NXP Semiconductors

MKL27Z64VDA4 - 48MHz Cortex-M0+ 64KB MCU | NXP

Référence : MKL27Z64VDA4 ✓ Actif
1.8 V, 2.5 V, and 3.3 V Vdss 36-pin XFBGA Package 48 MHz Speed 64 KB (64K x 8 bits) Memory
MOQ : 1 |

MKL27Z64VDA4 Présentation

The NXP Semiconductors MKL27Z64VDA4 is an ARM Cortex-M0+ Kinetis KL2 microcontroller with a 48 MHz core, 64 KB of Flash memory, USB 2.0 OTG support, and a 36-pin XFBGA package measuring 3.5 x 3.5 mm. It combines a compact 32-bit embedded-processing platform with low-voltage operation from 1.8 V to 3.3 V for space-constrained electronic designs.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripheral functions on one integrated circuit. The ARM Cortex-M0+ core belongs to the microcontroller hierarchy rather than the application-processor hierarchy: it is designed for compact embedded control, firmware execution, and deterministic peripheral interaction. The MKL27Z64VDA4 is positioned within NXP's Kinetis KL2 and KL27 families for compact connected-control designs.

The principal features begin with the 48 MHz Cortex-M0+ processor, which provides dedicated embedded-control performance with the Arm architecture. Its 64 KB Flash memory supplies 64K x 8 bits of program storage, while the 36-XFBGA package reduces the PCB area required by the device. Operating voltage options of 1.8 V, 2.5 V, and 3.3 V allow integration with common low-voltage digital systems. USB 2.0 OTG connectivity also supports designs involving USB peripheral, host, or cable-based data-transfer functions.

The device is identified as an active NXP product and is offered in a tray package. Its 3.5 x 3.5 mm XFBGA construction makes fine-pitch layout and careful escape routing important engineering considerations. Because the complete ordering suffix specifies package, temperature, and reel or tray attributes, designers should preserve the full MKL27Z64VDA4 part number when consolidating the BOM rather than shortening it to MKL27Z64.

Typical uses include compact USB-connected control modules, wearable and portable accessories, human-interface devices, sensor-control nodes, and embedded USB adapters. The 64 KB Flash footprint is suitable for moderate firmware workloads where code size remains manageable. USB 2.0 OTG is especially relevant when a design must connect to a host, implement a USB peripheral, or exchange data through a USB-C connector and power interface.

PCB planning should account for the 36-ball XFBGA geometry, exposed-pad requirements, and the datasheet-recommended decoupling and layout practices. Firmware development should use an NXP-supported toolchain and confirm the selected debug interface, clock configuration, USB routing, and low-power behavior against the manufacturer datasheet before production release.

This page combines the verified device identity, package information, architecture, memory capacity, operating voltage, and sourcing resources with application guidance, comparison points, and practical design notes. It also distinguishes the tray-packaged target from related packaging variants and identifies where a proposed replacement requires full package and pin verification.

Alternatives de remplacement direct pour MKL27Z64VDA4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MKL27Z64VDA4 (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Flash Memory, SRAM.

NXP Semiconductors
Package: 36-XFBGA (3.5 x 3.5 mm)
Mounting Type: Surface Mount
Flash Memory: 64 KB (64K x 8)
Comparer avec MKL27Z64VDA4 →
NXP Semiconductors
Package: 64-pin LQFP (10x10 mm)
Mounting Type: Surface Mount
SRAM: 8 KB
Comparer avec MKL27Z64VDA4 →

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

MKL27Z64VDA4 Valeurs maximales et caractéristiques électriques

Product Type 32-bit ARM Cortex-M0+ microcontroller
Processor Core ARM Cortex-M0+
Maximum Core Frequency 48 MHz
Flash Memory 64 KB (64K x 8 bits)
Architecture 32-bit
Operating Voltage Options 1.8 V, 2.5 V, and 3.3 V
USB Interface USB 2.0 OTG
Boîtier 36-pin XFBGA
Package Dimensions 3.5 x 3.5 mm
Nombre de broches 36 pins
Type de montage Surface-mount BGA
Shipping Package Tray
Product Series Kinetis KL2 / KL27
Statut du cycle de vie Active

