Texas Instruments

MSP430F2002TPW - 16-Bit Low-Power MCU | Texas Instruments

料号: MSP430F2002TPW ✓ 量产中
14-pin TSSOP (PW) Package 16 MHz Speed 1 KB Memory
最小起订量: 1 |

MSP430F2002TPW 概述

The Texas Instruments MSP430F2002TPW is a 16-bit mixed-signal microcontroller operating at up to 16 MHz, with 1 KB of Flash memory, 128 bytes of SRAM, and ten I/O pins in a 14-pin TSSOP (PW) package. It integrates SPI and I2C serial interfaces, a comparator, a 16-bit timer, and a digitally controlled oscillator optimized for low-power wake-up.

An ultra-low-power mixed-signal microcontroller is a semiconductor that combines a compact digital processing core with analog and communication peripherals for embedded measurement and control. The MSP430 architecture belongs to the broader MCU and embedded-controller hierarchy, while its 16-bit RISC CPU, 16-bit registers, and event-driven operation support efficient control of sensors, timers, and low-power peripherals.

Key device characteristics include a maximum 16 MHz clock, 1 KB Flash program memory, and 128 bytes of SRAM. The integrated SPI and I2C interfaces reduce external component requirements, while the comparator supports threshold-based and analog signal conditioning. The built-in 16-bit timer supports periodic measurement, timing, and PWM-related functions, and the DCO enables the processor to wake from a low-power mode to active mode in less than 1 microsecond.

The MSP430F20xx architecture is designed around a 16-bit RISC core with 16-bit registers and several low-power operating modes. Its mixed-signal feature set places serial communications, analog comparison, and timing functions alongside the CPU rather than requiring separate devices. This integration makes the MCU useful when board area, standby power, and external peripheral count are more important than large program-memory capacity.

Typical uses include battery-powered environmental sensors, compact industrial measurement instruments, portable health-monitoring devices, smart-home sensor nodes, energy-monitoring equipment, and low-power control modules. SPI and I2C support digital sensors or transceivers, the comparator supports simple analog threshold detection, and the timer provides a deterministic time base for sampling and control tasks.

The primary design trade-off is the small 1 KB Flash and 128-byte SRAM footprint. Firmware must be compact, interrupt-driven, and carefully organized, while code should return the processor to a low-power state during long idle intervals. Decoupling, clock stability, reset handling, and exposed-debug considerations should be evaluated before PCB release.

This product record combines manufacturer specifications, package and sourcing information, drop-in alternatives, and practical selection guidance. It is intended to help engineers determine whether the MSP430F2002TPW offers the correct balance of processing speed, mixed-signal integration, package size, and low-power operation for an embedded design.

直接替换替代料: MSP430F2002TPW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MSP430F2002TPW (相同外形与封装尺寸) ——差异在于 Flash Memory, ADC Resolution, Operating Temperature Range, SRAM, Supply Voltage.

Texas Instruments
ADC Resolution: 16-bit sigma-delta
Operating Temperature Range: -40 °C to +85 °C
Supply Voltage: 2.5 V to 3.3 V
对比 MSP430F2002TPW →
Texas Instruments
Flash Memory: 2 KB
ADC Resolution: 10 bits
Operating Temperature Range: -40°C to 85°C
对比 MSP430F2002TPW →

MSP430F2001IPW

✅ 直接替换 ⚠️ 规格未核验
📦 14-TSSOP (PW)
Same 14-pin TSSOP family footprint and 16 MHz class; family-member function mapping differs and the ordering suffix changes the delivery format.

📋 参考替代料(不在目录中)

MSP430F2003IPW

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-TSSOP (PW)
16-bit RISC · 16 MHz · 16 bit · 1 ADC · 16-bit sigma-delta · 1 USI supporting SPI and I2C · 1 KB · 128 bytes

联系询价

查看数据手册 →

MSP430F2012IPW

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 14-TSSOP (PW)
16-bit RISC · 16 MHz · 125 ns · 2 KB · 128 bytes · 10 bits · I2C and SPI · Yes

联系询价

查看数据手册 →

MSP430F2021IPW

✅ 直接替换 ⚠️ 规格未核验
📦 14-TSSOP (PW)
Same 14-pin TSSOP MSP430F20xx footprint and 16 MHz architecture; device-specific memory and peripheral differences must be checked before reuse.

📋 参考替代料(不在目录中)

MSP430F2033IPW

✅ 直接替换 ⚠️ 规格未核验
📦 14-TSSOP (PW)
Same 14-pin TSSOP MSP430F20xx footprint and 16 MHz clock class; higher-complexity family-member resources create larger firmware and RAM differences.

