M1AFS600-2FGG484 - Fusion FPGA 600K Gates ARM Cortex-M1 | Microchip
料号： M1AFS600-2FGG484 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $249 | $249.00 |
| 10 | $226 | $2,260.00 |
| 100 | $205 | $20,500.00 |
| 500 | $189 | $94,500.00 |
| 1,000 | $175 | $175,000.00 |
M1AFS600-2FGG484 概述
A mixed-signal FPGA is a programmable logic device that integrates digital fabric with analog blocks, flash memory, and clock management circuitry on one die. Unlike SRAM-based FPGAs, flash-based FPGAs such as the Fusion family are non-volatile: configuration data is stored on-chip, so the device is instantly available at power-up and needs no external configuration flash, improving board simplicity and configuration security.
Key features include the ARM Cortex-M1 embedded processor for soft-embedded control workloads, large flash memory blocks for on-chip code and data storage, configurable analog circuitry for mixed-signal monitoring, and comprehensive clock generation and management circuitry. The -2 speed grade and 130nm flash process deliver deterministic, low-power logic implementation suited to system-control and data-acquisition roles.
Technically, the Fusion architecture combines look-up-table based fabric with ProASIC3-style flash switching, giving single-chip, high-security programmable logic. Monolithic integration of analog monitoring, flash memory, and clock conditioning reduces external component count and total system cost compared to discrete FPGA-plus-analog-plus-flash stacks.
Typical applications include industrial automation and motor-system control, embedded processor subsystems where a Cortex-M1 hard core replaces an external MCU, and mixed-signal sensor aggregation boards. The 484-FBGA footprint with 172 I/Os supports moderate-gate-count interface bridging.
Designers should note that 0.5mm-pitch BGA escape routing demands appropriate HDI or standard 6+ layer PCB stackups, and the 1.5V core rail should be regulated separately from I/O banks.
This page synthesizes distributor listings, drop-in same-footprint variants, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： M1AFS600-2FGG484 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： M1AFS600-2FGG484 （相同外形与封装尺寸） ——差异在于 Family, Package, System Gates, RoHS Status, Analog Features.
快速对比工具——选择替代料号进行并排对比：
M1AFS600-FGG484I
✅ 直接替换✓ 有现货
$128.4 / 个
查看数据手册 →M1AFS600-FG484K
✅ 直接替换✓ 有现货
$108.5 / 个
查看数据手册 →M1AFS600-1FGG484I
✅ 直接替换✓ 有现货
$430 / 个
查看数据手册 →M1AFS600-FG484
✅ 直接替换✓ 有现货
$185 / 个
查看数据手册 →M1AFS600-2FG484
✅ 直接替换✓ 有现货
$141.9 / 个
查看数据手册 →M7AFS600-2FGG484
✅ 直接替换✓ 有现货
$210 / 个
查看数据手册 →M1AFS600-2FGG484 最大额定值与电气特性
| Family | Fusion (M1 variant with ARM Cortex-M1) |
| System Gates | 600000 |
| Logic Cells | 13824 |
| User I/O | 172 |
| Embedded Processor | ARM Cortex-M1 hard core |
| Programmable Technology | Flash-based (non-volatile) |
| Process Technology | 130 nm |
| Core Voltage | 1.5 V |
| Speed Grade | -2 |
| 封装 | 484-ball FBGA (FGG484), 23x23x2.44 mm |
| 安装类型 | Surface Mount |
| Analog Features | Configurable analog blocks (mixed-signal FPGA) |
| On-chip Flash Memory | Large flash memory blocks integrated |
| Clock Management | Integrated clock generation and management circuitry |
| RoHS 状态 | Compliant (per Newark: RoHS Compliant: Yes) |
| Packaging | Tray |
M1AFS600-2FGG484 484-ball fbga (fgg484), 23x23x2.44 mm 引脚配置指南
M1AFS600-2FGG484（484-ball fbga (fgg484), 23x23x2.44 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： M1AFS600-2FGG484.
请参阅 数据手册 以查看完整引脚配置。
典型应用
M1AFS600-2FGG484 适用于 6 应用s: Embedded Processor Subsystems, Industrial Automation and Control, Mixed-Signal Sensor Aggregation, Secure Single-Chip Systems, Interface Bridging and Glue Logic Consolidation, Portable and Space-Constrained Instruments.
Embedded Processor Subsystems
The ARM Cortex-M1 hard core inside the M1AFS600-2FGG484 lets one 484-FBGA chip replace an MCU-plus-FPGA two-chip solution, cutting BOM cost and board area. The 13,824 logic cells implement custom peripherals (SPI, UART, CAN-style bridges) around the processor while on-chip flash blocks store firmware, removing external NOR flash. Because configuration is flash-based, the system is ready within microseconds of power-up - important in applications with fast-restart requirements. Designers should budget the Cortex-M1 clock from the Fusion on-chip clock generation circuitry and verify timing at the -2 speed grade in Libero SoC.
推荐
Industrial Automation and Control
In factory automation nodes, the Fusion fabric's deterministic flash-based logic handles I/O scanning, sequencing, and interface bridging while the Cortex-M1 core runs protocol stacks. The 172 user I/Os at 1.5V core operation with bank-selectable I/O standards connect sensors, actuators, and field buses; configurable analog blocks monitor supply voltages and board temperatures without external supervision ICs. Non-volatile configuration means an industrial line restarts instantly after power dips, avoiding SRAM-FPGA reconfiguration delays. Place the device on a 6-layer PCB with separate analog plane to preserve the on-chip analog sensing accuracy specified in the Fusion datasheet.
