MKL27Z64VDA4 - 48MHz Cortex-M0+ 64KB MCU | NXP
料号: MKL27Z64VDA4 ✓ 量产中MKL27Z64VDA4 概述
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripheral functions on one integrated circuit. The ARM Cortex-M0+ core belongs to the microcontroller hierarchy rather than the application-processor hierarchy: it is designed for compact embedded control, firmware execution, and deterministic peripheral interaction. The MKL27Z64VDA4 is positioned within NXP's Kinetis KL2 and KL27 families for compact connected-control designs.
The principal features begin with the 48 MHz Cortex-M0+ processor, which provides dedicated embedded-control performance with the Arm architecture. Its 64 KB Flash memory supplies 64K x 8 bits of program storage, while the 36-XFBGA package reduces the PCB area required by the device. Operating voltage options of 1.8 V, 2.5 V, and 3.3 V allow integration with common low-voltage digital systems. USB 2.0 OTG connectivity also supports designs involving USB peripheral, host, or cable-based data-transfer functions.
The device is identified as an active NXP product and is offered in a tray package. Its 3.5 x 3.5 mm XFBGA construction makes fine-pitch layout and careful escape routing important engineering considerations. Because the complete ordering suffix specifies package, temperature, and reel or tray attributes, designers should preserve the full MKL27Z64VDA4 part number when consolidating the BOM rather than shortening it to MKL27Z64.
Typical uses include compact USB-connected control modules, wearable and portable accessories, human-interface devices, sensor-control nodes, and embedded USB adapters. The 64 KB Flash footprint is suitable for moderate firmware workloads where code size remains manageable. USB 2.0 OTG is especially relevant when a design must connect to a host, implement a USB peripheral, or exchange data through a USB-C connector and power interface.
PCB planning should account for the 36-ball XFBGA geometry, exposed-pad requirements, and the datasheet-recommended decoupling and layout practices. Firmware development should use an NXP-supported toolchain and confirm the selected debug interface, clock configuration, USB routing, and low-power behavior against the manufacturer datasheet before production release.
This page combines the verified device identity, package information, architecture, memory capacity, operating voltage, and sourcing resources with application guidance, comparison points, and practical design notes. It also distinguishes the tray-packaged target from related packaging variants and identifies where a proposed replacement requires full package and pin verification.
直接替换替代料: MKL27Z64VDA4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MKL27Z64VDA4 (相同外形与封装尺寸) ——差异在于 Package, Mounting Type, Flash Memory, SRAM.
该产品暂无直接替换替代料。
请求替代料MKL27Z64VDA4 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum Core Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| Architecture | 32-bit |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| USB Interface | USB 2.0 OTG |
| 封装 | 36-pin XFBGA |
| Package Dimensions | 3.5 x 3.5 mm |
| 引脚数量 | 36 pins |
| 安装类型 | Surface-mount BGA |
| Shipping Package | Tray |
| Product Series | Kinetis KL2 / KL27 |
| 生命周期状态 | Active |
MKL27Z64VDA4 tray 引脚配置指南
MKL27Z64VDA4(tray 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MKL27Z64VDA4.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MKL27Z64VDA4 适用于 6 应用s: Compact USB Control Module, Portable Sensor Controller, Human Interface Device, Wearable Data Accessory, USB-to-Control Adapter, Compact Embedded User Interface.
Compact USB Control Module
The MKL27Z64VDA4 fits a compact USB control module because it combines a 48 MHz ARM Cortex-M0+ core with USB 2.0 OTG in a 3.5 x 3.5 mm 36-XFBGA package. The microcontroller can manage device control, USB data exchange, and firmware-based state handling without requiring a separate USB interface controller. Its 64 KB Flash provides a defined code-storage budget for compact device firmware. The principal engineering constraint is PCB density: the BGA escape routes and USB differential pair must be designed according to the manufacturer layout guidance.
推荐
Portable Sensor Controller
A portable sensor controller benefits from the MKL27Z64VDA4's 48 MHz Cortex-M0+ processing capability, 64 KB Flash storage, and low-voltage operating options of 1.8 V, 2.5 V, and 3.3 V. These characteristics support compact products that acquire sensor data, apply control logic, and expose status through USB. The small 36-XFBGA footprint preserves board area for the sensor and power circuitry. Firmware size, peripheral sharing, low-power behavior, and USB suspend requirements should be evaluated against the exact datasheet before finalizing the architecture.
