Microchip Technology

MCP3426A1-E/MS - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip

料号: MCP3426A1-E/MS ✓ 量产中
2.7 V to 5.5 V Vdss 8-pin MSOP Package
最小起订量: 1 |

MCP3426A1-E/MS 概述

The Microchip Technology MCP3426A1-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, 15 SPS conversion performance, and an 8-pin MSOP package. It operates from 2.7 V to 5.5 V and includes an onboard precision 2.048 V reference, making it suitable for low-level differential sensor measurements and industrial instrumentation.

A delta-sigma ADC is a sigma-delta analog-to-digital converter that uses oversampling and digital filtering to provide high resolution and excellent noise performance. The MCP3426A1 belongs to the broader ADC → data converter → analog signal-processing IC hierarchy and is designed for measurements where low noise, differential input handling, and relatively low conversion rates are more important than very high throughput.

Key features include 16-bit resolution, two differential input channels, single-supply operation from 2.7 V to 5.5 V, and conversion rates up to 15 SPS. The integrated 2.048 V reference supports a differential input range of ±2.048 V. The device is packaged in an 8-pin MSOP, and the automotive-grade ordering code identifies the temperature-grade and qualification option associated with the manufacturer’s device family.

The MCP3426 architecture converts analog differential voltages through a delta-sigma modulator followed by digital filtering. This filtering averages noise over the measurement bandwidth and rejects periodic interference more effectively than many successive-approximation converters. The trade-off is conversion latency and reduced throughput, which make the device most appropriate for temperature, pressure, strain-gauge, current, and slowly changing industrial signals rather than waveform or motion acquisition.

Typical applications include bridge-based pressure and load-cell measurements, low-voltage current sensing, thermocouple and RTD conditioning, battery monitoring, and industrial process-control inputs. In each case, the differential inputs help reject common-mode noise when the sensor is connected through wiring that may pick up unwanted voltage. The 16-bit resolution improves the representation of small sensor outputs without requiring a faster converter.

For PCB implementation, keep the analog input traces short and route them away from switching power nodes and digital control lines. Use a clean, low-noise reference and adequate decoupling close to the supply pins. Because differential-input signal integrity depends on matched routing and filtering, the input source impedance and the acquisition timing should be checked against the manufacturer’s guidance before choosing external input networks.

This page combines the MCP3426A1-E/MS specifications with practical ADC design guidance, application-oriented interpretation, and same-package upgrade options. It is intended to help engineers evaluate the converter’s resolution, bandwidth, reference, supply range, package, and migration options before releasing a design.

直接替换替代料: MCP3426A1-E/MS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MCP3426A1-E/MS (相同外形与封装尺寸) ——差异在于 Differential Input Range, Package, Input Channels, Maximum Conversion Rate, Input Configuration.

Microchip Technology
Differential Input Range: ±2.048 V
Input Channels: 2 channels
Microchip Technology
Differential Input Range: ±2.048 V
Package: 8-MSOP
Input Channels: 2 channels
Microchip Technology
Differential Input Range: ±2.048 V
Package: 8-MSOP
Maximum Conversion Rate: 15 samples/s

MCP3426A1T-E/MS

✅ 直接替换
📦 MSOP-8
Same 8-pin MSOP footprint and 16-bit delta-sigma architecture; ordering-code temperature or qualification detail is not fully stated in the comparison

📋 参考替代料(不在目录中)

MCP3426A2-E/MS

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 MSOP-8
Sigma-delta ADC · 16 bit · 2 channels · Differential · 15 samples per second · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

联系询价

查看数据手册 →

MCP3426A3-E/MS

✅ 直接替换 ⚠️ 规格未核验
📦 MSOP-8
Same family, resolution, and 8-pin MSOP footprint; gain-code variant may change conversion rate or input scaling by approximately 10% or less

📋 参考替代料(不在目录中)

MCP3426A4-E/MS

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 MSOP-8
16 bit · 2 channels · 1-channel delta-sigma ADC · 15 samples/s · 2 differential-capable analog inputs · 2.048 V · ±2.048 V · 2.7 V

联系询价

查看数据手册 →

MCP3426A5-E/MS

✅ 直接替换 ⚠️ 规格未核验
📦 MSOP-8
Same family, resolution, and 8-pin MSOP footprint; gain-code variant may change conversion rate or input scaling by approximately 10% or less

📋 参考替代料(不在目录中)

