MSP430F2619TPN - 16MHz 120KB Flash MCU | Texas Instruments
料号: MSP430F2619TPN ✓ 量产中MSP430F2619TPN 概述
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor device. The MSP430 family is based on a 16-bit RISC architecture and is commonly used for low-power embedded control. Its hierarchy includes MCU, embedded processor, mixed-signal microcontroller, and semiconductor, allowing the MSP430F2619TPN to serve both computation and analog signal-acquisition roles.
Key characteristics include a 16 MHz maximum clock, 120 KB flash memory, 4 KB SRAM, AES support, a 12-bit ADC, and a comparator. The integrated serial interfaces support UART, SPI, and I2C communication, while DMA can transfer data with reduced processor intervention. These features make the device suitable for industrial instrumentation, data acquisition, communications equipment, and embedded control products.
The MSP430F2619TPN belongs to TI's MSP430F2xx mixed-signal microcontroller family and provides a compact combination of low-power processing and mixed-signal peripherals. Its flash memory supports in-system firmware storage, while SRAM provides working memory for control loops and protocol handling. The 12-bit ADC offers 4096 possible digital codes for analog measurements, and the comparator can support threshold-based signal detection.
Typical applications include industrial sensor interfaces, low-power data loggers, building-control equipment, communications modules, portable measurement instruments, and embedded systems requiring multiple serial interfaces. Engineers can use the UART for host communication, SPI for faster peripheral data transfer, and I2C for low-pin-count sensors or memories. AES support is useful where firmware or stored data requires hardware-assisted encryption.
The 80-LQFP package exposes 64 I/O ports according to the listed device information, making it practical for designs requiring several digital interfaces and analog inputs. Board design should preserve adequate power and decoupling layout, route sensitive analog signals away from switching nodes, and follow the manufacturer's pin-description and application guidance. The MSP430F2xx Family User's Guide is the appropriate reference for peripheral operation and software configuration.
直接替换替代料: MSP430F2619TPN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MSP430F2619TPN (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, SRAM, Direct Memory Access, Hardware Multiplier.
MSP430F2618TPN
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F2617TPN
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MSP430F2616TPN
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MSP430F2619TPN 最大额定值与电气特性
| Product Type | 16-bit mixed-signal microcontroller |
| Processor Architecture | MSP430 CPU16 |
| Maximum Clock Speed | 16 MHz |
| Flash Memory | 120 KB |
| Flash Organization | 120K x 8 + 256 B |
| SRAM | 4 KB |
| ADC Resolution | 12 bit |
| ADC Code Range | 0 to 4095 codes |
| Integrated Comparator | Yes |
| AES Hardware | Yes |
| Serial Interfaces | UART, SPI, I2C |
| Direct Memory Access | DMA |
| Timer Resources | Timer |
| I/O Ports | 64 |
| Supply Voltage Range | 2.2 V to 3.6 V |
| 封装 | 80-LQFP, 12 mm x 12 mm |
| 安装类型 | Surface Mount |
| Operating Range | Industrial |
| Lifecycle Stage | Active |
MSP430F2619TPN 80-lqfp, 12 mm x 12 mm 引脚配置指南
MSP430F2619TPN(80-lqfp, 12 mm x 12 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MSP430F2619TPN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MSP430F2619TPN 适用于 6 应用s: Industrial Sensor Acquisition, Low-Power Data Logger, Building and HVAC Control, Secure Communications Endpoint, Portable Measurement Instrument, AES-Enabled Embedded Controller.
Industrial Sensor Acquisition
The MSP430F2619TPN fits industrial sensor acquisition because its 12-bit ADC provides 4096 possible measurement codes while the comparator supports threshold-based detection. Its 64 I/O ports leave capacity for sensors, digital inputs, indicators, and actuators. The 16 MHz CPU16 core can process acquired values, while DMA transfers data with limited processor intervention. With 120 KB of flash and 4 KB of SRAM, firmware can combine calibration, filtering, diagnostics, and communication in one device.
推荐
Low-Power Data Logger
The MSP430F2619TPN is suitable for a low-power data logger that periodically wakes, samples analog signals, stores results, and returns to a low-power state. Its 2.2 V to 3.6 V operating range supports low-voltage designs, while 120 KB of flash can hold firmware and logged configuration data. UART, SPI, and I2C provide options for removable storage or a communications link, and DMA can move blocks without tying up the CPU during transfer.
