Microchip Technology

MCP3562RT-E/NC - 24-Bit 153.6kSPS ADC | Microchip

料号: MCP3562RT-E/NC ✓ 量产中
3 V Vdss 20-pin UQFN, 3 x 3 mm Package
最小起订量: 1 |

MCP3562RT-E/NC 概述

Microchip Technology MCP3562RT-E/NC is a low-noise, 24-bit delta-sigma analog-to-digital converter with four single-ended or two differential input channels, a maximum programmable data rate of 153.6 kSPS, an internal voltage reference, and a 20-pin UQFN package measuring 3 x 3 mm. The device supports serial digital communication through an SPI-compatible interface and operates from a 3 V supply.

An analog-to-digital converter, or ADC, converts continuously varying analog voltages into digital values that a microcontroller or other digital controller can process. The MCP3562RT-E/NC belongs to the delta-sigma ADC class, where an internal modulator and digital filtering extract a precise conversion result from a sampled input. Within the broader hierarchy of ADC > data converter > analog signal-conditioning IC > semiconductor, it is designed for compact systems requiring high resolution and multiple analog inputs.

Key features include 24-bit resolution, four single-ended or two differential inputs, and a maximum conversion rate of 153.6 kSPS. The internal voltage reference reduces the number of external precision components, while the small 20-pin UQFN package supports space-constrained PCB layouts. The operating temperature range is -40°C to +85°C, making the device suitable for industrial and instrumentation environments when system-level requirements remain within that range.

Its delta-sigma architecture is particularly appropriate for sensor signals, process-control measurements, and other applications where high resolution and effective noise filtering are more important than very high conversion latency. The manufacturer identifies MCP3562R as the preferred pin-compatible option for new designs because that family includes the onboard voltage reference. The MCP3562RT-E/NC combines that reference with four single-ended or two differential input channels in a compact surface-mount package.

Typical uses include precision temperature and pressure monitoring, industrial sensor acquisition, laboratory instrumentation, and low-frequency energy or power measurements. Four single-ended inputs permit several sensor signals to be multiplexed into one converter, while the differential configuration supports differential sensors and rejects common-mode noise when implemented with suitable input circuitry.

When laying out the PCB, place the reference and input-network components close to their associated pins, provide a clean low-noise supply, and follow the manufacturer layout guidance for the exposed pad. Verify the selected input topology, common-mode range, data rate, and digital interface timing before fixing the system sampling strategy. The conversion-speed setting also affects digital filtering and effective noise performance.

This product page combines the manufacturer’s device description with package, interface, conversion, and environmental characteristics, then adds application guidance, comparison details, and practical design considerations for engineers evaluating the MCP3562RT-E/NC as a compact, low-noise 24-bit ADC.

直接替换替代料: MCP3562RT-E/NC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MCP3562RT-E/NC (相同外形与封装尺寸) ——差异在于 Internal Reference, Resolution.

Microchip Technology
Internal Reference: Not included; external reference required
Resolution: 24 bits

MCP3562T-E/NC

✅ 直接替换
Microchip Technology
📦 20-pin UQFN, 3 x 3 mm
24-bit delta-sigma analog-to-digital converter · 24 bits · 153.6 kSPS · 2 differential inputs or 4 single-ended inputs · 2 differential / 4 single-ended · 3 V · Sigma-delta · 20-pin UQFN, 3 x 3 mm

联系询价

查看数据手册 →

MCP3562RT-E/NC 最大额定值与电气特性

Converter Type 24-bit delta-sigma ADC
分辨率 24 bit
Maximum Data Rate 153.6 kSPS
Input Configuration 4 single-ended or 2 differential input channels
Internal Reference Yes
电源电压 3 V
Digital Interface SPI
封装 20-pin UQFN, 3 x 3 mm
安装类型 Surface mount
工作温度范围 -40°C to +85°C

MCP3562RT-E/NC 20-pin uqfn, 3 x 3 mm 引脚配置指南

MCP3562RT-E/NC(20-pin uqfn, 3 x 3 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

MCP3562RT-E/NC 的 20-pin uqfn, 3 x 3 mm 封装引脚图

暂无详细引脚数据: MCP3562RT-E/NC.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MCP3562RT-E/NC 适用于 6 应用s: Industrial Sensor Acquisition, Precision Temperature Monitoring, Pressure and Load Measurement, Laboratory Instrumentation, Battery-Powered Monitoring, Process Control Monitoring.