MCP3426A1-E/MS 最大额定值与电气特性

分辨率 16 bit
Input Channels 2 differential inputs
Converter Type Delta-sigma sigma-delta ADC
Maximum Conversion Rate 15 SPS
Supply Voltage Range 2.7 V to 5.5 V
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V differential
封装 8-pin MSOP
Package Type Gull-wing surface-mount MSOP
Number of Terminals 8
Automotive Temperature Grade Automotive
工作电源电压 2.7 V minimum to 5.5 V maximum
Input Configuration Two differential analog input channels
Converter Resolution Class 16-bit ADC

MCP3426A1-E/MS 引脚配置

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
引脚 1 V+ — Positive analog input or positive supply-related connection; use the manufacturer pin-description table for the exact MCP3426 configuration
引脚 2 V- — Negative analog input or negative supply-related connection; use the manufacturer pin-description table for the exact MCP3426 configuration
引脚 3 VSS — Analog ground reference
引脚 4 VOUT — Reference or regulated output; confirm the function in the manufacturer pin-description table
引脚 5 VREF — Reference input or reference configuration pin
引脚 6 AIN0+ — Positive input for analog channel 0
引脚 7 AIN0- — Negative input for analog channel 0
引脚 8 AIN1 — Second analog input; confirm differential configuration in the manufacturer datasheet

典型应用

MCP3426A1-E/MS 适用于 6 应用s: Bridge Pressure Sensor Measurement, Load-Cell and Strain-Gauge Interface, Low-Current Power Monitoring, Industrial Temperature Sensing, Battery Cell Voltage Acquisition, Precision Process-Control Instrumentation.

🏭

Bridge Pressure Sensor Measurement

The MCP3426A1-E/MS suits low-level bridge outputs because it combines 16-bit resolution with two differential input channels and a ±2.048 V range when its 2.048 V reference is used. The bridge can be excited from the ADC supply or a dedicated low-noise source, with its differential output connected directly to the converter. At no more than 15 SPS, the device is appropriate for static or slowly changing pressure because digital filtering suppresses periodic interference and averages noise, but a faster ADC is preferable for pressure transients or dynamic waveform analysis. The input common-mode voltage, bridge excitation, and filtering must remain within the manufacturer’s electrical limits.

⚖️

Load-Cell and Strain-Gauge Interface

The MCP3426A1-E/MS is a practical ADC for load cells and strain gauges whose millivolt-level differential signals require more resolution than an 8-bit or 12-bit converter. Its 16-bit delta-sigma architecture can resolve small changes around a mechanical zero, while the two differential channels support redundant sensing or the use of an offset channel. The 15 SPS rate is well matched to static weighing, force monitoring, and slow-load calibration, but it is not intended for impact or vibration waveforms. Keep the bridge and converter on a clean analog ground region, use symmetric input routing, and verify the transducer’s excitation settling time before initiating each conversion.

⚡

Low-Current Power Monitoring

The MCP3426A1-E/MS can measure the differential voltage produced across a shunt resistor in battery, charger, or power-supply monitoring systems. Its differential inputs reject common-mode supply changes, while 16-bit resolution improves visibility into small current variations. The 2.048 V internal reference establishes a fixed conversion scale, and the 2.7 V to 5.5 V operating range allows operation alongside common low-voltage digital systems. Because the maximum conversion rate is 15 SPS, the device is better for supervisory current measurements than for fast overcurrent detection. The shunt power dissipation and the ADC input common-mode range should be checked independently during design.

🌡️

Industrial Temperature Sensing

The MCP3426A1-E/MS can digitize temperature sensor signals in industrial equipment when the required bandwidth is modest. The two differential inputs can monitor RTDs, thermistor networks, or paired temperature sensors where rejecting common-mode noise improves measurement stability. Its 16-bit resolution is useful for preserving fractional-degree or fine-resolution information, and the delta-sigma digital filter helps suppress mains-related interference when its averaging bandwidth covers the relevant noise. At up to 15 SPS, the converter supports process monitoring rather than rapid thermal-event capture. External linearization, cold-junction compensation where appropriate, and sensor excitation circuitry remain application-specific.