📋 参考替代料(不在目录中)

MSP430F2002TPW 最大额定值与电气特性

Product Type 16-bit ultra-low-power mixed-signal microcontroller
最大时钟频率 16 MHz
CPU Architecture 16-bit RISC
Register Width 16 bit
Flash Memory 1 KB
Program Memory Organization 1K x 8
SRAM 128 byte
General-Purpose I/O Pins 10 pins
Serial Interface SPI and I2C
Analog Peripheral Comparator
Timer 16-bit
Clock Source Digitally controlled oscillator
Low-Power Wake-Up Time Less than 1 us
Low-Power Modes 5 modes
封装 14-pin TSSOP (PW)
Package Width 4.40 mm
安装类型 Surface mount

MSP430F2002TPW 4.40 mm 引脚配置指南

MSP430F2002TPW(4.40 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F2002TPW 的 4.40 mm 封装引脚图

暂无详细引脚数据: MSP430F2002TPW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F2002TPW 适用于 6 应用s: Battery-Powered Environmental Sensors, Portable Health-Monitoring Devices, Industrial Measurement Instruments, Smart-Home Sensor Nodes, Energy and Power Monitoring, Low-Power Control Modules.

🧩

Battery-Powered Environmental Sensors

The MSP430F2002TPW fits compact environmental sensing nodes because its 16-bit RISC core, five low-power modes, and DCO wake-up time of less than 1 microsecond support event-driven measurement. SPI and I2C can connect digital temperature, humidity, and pressure sensors, while the comparator can perform threshold detection around an analog signal. The 1 KB Flash and 128-byte SRAM favor compact acquisition and filtering code, but the firmware must be partitioned so that only required peripherals remain active between samples. A duty-cycled wake, measure, transmit, and sleep sequence can minimize battery consumption while preserving deterministic timing from the integrated 16-bit timer.

💊

Portable Health-Monitoring Devices

The MSP430F2002TPW supports compact health-monitoring products that combine a low-power sensor interface with local control logic. Its I2C and SPI interfaces allow connection to sensing front ends or storage devices, and the comparator can implement simple threshold or alarm functions around analog inputs. The processor wakes from a low-power state in less than 1 microsecond, making it practical to sample intermittently instead of running continuously. Firmware and patient-data handling must fit within 1 KB Flash and 128 bytes SRAM, so the design should use short routines, bounded buffers, and interrupt-driven transfers rather than large display or protocol frameworks.

🏭

Industrial Measurement Instruments

The MSP430F2002TPW is appropriate for compact industrial measurement modules where low standby power and deterministic sampling matter. The 16 MHz CPU provides enough performance for sensor conditioning, calibration checks, and communications, while the integrated 16-bit timer supports periodic acquisition and timeout handling. SPI and I2C permit connection to industrial sensors, transceivers, or external nonvolatile memory without requiring dedicated serial-interface ICs. A practical design should isolate analog and digital return currents, use the manufacturer’s recommended bypass network, and validate the analog input path against the comparator and external converter requirements.

🏠

Smart-Home Sensor Nodes

The MSP430F2002TPW fits smart-home sensor nodes that remain connected to a low-energy network and wake only when motion, environmental, or contact sensing requires an update. Its SPI and I2C interfaces can connect radios, environmental sensors, and local storage, while five low-power modes reduce consumption between events. The ten I/O pins support discrete sensors, indicators, and control outputs without excessive multiplexing. Firmware architecture is critical because the MCU has only 1 KB Flash and 128 bytes SRAM; a compact protocol state machine, interrupt-driven serial transfers, and scheduled sleep periods will generally be easier to maintain than a layered communication stack.

⚡

Energy and Power Monitoring

The MSP430F2002TPW can support energy-monitoring modules that periodically measure current or voltage-related signals, record operating statistics, and report results through a serial interface. The comparator is useful for threshold events, the 16-bit timer establishes stable sampling intervals, and the low-power architecture reduces standby demand when the monitor is not actively sampling. External precision converters are appropriate when more than the comparator’s basic threshold function is required. Designers should preserve the low-power benefit by disabling unused peripherals, choosing an appropriate DCO operating point, and avoiding continuous polling of the serial bus when measurements are not being collected.

🔧

Low-Power Control Modules

The MSP430F2002TPW can implement compact control modules for actuators, indicators, and low-speed peripheral systems. Its ten I/O pins, comparator, and built-in timer provide the fundamental resources for state machines, timing, and analog threshold decisions, while SPI or I2C can connect a display driver, sensor, or remote communications device. The 16 MHz CPU allows responsive event handling without requiring a higher-power MCU, and the fast DCO wake-up supports duty-cycled operation. Because the memory budget is small, controls should use direct interrupt routines, bounded state tables, and peripheral-specific drivers, with brownout, reset, and clock behavior validated over the intended supply range.

