MC68HC705L32FU - 8-Bit MCU, 8KB ROM, 256B RAM | Freescale
料号： MC68HC705L32FU ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $16.2097 | $16.21 |
| 10 | $16.2097 | $162.10 |
| 100 | $16.2097 | $1,620.97 |
| 500 | $16.2097 | $8,104.85 |
| 1,000 | $16.2097 | $16,209.70 |
MC68HC705L32FU 概述
A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, and peripherals into one component. In the product hierarchy, the MC68HC705L32FU is an embedded microcontroller, an 8-bit microcontroller, and an HC05-family MCU. Its value lies in consolidating deterministic control functions into a single package, reducing the number of discrete logic components needed for industrial equipment, appliance controllers, and legacy embedded platforms.
The available verified data confirms an 8-bit HC05 CPU and identifies the broader family as having sophisticated on-chip peripheral functions. The documented memory map includes 8 Kbytes of user ROM and 256 bytes of static RAM. Five parallel I/O ports provide a practical interface to switches, indicators, relays, sensors, and other digital peripheral devices. The product search data does not provide verified operating voltage, clock frequency, package dimensions, pin-level function assignments, or absolute maximum ratings.
The HC705L architecture is a legacy embedded-control platform rather than a high-performance processor. It is best suited to firmware that coordinates digital inputs and outputs, timing, and simple peripheral interactions. Because exact timing and electrical limits are not present in the supplied verified data, design engineers should not infer them from modern MCU families. The manufacturer family datasheet should be consulted for clock, reset, interrupt, port, power, and timing details before schematic capture or firmware deployment.
Typical application domains include industrial control equipment, appliance and appliance-adjacent controllers, instrumentation interfaces, legacy machine controls, and embedded systems that already use HC05-family software or peripherals. The five documented parallel ports make the device particularly relevant when a system requires several digital lines rather than a high-speed serial interface. Exact MCU selection still depends on checking the package footprint, pin multiplexing, memory requirements, and electrical limits.
A key design consideration is legacy-toolchain compatibility. Engineers should preserve the original HC05 memory map, port assignments, reset behavior, and interrupt conventions unless a complete hardware review confirms that a substitute is electrically and software compatible. The supplied search results identify availability and pricing resources, but do not establish that any alternative is pin-to-pin drop-in.
This product page consolidates the verified family memory description, distributor availability references, package-related uncertainty, and procurement links. It also distinguishes documented MC68HC705L characteristics from parameters that still require verification in the exact MC68HC705L32FU datasheet and package drawing.
直接替换替代料： MC68HC705L32FU ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC68HC705L32FU （相同外形与封装尺寸） ——差异在于 Architecture, Mounting Type, Package, Program Memory Type.
快速对比工具——选择替代料号进行并排对比：
该产品暂无直接替换替代料。
请求替代料MC68HC705L32FU 最大额定值与电气特性
| Device Type | 8-bit embedded microcontroller |
| CPU Family | HC05 |
| Architecture | 8-bit HC05 CPU |
| User ROM | 8 Kbytes |
| Static RAM | 256 bytes |
| Parallel I/O Ports | 5 ports: A, B, C, D, E |
| Family Pin Count | 80 pins |
| Manufacturer | Freescale Semiconductor |
| MSL 等级 | 2 (1 year) |
| REACH Status | REACH Affected |
MC68HC705L32FU standard 引脚配置指南
MC68HC705L32FU（standard 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC68HC705L32FU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC68HC705L32FU 适用于 6 应用s: Legacy Industrial Control, Appliance Controller, Digital Instrumentation Interface, Machine Sequencing Controller, Legacy Peripheral Controller, Educational Legacy Controller.
Legacy Industrial Control
The MC68HC705L32FU fits legacy industrial-control panels that use an 8-bit HC05 CPU, 8 Kbytes of user ROM, and 256 bytes of static RAM. Its five documented parallel ports—A, B, C, D, and E—provide a direct interface for pushbuttons, selector switches, status lamps, relay drivers, and machine-state indicators. A typical controller would place the MCU near the I/O connector, map inputs through the relevant port pins, and use firmware for debounce, sequencing, interlocks, and fault indication. The exact package footprint, port multiplexing, electrical levels, and timing must be verified before layout because those values are not present in the supplied verified data.
推荐
Appliance Controller
The MC68HC705L32FU is appropriate for an appliance or legacy equipment controller where a compact 8-bit CPU can manage several digital I/O functions without a large system-on-chip. Its documented 8 Kbytes of user ROM can hold control logic, state-machine tables, and input filtering, while the 256-byte static RAM requires disciplined allocation for variables and stack usage. Ports A through E can connect user controls, indicator drivers, interlock signals, and actuator commands. Designers should confirm the exact supply voltage, clock circuit, reset behavior, and port electrical limits from the exact datasheet before approving a new appliance design.