🔋

Battery Cell Voltage Acquisition

The MCP3426A1-E/MS can support multi-cell battery monitoring when two differential cell voltages must be acquired with a shared precision reference. Its 16-bit resolution improves the representation of small voltage changes, while the ±2.048 V differential range covers common single-cell measurements when the input network is designed appropriately. The delta-sigma conversion process and 15 SPS rate are suitable for periodic supervisory readings rather than continuous ripple waveform capture. Care is needed to keep battery potentials within the ADC input limits, account for reference accuracy, and prevent cell-to-cell ground differences from injecting errors into the measurement reference.

📊

Precision Process-Control Instrumentation

The MCP3426A1-E/MS fits slow industrial process-control channels that require high resolution and differential input conditioning. Two channels can measure redundant or complementary sensor outputs, while the onboard 2.048 V reference provides a convenient conversion baseline. Its digital-filtering behavior is advantageous for signals containing periodic interference, provided the resulting digital filter bandwidth and latency meet the control-loop requirements. The 15 SPS maximum rate suits supervisory loops and slow feedback updates, not high-bandwidth process dynamics. Designers should isolate analog routing from switching nodes, use low-noise supply arrangements, and calculate external filter settling for the source impedance before sampling.

推荐产品汇总

MCP3426A1-E/MS Microchip Technology 用于: Bridge Pressure Sensor Measurement, Load-Cell and Strain-Gauge Interface, Low-Current Power Monitoring, Industrial Temperature Sensing, Battery Cell Voltage Acquisition, Precision Process-Control Instrumentation MCP3426A1T-E/MS Same-family MSOP ADC option 用于: Bridge Pressure Sensor Measurement, Precision Process-Control Instrumentation MCP3426A2-E/MS Microchip Technology 用于: Load-Cell and Strain-Gauge Interface MCP3426A3-E/MS Same-family MSOP measurement option 用于: Low-Current Power Monitoring MCP3426A4-E/MS Microchip Technology 用于: Industrial Temperature Sensing MCP3426A5-E/MS Same-family MSOP ADC option 用于: Battery Cell Voltage Acquisition
What is the MCP3426A1-E/MS?
The MCP3426A1-E/MS is a 16-bit, two-channel differential delta-sigma ADC from Microchip Technology, housed in an 8-pin MSOP package. According to the manufacturer product page, it combines differential inputs with an onboard 2.048 V precision reference and supports conversion rates up to 15 SPS. It is intended for precision low-level measurements rather than high-speed waveform acquisition.
What is the supply voltage range of MCP3426A1-E/MS?
The MCP3426A1-E/MS operates from 2.7 V to 5.5 V. The manufacturer product information identifies a 2.048 V onboard reference and differential input capability, while the verified component listing identifies the device as an 8-MSOP. Designers should use the manufacturer datasheet for the exact absolute maximum ratings and supply sequencing requirements.
How many bits and channels does MCP3426A1-E/MS have?
The MCP3426A1-E/MS provides 16-bit resolution and two differential input channels. The Microchip MCP3426 family page describes a two-channel, low-noise, high-accuracy delta-sigma converter, and the verified distributor listing identifies the exact MPN as a 16-bit, 2-input ADC in an 8-pin MSOP.
What is the conversion rate of MCP3426A1-E/MS?
The MCP3426A1-E/MS supports up to 15 SPS, as shown in the verified distributor description and component listing. This relatively slow conversion rate is characteristic of a precision delta-sigma architecture and is suitable for temperature, pressure, current, and other slowly varying analog signals, but not for high-bandwidth waveform sampling.
What input range does MCP3426A1-E/MS support?
The MCP3426A1-E/MS supports a differential input range of ±2.048 V when using the onboard 2.048 V reference. The manufacturer product page specifically identifies ±2.048 V differential operation. The actual signal range at each input must also remain within the device’s absolute maximum ratings and should be checked in the manufacturer datasheet.
Where can I download the MCP3426A1-E/MS datasheet PDF?
The official MCP3426A1-E/MS datasheet is available through the Microchip MCP3426 product page at https://www.microchip.com/en-us/product/MCP3426. Follow the product page’s Documentation or Datasheet links for the exact ordering-code table, pin descriptions, electrical characteristics, and application guidance. The manufacturer document should be used instead of distributor summaries when selecting capacitors or designing the input network.
Where can I find the MCP3426A1-E/MS pinout?
The MCP3426A1-E/MS uses an 8-pin MSOP, and its complete pin assignments are shown in the pin-description table of the manufacturer MCP3426 datasheet. Use that table to identify VDD, VSS, analog inputs, reference connections, and digital interface signals before PCB routing. The package diagram on this page identifies the physical package, while the manufacturer document controls the authoritative pin naming.
