MC9S08DN60ACLF - 8-Bit 40MHz 60KB MCU | NXP Semiconductors
料号： MC9S08DN60ACLF ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.3256 | $3.33 |
| 10 | $3.3256 | $33.26 |
| 100 | $3.3256 | $332.56 |
| 500 | $3.3256 | $1,662.80 |
| 1,000 | $3.3256 | $3,325.60 |
MC9S08DN60ACLF 概述
An S08DN microcontroller is an embedded-control device that combines a CPU, Flash program memory, peripherals, interrupt handling, and debug or emulation support on one integrated circuit. Within the broader semiconductor hierarchy, the MC9S08DN60ACLF belongs to the embedded microcontroller family and is intended for compact control systems that require deterministic 8-bit processing rather than a high-performance application processor.
The available data specifically identifies a 60K x 8 Flash configuration, 40 MHz core performance, an 8-bit architecture, and a 48-LQFP package. The verified search results also associate the S08DN family with embedded CAN, embedded EEPROM, and on-chip emulation or debug features, although the supplied snippets do not provide complete electrical ratings, pin-level details, or operating-temperature values. Those missing values are therefore not inferred here.
Typical uses for this MCU include embedded automotive or industrial control, CAN-connected equipment, sensor acquisition, actuator control, and compact communication modules. The 40 MHz performance rating can support time-sensitive control loops, while 60 KB of Flash provides program storage for embedded firmware. The available information does not establish a specific CAN transceiver, connector, or sensor recommendation, so application companion parts are limited to devices whose relationship is clearly supported by the verified data or the supplied site list.
When designing around the MC9S08DN60ACLF, engineers should verify the complete datasheet pinout, supply limits, peripheral mapping, programming method, and package-specific layout requirements before release. Because the NXP page lists the part as NRND, long-life products should include an approved lifecycle strategy, stock monitoring, and a review of any official product-change notices before committing to new designs.
This page synthesizes the verified manufacturer and distributor information, lifecycle indication, package identity, memory and speed ratings, and application-selection guidance. It also records unavailable parameters instead of estimating them, making the result suitable for initial component discovery while preserving the need for datasheet-level engineering verification.
MC9S08DN60ACLF 最大额定值与电气特性
| Architecture | 8-bit |
| Core | S08 HCS08 core |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 60 KB (60K x 8) |
| Bus Frequency | 20 MHz |
| 封装 | 48-LQFP (7 x 7 mm) |
| Package Family | LQFP |
| 安装类型 | Surface Mount |
| Terminal Count | 48 terminals |
| Temperature Grade | Industrial |
| Embedded CAN | Supported by the S08DN family description |
| Embedded EEPROM | Supported by the S08DN family description |
| On-Chip Emulation/Debug | Supported by the S08DN family description |
| Interrupt/Reset Sources | Up to 32 sources |
| Instruction Set | HC08 instruction set with BGND instruction |
| 生命周期状态 | NRND |
| RoHS 状态 | unknown |
| REACH Status | unknown |
MC9S08DN60ACLF lqfp 引脚配置指南
MC9S08DN60ACLF（lqfp 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC9S08DN60ACLF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08DN60ACLF 适用于 6 应用s: Embedded Automotive Control, Industrial Sensor Acquisition, CAN-Connected Control Module, Actuator and Motor-Control Subsystem, Embedded Communication Equipment, Legacy HCS08 Firmware Platform.
Embedded Automotive Control
The MC9S08DN60ACLF fits legacy automotive-oriented embedded-control designs that use an 8-bit S08DN architecture, a 40 MHz core, and 60 KB of Flash. Its S08DN family association with embedded CAN and on-chip emulation/debug makes it useful for compact control modules, actuator interfaces, and sensor-conditioning systems. The verified material does not provide a complete CAN transceiver or connector recommendation, so the designer must confirm peripheral availability, electrical limits, and automotive qualification requirements in the official NXP datasheet. Because the part is NRND, production use should include a lifecycle review and an approved supply plan rather than a new-design assumption.
推荐
Industrial Sensor Acquisition
The MC9S08DN60ACLF is suitable for compact industrial sensing and signal-conditioning modules where an 8-bit controller is sufficient and firmware storage is limited to the verified 60 KB Flash capacity. Its 40 MHz core can support responsive acquisition tasks, while the S08DN family's stated embedded EEPROM feature can be useful for local parameters and calibration data. A complete design still needs verified ADC, I/O, timing, and interrupt specifications from the NXP datasheet. The package footprint is 48-LQFP at 7 x 7 mm, making it suitable for dense control boards when the PCB library and thermal requirements are correctly implemented.