推荐
Digital Instrumentation Interface
The MC68HC705L32FU can be used as the low-cost digital supervisory controller in legacy instrumentation, provided the interface requirements match the HC05 peripheral set. Five parallel ports allow the MCU to read mode switches, acknowledge commands, drive display-control signals, and monitor equipment status. Its 8-bit architecture and 8 Kbytes of ROM are appropriate for supervisory logic rather than high-bandwidth signal processing. Engineers should use the family datasheet to verify timer, interrupt, serial, and port functions; those details are not included in the supplied search snippets and must not be assumed for a new design.
推荐
Machine Sequencing Controller
The MC68HC705L32FU is well matched to small machine-sequencing controllers that coordinate discrete steps rather than execute complex motion algorithms. The documented 8-bit HC05 CPU, 8 Kbytes of ROM, 256 bytes of RAM, and five parallel ports support state-machine firmware for start, stop, pause, alarm, and interlock functions. Port outputs can drive isolated logic levels or external driver circuits rather than directly powering motors or high-current loads. Because the exact pinout and electrical ratings are unavailable in the supplied data, the designer must add appropriate buffering, isolation, protection, and verified pull-up or pull-down networks.
推荐
Legacy Peripheral Controller
The MC68HC705L32FU can serve as a dedicated peripheral controller in equipment that already uses HC05-family firmware conventions. Ports A through E offer multiple digital channels for configuring sensors, reading interlock signals, controlling relays, and reporting status to a larger system. Its limited RAM makes compact state handling important, so firmware should avoid unnecessary buffering and should reserve stack space deliberately. The exact peripheral set and multiplexing must be checked in the manufacturer documentation. This page does not recommend a modern substitute because the supplied cross-reference results contain no confirmed same-package replacement.
推荐
Educational Legacy Controller
The MC68HC705L32FU can support educational work involving an 8-bit embedded architecture, parallel-port control, and small finite-state machines. Its documented 8 Kbytes of user ROM and 256 bytes of static RAM make memory usage visible and help students reason about constrained embedded design. The five parallel ports provide a simple laboratory interface for LEDs, switches, sensors, and relay-driver circuits. Because the verified data does not establish the current toolchain, programming method, operating voltage, or exact package pinout, instructional use should rely on a verified HC05 development reference rather than assumptions about modern development boards.
推荐
推荐产品汇总
工程参考数据： MC68HC705L32FU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | NXP Semiconductors |
| CPU Architecture | 8-bit HC05 CPU |
| User ROM | 8 Kbytes |
| Static RAM | 256 bytes |
| Parallel I/O Ports | 5 ports: A, B, C, D, E |
| Listed Price | $16.2097 starting price as of 2026-10-20 |
关键差异点
- Documented HC05-specific embedded architecture （对比 MC68HC705X32CFU)
- Compact memory footprint for legacy control firmware （对比 MC9S08AC8MFGE)
- Five named parallel ports （对比 MC9S08AC8MFGE)
- Legacy supply sourcing visibility （对比 MC68HC705X32CFU)
设计说明
Do not begin layout from the family description alone. The verified data states that the broader MC68HC705L family is an 80-pin MCU, but it does not identify the exact FU land pattern or provide a complete pin table. First confirm the package drawing, pin numbering, exposed features, and board footprint from the exact datasheet. Then route power, ground, clock, reset, and port signals according to that package-specific drawing; changing pin assignments from another HC05 variant can cause nonfunctional or unsafe hardware.
The supplied verified data does not state the operating voltage, absolute maximum ratings, supply sequencing, or required bypass capacitance for MC68HC705L32FU. Do not select a regulator or capacitor values by analogy with another HC05 part. Use the exact manufacturer electrical specification, verify input and I/O voltage limits, and include appropriate protection for exposed legacy control boards. Power-budget calculations require confirmed datasheet values and should be recorded as estimates only when based on explicit inputs.
Legacy MCU replacements are especially vulnerable to hidden incompatibilities. A substitute may use the same nominal family name while differing in suffix code, package, reset polarity, clock requirements, port multiplexing, memory map, or peripheral behavior. The supplied cross-reference search results identify generic search tools but no verified drop-in equivalent. Preserve the original MC68HC705L32FU for maintenance, or obtain a manufacturer-supported comparison covering pinout, timing, electrical limits, firmware, and supply-chain status.
Keep clock and reset traces short and away from relay-coil, motor-drive, and switching-power nodes. If five parallel ports connect to external equipment, use series damping or Schmitt-trigger buffering where appropriate, and terminate unused inputs according to the verified device recommendations. Because exact rise-time, I/O, and timing data are not supplied, validate the board with scope measurements and avoid assuming that a modern MCU's I/O structure applies to this HC05 device.
合规信息
The GlobalSpec result explicitly reports REACH Affected for MC68HC705L32FU. RoHS, lead-free, halogen-free, conflict-minerals, and automotive qualification information were not supplied. REACH Affected is reported exactly from the verified listing and should not be interpreted as a complete legal certification assessment.
