MAX14803CCM+T - 16-Channel High-Voltage Switch | ADI
料号: MAX14803CCM+T ✓ 量产中MAX14803CCM+T 概述
A high-voltage analog switch is an integrated circuit that routes external signals between internal circuits while isolating inactive channels. The MAX14803CCM+T belongs to the broader analog switch and multiplexer hierarchy within interface ICs. Its 16 independently addressed SPST switches allow a controller to select high-voltage imaging or print signals while limiting charge injection into sensitive measurement channels.
The MAX14803 family uses high-voltage CMOS technology to combine 16 high-voltage, low-charge-injection SPST switches with a digital serial interface. Control data is clocked into a 16-bit internal shift register, retained by a programmable latch, and managed through enable and clear inputs. This architecture supports deterministic channel selection across multichannel ultrasonic and printing systems.
The principal electrical characteristics include 48 ohm on-resistance, 3500 ns turn-on time, 3500 ns turn-off time, and operation from 2.7 V to 5.5 V. The commercial operating-temperature range is -40 C to +85 C. The 48-LQFP surface-mount package provides 48 terminals for external channel connections, logic control, supply rails, and ground returns.
Typical applications include ultrasonic medical imaging, industrial ultrasonic inspection, high-voltage printhead and printer signal switching, and multichannel test systems. The 16-channel architecture reduces the number of discrete high-voltage switching elements required, while the digital interface simplifies coordinated channel updates. Low charge injection is particularly important when the switched signals feed precision amplifiers or measurement front ends.
Designers should place input and output return paths carefully to minimize coupling between the 16 switched channels. Verify the allowable signal voltage, off-state isolation, and switching timing against the manufacturer datasheet before using the device outside ultrasonic-imaging or printer signal chains. Confirm that board-level timing provides sufficient setup and hold margin around latch, enable, clock, and clear signals.
This product page combines the manufacturer device description with application guidance, package details, verified parameter values, and practical comparisons with closely related MAX14802 and MAX14803A family members. It supports faster component selection by separating confirmed electrical characteristics from parameters that must be checked in the manufacturer datasheet before layout or production release.
直接替换替代料: MAX14803CCM+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX14803CCM+T (相同外形与封装尺寸) ——差异在于 Number of Channels, Switch Configuration.
MAX14803ACM+T
✅ 直接替换📋 参考替代料(不在目录中)
MAX14802CCM+T
✅ 直接替换联系询价
查看数据手册 →MAX14802ACM+T
✅ 直接替换📋 参考替代料(不在目录中)
MAX14803CCM+T 最大额定值与电气特性
| Number of Channels | 16 channels |
| Switch Configuration | 16 SPST switches |
| On-Resistance | 48 ohm |
| 电源电压 | 2.7 V to 5.5 V |
| Turn-On Time | 3500 ns |
| Turn-Off Time | 3500 ns |
| 工作温度 | -40 C to +85 C |
| Process Technology | HVCMOS |
| Control Architecture | 16-bit serial shift register with programmable latch, enable, and clear inputs |
| Number of Terminals | 48 terminals |
| 封装 | 48-LQFP (7 mm x 7 mm) |
| 安装类型 | Surface mount |
| Isolation | 50 dB |
| Primary Application | Ultrasonic imaging and printer signal switching |
MAX14803CCM+T 48-lqfp (7 mm x 7 mm) 引脚配置指南
MAX14803CCM+T(48-lqfp (7 mm x 7 mm) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX14803CCM+T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX14803CCM+T 适用于 6 应用s: Ultrasonic Medical Imaging, Industrial Ultrasonic Inspection, High-Voltage Printer Signal Routing, Multichannel Test and Measurement, High-Voltage Signal Multiplexing, Precision Measurement Front Ends.
Ultrasonic Medical Imaging
MAX14803CCM+T fits multichannel ultrasonic imaging front ends that require coordinated routing of high-voltage transducer signals. Its 16 SPST switches reduce the number of separate discrete switching networks, while the 48 ohm on-resistance and 3500 ns switching times provide defined electrical behavior for receive-path multiplexing. The manufacturer identifies ultrasonic imaging as a primary application and emphasizes low charge injection, which helps limit unwanted transients at sensitive receiver inputs. Confirm the maximum switched voltage, off-state isolation, leakage, and timing margin for the selected imaging architecture before release.