推荐
Building and HVAC Control
The MSP430F2619TPN supports building-control and HVAC monitoring where a controller must read analog sensors, detect thresholds, operate outputs, and communicate with a controller. The comparator provides a fast threshold function, the 12-bit ADC handles proportional measurements, and 64 I/O ports simplify connection of switches, relays, and digital sensors. UART, SPI, and I2C allow the same platform to bridge local sensing to a supervisory network.
推荐
Secure Communications Endpoint
The MSP430F2619TPN fits a communications endpoint requiring both protocol handling and hardware-assisted AES capability. Its 16 MHz core, 4 KB of SRAM, and DMA can support UART, SPI, or I2C data movement, while flash stores application firmware and protocol tables. The 80-LQFP package provides 64 I/O ports for status indicators, configuration controls, and multiple external interfaces, making the device suitable for compact embedded gateways and equipment-control nodes.
推荐
Portable Measurement Instrument
The MSP430F2619TPN is appropriate for a portable measurement instrument because it combines a 12-bit ADC, comparator, timer resources, and multiple serial interfaces in one package. The 16 MHz processor can execute measurement sequencing and local calculations, while 120 KB of flash accommodates firmware, calibration tables, and interface support. Its 2.2 V to 3.6 V supply range and low-power operating modes align with battery-operated instruments that must balance response time with energy consumption.
推荐
AES-Enabled Embedded Controller
The MSP430F2619TPN suits an AES-enabled embedded controller that must process sensor data, maintain serial connectivity, and protect stored or transmitted information. Integrated AES provides a dedicated cryptographic function without requiring a separate security device for compatible workflows. The CPU16 core can coordinate control tasks, DMA can support efficient data movement, and 64 I/O ports leave ample connections for local sensors and actuators. Firmware designers should still define key storage, authorization, and update procedures.
推荐
工程参考数据: MSP430F2619TPN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 80-LQFP (12 mm x 12 mm) |
| Brand | Texas Instruments |
| Processor Core | MSP430 CPU16, 16-bit |
| Maximum Clock Speed | 16 MHz |
| Flash Memory | 120 KB |
| SRAM | 4 KB |
| Operating Supply Voltage | 2.2 V to 3.6 V |
| ADC | 12-bit ADC |
| Communications | UART, SPI, I2C, DMA |
| Cryptography | AES |
关键差异点
- Broader flash and I/O allocation than the listed MSP430F2618TPM (对比 MSP430F2618TPM)
- Integrated AES support for security-sensitive embedded functions (对比 MSP430F2618TPM)
- Higher I/O count for multi-interface embedded equipment (对比 MSP430F2618TPM)
设计说明
Design the supply rail for the listed 2.2 V to 3.6 V operating range and place the required input and output capacitors close to their assigned pins. Keep analog and digital return-current paths controlled, especially when the ADC is used with weak sensor signals. Review the exact capacitor values, power sequencing, and maximum supply limits in the manufacturer datasheet before releasing the PCB layout.
Route the 12-bit ADC inputs away from UART, SPI, I2C, switching supplies, and other high-current digital paths. Use a compact analog input section, minimize loop area, and connect the exposed thermal and power structures according to the package drawing. Because the 80-LQFP device exposes 64 I/O ports, maintain consistent signal-return paths and avoid splitting analog and digital ground planes unnecessarily.
Do not treat the MSP430F2618TPM as a drop-in substitute for the MSP430F2619TPN: the listed packages are 64-LQFP and 80-LQFP respectively. Also do not infer the full pinout from the 64-I/O-port count. The package has dedicated supply, ground, analog, and digital pins in addition to I/O, so assign every land using the manufacturer pin-description table and complete a footprint comparison before substitution.
Configure the ADC acquisition path and DMA sequence for the required measurement bandwidth rather than assuming the maximum CPU clock determines conversion performance. Review the ADC sampling time, reference requirements, and timer interactions in the MSP430F261x documentation. For SPI or high-speed UART links, preserve return paths and validate edge-rate-dependent behavior with the intended cable, connector, and peripheral.
合规信息
The device is listed as Active and in the industrial operating range. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses were not stated in the available manufacturer and distributor information.