MK53DN512ZCMD10 - Kinetis K50 Cortex-M4 100MHz MCU | NXP
料号： MK53DN512ZCMD10 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.25 | $112.50 |
| 100 | $10.1 | $1,010.00 |
| 500 | $9.1 | $4,550.00 |
| 1,000 | $8.2 | $8,200.00 |
MK53DN512ZCMD10 概述
A microcontroller unit (MCU) is a single-chip embedded computer that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on one die. Within the embedded systems hierarchy, the MK53DN512ZCMD10 sits in the Kinetis K5x measurement family (also referenced as the K50 series), a family distinguished by its integrated segment LCD controller and analog measurement peripherals, positioned above general-purpose Kinetis K1x/K2x parts and below the high-performance K6x/K7x tiers.
Key features include the 100 MHz Cortex-M4 core with hardware FPU and DSP instructions, 512 KB of flash for program storage, an integrated segment LCD controller (the defining 'MED LCD' feature of this ordering code), and flexible 1.8 V / 2.5 V / 3.3 V operation that suits both battery-powered and industrial 3.3 V designs. The C temperature-grade code targets industrial operating ranges, and the MAPBGA ball-grid package provides high I/O density in a compact 13x13 mm footprint.
Technically, the device implements NXP/Freescale's Kinetis architecture built on the ARM Cortex-M4 with a Harvard bus structure, tightly coupled flash acceleration, and peripheral sets including serial interfaces (UART, SPI, I2C), timers, and the analog subsystem typical of the K5 measurement family. Per the NXP product page, the part is described as a 'Flexible 32-bit Arm Cortex-M4F MCU with 512 KB flash memory, floating-point unit and DSP acceleration for embedded applications.'
Typical applications include medical measurement instrumentation, industrial control panels with segment LCD displays, portable battery-operated meters, and building automation nodes - all use cases where an integrated LCD controller plus analog measurement peripherals reduce bill-of-material count.
Design consideration: because this part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate newer Kinetis successors; the MAPBGA package also requires controlled-impedance, fine-pitch BGA PCB fabrication.
This page synthesizes distributor listings, cross-reference comparisons, and lifecycle data not consolidated on the manufacturer page, with verified dates and drop-in alternatives.
直接替换替代料： MK53DN512ZCMD10 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MK53DN512ZCMD10 （相同外形与封装尺寸） ——差异在于 Package, USB, Mounting Type, Core Processor, Lifecycle Status.
快速对比工具——选择替代料号进行并排对比：
MK53DN512ZVMD10
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MK52DN512ZCMD10
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.15 / 个
查看数据手册 →MK40DN512ZVMD10
✅ 直接替换✓ 有现货
$8.38 / 个
查看数据手册 →MK60DN512ZVMD10
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$14.81 / 个
查看数据手册 →MK50DN512CLL10
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →MK53DN512ZCMD10 最大额定值与电气特性
| Core Processor | ARM Cortex-M4 (with FPU) |
| Core Size | 32-Bit |
| 最大时钟频率 | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Series | Kinetis K50 (K5x Measurement Series) |
| 电源电压 | 1.8 V / 2.5 V / 3.3 V |
| 封装 | 144-MAPBGA (13x13 mm) |
| Package Code | LFBGA / MAP-BGA |
| Number of Terminals | 144 |
| 安装类型 | Surface Mount |
| Terminal Form | BALL |
| Temperature Grade | INDUSTRIAL |
| Special Peripherals | Segment LCD controller |
| ECCN | 3A991.a.2 |
| 生命周期状态 | NRND (Not Recommended for New Designs) |
| 无卤 | Compliant |
| Packaging | Tray |
MK53DN512ZCMD10 lfbga / map-bga 引脚配置指南
MK53DN512ZCMD10（lfbga / map-bga 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MK53DN512ZCMD10.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MK53DN512ZCMD10 适用于 6 应用s: Medical Measurement Instrumentation, Industrial Control Panels with LCD, Portable Battery-Powered Meters, Building Automation and Sensor Nodes, Test and Measurement Equipment, Automotive-adjacent Diagnostic and Telematics Tools.
