MC9S08RG60FJE - 8-Bit 8MHz 60KB Flash MCU | NXP
部品番号: MC9S08RG60FJE ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC9S08RG60FJE 概要
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-computing component. The S08 architecture is a compact 8-bit core used to execute control firmware, sample inputs, operate timers, and manage communication or actuator functions. Within the broader semiconductor hierarchy, this device is a microcontroller and therefore an embedded-processing IC rather than a general-purpose processor, analog regulator, or power component.
The headline configuration combines a maximum stated frequency of 8 MHz with 60 KB of flash, giving firmware designers a defined execution-speed and program-memory budget. Flash retains programmed code when power is removed, supporting field updates and persistent embedded behavior. However, the supplied evidence does not include RAM size, operating-voltage range, peripheral inventory, flash endurance, temperature limits, or I/O ratings, so those specifications must be confirmed from the official NXP or Freescale device documentation before design release.
The 32-LQFP package provides a substantially larger pin count than a basic 8-pin controller, potentially supporting multiple digital I/O and hardware functions. Exact pin names, alternate functions, exposed-pad details, and electrical limits are not present in the provided evidence, so assigning a complete pinout from memory would be unsafe. The package drawing and pin table must be taken directly from the applicable official datasheet or reference manual.
Typical uses include industrial control modules, appliance controllers, sensor-interface nodes, compact automation products, and low-cost embedded products whose firmware fits within the available program memory. The 8 MHz S08 core is particularly relevant to simple sequencing, status monitoring, key and button handling, light-duty motor control, and peripheral coordination where higher processing bandwidth is unnecessary.
Design selection should begin with a memory-budget review and complete peripheral-level validation. Confirm the required RAM, I/O count, analog functions, communication peripherals, clock options, reset behavior, and voltage constraints in the official documentation. Preserve the specified 32-LQFP footprint when making a second-source or board-reuse decision; another package cannot be treated as a drop-in replacement merely because it performs a similar function.
This page consolidates the verified product identity, package, processor class, and sourcing references while explicitly separating confirmed facts from data still needed for engineering approval. Its value lies in honest gap disclosure: no unverified pinout, timing, memory, compliance, price, or drop-in substitution is presented as established fact.
ドロップイン代替品: MC9S08RG60FJE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC9S08RG60FJE 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors |
| Product Type | 8-bit microcontroller |
| Series | S08 |
| Processor Architecture | S08 |
| Processor Word Size | 8 bit |
| Maximum Stated Frequency | 8 MHz |
| Flash Memory | 60 KB |
| Memory Organization | 60K x 8 |
| パッケージ | 32-LQFP (7 mm x 7 mm) |
| Lead Count | 32 pins |
| 実装タイプ | Surface mount |
MC9S08RG60FJE 32-lqfp (7 mm x 7 mm) ピン配置ガイド
MC9S08RG60FJE (32-lqfp (7 mm x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08RG60FJE.
詳細は データシート をご参照ください。
主な用途
MC9S08RG60FJE の用途: 6 件s: Industrial Control Module, Appliance Controller, Sensor Interface Node, Battery-Powered Monitor, Compact Automation Product, Motor or Relay Sequencer.
Industrial Control Module
The MC9S08RG60FJE fits a compact controller that manages discrete inputs, operating states, and actuator commands within a 60 KB flash budget. Its confirmed 8 MHz S08 core can execute deterministic sequencing logic without implying suitability for heavy computation. The 32-LQFP package provides more physical connection capacity than a minimal eight-pin MCU, but the actual I/O count and alternate functions must be verified from the official pin table. For industrial use, confirm operating temperature, supply range, EMC performance, and lifecycle status before production release.
おすすめ
Appliance Controller
An appliance control board can use the MC9S08RG60FJE for user-input handling, operating-state logic, timing, and communication coordination when its firmware remains within 60 KB of flash. The 8 MHz S08 processor is appropriate for straightforward control rather than graphics-intensive workloads. Because the supplied evidence does not identify RAM, timers, serial interfaces, or I/O levels, the design must be checked against motor, heater, mains, and user-interface requirements before schematic approval.
おすすめ
Sensor Interface Node
The MC9S08RG60FJE can serve as the local processor for a sensor node that converts inputs into status data, applies thresholds, and manages a downstream communication link. Its confirmed 60 KB flash provides a defined firmware ceiling, while the 8 MHz S08 core handles straightforward acquisition and control tasks. The supplied evidence does not list analog converters or communication peripherals, so engineers must verify signal conditioning, interface timing, RAM, and pin multiplexing in the official documentation.
おすすめ
Battery-Powered Monitor
A battery-powered monitor can use the MC9S08RG60FJE for periodic measurement, threshold evaluation, event logging, and low-duty-cycle control. Its 8 MHz S08 core is capable of routine embedded logic, but battery life depends on the unprovided sleep-mode currents, active current, and clock configuration. Validate those values in the official datasheet and calculate the duty cycle from the actual standby and active loads rather than assuming low power from the processor category.
おすすめ
Compact Automation Product
The MC9S08RG60FJE is a practical candidate for a compact automation product requiring local decision-making, nonvolatile firmware storage, and a surface-mount implementation. Firmware can coordinate digital I/O and simple timing functions from the confirmed 8 MHz operating point, provided memory and peripheral requirements fit the device. Its 32-LQFP package also requires adequate board area, fine-pitch assembly capability, and careful escape routing for power, ground, clock, programming, and communications.
おすすめ
Motor or Relay Sequencer
The MC9S08RG60FJE can implement timing and sequencing for a small motor, relay bank, or mixed electromechanical controller when the required interfaces are present. Its 8 MHz core is sufficient for many state machines and debounce routines, while 60 KB flash provides storage for control code and fixed tables. Before committing, verify output-driver current, timer resolution, protection features, isolation, flyback requirements, and thermal limits because none of those specifications appears in the supplied evidence.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08RG60FJE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
設計ノート
Do not finalize the power tree until the official MC9S08RG60FJE datasheet confirms supply voltage, I/O levels, reset requirements, and external-component recommendations. The supplied evidence does not include current consumption or decoupling requirements. Compare the board's worst-case supply tolerance and digital-interface levels against those limits before routing power pins.
Treat the 32-LQFP footprint as a fine-pitch assembly constraint. Preserve the manufacturer land pattern and pin-one orientation, inspect whether an exposed thermal pad is required, and route programming and debug signals away from noisy switching nodes. Pin names and alternate functions remain unverified because the provided evidence contains no official pin table.
Do not approve an MCU substitution from family name or processor speed alone. A drop-in candidate must reproduce the 32-LQFP land pattern, pin numbering, voltage domain, reset behavior, clocking, memory-map expectations, and required peripherals. Firmware also needs interrupt-vector, timing, driver, and boot-code review because a physically similar MCU may require software migration.
コンプライアンス情報
No compliance declarations for the exact MPN appear in the supplied verified data. AEC-Q100 status also uses unknown rather than a qualification claim because the evidence does not identify an automotive-qualified variant.