MC9S08RG60FJE - 8-Bit 8MHz 60KB Flash MCU | NXP
料号： MC9S08RG60FJE ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC9S08RG60FJE 概述
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-computing component. The S08 architecture is a compact 8-bit core used to execute control firmware, sample inputs, operate timers, and manage communication or actuator functions. Within the broader semiconductor hierarchy, this device is a microcontroller and therefore an embedded-processing IC rather than a general-purpose processor, analog regulator, or power component.
The headline configuration combines a maximum stated frequency of 8 MHz with 60 KB of flash, giving firmware designers a defined execution-speed and program-memory budget. Flash retains programmed code when power is removed, supporting field updates and persistent embedded behavior. However, the supplied evidence does not include RAM size, operating-voltage range, peripheral inventory, flash endurance, temperature limits, or I/O ratings, so those specifications must be confirmed from the official NXP or Freescale device documentation before design release.
The 32-LQFP package provides a substantially larger pin count than a basic 8-pin controller, potentially supporting multiple digital I/O and hardware functions. Exact pin names, alternate functions, exposed-pad details, and electrical limits are not present in the provided evidence, so assigning a complete pinout from memory would be unsafe. The package drawing and pin table must be taken directly from the applicable official datasheet or reference manual.
Typical uses include industrial control modules, appliance controllers, sensor-interface nodes, compact automation products, and low-cost embedded products whose firmware fits within the available program memory. The 8 MHz S08 core is particularly relevant to simple sequencing, status monitoring, key and button handling, light-duty motor control, and peripheral coordination where higher processing bandwidth is unnecessary.
Design selection should begin with a memory-budget review and complete peripheral-level validation. Confirm the required RAM, I/O count, analog functions, communication peripherals, clock options, reset behavior, and voltage constraints in the official documentation. Preserve the specified 32-LQFP footprint when making a second-source or board-reuse decision; another package cannot be treated as a drop-in replacement merely because it performs a similar function.
This page consolidates the verified product identity, package, processor class, and sourcing references while explicitly separating confirmed facts from data still needed for engineering approval. Its value lies in honest gap disclosure: no unverified pinout, timing, memory, compliance, price, or drop-in substitution is presented as established fact.
MC9S08RG60FJE 最大额定值与电气特性
| Manufacturer | NXP Semiconductors |
| Product Type | 8-bit microcontroller |
| Series | S08 |
| Processor Architecture | S08 |
| Processor Word Size | 8 bit |
| Maximum Stated Frequency | 8 MHz |
| Flash Memory | 60 KB |
| Memory Organization | 60K x 8 |
| 封装 | 32-LQFP (7 mm x 7 mm) |
| Lead Count | 32 pins |
| 安装类型 | Surface mount |
MC9S08RG60FJE 32-lqfp (7 mm x 7 mm) 引脚配置指南
MC9S08RG60FJE（32-lqfp (7 mm x 7 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC9S08RG60FJE.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08RG60FJE 适用于 6 应用s: Industrial Control Module, Appliance Controller, Sensor Interface Node, Battery-Powered Monitor, Compact Automation Product, Motor or Relay Sequencer.
Industrial Control Module
The MC9S08RG60FJE fits a compact controller that manages discrete inputs, operating states, and actuator commands within a 60 KB flash budget. Its confirmed 8 MHz S08 core can execute deterministic sequencing logic without implying suitability for heavy computation. The 32-LQFP package provides more physical connection capacity than a minimal eight-pin MCU, but the actual I/O count and alternate functions must be verified from the official pin table. For industrial use, confirm operating temperature, supply range, EMC performance, and lifecycle status before production release.
推荐
Appliance Controller
An appliance control board can use the MC9S08RG60FJE for user-input handling, operating-state logic, timing, and communication coordination when its firmware remains within 60 KB of flash. The 8 MHz S08 processor is appropriate for straightforward control rather than graphics-intensive workloads. Because the supplied evidence does not identify RAM, timers, serial interfaces, or I/O levels, the design must be checked against motor, heater, mains, and user-interface requirements before schematic approval.
推荐
Sensor Interface Node
The MC9S08RG60FJE can serve as the local processor for a sensor node that converts inputs into status data, applies thresholds, and manages a downstream communication link. Its confirmed 60 KB flash provides a defined firmware ceiling, while the 8 MHz S08 core handles straightforward acquisition and control tasks. The supplied evidence does not list analog converters or communication peripherals, so engineers must verify signal conditioning, interface timing, RAM, and pin multiplexing in the official documentation.
推荐
Battery-Powered Monitor
A battery-powered monitor can use the MC9S08RG60FJE for periodic measurement, threshold evaluation, event logging, and low-duty-cycle control. Its 8 MHz S08 core is capable of routine embedded logic, but battery life depends on the unprovided sleep-mode currents, active current, and clock configuration. Validate those values in the official datasheet and calculate the duty cycle from the actual standby and active loads rather than assuming low power from the processor category.
推荐
Compact Automation Product
The MC9S08RG60FJE is a practical candidate for a compact automation product requiring local decision-making, nonvolatile firmware storage, and a surface-mount implementation. Firmware can coordinate digital I/O and simple timing functions from the confirmed 8 MHz operating point, provided memory and peripheral requirements fit the device. Its 32-LQFP package also requires adequate board area, fine-pitch assembly capability, and careful escape routing for power, ground, clock, programming, and communications.
推荐
Motor or Relay Sequencer
The MC9S08RG60FJE can implement timing and sequencing for a small motor, relay bank, or mixed electromechanical controller when the required interfaces are present. Its 8 MHz core is sufficient for many state machines and debounce routines, while 60 KB flash provides storage for control code and fixed tables. Before committing, verify output-driver current, timer resolution, protection features, isolation, flyback requirements, and thermal limits because none of those specifications appears in the supplied evidence.
推荐
推荐产品汇总
工程参考数据： MC9S08RG60FJE ——对比、设计指导和合规信息。
选型指南
设计说明
Do not finalize the power tree until the official MC9S08RG60FJE datasheet confirms supply voltage, I/O levels, reset requirements, and external-component recommendations. The supplied evidence does not include current consumption or decoupling requirements. Compare the board's worst-case supply tolerance and digital-interface levels against those limits before routing power pins.
Treat the 32-LQFP footprint as a fine-pitch assembly constraint. Preserve the manufacturer land pattern and pin-one orientation, inspect whether an exposed thermal pad is required, and route programming and debug signals away from noisy switching nodes. Pin names and alternate functions remain unverified because the provided evidence contains no official pin table.
Do not approve an MCU substitution from family name or processor speed alone. A drop-in candidate must reproduce the 32-LQFP land pattern, pin numbering, voltage domain, reset behavior, clocking, memory-map expectations, and required peripherals. Firmware also needs interrupt-vector, timing, driver, and boot-code review because a physically similar MCU may require software migration.
合规信息
No compliance declarations for the exact MPN appear in the supplied verified data. AEC-Q100 status also uses unknown rather than a qualification claim because the evidence does not identify an automotive-qualified variant.