推荐
Industrial Ultrasonic Inspection
MAX14803CCM+T is suitable for phased-array and industrial ultrasonic inspection systems that switch multiple high-voltage channels around transducers, pulser circuitry, and receiver amplifiers. Sixteen serially controlled SPST channels allow one internal shift register to coordinate channel selection, while the 48 ohm on-resistance and 3500 ns turn-on and turn-off times provide useful design limits. For equipment operating near high-power stages, preserve controlled return paths and verify channel-to-channel isolation and allowable signal voltage in the manufacturer datasheet.
推荐
High-Voltage Printer Signal Routing
MAX14803CCM+T can route multiple high-voltage signals in printer and printhead systems where discrete switch complexity would be difficult to manage. The device provides 16 low-charge-injection SPST switches, a 48 ohm on-resistance, and 3500 ns transition times in a 7 mm by 7 mm LQFP. These characteristics support coordinated multichannel routing when the printhead waveform, load capacitance, and permissible voltage are checked against the family limits. Keep clock, latch, enable, and clear traces away from sensitive switched-node paths.
推荐
Multichannel Test and Measurement
MAX14803CCM+T is appropriate for multichannel test systems that need to route controlled high-voltage signals to instrumentation or DUTs. Its 16 SPST channels provide scalable routing without requiring 16 separately controlled switch packages, and the serial shift-register architecture simplifies deterministic pattern sequencing. The 2.7 V to 5.5 V logic supply and 3500 ns switching times define the operating envelope for fixture timing. Before selecting it, confirm maximum signal voltage, leakage, isolation, and charge injection against the measurement accuracy requirement.
推荐
High-Voltage Signal Multiplexing
MAX14803CCM+T can serve as a multichannel high-voltage signal multiplexer when one of 16 SPST paths must connect to a shared downstream circuit. The 48 ohm on-resistance establishes the nominal path impedance, while the 3.5 us switching interval defines the maximum transition behavior at the specified test conditions. Serial control allows the routing pattern to be loaded into the 16-bit shift register and retained by the latch. Validate signal amplitude, common-mode range, and timing against the exact measurement and control circuitry before implementation.
推荐
Precision Measurement Front Ends
MAX14803CCM+T is useful ahead of precision measurement amplifiers when multiple input channels require switching and low injected charge is important. The manufacturer specifically describes the MAX14803 family as offering low-charge-injection SPST switches, helping reduce control-induced transients at sensitive inputs. Its 48 ohm on-resistance and 3500 ns switching times should be included in the complete settling-time analysis. Designers must also account for input capacitance, leakage, channel isolation, and any downstream amplifier recovery time after each transition.
推荐
推荐产品汇总
工程参考数据: MAX14803CCM+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX14803ACM+T | MAX14802CCM+T | MAX14802ACM+T |
|---|---|---|---|---|
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 16 channels | 16 channels | 16 channels | 16 channels |
| Switch Configuration | 16 SPST switches | 16 SPST switches | 16 SPST switches | 16 SPST switches |
| Process Technology | HVCMOS | HVCMOS | HVCMOS | HVCMOS |
| Primary Applications | Ultrasonic imaging and printers | Ultrasonic imaging and printers | Ultrasonic imaging and printers | Ultrasonic imaging and printers |
关键差异点
- Defined multichannel switching performance (对比 MAX14802CCM+T)
- Same 48-channel LQFP mechanical outline (对比 MAX14803ACM+T)
- Compact 16-channel integration (对比 MAX14802ACM+T)
设计说明
Route each switched channel with a continuous reference path and keep clock, latch, enable, and clear traces away from high-voltage and high-impedance analog nodes. Place the device close to the interface that requires switching so loop area remains small. Use the manufacturer pin-description table and recommended layout in the MAX14802-MAX14803A datasheet when assigning the 48 LQFP terminals.
Include the 3500 ns turn-on and turn-off times in the receiver settling calculation rather than assuming the digital latch command equals valid analog settling. Account for downstream amplifier recovery, node capacitance, path resistance, and the 48 ohm switch resistance. This is especially important in ultrasonic channels where residual transients can affect subsequent measurements.
Decouple the 2.7 V to 5.5 V supply following the manufacturer recommendations and keep switching-node return currents from sharing paths with sensitive analog returns. Confirm the exact supply pins and capacitor configuration from the family datasheet before layout. Separate logic and switched-signal routing where practical to reduce control-edge coupling.
Do not substitute a family member based only on its 48-LQFP outline. MAX14803A and MAX14802 variants can differ in signal-voltage limits, timing, qualification, or other channel specifications. Compare the pin description, electrical characteristics, and absolute maximum ratings for both devices before approving a drop-in replacement.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the listed technical descriptions. AEC-Q100 is not applicable because MAX14803CCM+T is an analog switch IC rather than an automotive-qualified device.