MSP430F2002TPW - 16-Bit Low-Power MCU | Texas Instruments
部品番号: MSP430F2002TPW ✓ 生産中MSP430F2002TPW 概要
An ultra-low-power mixed-signal microcontroller is a semiconductor that combines a compact digital processing core with analog and communication peripherals for embedded measurement and control. The MSP430 architecture belongs to the broader MCU and embedded-controller hierarchy, while its 16-bit RISC CPU, 16-bit registers, and event-driven operation support efficient control of sensors, timers, and low-power peripherals.
Key device characteristics include a maximum 16 MHz clock, 1 KB Flash program memory, and 128 bytes of SRAM. The integrated SPI and I2C interfaces reduce external component requirements, while the comparator supports threshold-based and analog signal conditioning. The built-in 16-bit timer supports periodic measurement, timing, and PWM-related functions, and the DCO enables the processor to wake from a low-power mode to active mode in less than 1 microsecond.
The MSP430F20xx architecture is designed around a 16-bit RISC core with 16-bit registers and several low-power operating modes. Its mixed-signal feature set places serial communications, analog comparison, and timing functions alongside the CPU rather than requiring separate devices. This integration makes the MCU useful when board area, standby power, and external peripheral count are more important than large program-memory capacity.
Typical uses include battery-powered environmental sensors, compact industrial measurement instruments, portable health-monitoring devices, smart-home sensor nodes, energy-monitoring equipment, and low-power control modules. SPI and I2C support digital sensors or transceivers, the comparator supports simple analog threshold detection, and the timer provides a deterministic time base for sampling and control tasks.
The primary design trade-off is the small 1 KB Flash and 128-byte SRAM footprint. Firmware must be compact, interrupt-driven, and carefully organized, while code should return the processor to a low-power state during long idle intervals. Decoupling, clock stability, reset handling, and exposed-debug considerations should be evaluated before PCB release.
This product record combines manufacturer specifications, package and sourcing information, drop-in alternatives, and practical selection guidance. It is intended to help engineers determine whether the MSP430F2002TPW offers the correct balance of processing speed, mixed-signal integration, package size, and low-power operation for an embedded design.
ドロップイン代替品: MSP430F2002TPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2002TPW (同一形状・フットプリント) — 相違点: Flash Memory, ADC Resolution, Operating Temperature Range, SRAM, Supply Voltage.
MSP430F2001IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2003IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2012IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2021IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2033IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2002TPW 最大定格&電気的特性
| Product Type | 16-bit ultra-low-power mixed-signal microcontroller |
| 最大クロック周波数 | 16 MHz |
| CPU Architecture | 16-bit RISC |
| Register Width | 16 bit |
| Flash Memory | 1 KB |
| Program Memory Organization | 1K x 8 |
| SRAM | 128 byte |
| General-Purpose I/O Pins | 10 pins |
| Serial Interface | SPI and I2C |
| Analog Peripheral | Comparator |
| Timer | 16-bit |
| Clock Source | Digitally controlled oscillator |
| Low-Power Wake-Up Time | Less than 1 us |
| Low-Power Modes | 5 modes |
| パッケージ | 14-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| 実装タイプ | Surface mount |
MSP430F2002TPW 4.40 mm ピン配置ガイド
MSP430F2002TPW (4.40 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2002TPW.
詳細は データシート をご参照ください。
主な用途
MSP430F2002TPW の用途: 6 件s: Battery-Powered Environmental Sensors, Portable Health-Monitoring Devices, Industrial Measurement Instruments, Smart-Home Sensor Nodes, Energy and Power Monitoring, Low-Power Control Modules.
Battery-Powered Environmental Sensors
The MSP430F2002TPW fits compact environmental sensing nodes because its 16-bit RISC core, five low-power modes, and DCO wake-up time of less than 1 microsecond support event-driven measurement. SPI and I2C can connect digital temperature, humidity, and pressure sensors, while the comparator can perform threshold detection around an analog signal. The 1 KB Flash and 128-byte SRAM favor compact acquisition and filtering code, but the firmware must be partitioned so that only required peripherals remain active between samples. A duty-cycled wake, measure, transmit, and sleep sequence can minimize battery consumption while preserving deterministic timing from the integrated 16-bit timer.