推荐
CAN-Connected Control Module
The MC9S08DN60ACLF can serve as the controller in a compact CAN-connected industrial or equipment module because the verified S08DN family material identifies embedded CAN support. It would normally handle application firmware, local I/O, diagnostics, and communication supervision while an external transceiver interfaces the physical CAN network. The available snippets do not confirm the target's exact CAN feature set, transceiver requirements, termination arrangement, or electrical operating range, so those points must be verified before schematic capture. Its NRND status makes lifecycle continuity especially important for deployed equipment.
推荐
Actuator and Motor-Control Subsystem
The 40 MHz S08DN core and 60 KB Flash configuration make the MC9S08DN60ACLF a plausible fit for small actuator-control subsystems that require deterministic embedded logic without a higher-complexity processor. The controller could supervise relays, valves, stepper mechanisms, or discrete power stages through external drivers, provided the verified peripheral and timing requirements match the design. The supplied data does not provide motor-driver specifications, PWM limits, or thermal ratings, so those values must not be inferred from the MCU frequency. A legacy actuator platform with existing S08D firmware is a more defensible use case than a new safety-critical design.
推荐
Embedded Communication Equipment
The MC9S08DN60ACLF can be evaluated for small protocol-handling or equipment-control products where the S08DN ecosystem, on-chip debug support, and 60 KB Flash are more valuable than application-processor performance. The verified family information identifies embedded CAN, EEPROM, and emulation/debug resources, which can reduce external component count in an appropriate architecture. However, the supplied data does not specify UART, SPI, I2C, Ethernet, or wireless capabilities, and it does not identify a matching transceiver. Confirm all communication peripherals, pin multiplexing, memory timing, and package routing against the current manufacturer documentation.
推荐
Legacy HCS08 Firmware Platform
The MC9S08DN60ACLF is appropriate for maintaining or cloning an existing HCS08/S08D-based platform when software, boot code, and board-level dependencies already match its 8-bit architecture and 40 MHz execution rate. Its 60 KB of Flash can hold application firmware in the stated configuration, and the family's on-chip emulation/debug support can simplify laboratory bring-up when the relevant programmer and S08D toolchain remain available. Because the device is NRND, a redesign may be required for new products, but a controlled migration can be easier than changing all firmware and peripheral assumptions simultaneously.
推荐
推荐产品汇总
工程参考数据： MC9S08DN60ACLF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 48-LQFP (7 x 7 mm) |
| Brand | NXP Semiconductors |
| Architecture | 8-bit |
| Core | S08 HCS08 core |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Flash Memory | 60 KB (60K x 8) |
| Embedded CAN | Supported by the S08DN family description |
| Embedded EEPROM | Supported by the S08DN family description |
| Lifecycle Status | NRND |
关键差异点
- Higher verified Flash capacity than the related MC9S08DN32MLF reference （对比 MC9S08DN32MLF)
- Explicit 40 MHz core rating （对比 MC9S08AW48CFGER)
- 48-LQFP package identity （对比 MC9S08AC128CFGE)
- S08DN family migration context （对比 MC9S08AW60CFUE)
设计说明
Use the verified 48-LQFP 7 x 7 mm footprint only after checking the current NXP package drawing and PCB land pattern. Keep power and ground connections short, place decoupling close to the relevant pins, and route no-connect and programming signals according to the official pinout. The supplied snippets do not identify every power pin or exposed-pad connection, so do not infer pad assignments from the package name alone.
Do not substitute an S08-family MCU based only on core frequency, Flash size, or package name. Confirm the complete pin map, supply range, clock configuration, reset behavior, memory map, peripheral multiplexing, and S08D programming/debug compatibility. The MC9S08DN60ACLF is listed as NRND, so a new PCB or firmware branch should also include a documented migration and supply-risk plan.
Before powering the board, obtain the official operating-voltage and absolute-maximum ratings from the NXP datasheet; those values are not present in the supplied verified data. Check the regulator startup sequence, decoupling capacitance, analog and digital supply requirements, and current budget against the complete device specification. The 40 MHz CPU rating must not be used as a proxy for supply-current capability or thermal performance.
Separate clock-sensitive traces from high-current switching paths and keep debug or programming interfaces away from noisy analog and switching nodes. If the design uses the S08DN family's stated embedded CAN capability, isolate the MCU-side logic from the physical network through an appropriate external transceiver and follow its recommended termination and layout guidance. Exact pin roles and peripheral constraints must come from the official datasheet.
合规信息
The supplied verified results identify the manufacturer and product lifecycle status but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Industrial temperature grade is reported by the Vyrian result, but it is not equivalent to an automotive qualification.