推荐
Human Interface Device
The MKL27Z64VDA4 can serve as the central controller in a compact human interface device because USB 2.0 OTG provides a direct connection to a host while the 48 MHz ARM Cortex-M0+ core performs control processing. The 64 KB Flash capacity is suitable for moderate HID firmware, including input handling, status reporting, and configuration behavior. A production design should reserve sufficient code space for USB stack updates, define boot and recovery behavior, and validate enumeration behavior across the intended host operating systems.
推荐
Wearable Data Accessory
For a wearable data accessory, the MKL27Z64VDA4 offers a compact 36-XFBGA package measuring 3.5 x 3.5 mm, a 48 MHz Cortex-M0+ core, and USB 2.0 OTG connectivity. Its operating-voltage options of 1.8 V, 2.5 V, and 3.3 V support integration with compact power systems. The device can manage data transfer and embedded control while leaving board area for sensors or a battery subsystem. Power-budget analysis, USB signal routing, electromagnetic compatibility, and manufacturing yield for the fine-pitch BGA remain essential design considerations.
推荐
USB-to-Control Adapter
The MKL27Z64VDA4 is well suited to a USB-to-control adapter because USB 2.0 OTG enables host or peripheral operation while the Cortex-M0+ core executes the adapter protocol and control logic. The 64 KB Flash budget supports compact firmware for command parsing, status reporting, and configuration. Engineers should confirm USB role requirements, bus-power limits, connector data toggling, and supported device classes in the manufacturer datasheet. The 3.5 x 3.5 mm package also allows the adapter to retain a small industrial-control footprint.
推荐
Compact Embedded User Interface
The MKL27Z64VDA4 can drive a compact embedded user interface when the design requires local input handling and USB synchronization with a host system. Its 48 MHz Cortex-M0+ core handles control tasks, while 64 KB Flash holds firmware for display updates, button logic, and USB communication. The low-voltage options support integration into space-constrained embedded systems. Because the exact target does not list a display peripheral in the verified specifications, the interface strategy should be verified in the manufacturer datasheet and supplemented by an external I/O expander when required.
推荐
推荐产品汇总
工程参考数据: MKL27Z64VDA4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MKL27Z64VDA4R | MKL17Z64VDA4 | MKL27Z64VLH4 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| Product Family | Kinetis KL2 / KL27 | Kinetis KL2 / KL27 | Kinetis KL1 / KL17 | Kinetis KL2 / KL27 |
关键差异点
- Compact 36-XFBGA implementation (对比 MKL27Z64VLH4)
- USB 2.0 OTG connectivity (对比 MKL17Z64VDA4)
- Exact Kinetis KL2 and 64 KB configuration (对比 MKL17Z64VDA4)
设计说明
Treat the 36-XFBGA layout as a fine-pitch routing problem. Follow the manufacturer datasheet's recommended land pattern, ball assignments, via geometry, and escape-routing scheme rather than creating a footprint from package dimensions alone. Confirm that the PCB assembly process supports the ball pitch and that test points can be added without violating USB trace spacing or high-speed return-path continuity.
Route the USB interface as a controlled-impedance differential pair and provide a continuous reference plane beneath the pair. Keep switching nodes and high-current return paths away from USB and clock signals. The USB data path must also be checked for ESD protection, connector placement, branch minimization, and the exact routing recommendations in the NXP manufacturer datasheet.
Do not substitute MKL27Z64VDA4R for MKL27Z64VDA4 without confirming the required shipment format, and do not substitute MKL27Z64VLH4 because its 64-pin LQFP package is not the same footprint as the target's 36-pin XFBGA. Likewise, verify the complete suffix when creating an approved-parts list so that package, temperature range, and tray or reel requirements remain correct.
Design the 1.8 V, 2.5 V, or 3.3 V supply around the operating mode selected by the firmware and the manufacturer power guidance. Place required bypass capacitors close to their associated supply and ground balls, and maintain a return path that does not interrupt high-current or USB return currents. Validate brownout, startup, and suspended USB behavior at the system level.
合规信息
NXP identifies MKL27Z64VDA4 as an active product, but the available product information does not state the requested environmental-compliance certifications. These statuses must be confirmed from the current manufacturer declaration or package documentation before use in a regulated design.