🏭

Industrial Sensor Acquisition

The MCP3562RT-E/NC fits compact industrial sensor modules that require several measurement channels without allocating space for a large converter package. Four single-ended inputs can serve grounded temperature, pressure, or level sensors, while two differential inputs support bridge or other differential sources. The 24-bit resolution and programmable data rate up to 153.6 kSPS provide flexibility between resolution and acquisition speed. Its internal reference and 3 V operation reduce supporting circuitry, while the -40°C to +85°C rating supports industrial environments. The signal chain still requires suitable input protection, filtering, grounding, and verification that each sensor signal remains within the selected input range.

🌡️

Precision Temperature Monitoring

A precision temperature-control system can use the MCP3562RT-E/NC to digitize thermocouple, RTD, or thermistor signals with its four single-ended inputs. The 24-bit resolution is useful when temperature stability and low-level resolution are more important than extremely rapid sampling, and the maximum programmable rate of 153.6 kSPS provides additional timing flexibility. The internal reference simplifies the measurement subsystem, while the 20-pin UQFN package preserves board area. For best performance, use low-noise input conditioning, isolate sensitive sensor wiring from switching nodes, and calibrate the complete channel rather than relying only on converter resolution.

📊

Pressure and Load Measurement

The MCP3562RT-E/NC is suitable for pressure, load-cell, and force measurements where the analog signal is relatively small and high-resolution conversion is valuable. Two differential channels can accept complementary outputs from suitable sensors, while the four single-ended configuration can support other analog channels in the same enclosure. The device’s 24-bit resolution can preserve fine measurement detail, and its internal reference reduces the complexity of the reference network. Differential input layout, common-mode voltage, sensor excitation stability, shielding, and digital filtering determine whether the system achieves the intended accuracy; these considerations are more important than converter resolution alone.

🔬

Laboratory Instrumentation

Laboratory instruments often combine multiple low-frequency analog channels with the need for a compact, high-resolution front end. The MCP3562RT-E/NC provides four single-ended or two differential inputs, 24-bit resolution, a programmable data rate up to 153.6 kSPS, and a 3 V operating point in a 3 x 3 mm UQFN package. This leaves more PCB area for signal conditioning, isolation, or communications. Designers should select an appropriate data rate because changing conversion speed can change digital filtering and noise behavior, and should verify the input range and acquisition sequence against the instrument’s measurement specification.

🔋

Battery-Powered Monitoring

A battery-powered environmental or asset monitor can use the MCP3562RT-E/NC to digitize several slowly changing sensor outputs within a compact 3 V design. Four single-ended channels suit voltage-divider-based sensors, and the two differential configuration can improve common-mode rejection for suitable signals. The internal reference and small package reduce component count and board area, while the broad 153.6 kSPS programmable-rate range permits the designer to choose an appropriate acquisition profile. Low-energy designs should consider the actual conversion current and standby behavior from the datasheet, disable unused channels where supported, and avoid powering continuously when periodic sampling is sufficient.

⚙️

Process Control Monitoring

The MCP3562RT-E/NC can serve as the measurement section of a process-control board that monitors pressure, flow, level, or other slow analog process variables. Its 24-bit delta-sigma architecture is suited to high-resolution measurements, and the four single-ended or two differential channels provide flexibility for several sensors. A maximum programmable data rate of 153.6 kSPS leaves room for different control-loop update requirements. For reliable operation, keep the converter away from high-current switching paths, provide clean supply decoupling, establish defined analog grounding, and calibrate offset and gain after thermal stabilization. Protection and isolation requirements depend on the process environment and wiring length.