推荐
Mixed-Signal Sensor Aggregation
Fusion's monolithic configurable analog plus digital fabric makes this part a single-chip front-end aggregator: analog channels monitor multi-rail voltages, while 600K gates of flash logic timestamp, filter, and packetize readings. Compared with a discrete ADC-plus-FPGA chain, the M1AFS600-2FGG484 removes analog-to-digital interface design and one power domain. The 130nm flash process gives low static power in always-on monitoring roles. A key performance consideration is analog reference decoupling - follow Microchip's Fusion analog application guidance and keep sensing traces short from connector to the FGG484 balls to limit error injection.
推荐
Secure Single-Chip Systems
Flash-based FPGAs store their bitstream on-chip, eliminating the external configuration readback attack surface of SRAM FPGAs. For equipment where firmware IP protection matters - industrial instruments, network appliances, licensed medical devices - the M1AFS600-2FGG484 provides single-chip logic plus Cortex-M1 execution with no configuration flash to clone. The 484-FBGA package further obscures trace-level reverse engineering relative to fine-pitch QFP alternatives. Designers should enable Fusion's available flash-security features in Libero SoC and control JTAG access at the board level, since the programming port remains the primary access path.
推荐
Interface Bridging and Glue Logic Consolidation
Legacy boards often carry several ASSPs, buffers, and CPLDs. The M1AFS600-2FGG484 consolidates such glue logic into 600K gates with 172 I/Os, letting one part bridge memory buses, legacy parallel interfaces, and serial links. Because the fabric is flash-based, bridge firmware is fixed at production with no load-time risk, and the -2 speed grade supports moderate-speed parallel bus timing. Migration from smaller Fusion devices (e.g., M1AFS250) is straightforward since the toolchain and design libraries are shared, though the 484-ball footprint change requires a new PCB - plan the footprint when first taping out.
推荐
Portable and Space-Constrained Instruments
The 23x23x2.44 mm FGG484 package and monolithic integration of analog, flash, clock management, and the Cortex-M1 core suit handheld and benchtop instruments where board area and power matter. Flash-based operation removes configuration power-up draw and external memory, and the 130nm process holds static power low for battery-assisted designs. The 0.5mm-pitch BGA is manufacturable with standard SMT reflow. Thermal design is easy at these densities: estimated power for typical mixed-signal Fusion workloads remains in the sub-watt range, so copper pours under the package usually suffice - verify with Libero power estimation for your utilization.
推荐
推荐产品汇总
工程参考数据： M1AFS600-2FGG484 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | M1AFS600-FGG484I | M1AFS600-FG484K | M1AFS600-1FGG484I | M1AFS600-2FG484 | AFS600-2FGG484 |
|---|---|---|---|---|---|---|
| Package | 484-ball FBGA (FGG484), 23x23x2.44 mm | 484-FBGA (FGG484) - same | 484-FBGA (FG484) - same footprint | 484-FBGA (FGG484) - same | 484-FBGA (FG484) - same footprint | 484-FBGA (FGG484) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology (Microsemi) |
| System Gates | 600K | 600K | 600K | 600K | 600K | 600K |
| Logic Cells | 13,824 | 13,824 | 13,824 | 13,824 | 13,824 | 13,824 |
| User I/O | 172 | 172 | 172 | 172 | 172 | 172 |
| ARM Cortex-M1 Hard Core | Yes | Yes | Yes | Yes | Yes | No |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
关键差异点
- Embedded ARM Cortex-M1 hard processor （对比 AFS600-2FGG484)
- Faster -2 speed grade in the same footprint （对比 M1AFS600-1FGG484I)
- Non-volatile flash configuration (instant-on) （对比 SRAM-based competitor FPGAs)
- Monolithic mixed-signal integration （对比 M1AFS600-FGG484I)
设计说明
The FGG484 is a 23x23 mm, 0.5 mm-pitch, 2.44 mm-tall FBGA. Plan a 6-layer or higher stackup with via-in-pad or dog-bone fanout; 0.5 mm pitch BGA escape is typically feasible with 0.15 mm drill and 0.10-0.12 mm trace/space on outer layers. Dedicate at least one solid plane to the 1.5V core rail and separate I/O bank planes where bank voltages differ. Because the part is flash-based with no configuration flash, no boot-time routing or config-flash footprint is needed - simplifying layer count versus an equivalent SRAM FPGA build.
Power the 1.5V core with a dedicated regulator and observe the Fusion power-up sequencing requirements from the manufacturer datasheet before applying I/O bank voltages. Estimated: static power on 130nm flash Fusion at moderate utilization is typically well under 1 W, but dynamic power scales with toggle rate - run Microchip Libero SoC power estimation with your actual utilization and I/O standards before selecting the regulator. Provide bulk and 0.1 uF decoupling per Fusion power-supply guidance, and measure real current on first prototypes rather than relying on estimates.
Two frequent mistakes with this part: (1) substituting a different speed grade (e.g., M1AFS600-1FGG484I for the -2) without re-running timing closure in Libero SoC - timing that met -2 constraints can fail at -1; (2) assuming AFS600 (non-M1) parts are code-compatible - the AFS600-2FGG484 lacks the Cortex-M1 hard core, so M1 designs need a soft processor. Also confirm the Libero SoC release you use still supports the Fusion family before tool upgrades, and control JTAG access on production boards to preserve the flash configuration security advantage.
合规信息
Newark listing states RoHS Compliant: Yes for this part. REACH, halogen, lead-free and conflict-minerals status not stated in reviewed distributor listings as of 2026-09-02; consult Microchip's environmental documentation.