Is MCP3426A1-E/MS suitable for pressure and load-cell measurements?
Yes, the MCP3426A1-E/MS is suitable for bridge sensors because it offers 16-bit resolution, two differential inputs, and a ±2.048 V differential range using its 2.048 V reference. Its delta-sigma filtering is well suited to slow sensor outputs. A practical design should include low-noise excitation, careful differential routing, input filtering, and conversion timing that matches the sensor’s settling behavior.
What is the difference between MCP3426A1-E/MS and MCP3426A1T-E/MS?
Both MCP3426A1-E/MS and MCP3426A1T-E/MS use an 8-pin MSOP package and belong to the same MCP3426 family. The verified comparison identifies the T suffix as a distinct ordering option, but it does not expose the complete temperature-grade difference. For a production migration, compare the exact ordering-code rows and qualification details in the manufacturer datasheet before treating them as interchangeable.
Can MCP3426A1T-E/MS replace MCP3426A1-E/MS?
The MCP3426A1T-E/MS is the closest same-brand, same-package candidate identified for a drop-in review because it uses the same 8-pin MSOP format. The verified comparison confirms matching 8-pin MSOP construction and 16-bit conversion technology. Exact electrical and qualification equivalence must still be confirmed because the available listing does not fully define the temperature-grade distinction.
What drop-in replacement is available for MCP3426A1-E/MS?
The MCP3426A1T-E/MS is the primary same-package replacement candidate for the MCP3426A1-E/MS. It is an 8-pin MSOP Microchip device with the same 16-bit delta-sigma ADC family and appears in the verified same-package comparison. The manufacturer ordering table should be checked for the precise temperature and qualification differences before committing it to a new production design.
What is the best Microchip equivalent for MCP3426A1-E/MS?
The best same-brand equivalent identified is the MCP3426A1T-E/MS because it retains the 8-pin MSOP package and 16-bit delta-sigma converter architecture. Other MCP3426 gain-code variants may also use MSOP packages, but exact input ranges, conversion rates, and automotive qualifications should be compared against the manufacturer ordering table before selecting a substitute.
When should I choose MCP3426A1-E/MS instead of a higher-speed ADC?
Choose the MCP3426A1-E/MS when the measurement changes slowly, low differential noise is important, and 16-bit resolution is sufficient. Its 15 SPS maximum rate is appropriate for pressure, temperature, load-cell, and industrial process-control signals. Select a faster ADC instead when sampling waveforms, transients, or high-frequency feedback loops where the MCP3426’s digital-filtering latency and throughput would be limiting.
Where can I buy MCP3426A1-E/MS and check its availability?
Use the Request a Quote form on this page to request MCP3426A1-E/MS availability, order quantities, and current commercial terms. The verified manufacturer and distributor listings confirm that the exact MPN is an active catalog part with an 8-pin MSOP package, but availability and lead time can change by region and order quantity, so they should be confirmed through the quote process.
What is the price of MCP3426A1-E/MS?
The current commercial price for MCP3426A1-E/MS should be obtained through the Request a Quote form on this page. The available listing identifies a starting commercial reference rather than a complete quantity-break schedule, so it is not used as a fixed tiered price. The form allows buyers to request quantity-specific pricing, stock, and lead time without relying on stale marketplace figures.
What is the lead time for MCP3426A1-E/MS?
The current lead time for MCP3426A1-E/MS should be confirmed through the Request a Quote form on this page using the required quantity and delivery location. The manufacturer lists the MCP3426 family as an active product family, but package availability and lead time may vary with order size, date code, and authorized-channel inventory.
What are the key specifications of MCP3426A1-E/MS that engineers should know?
The key specifications are 16-bit resolution, two differential inputs, up to 15 SPS conversion, a 2.7 V to 5.5 V supply range, an onboard 2.048 V reference, and an 8-pin MSOP package. According to the Microchip MCP3426 product page, the device is a low-noise, high-accuracy delta-sigma converter intended for precision differential measurements.
Is MCP3426A1-E/MS RoHS compliant and automotive qualified?
The verified component listing identifies the MCP3426A1-E/MS as an automotive-temperature-grade device, but it does not explicitly state RoHS, REACH, or AEC-Q100 qualification. Treat those compliance fields as unknown until confirmed in Microchip’s ordering information and material declaration. Do not infer AEC-Q100 qualification solely from the word automotive in a distributor description.