Guide de configuration des broches du MKL27Z64VDA4 tray

Configuration des broches du MKL27Z64VDA4 (boîtier tray). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier tray pour le MKL27Z64VDA4

Aucune donnée de brochage détaillée disponible pour MKL27Z64VDA4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MKL27Z64VDA4 convient pour 6 applications: Compact USB Control Module, Portable Sensor Controller, Human Interface Device, Wearable Data Accessory, USB-to-Control Adapter, Compact Embedded User Interface.

🔧

Compact USB Control Module

The MKL27Z64VDA4 fits a compact USB control module because it combines a 48 MHz ARM Cortex-M0+ core with USB 2.0 OTG in a 3.5 x 3.5 mm 36-XFBGA package. The microcontroller can manage device control, USB data exchange, and firmware-based state handling without requiring a separate USB interface controller. Its 64 KB Flash provides a defined code-storage budget for compact device firmware. The principal engineering constraint is PCB density: the BGA escape routes and USB differential pair must be designed according to the manufacturer layout guidance.

🧩

Portable Sensor Controller

A portable sensor controller benefits from the MKL27Z64VDA4's 48 MHz Cortex-M0+ processing capability, 64 KB Flash storage, and low-voltage operating options of 1.8 V, 2.5 V, and 3.3 V. These characteristics support compact products that acquire sensor data, apply control logic, and expose status through USB. The small 36-XFBGA footprint preserves board area for the sensor and power circuitry. Firmware size, peripheral sharing, low-power behavior, and USB suspend requirements should be evaluated against the exact datasheet before finalizing the architecture.

🖥️

Human Interface Device

The MKL27Z64VDA4 can serve as the central controller in a compact human interface device because USB 2.0 OTG provides a direct connection to a host while the 48 MHz ARM Cortex-M0+ core performs control processing. The 64 KB Flash capacity is suitable for moderate HID firmware, including input handling, status reporting, and configuration behavior. A production design should reserve sufficient code space for USB stack updates, define boot and recovery behavior, and validate enumeration behavior across the intended host operating systems.

📱

Wearable Data Accessory

For a wearable data accessory, the MKL27Z64VDA4 offers a compact 36-XFBGA package measuring 3.5 x 3.5 mm, a 48 MHz Cortex-M0+ core, and USB 2.0 OTG connectivity. Its operating-voltage options of 1.8 V, 2.5 V, and 3.3 V support integration with compact power systems. The device can manage data transfer and embedded control while leaving board area for sensors or a battery subsystem. Power-budget analysis, USB signal routing, electromagnetic compatibility, and manufacturing yield for the fine-pitch BGA remain essential design considerations.

🌐

USB-to-Control Adapter

The MKL27Z64VDA4 is well suited to a USB-to-control adapter because USB 2.0 OTG enables host or peripheral operation while the Cortex-M0+ core executes the adapter protocol and control logic. The 64 KB Flash budget supports compact firmware for command parsing, status reporting, and configuration. Engineers should confirm USB role requirements, bus-power limits, connector data toggling, and supported device classes in the manufacturer datasheet. The 3.5 x 3.5 mm package also allows the adapter to retain a small industrial-control footprint.

📺

Compact Embedded User Interface

The MKL27Z64VDA4 can drive a compact embedded user interface when the design requires local input handling and USB synchronization with a host system. Its 48 MHz Cortex-M0+ core handles control tasks, while 64 KB Flash holds firmware for display updates, button logic, and USB communication. The low-voltage options support integration into space-constrained embedded systems. Because the exact target does not list a display peripheral in the verified specifications, the interface strategy should be verified in the manufacturer datasheet and supplemented by an external I/O expander when required.