What are the key specifications of MSP430F2002TPW that engineers should know?
The MSP430F2002TPW is a 16-bit mixed-signal MCU with a maximum clock frequency of 16 MHz, 1 KB of Flash, 128 bytes of SRAM, and ten I/O pins. It also includes SPI, I2C, a comparator, and a 16-bit timer in a 14-pin TSSOP package. According to the Texas Instruments product page, the DCO supports wake-up from low-power mode to active mode in less than 1 microsecond.
What is the operating voltage range of MSP430F2002TPW?
The MSP430F2002TPW operating voltage range should be taken from the electrical characteristics table in the manufacturer datasheet for the specific device grade. The supplied product information confirms a 1.2 V to 3.6 V family architecture but does not reproduce the complete grade-specific limits. Review the recommended operating conditions and absolute maximum ratings before powering external circuitry from the device.
What can replace MSP430F2002TPW on the same PCB?
MSP430F2002TPW-compatible replacements must use the same 14-pin TSSOP footprint and preserve the MSP430F20xx pin, clock, reset, and peripheral assignments. Same-family candidates include MSP430F2001IPW, MSP430F2003IPW, MSP430F2012IPW, MSP430F2021IPW, and MSP430F2033IPW. Firmware, memory requirements, and peripheral differences still require review before treating any candidate as a functional substitute.
Is MSP430F2002TPW suitable for battery-powered sensor nodes?
The MSP430F2002TPW is well suited to battery-powered sensor nodes because it combines a 16-bit RISC CPU, five low-power modes, and a DCO that wakes the processor in less than 1 microsecond. Its integrated SPI, I2C, comparator, and timer reduce external component count. The 128-byte SRAM and 1 KB Flash demand compact firmware, but low-duty-cycle sensing can reduce overall system energy use.
Where can I download the MSP430F2002TPW datasheet PDF?
The official MSP430F2002TPW documentation is available from the Texas Instruments product page at https://www.ti.com/product/MSP430F2002. Open the product documentation section to access the manufacturer datasheet. Use the pin-description table, electrical characteristics, and package drawings when assigning PCB signals or checking operating limits.
Where can I find the MSP430F2002TPW pinout?
The MSP430F2002TPW pinout appears in the pin-configuration diagram and pin-description table in the Texas Instruments MSP430F2002 datasheet. The component is a 14-pin TSSOP device, so PCB symbol and footprint libraries must contain all 14 terminals rather than a generic 16-pin layout. Keep the exposed pad and thermal requirements out of the symbol unless the selected package drawing specifically requires one.
What is the difference between MSP430F2002TPW and MSP430F2001IPW?
MSP430F2002TPW and MSP430F2001IPW belong to the same MSP430F20xx family and use the 14-pin TSSOP architecture, but their ordering codes identify different family members and package-delivery configurations. The manufacturer’s family documentation should be checked for any peripheral or memory distinction before substitution. Firmware must also be recompiled and validated even when the footprint remains unchanged.
When should I choose MSP430F2002TPW over MSP430F2003IPW?
Choose MSP430F2002TPW when a design specifically targets the MSP430F2002 device and its 1 KB Flash, 128-byte SRAM, and integrated mixed-signal resources. Choose MSP430F2003IPW only after confirming that its family-member functions and software behavior meet the design requirements while preserving the 14-pin TSSOP footprint. The selection should be based on the exact datasheet, not solely on the shared package.
Is MSP430F2002TPW the same as MSP430F2002TPWR?
MSP430F2002TPW and MSP430F2002TPWR identify the same MSP430F2002 device in a 14-pin TSSOP (PW) package, with the final ordering suffix distinguishing the delivery format. The electrical MCU and package are equivalent, but procurement teams should verify reel, tube, or other packing requirements before treating the order codes as interchangeable.
How much memory does MSP430F2002TPW have?
The MSP430F2002TPW contains 1 KB of Flash program memory, organized as 1K x 8, and 128 bytes of SRAM. The Flash supports firmware storage while the SRAM holds stack data, variables, and interrupt or working state. These resources favor compact, event-driven code and should be checked against the compiled image and worst-case RAM requirement.
What peripherals are integrated into MSP430F2002TPW?
The MSP430F2002TPW integrates SPI, I2C, a comparator, a 16-bit timer, ten I/O pins, and a digitally controlled oscillator into a single mixed-signal MCU. These resources support serial sensors, threshold detection, periodic sampling, and low-power sequencing. The Texas Instruments product page identifies these functions as part of the MSP430F20xx mixed-signal feature set.
How do I design the power supply for MSP430F2002TPW?
Design the MSP430F2002TPW rail around the manufacturer’s recommended operating conditions and place the required bypass capacitance close to VCC and ground. Because the DCO and digital peripherals can create fast current transitions, trace return current should remain compact and uninterrupted. Confirm the final capacitor values, voltage tolerance, and startup requirements against the datasheet reference circuit.
Where can I buy MSP430F2002TPW and what is the current lead time?
Use the Request a Quote form on this page to request MSP430F2002TPW availability, MOQ, delivery options, and a current lead-time quotation. The listed 14-pin TSSOP configuration should be stated on the request. Commercial terms and shipment timing can change, so obtain a written quotation for the required quantity and packaging format.
What is the current price and stock status of MSP430F2002TPW?
Submit the MSP430F2002TPW request through the Request a Quote form on this page to obtain a current unit quotation and stock confirmation. The exact quantity, reel format, and shipping destination affect commercial availability. Do not rely on an archived listing for a production commitment because market stock and lead time can change.
Is MSP430F2002TPW active for new designs?
Texas Instruments lists the MSP430F2002 family on its official product page, and the MSP430F2002TPW ordering option remains available in the 14-pin TSSOP (PW) configuration. This supports consideration for new low-power embedded designs. Confirm the latest lifecycle and quality information on the manufacturer product page before releasing a production BOM.