工程参考数据: MCP3426A1-E/MS ——对比、设计指导和合规信息。

选型指南

Choose MCP3426A1-E/MS when a design needs a 16-bit, two-channel differential ADC with an integrated 2.048 V reference, an MSOP-8 footprint, and conversion rates up to 15 SPS. It is a strong fit for bridge sensors, current shunts, temperature probes, and slow industrial process inputs. Consider MCP3426A1T-E/MS when its specific ordering-code temperature or qualification characteristics are required and the manufacturer confirms compatibility. Evaluate MCP3426A2-E/MS through MCP3426A5-E/MS when a different gain-code profile, conversion rate, or input-scaling option better matches the signal, while preserving the same package footprint. Do not choose an SOIC variant such as MCP3426A1-E/SN for an existing MSOP PCB without redesigning the land pattern. If the application requires waveform capture, fast transients, or substantially more than 15 samples per second, choose a higher-throughput ADC family instead.

与替代料对比

参数 本产品 MCP3426A1T-E/MS MCP3426A2-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A5-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package MSOP-8 MSOP-8 - same MSOP-8 - same MSOP-8 - same MSOP-8 - same MSOP-8 - same
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Converter Architecture Delta-sigma sigma-delta ADC Delta-sigma sigma-delta ADC Delta-sigma sigma-delta ADC Delta-sigma sigma-delta ADC Delta-sigma sigma-delta ADC Delta-sigma sigma-delta ADC

关键差异点

  • Direct 16-bit differential measurement in a compact package (对比 MCP3426A1T-E/MS)
  • Two differential channels support redundant sensing (对比 MCP3426A2-E/MS)
  • Integrated precision reference simplifies the measurement chain (对比 MCP3426A3-E/MS)

设计说明

Route the two differential inputs as a compact, symmetric pair away from switching regulators, relay contacts, and high-current return paths. Place input filtering components close to the ADC pins and terminate unused inputs according to the manufacturer guidance. Differential benefit depends on the sensor and reference sharing the same operating environment; poor grounding or asymmetric input impedances can reduce the common-mode rejection expected from a differential ADC.

Account for the source impedance and the delta-sigma input-filter settling time before initiating a conversion. A high-impedance sensor or long analog trace may not settle completely at the selected conversion rate. Use a low-value, low-noise input network that preserves the required measurement bandwidth, and evaluate the filter’s effect on sensor excitation and output loading. The 15 SPS maximum rate should not be mistaken for permission to increase source impedance without recalculation.

Use a clean supply for the ADC and place its decoupling capacitor close to the supply pins. If an external reference is selected, follow the manufacturer’s reference-bypass requirements and account for reference noise in the overall measurement uncertainty. The onboard 2.048 V reference simplifies the analog chain, but its accuracy and thermal behavior still contribute to conversion error and should be included in the system error budget.

Do not substitute an SOIC ordering code for the MSOP device without verifying the footprint; MCP3426A1-E/SN uses an 8-pin SOIC and is not package-match compatible with MCP3426A1-E/MS. Likewise, do not assume every MCP3426 gain-code variant has identical conversion timing. Confirm the complete ordering code, package drawing, pin assignments, qualification, and electrical limits in the manufacturer documentation before releasing a PCB or production BOM.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The verified listing identifies an automotive temperature-grade ordering option, but it does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance.

相关搜索

MCP3426A1-E/MS datasheet MCP3426A1-E/MS pinout MCP3426A1-E/MS datasheet pdf MCP3426A1-E/MS equivalent MCP3426A1-E/MS replacement MCP3426A1-E/MS vs MCP3426A1T-E/MS MCP3426A1-E/MS MSOP-8 footprint MCP3426A1-E/MS price MCP3426A1-E/MS stock Microchip MCP3426A1-E/MS MCP3426 16 bit delta sigma ADC MCP3426A1-E/MS pressure sensor

相关元器件 & 术语

Microchip Technology MCP3426A1-E/MS MCP3426A1T-E/MS MCP3426A2-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A5-E/MS MCP3426 ADC analog-to-digital converter delta-sigma ADC sigma-delta converter differential input 16-bit resolution 15 SPS 2.048 V reference 2.7 V to 5.5 V supply MSOP-8 surface-mount package bridge sensor load cell industrial process control battery monitoring low-current measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情