What are the key specifications of MKL27Z64VDA4 that engineers should know?
The MKL27Z64VDA4 combines a 48 MHz ARM Cortex-M0+ core, 64 KB of Flash memory, USB 2.0 OTG, and a compact 36-pin XFBGA package measuring 3.5 x 3.5 mm. According to the NXP product page and manufacturer datasheet, it belongs to the Kinetis KL2 family and supports 1.8 V, 2.5 V, and 3.3 V operation. These characteristics make it suitable for compact embedded-control products requiring USB connectivity and a small board footprint.
What is the processor core and operating frequency of MKL27Z64VDA4?
The MKL27Z64VDA4 uses a 32-bit ARM Cortex-M0+ processor core operating at up to 48 MHz. The Cortex-M0+ core is an embedded processor intended for microcontroller control rather than high-performance computing. NXP identifies the device as part of the Kinetis KL2 family, and the product information confirms the 48 MHz operating frequency and 32-bit architecture.
How much Flash memory does MKL27Z64VDA4 contain?
The MKL27Z64VDA4 contains 64 KB of Flash memory, organized as 64K x 8 bits, for firmware storage. According to the NXP product information and distributor technical listings, this capacity is paired with a 48 MHz ARM Cortex-M0+ core. It is appropriate for compact control firmware, and the manufacturer datasheet should be used to confirm RAM and other memory resources.
What package and dimensions are used by MKL27Z64VDA4?
The MKL27Z64VDA4 uses a 36-pin XFBGA package measuring 3.5 x 3.5 mm. NXP and distributor product information identify the exact package as 36-XFBGA, while the manufacturer ordering information identifies the target configuration as tray packaged. The fine-pitch BGA geometry requires careful PCB escape routing, pad assignment, assembly process control, and thermal design.
Which operating voltages are supported by MKL27Z64VDA4?
The MKL27Z64VDA4 supports 1.8 V, 2.5 V, and 3.3 V operation. These low-voltage supply options allow the microcontroller to be paired with common portable and embedded systems. According to the NXP technical listing, the device is a 32-bit ARM Cortex-M0+ RISC microcontroller with selectable 1.8 V, 2.5 V, and 3.3 V operating rails.
Does MKL27Z64VDA4 include USB connectivity?
Yes, the MKL27Z64VDA4 includes a USB 2.0 OTG peripheral. According to the NXP product information, this interface supports compact designs requiring USB connectivity in a small package. Firmware, connector, power, routing, and signal-integrity requirements should be reviewed against the manufacturer datasheet before implementing a USB interface.
Where can I download the MKL27Z64VDA4 datasheet PDF?
The official MKL27Z64VDA4 datasheet is available through the NXP product page linked on this page. Open the NXP MKL27Z64VDA4 product page and select its Data Sheet link. Using the manufacturer copy ensures that the pin assignments, electrical limits, package drawings, clock requirements, and USB implementation guidance correspond to the exact ordering code.
Where can I find the MKL27Z64VDA4 pinout and package drawing?
The MKL27Z64VDA4 pinout and package drawing are found in the NXP manufacturer datasheet for the 36-XFBGA device. Use the datasheet pin-description table and package outline when assigning PCB balls and escape traces. The available product information confirms the 36-XFBGA package and its 3.5 x 3.5 mm dimensions but does not reproduce the complete numbered ball assignment here.
Where can I buy MKL27Z64VDA4 online?
The MKL27Z64VDA4 can be requested through the Request a Quote form on this page. The form supports exact-MPN sourcing, quantity requirements, and lead-time inquiries without presenting a stale price table. Confirm that the quoted manufacturer part number is MKL27Z64VDA4 and that the required tray packaging matches the target configuration.
What is the price of MKL27Z64VDA4?