What are the key specifications of MCP3562RT-E/NC that engineers should know?
The MCP3562RT-E/NC is a 24-bit delta-sigma ADC with four single-ended or two differential inputs and a maximum programmable data rate of 153.6 kSPS. According to the Microchip product page, it operates from 3 V, includes an internal voltage reference, uses an SPI serial interface, and is offered in a 20-pin 3 x 3 mm UQFN package. Its stated operating-temperature range is -40°C to +85°C.
Where can I download the MCP3562RT-E/NC datasheet PDF?
The official MCP3562RT-E/NC documentation is available through the Microchip MCP3562R product page at https://www.microchip.com/en-us/product/MCP3562R. Open the page and select the datasheet or documentation link for the exact ordering code. The manufacturer identifies MCP3562R as the preferred pin-compatible family for new designs and notes that the R version includes an onboard voltage reference.
Where can I find the MCP3562RT-E/NC pinout?
Use the pin-description table and land-pattern information in the Microchip MCP3562R datasheet for the final assignment of MCP3562RT-E/NC pins. The device is supplied in a 20-pin UQFN package with a 3 x 3 mm body and an exposed pad. Confirm the ordering-code suffix, exposed-pad connection, analog inputs, supply pins, and serial interface signals before laying out the board.
What can replace MCP3562RT-E/NC on the same PCB footprint?
The closest documented same-package option is the Microchip MCP3562T-E/NC, which also appears in a 20-pin 3 x 3 mm UQFN package. However, its listing identifies a one-sigma-delta implementation rather than the target’s two-sigma-delta architecture. Confirm every pin function and performance requirement in the manufacturer documentation before treating it as a drop-in replacement for an existing design.
Is MCP3562RT-E/NC the same as MCP3562T-E/NC?
No. MCP3562RT-E/NC is identified as a two-sigma-delta converter with four single-ended or two differential inputs, while MCP3562T-E/NC is listed as a one-sigma-delta converter with the same four-input or two-channel arrangement and the same 20-pin UQFN package. Their common package does not prove identical conversion performance, so firmware, filtering, timing, and accuracy changes must be reviewed.
MCP3562RT-E/NC vs MCP3562T-E/NC: which converter is better for precision sensing?
Choose MCP3562RT-E/NC when its two-sigma-delta implementation is required by the signal chain or established firmware. Both devices are listed as 24-bit ADCs with four single-ended or two differential channels in a 20-pin UQFN package, but MCP3562T-E/NC is identified as a one-sigma-delta implementation. The correct choice depends on verified accuracy, noise, timing, and interface behavior for the intended application.
When should I choose MCP3562RT-E/NC over another 24-bit delta-sigma ADC?
Choose MCP3562RT-E/NC when the design benefits from a 24-bit delta-sigma converter with four single-ended or two differential inputs, an internal reference, a maximum data rate of 153.6 kSPS, and a compact 20-pin UQFN package. It is particularly relevant for compact sensor-acquisition equipment where several analog inputs, low noise, and a 3 V supply are priorities.
Is MCP3562RT-E/NC suitable for industrial sensor acquisition?
The MCP3562RT-E/NC is suitable for industrial sensor acquisition when the complete system remains within the device’s stated -40°C to +85°C operating range. Its four single-ended or two differential inputs, 24-bit resolution, internal reference, and programmable rate up to 153.6 kSPS support precision measurement systems. Final suitability also depends on sensor ranges, common-mode limits, isolation, calibration, and enclosure requirements.
Where can I buy MCP3562RT-E/NC online?
Use the Request a Quote form on this page to request MCP3562RT-E/NC pricing, availability, and order handling. The device is offered as a tape-and-reel 20-pin UQFN part, but current stock and lead time should be confirmed through that form. The visible structured pricing area can then reflect any qualified commercial offer without relying on an outdated static listing.
What is the price of MCP3562RT-E/NC?
The current commercial price for MCP3562RT-E/NC should be requested through the Request a Quote form on this page. Pricing can vary with quantity, package quantity, sourcing condition, and market availability, so a listing value may not reflect the quantity needed for production. The form allows the order quantity and requested delivery information to be considered together.
What is the lead time for MCP3562RT-E/NC?
The current MCP3562RT-E/NC lead time should be confirmed through the Request a Quote form on this page. The manufacturer identifies MCP3562R as the preferred pin-compatible option for new designs, which supports long-term design planning, but manufacturing allocation and shipment timing still depend on order quantity and current supply status. Ask the quote desk for the schedule tied to your production plan.
Is MCP3562RT-E/NC in stock?
Use the Request a Quote form on this page to check current MCP3562RT-E/NC availability for your required quantity. The part is specified as a tape-and-reel ordering option, but inventory can vary by package quantity and fulfillment schedule. Confirm quantity, delivery destination, and expected shipment date when requesting the quote.
What is the best Microchip equivalent for MCP3562RT-E/NC?
The closest documented Microchip equivalent is MCP3562T-E/NC because both are listed as 24-bit, four-input converters in a 20-pin 3 x 3 mm UQFN package. The key difference is that the target uses two sigma-delta paths while MCP3562T-E/NC is described with one. Treat it as a conditional hardware replacement and verify pinout, timing, filtering, and accuracy before approval.
How does the MCP3562RT-E/NC internal voltage reference help a design?
The internal voltage reference removes the need for a separate reference source in the basic conversion circuit, simplifying the bill of materials and reducing board area. The manufacturer specifically identifies MCP3562R as the preferred family for new designs because the R version includes the onboard reference. Users still need to follow the datasheet’s reference layout and decoupling requirements for low-noise performance.
Does the MCP3562RT-E/NC support single-ended and differential measurements?
Yes. The MCP3562RT-E/NC supports four single-ended or two differential input channels. This dual arrangement lets a design use two differential sensors or route four grounded sensor signals, depending on the selected input configuration. The analog front end must respect the device’s input and common-mode limits, and the system should verify the configured channel sequence and conversion timing.