Medical Measurement Instrumentation
The Kinetis K50 measurement series was explicitly positioned for measurement applications, making the MK53DN512ZCMD10 a strong fit for glucose meters, patient monitors, and diagnostic panels. Its 100 MHz Cortex-M4 with hardware FPU executes FFT and filter routines on sampled analog data without an external DSP, while the integrated segment LCD controller directly drives patient-facing numeric and icon displays, eliminating an external LCD driver IC and saving board area and BOM cost. Operation from 1.8 V supports low-power battery designs, and the 13x13 mm 144-ball MAPBGA concentrates I/O in a compact footprint for handheld enclosures. Place analog sensor front ends on VDDA-supplied domains with careful ground splitting to exploit the device's separate analog supply pins and achieve low-noise measurement performance.
推荐
Industrial Control Panels with LCD
Industrial HMIs and control panels benefit directly from the MK53DN512ZCMD10's combination of a segment LCD controller, rich serial connectivity (UART, SPI, I2C), and general-purpose timers. The 100 MHz Cortex-M4 core with DSP instructions handles PID control loops and Modbus/CAN protocol stacks concurrently, while the segment LCD drives status and setpoint digits on panel glass without host overhead. The 3.3 V industrial-grade operation matches standard factory I/O levels, and 512 KB flash accommodates field-updatable firmware with dual-bank bootloaders. Because the part is NRND, new panel designs should plan a migration path to newer Kinetis generations, but the same-footprint MK5x family variants allow board reuse across panel SKUs with minimal requalification effort.
推荐
Portable Battery-Powered Meters
Utility meters, handheld analyzers, and portable gauges exploit the MK53DN512ZCMD10's 1.8 V operation option, which lowers dynamic power relative to fixed 3.3 V MCUs, together with the K5x family's low-power run and stop modes for duty-cycled measurement. The segment LCD controller keeps display power minimal - critical for multi-year battery life targets - while the FPU-accelerated core computes metrology algorithms such as RMS accumulation and calibration curves on-device. The 13x13 mm 144-ball package offers enough GPIO for keypad scanning, optical pulse inputs, and communication transceivers within a single compact BGA. Designers should implement deep sleep wake intervals via the low-leakage wakeup unit and budget startup latency in the measurement duty cycle to balance responsiveness against average current.
推荐
Building Automation and Sensor Nodes
Building automation nodes - occupancy sensors, damper controllers, and thermostat panels - use the MK53DN512ZCMD10 where a local segment LCD plus robust serial networking is required. The 100 MHz Cortex-M4 handles BACnet-lite or proprietary RS-485 stacks over UART while simultaneously sampling environmental sensors through I2C and SPI peripherals, and the FPU accelerates compensation and filtering math. The 512 KB flash stores protocol firmware, calibration tables, and logging data without external memory, simplifying qualification of sealed node enclosures. The industrial temperature grade covers unconditioned ceiling and mechanical-room installations. As the device is NRND, new node platforms should evaluate NXP's successor Kinetis families, but existing SKUs can remain on this part while secondary sources are secured.
推荐
Test and Measurement Equipment
Bench instruments, data loggers, and measurement adapters leverage the MK53DN512ZCMD10's DSP-accelerated Cortex-M4 core for waveform capture, threshold detection, and host communication. The 512 KB flash hosts USB or UART command firmware plus lookup tables, while the segment LCD provides device status on instrument front panels without a graphic display controller. The K50 measurement series' analog peripherals support signal-conditioning acquisition paths, and the 1.8 V/2.5 V/3.3 V supply flexibility eases integration into multi-rail instrument architectures. The 144-ball BGA offers the GPIO density needed for relay control, range switching, and multi-channel input multiplexing. For instruments requiring USB device connectivity alongside measurement duties, pairing with the K40/K21 family shares toolchain and driver investment across the product line.