The current commercial price for MKL27Z64VDA4 should be obtained through the Request a Quote form on this page. Exact pricing depends on quantity, supply position, and packaging requirements. Submit the full manufacturer part number and required quantity so the quote can be matched to the 36-XFBGA tray-packaged configuration.
What is the lead time and stock status for MKL27Z64VDA4?
Current stock and lead time for MKL27Z64VDA4 should be confirmed through the Request a Quote form on this page. NXP lists the device as active, but lifecycle status alone does not guarantee immediate inventory or a fixed delivery interval. Provide the required quantity and target delivery date when requesting the quotation.
Is MKL27Z64VDA4 in stock for immediate shipment?
The current availability of MKL27Z64VDA4 is obtained through the Request a Quote form on this page. The manufacturer identifies the exact part as active, and distributor listings offer the target configuration, but live inventory is quantity-dependent. Submit the required order quantity to receive an availability and lead-time response for MKL27Z64VDA4.
What is the difference between MKL27Z64VDA4 and MKL27Z64VDA4R?
The MKL27Z64VDA4 and MKL27Z64VDA4R identify the same 64 KB, 48 MHz Cortex-M0+ Kinetis microcontroller in the 36-XFBGA package, with the R suffix identifying the alternate shipping format. NXP and distributor listings show both variants with the same core, memory, and package. Treat the R variant as a procurement-packaging choice rather than a different functional device.
MKL27Z64VDA4 vs MKL17Z64VDA4: which is better for a compact USB design?
The MKL27Z64VDA4 is the documented choice when the design requires the Kinetis KL2-family part with a 48 MHz Cortex-M0+ core, 64 KB Flash, USB 2.0 OTG, and 36-XFBGA package. A comparison listing identifies MKL17Z64VDA4 as a related part, but it does not establish an identical USB feature set or footprint. Do not treat it as a drop-in substitute without verifying its datasheet.
When should I choose MKL27Z64VDA4 instead of a larger 64-pin MCU?
Choose MKL27Z64VDA4 when a design values a compact 3.5 x 3.5 mm footprint, a 48 MHz ARM Cortex-M0+ core, 64 KB Flash, and USB 2.0 OTG. The 36-XFBGA package can reduce board area compared with a 64-pin LQFP device, but it also demands fine-pitch assembly capability and careful escape routing. A larger-package alternative is preferable only if it offers required peripherals, memory, or simpler manufacturing.
What can replace MKL27Z64VDA4 as a drop-in replacement?
No alternate manufacturer part was validated as a drop-in replacement for MKL27Z64VDA4. A genuine drop-in alternative must use the same 36-XFBGA footprint, preserve pin-to-pin assignments, and match core, memory, voltage, and USB capabilities. MKL27Z64VDA4R is an NXP packaging variant, while other listed KL-series parts differ in package or feature details and therefore require schematic and PCB review.
Is there an equivalent microcontroller from another manufacturer for MKL27Z64VDA4?
No cross-brand drop-in equivalent was established for the MKL27Z64VDA4. The exact target is a 36-XFBGA device with a 48 MHz ARM Cortex-M0+ core, 64 KB Flash, USB 2.0 OTG, and specified low-voltage operation. A different manufacturer's microcontroller may provide similar functionality, but pin, clock, USB, memory, bootloader, and software-migration reviews are required before it can replace the NXP part.
Is MKL27Z64VDA4 suitable for a USB-connected portable accessory?
The MKL27Z64VDA4 is suitable for a USB-connected portable accessory when 64 KB Flash, a 48 MHz Cortex-M0+ core, and USB 2.0 OTG are sufficient. Its 36-XFBGA package measures only 3.5 x 3.5 mm, helping reduce board area. The design must also account for USB routing, connector mechanics, supply requirements, firmware support, and fine-pitch PCB assembly.