おすすめ
Portable Health-Monitoring Devices
The MSP430F2002TPW supports compact health-monitoring products that combine a low-power sensor interface with local control logic. Its I2C and SPI interfaces allow connection to sensing front ends or storage devices, and the comparator can implement simple threshold or alarm functions around analog inputs. The processor wakes from a low-power state in less than 1 microsecond, making it practical to sample intermittently instead of running continuously. Firmware and patient-data handling must fit within 1 KB Flash and 128 bytes SRAM, so the design should use short routines, bounded buffers, and interrupt-driven transfers rather than large display or protocol frameworks.
おすすめ
Industrial Measurement Instruments
The MSP430F2002TPW is appropriate for compact industrial measurement modules where low standby power and deterministic sampling matter. The 16 MHz CPU provides enough performance for sensor conditioning, calibration checks, and communications, while the integrated 16-bit timer supports periodic acquisition and timeout handling. SPI and I2C permit connection to industrial sensors, transceivers, or external nonvolatile memory without requiring dedicated serial-interface ICs. A practical design should isolate analog and digital return currents, use the manufacturer’s recommended bypass network, and validate the analog input path against the comparator and external converter requirements.
おすすめ
Smart-Home Sensor Nodes
The MSP430F2002TPW fits smart-home sensor nodes that remain connected to a low-energy network and wake only when motion, environmental, or contact sensing requires an update. Its SPI and I2C interfaces can connect radios, environmental sensors, and local storage, while five low-power modes reduce consumption between events. The ten I/O pins support discrete sensors, indicators, and control outputs without excessive multiplexing. Firmware architecture is critical because the MCU has only 1 KB Flash and 128 bytes SRAM; a compact protocol state machine, interrupt-driven serial transfers, and scheduled sleep periods will generally be easier to maintain than a layered communication stack.
おすすめ
Energy and Power Monitoring
The MSP430F2002TPW can support energy-monitoring modules that periodically measure current or voltage-related signals, record operating statistics, and report results through a serial interface. The comparator is useful for threshold events, the 16-bit timer establishes stable sampling intervals, and the low-power architecture reduces standby demand when the monitor is not actively sampling. External precision converters are appropriate when more than the comparator’s basic threshold function is required. Designers should preserve the low-power benefit by disabling unused peripherals, choosing an appropriate DCO operating point, and avoiding continuous polling of the serial bus when measurements are not being collected.
おすすめ
Low-Power Control Modules
The MSP430F2002TPW can implement compact control modules for actuators, indicators, and low-speed peripheral systems. Its ten I/O pins, comparator, and built-in timer provide the fundamental resources for state machines, timing, and analog threshold decisions, while SPI or I2C can connect a display driver, sensor, or remote communications device. The 16 MHz CPU allows responsive event handling without requiring a higher-power MCU, and the fast DCO wake-up supports duty-cycled operation. Because the memory budget is small, controls should use direct interrupt routines, bounded state tables, and peripheral-specific drivers, with brownout, reset, and clock behavior validated over the intended supply range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F2002TPW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F2001IPW | MSP430F2003IPW | MSP430F2012IPW | MSP430F2021IPW | MSP430F2033IPW |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
主な差別化要因
- Compact mixed-signal integration (vs MSP430F2001IPW)
- Fast event-driven wake-up (vs MSP430F2012IPW)
- Small optimized footprint (vs MSP430F2033IPW)
設計ノート
Place the manufacturer-recommended bypass capacitors immediately across the MSP430F2002TPW supply pins, with a short ground return and no branch current through analog or digital interface traces. The DCO permits rapid wake-up, so supply transients can follow processor activity rather than remaining slow and isolated. Validate brownout behavior, startup time, and rail tolerance across the intended temperature range.
Route the 14 TSSOP pads according to the exact PW package drawing and confirm that the PCB footprint has the correct lead pitch, span, and pin-1 orientation. Do not substitute a generic 14-pin SOIC footprint because body width, lead span, and pad geometry may differ. A mechanical cross-check against the manufacturer package drawing should occur before fabrication.
The 1 KB Flash and 128-byte SRAM are the principal design constraints. Estimate worst-case RAM use including stack, interrupt nesting, and serial buffers, and avoid architecture that depends on large libraries or floating-point-heavy routines. Use an interrupt-driven design and measure the actual linker map before production release.
Keep SPI and I2C routing short, provide pull-ups where required by the bus specification, and keep the oscillator and reset paths away from switching nodes. Although the MCU operates at up to 16 MHz, poor return paths can couple noise into sensitive measurements. Ground the shield or guard strategy around analog inputs according to the reference circuit and evaluate signal integrity with the final load configuration.
コンプライアンス情報
The manufacturer product page confirms environmental and quality information, but the retrieved excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.