推荐
Automotive-adjacent Diagnostic and Telematics Tools
Off-road, industrial-vehicle, and aftermarket diagnostic tools that are not regulated automotive-grade applications can use the MK53DN512ZCMD10 for scan tools and telematics bridges. The 100 MHz Cortex-M4 with FPU parses protocol stacks (J1939-style CAN gateways via external transceivers, UART-based links) while driving segment-LCD readouts of sensor values and fault codes. The 512 KB flash holds vehicle-profile tables and firmware for multiple vehicle protocols, and industrial temperature operation covers typical service-environment conditions. Note that this part is not AEC-Q100 qualified - for in-vehicle mounted electronics, NXP's automotive MCU lines should be specified instead. For service tools used outside the vehicle cabin, the K53's peripheral integration and display capability keep tool cost and enclosure size low.
推荐
推荐产品汇总
工程参考数据： MK53DN512ZCMD10 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MK53DN512ZVMD10 | MK52DN512ZCMD10 | MK40DN512ZVMD10 | MK60DN512ZVMD10 | MK50DN512CLL10 |
|---|---|---|---|---|---|---|
| Package | 144-MAPBGA (13x13 mm) | 144-MAPBGA (13x13 mm) - same | 144-MAPBGA (13x13 mm) - same | 144-MAPBGA (13x13 mm) - same | 144-MAPBGA (13x13 mm) - same | 144-LQFP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Max Clock | ARM Cortex-M4 (FPU) / 100 MHz | ARM Cortex-M4 (FPU) / 100 MHz | ARM Cortex-M4 (FPU) / 100 MHz | ARM Cortex-M4 (FPU) / 100 MHz | ARM Cortex-M4 (FPU) / 100 MHz | ARM Cortex-M4 (FPU) / 100 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Segment LCD Controller | Yes (K50 measurement series) | Yes | No (K52 general K5x) | No | No | No |
| Supply Voltage Options | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V |
| Family Specialization | K50 measurement series (LCD + analog measurement) | K50 measurement series - same | K52 general K5x | K40 USB/analog emphasis | K60 connectivity (Ethernet MAC-class) | K50 baseline without LCD |
关键差异点
- Integrated segment LCD controller on the measurement-series silicon （对比 MK52DN512ZCMD10)
- Identical footprint family for board reuse （对比 MK40DN512ZVMD10)
- Flexible 1.8 V / 2.5 V / 3.3 V supply operation （对比 MK50DN512CLL10)
设计说明
The 144-MAPBGA (13x13 mm, 0.8 mm-class ball pitch) requires careful breakout planning: route the outer ball rows by fanout under the package, and use via-in-pad with filled microvias for inner-row power and ground balls if your stackup allows. Maintain a solid unbroken ground plane on layer 2 directly beneath the BGA for signal return paths and supply integrity. Verify the 0.5 mm vs 0.8 mm ball pitch against the NXP K53 package drawing before finalizing the land pattern, and specify X-ray inspection at assembly since solder joints under the BGA are not optically inspectable.
Decouple every VDD and VDDA pin with 100 nF ceramic capacitors placed as close to the corresponding ball as routing permits, and add a bulk 10 uF capacitor per supply domain. Because the device accepts 1.8 V, 2.5 V, or 3.3 V rails, confirm per-domain voltage limits in the K53 datasheet - VDDA typically must stay within tolerance of VDD - and never exceed the absolute maximum ratings listed there. When powering from a switching regulator, add an RC or ferrite filter to VDDA to preserve analog measurement accuracy in this measurement-series device.
The part is NRND: before committing new production volume, confirm lifetime supply with NXP or secure a last-time-buy, and design the board so the same-footprint MK5x variants (MK53DN512ZVMD10, MK40DN512ZVMD10) can be substituted with only firmware changes. Also, the segment LCD controller drives specific LCD-dedicated pins - a board reused from a non-LCD K5x variant must connect the LCD glass to the correct balls. Estimated: verify RAM sizing against your firmware footprint before selecting this 512 KB-flash device over lower-density variants.
合规信息
Halogen-free compliance per third-party datasheet summary. ECCN 3A991.a.2. RoHS/REACH status not stated in provided data - confirm on the NXP product page Environmental Quality section. This is an industrial-grade MCU, not AEC-Q100 automotive qualified.