Données de référence d'ingénierie pour MKL27Z64VDA4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MKL27Z64VDA4 when the design needs a compact 3.5 x 3.5 mm microcontroller with a 48 MHz ARM Cortex-M0+ core, 64 KB Flash, USB 2.0 OTG, and operation from 1.8 V to 3.3 V. Choose MKL27Z64VDA4R when the assembly process requires reel packaging and the purchased quantity is specified by the R suffix. Choose a 64-pin LQFP MCU such as MKL27Z64VLH4 when a larger package is easier to assemble or provides required features, accepting the increased board area. Treat MKL17Z64VDA4 as a related family option only after checking its complete electrical, peripheral, and package specifications. For a true second-source drop-in decision, require the same 36-XFBGA footprint, pin-to-pin compatibility, equivalent memory and USB functions, and a verified software migration path.

Comparaison avec les alternatives

Paramètre Ce produit MKL27Z64VDA4R MKL17Z64VDA4 MKL27Z64VLH4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Flash Memory 64 KB 64 KB 64 KB 64 KB
Product Family Kinetis KL2 / KL27 Kinetis KL2 / KL27 Kinetis KL1 / KL17 Kinetis KL2 / KL27

Principaux différenciateurs

  • Compact 36-XFBGA implementation (vs MKL27Z64VLH4)
  • USB 2.0 OTG connectivity (vs MKL17Z64VDA4)
  • Exact Kinetis KL2 and 64 KB configuration (vs MKL17Z64VDA4)

Notes de conception

Treat the 36-XFBGA layout as a fine-pitch routing problem. Follow the manufacturer datasheet's recommended land pattern, ball assignments, via geometry, and escape-routing scheme rather than creating a footprint from package dimensions alone. Confirm that the PCB assembly process supports the ball pitch and that test points can be added without violating USB trace spacing or high-speed return-path continuity.

Route the USB interface as a controlled-impedance differential pair and provide a continuous reference plane beneath the pair. Keep switching nodes and high-current return paths away from USB and clock signals. The USB data path must also be checked for ESD protection, connector placement, branch minimization, and the exact routing recommendations in the NXP manufacturer datasheet.

Do not substitute MKL27Z64VDA4R for MKL27Z64VDA4 without confirming the required shipment format, and do not substitute MKL27Z64VLH4 because its 64-pin LQFP package is not the same footprint as the target's 36-pin XFBGA. Likewise, verify the complete suffix when creating an approved-parts list so that package, temperature range, and tray or reel requirements remain correct.

Design the 1.8 V, 2.5 V, or 3.3 V supply around the operating mode selected by the firmware and the manufacturer power guidance. Place required bypass capacitors close to their associated supply and ground balls, and maintain a return path that does not interrupt high-current or USB return currents. Validate brownout, startup, and suspended USB behavior at the system level.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

NXP identifies MKL27Z64VDA4 as an active product, but the available product information does not state the requested environmental-compliance certifications. These statuses must be confirmed from the current manufacturer declaration or package documentation before use in a regulated design.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MKL27Z64VDA4 datasheet MKL27Z64VDA4 pinout MKL27Z64VDA4 datasheet pdf MKL27Z64VDA4 specifications MKL27Z64VDA4 36-XFBGA MKL27Z64VDA4 48MHz Cortex-M0+ MKL27Z64VDA4 USB 2.0 OTG MKL27Z64VDA4 equivalent MKL27Z64VDA4 replacement MKL27Z64VDA4 vs MKL27Z64VDA4R MKL27Z64VDA4 price MKL27Z64VDA4 stock NXP MKL27Z64VDA4 MKL27Z64VDA4 application circuit MKL27Z64VDA4 footprint

Composants & termes associés

NXP Semiconductors MKL27Z64VDA4 MKL27Z64VDA4R MKL17Z64VDA4 MKL27Z64VLH4 Kinetis KL2 Kinetis KL27 ARM Cortex-M0+ microcontroller embedded processor USB 2.0 OTG Flash memory 36-XFBGA BGA package family surface-mount package 48 MHz clock 64 KB Flash 1.8 V operation 2.5 V operation 3.3 V operation USB control module portable sensor controller human interface device wearable data accessory embedded user interface
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