements before finalizing the design.
What can replace the LT1211IS8?
The closest identified replacement is LT1211IS8#PBF because it retains the LT1211IS8 amplifier identity, 8-SO package, 14MHz gain-bandwidth product, and 7V/us slew rate. Other options must be checked for exact pinout, supply range, offset, bias current, stability, and temperature grade. A similar amplifier function alone is not sufficient to establish drop-in compatibility.
Is the LT1211IS8 the same as the LT1211IS8#PBF?
The LT1211IS8 and LT1211IS8#PBF identify the same core LT1211 dual-amplifier configuration in the 8-SO package, but the suffix can specify a different finish or orderable configuration. Both are associated with a 14MHz gain-bandwidth product and 7V/us slew rate. Confirm the physical marking and production requirements in the manufacturer ordering guide before substitution.
Where to buy LT1211IS8 online?
Use the Request a Quote form on this page to request LT1211IS8 availability, lead time, and an order quotation. The request should identify the exact MPN, LT1211IS8, and the required quantity. The manufacturer product page is also the appropriate source for technical documentation and ordering-code clarification before procurement.
What is the price of LT1211IS8?
The current commercial terms for LT1211IS8 are obtained through the Request a Quote form on this page. Submit the exact MPN, quantity, target package configuration, and delivery requirements to receive a current quotation. This approach avoids presenting a stale unit price that may not match the requested production quantity or packaging.
What is the lead time and stock status for LT1211IS8?
Current stock and lead time for LT1211IS8 should be confirmed through the Request a Quote form on this page. Include the exact MPN, annual and prototype quantities, required shipment date, and packaging preference. The quote response provides the procurement decision data needed for schedule and BOM planning.

工程参考数据: LT1211IS8 ——对比、设计指导和合规信息。

选型指南

Choose LT1211IS8 when the design needs a dual precision amplifier with a 14MHz gain-bandwidth product, 7V/us slew rate, single-supply operation, and an 8-lead SOIC footprint. Choose LT1211IS8#PBF when that same core amplifier configuration and lead-free ordering designation fit the production requirements. Choose LT1211CS8#PBF only when the commercial temperature grade is acceptable and its family parameters meet the circuit needs. For designs requiring more channels, MC3403DR offers four amplifiers but requires a different package and PCB layout. LM2904PWR may be acceptable for slower, lower-bandwidth signal paths, but it should not replace the LT1211IS8 when the 14MHz bandwidth or 7V/us slew rate is essential. In every case, verify the manufacturer pinout, supply range, common-mode limits, offset, bias current, stability, and temperature grade before releasing a substitution.

与替代料对比

参数 本产品 LT1211IS8#PBF LT1211CS8#PBF
Brand Analog Devices Analog Devices Analog Devices
Package 8-lead SOIC 8-lead SOIC 8-lead SOIC
Number of Channels 2 2 2
Amplifier Type Precision operational amplifier Precision operational amplifier Precision operational amplifier
Gain-Bandwidth Product 14 MHz 14 MHz 14 MHz
Slew Rate 7 V/us 7 V/us 7 V/us
Supply Type Single supply Single supply Single supply
Temperature Grade Industrial Industrial Commercial

关键差异点

  • Combines precision and comparatively high bandwidth (对比 LM2904PWR)
  • Closest ordering alternative retains the core dynamic specifications (对比 LT1211IS8#PBF)
  • Single-supply dual precision amplifier (对比 MC3403DR)

设计说明

Place the power-bypass capacitors directly beside the LT1211IS8 supply pins and connect them to a low-impedance ground plane. Keep the feedback resistors, compensation capacitor, and input components close to the relevant amplifier pins. Short input traces reduce parasitic capacitance and susceptibility to coupled noise, which is important because the 14MHz gain-bandwidth product can respond to interference well above the intended signal bandwidth.

Do not select a replacement based only on dual-channel count and SOIC-8 package. Confirm the pinout, supply limits, input common-mode range, output swing, offset voltage, bias current, stability, and temperature grade. A slow dual amplifier may fit the footprint but fail bandwidth requirements, while a wider-band rail-to-rail device may change biasing or output behavior. LT1211IS8#PBF is the closest identified orderable alternative; LT1211CS8#PBF requires a deliberate commercial-versus-industrial temperature decision.

Evaluate the feedback network against the required noise gain and closed-loop bandwidth rather than assuming full 14MHz operation at every gain. Include source impedance, load capacitance, and external feedback capacitance in the stability analysis. Use a ground plane that remains continuous beneath the device, avoid splitting the return path under the package, and maintain isolation from high-current switching nodes to preserve low-level signal accuracy.

Design the single-supply rail so the input signal, output waveform, and internal operating point remain within the manufacturer limits throughout temperature and tolerance variation. Biasing near the lower rail can reduce usable output swing. Check the output-current requirement separately from slew-rate capability because a 7V/us slew rate does not establish maximum load-current capability. Use stable decoupling and account for regulator noise when the amplifier handles precision signals.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The legacy LT1211IS8 ordering code is distinguished from the lead-free LT1211IS8#PBF designation. No broader compliance conclusion should be inferred for the legacy orderable code without its specific material declaration.

相关搜索

lt1211is8 pbf LT1211IS8 datasheet LT1211IS8 datasheet pdf LT1211IS8 pinout LT1211IS8 specifications LT1211IS8 equivalent LT1211IS8 replacement LT1211IS8 cross reference LT1211IS8 vs LT1211IS8#PBF LT1211IS8 SOIC-8 amplifier LT1211IS8 14MHz op amp LT1211IS8 active filter LT1211IS8 price Analog Devices LT1211IS8

相关元器件 & 术语

Analog Devices Linear Technology LT1211IS8 LT1211IS8#PBF LT1211CS8#PBF LT1211 LT1212 precision operational amplifier dual amplifier single-supply amplifier gain-bandwidth product 14MHz gain-bandwidth product 7V/us slew rate signal conditioning active filter feedback control instrumentation data acquisition SOIC-8 8-lead SOIC surface-mount package analog IC semiconductor common-mode range power supply rejection
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情