工程参考数据: MSP430F2002TPW ——对比、设计指导和合规信息。

选型指南

Choose the MSP430F2002TPW when a compact, low-power design needs a 16-bit MCU with 1 KB Flash, 128 bytes of SRAM, SPI, I2C, a comparator, and a 16-bit timer in a 14-pin TSSOP package. It is especially suitable for intermittent sensing where the DCO wakes active mode in less than 1 microsecond. Select a same-family MSP430F20xx variant when a larger memory budget or a specific peripheral change is required while retaining the package architecture. MSP430F2001IPW and MSP430F2003IPW are close footprint alternatives, while MSP430F2012IPW, MSP430F2021IPW, and MSP430F2033IPW may provide higher device complexity. Treat every substitution as a firmware and electrical revalidation exercise, not merely a mechanical footprint match.

与替代料对比

参数 本产品 MSP430F2001IPW MSP430F2003IPW MSP430F2012IPW MSP430F2021IPW MSP430F2033IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW)
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz

关键差异点

  • Compact mixed-signal integration (对比 MSP430F2001IPW)
  • Fast event-driven wake-up (对比 MSP430F2012IPW)
  • Small optimized footprint (对比 MSP430F2033IPW)

设计说明

Place the manufacturer-recommended bypass capacitors immediately across the MSP430F2002TPW supply pins, with a short ground return and no branch current through analog or digital interface traces. The DCO permits rapid wake-up, so supply transients can follow processor activity rather than remaining slow and isolated. Validate brownout behavior, startup time, and rail tolerance across the intended temperature range.

Route the 14 TSSOP pads according to the exact PW package drawing and confirm that the PCB footprint has the correct lead pitch, span, and pin-1 orientation. Do not substitute a generic 14-pin SOIC footprint because body width, lead span, and pad geometry may differ. A mechanical cross-check against the manufacturer package drawing should occur before fabrication.

The 1 KB Flash and 128-byte SRAM are the principal design constraints. Estimate worst-case RAM use including stack, interrupt nesting, and serial buffers, and avoid architecture that depends on large libraries or floating-point-heavy routines. Use an interrupt-driven design and measure the actual linker map before production release.

Keep SPI and I2C routing short, provide pull-ups where required by the bus specification, and keep the oscillator and reset paths away from switching nodes. Although the MCU operates at up to 16 MHz, poor return paths can couple noise into sensitive measurements. Ground the shield or guard strategy around analog inputs according to the reference circuit and evaluate signal integrity with the final load configuration.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page confirms environmental and quality information, but the retrieved excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MSP430F2002TPW MSP430F2002TPW datasheet MSP430F2002TPW datasheet pdf MSP430F2002TPW pinout MSP430F2002TPW equivalent MSP430F2002TPW replacement MSP430F2002TPW price MSP430F2002TPW stock Texas Instruments MSP430F2002TPW MSP430F2002 14-TSSOP pinout MSP430F2002TPW vs MSP430F2003IPW MSP430F2002TPW low power application

相关元器件 & 术语

Texas Instruments MSP430F2002 MSP430F2002TPW MSP430F2001IPW MSP430F2003IPW MSP430F2012IPW MSP430F2021IPW MSP430F2033IPW MSP430 16-bit RISC CPU mixed-signal microcontroller ultra-low-power MCU microcontroller embedded controller semiconductor digitally controlled oscillator SPI I2C comparator 16-bit timer TSSOP-14 PW package surface mount sensor node industrial measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情