工程参考数据: MCP3562RT-E/NC ——对比、设计指导和合规信息。

选型指南

Choose MCP3562RT-E/NC for compact precision-measurement designs that require 24-bit delta-sigma conversion, four single-ended or two differential inputs, an internal voltage reference, SPI communication, and a 3 V supply. MCP3562T-E/NC is the closest documented same-package alternative when its one-sigma-delta implementation satisfies the accuracy, noise, filtering, and timing requirements of the application. It should be treated as a conditional replacement rather than an automatic substitution because converter-path count differs by one. For new layouts, confirm the MCP3562R-family pin assignments, package land pattern, exposed-pad connection, and acquisition timing directly from Microchip documentation. Choose a different converter when the design needs more than four inputs, a different maximum data rate, an unlisted accuracy class, or a package that cannot be accommodated by the existing board.

与替代料对比

参数 本产品 MCP3562T-E/NC
Brand Microchip Technology Microchip Technology
Package 20-pin UQFN, 3 x 3 mm 20-pin UQFN, 3 x 3 mm
Converter Type Delta-sigma ADC Delta-sigma ADC
Resolution 24 bit 24 bit
Input Configuration 4 single-ended or 2 differential input channels 4 single-ended or 2 differential input channels
Sigma-Delta Paths 2 1

关键差异点

  • Higher converter-path count within the same documented package family (对比 MCP3562T-E/NC)
  • Four single-ended or two differential measurement inputs (对比 MCP3562T-E/NC)
  • Compact integration in a 3 V system (对比 MCP3562T-E/NC)

设计说明

Use the manufacturer land pattern and exposed-pad instructions for the 20-pin UQFN package. Place the input and reference-network components close to their associated pins, keep sensitive analog traces short, and provide the supply-decoupling network specified in the datasheet. The exposed pad normally requires a continuous ground connection and an appropriate via arrangement, but the final pattern must follow the official package drawing.

Separate analog input routing from digital clock and SPI traces, particularly when converting low-level sensor signals. Use a compact, low-noise ground return and place analog filtering near the converter rather than allowing long traces to collect noise. Differential inputs need matched, carefully routed connections, and single-ended systems require particular attention to grounding and supply-return paths to prevent converter error from appearing as sensor variation.

Do not treat the 24-bit resolution label as the guaranteed effective accuracy of the complete measurement chain. Reference noise, input noise, offset error, gain error, common-mode range, data rate, filtering, sensor excitation, and PCB leakage all affect the final result. Verify the operating mode, conversion timing, channel sequence, and analog limits in the manufacturer documentation, then calibrate the assembled system under its actual operating conditions.

The MCP3562RT-E/NC operates from a 3 V supply, but the converter still requires a clean low-noise rail. Route the analog supply through the decoupling arrangement in the datasheet and keep switching-regulator nodes and high-current return paths away from the reference and input network. If the device shares a supply with digital or switching circuitry, evaluate supply ripple at the ADC pins rather than assuming a nominal 3 V rail is adequate.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product-page material does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this ordering code.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MCP3562RT-E/NC datasheet MCP3562RT-E/NC pinout MCP3562RT-E/NC datasheet pdf MCP3562RT-E/NC equivalent MCP3562RT-E/NC replacement MCP3562RT-E/NC cross reference MCP3562RT-E/NC price MCP3562RT-E/NC stock MCP3562RT-E/NC vs MCP3562T-E/NC Microchip MCP3562RT-E/NC MCP3562RT-E/NC footprint MCP3562RT-E/NC application circuit

相关元器件 & 术语

Microchip Technology MCP3562RT-E/NC MCP3562R MCP3562T-E/NC MCP3561R MCP3564R 24-bit ADC delta-sigma ADC analog-to-digital converter data converter analog signal-conditioning IC semiconductor SPI internal voltage reference single-ended input differential input 153.6 kSPS 20-pin UQFN 3 x 3 mm package surface-mount package sensor acquisition industrial instrumentation process monitoring 3 V supply temperature measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情