OPA453TA - 80V High-Voltage Operational Amplifier | Texas Instruments
料号: OPA453TA ✓ 量产中OPA453TA 概述
An operational amplifier is an analog signal-conditioning semiconductor that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the broader hierarchy of semiconductor components, the OPA453TA belongs to the operational-amplifier, analog-amplifier, and signal-conditioning families. Its high-voltage capability allows it to process signals referenced to elevated supply voltages without requiring the signal to remain near ground.
The OPA453TA provides a 7.5 MHz gain-bandwidth product and a 38 V/µs slew rate, making it suitable for moderate-bandwidth closed-loop systems operating above a gain of 5. The device supports supply voltages from 20 V to 80 V, equivalent to ±40 V operation around a midpoint reference. Its laser-trimmed monolithic construction is designed to maintain low-level accuracy and a wide output swing across the complete supply range.
Output drive reaches 50 mA continuously, while the output can swing approximately 1 V from either supply rail. Thermal shutdown and output-current limiting provide internal protection against overload conditions. These characteristics make the amplifier useful in high-side sensing, current measurement, power-control loops, test equipment, and signal-conditioning stages where both voltage handling and load capability are important.
The 50 mA output capability can drive resistive and moderate capacitive loads, but it does not make the OPA453TA a general-purpose power buffer. Designers should account for output-stage limitations, thermal dissipation, stability with the selected gain network, and the maximum input and output voltage ranges when establishing operating margins.
Common applications include high-voltage current feedback, power-supply error amplifiers, industrial sensor interfaces, audio and instrumentation signal paths, and analog control boards. Keep input and output voltages inside their rated common-mode and swing limits, place the TO-220 package for effective heat transfer, and verify stability at the minimum intended closed-loop gain.
This product page combines the manufacturer's core specifications with application-oriented guidance for power budgeting, layout, gain selection, and replacement assessment. It also distinguishes genuine pin-compatible choices from devices that merely share a similar high-voltage capability, helping engineers narrow the selection to parts suitable for an existing PCB footprint.
直接替换替代料: OPA453TA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
OPA452TA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
OPA453TA 最大额定值与电气特性
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 1 circuit |
| Maximum Total Supply Voltage | 80 V |
| Supply Voltage Range | 20 V to 80 V |
| Dual-Supply Operating Voltage | ±40 V |
| Gain-Bandwidth Product | 7.5 MHz |
| Slew Rate | 38 V/µs |
| Continuous Output Current | 50 mA |
| Minimum Stable Gain | Greater than 5 |
| Output Voltage Swing | Approximately 1 V from the supply rails |
| 工作温度范围 | -40°C to +125°C |
| 封装 | TO-220-7 |
| 安装类型 | Through-hole |
| Protection | Thermal shutdown and output current limiting |
| RoHS 状态 | RoHS3 compliant |
| 输出类型 | Rail-to-rail output, approximately 1 V from each rail |
OPA453TA to-220-7 引脚配置指南
OPA453TA(to-220-7 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: OPA453TA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
OPA453TA 适用于 6 应用s: Power-Supply Error Amplifier, High-Side Current Sensing, Industrial Sensor Interface, Precision Instrumentation Buffer, Audio and Low-Level Signal Path, Motor and Solenoid Control.
Power-Supply Error Amplifier
OPA453TA fits high-voltage power-supply feedback because it accepts a total supply up to 80 V, equivalent to ±40 V operation, while providing 50 mA continuous output drive. Its 38 V/µs slew rate allows the output to respond quickly when the feedback controller commands a correction, and the 7.5 MHz gain-bandwidth product supports control loops operated above a gain of 5. The TO-220-7 package also provides a practical path for dissipating heat in a linear control stage. Confirm that the compensation network remains stable at the selected closed-loop gain and that the output does not exceed its approximately 1 V-from-rail swing limit.
推荐
High-Side Current Sensing
OPA453TA is suitable for current-sense amplification in systems where the shunt voltage is referenced to an elevated supply and the amplifier must accommodate a wide common-mode range. Its 20 V to 80 V total supply capability removes the need to operate the amplifier near a conventional low-voltage rail, while the 50 mA output capability supports instrumented sensor-conditioning stages. The 7.5 MHz gain-bandwidth product can preserve bandwidth in moderate-gain current-loop paths. Check the exact common-mode and output limits in the manufacturer datasheet, and use gains greater than 5 as intended for this device.
推荐
Industrial Sensor Interface
OPA453TA can condition sensor signals in industrial equipment where available supply voltage exceeds the range of conventional precision operational amplifiers. Its 80 V maximum total supply supports elevated analog rails, and its wide output swing allows approximately 1 V headroom at either limit. The laser-trimmed monolithic implementation is intended to preserve low-level accuracy across the supply range, making the device useful for buffered sensor signals and analog control inputs. The -40°C to +125°C operating range supports industrial environments, although the complete sensing chain must also satisfy its own accuracy, noise, and safety requirements.
推荐
Precision Instrumentation Buffer
OPA453TA supports instrumentation and test equipment that require an amplifier to operate from high-voltage supplies and drive a moderate resistive load. Its 50 mA continuous output current exceeds the capability of many small-signal precision amplifiers, while the 7.5 MHz gain-bandwidth product provides useful closed-loop bandwidth at gains above 5. The approximately 1 V output margin from each supply rail defines the usable large-signal range. Designers should verify input bias current, offset, common-mode range, and noise against their instrumentation requirements before using the device as a low-level measurement front end.
推荐
Audio and Low-Level Signal Path
OPA453TA can amplify low-level audio or control signals in equipment powered from elevated rails. Its 38 V/µs slew rate supports faithful reproduction of moderate-frequency waveforms, while the 7.5 MHz gain-bandwidth product is sufficient for many non-audio-bandwidth instrumentation paths. Because the device is optimized for gains greater than 5, it is better aligned with gain-shaping stages than unity-gain buffers. Check distortion, output-current demand, and capacitive-load stability in the final network, especially when driving long cables, connectors, or downstream protection devices.
推荐
Motor and Solenoid Control
OPA453TA can serve in motor-control and solenoid-driver feedback paths where control electronics operate from high-voltage rails. The 50 mA output drive is useful for driving a control or monitoring stage, and the 38 V/µs slew rate allows rapid response to command changes. Thermal shutdown and output-current limiting add protection around the output stage. The device is not a direct power MOSFET or relay driver, so use it for sensing and control rather than the load current itself. Account for inductive transients, ground offsets, and common-mode excursions at the connected switching node.
推荐
工程参考数据: OPA453TA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | OPA452TA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | TO-220-7 | TO-220-7 |
| Maximum Total Supply Voltage | 80 V | 80 V |
| Supply Voltage Range | 20 V to 80 V | 20 V to 80 V |
| Continuous Output Current | 50 mA | 50 mA |
| Gain-Bandwidth Product | 7.5 MHz | 1.8 MHz |
| Stability | Optimized for gains greater than 5 | Unity-gain stable |
| Output Voltage Swing | Approximately 1 V from the supply rails | Approximately 1 V from the supply rails |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C |
关键差异点
- Higher gain-bandwidth product than the unity-stable family alternative (对比 OPA452TA)
- Designed for higher closed-loop gain operation (对比 OPA452TA)
- High-voltage operation with substantial load drive (对比 OPA452TA)
设计说明
Calculate the worst-case amplifier dissipation from the actual output voltage, load current, and supply currents rather than relying only on the 50 mA output-current rating. Estimated: with a 40 V supply, an average output voltage of 20 V, and a 10 mA load, the approximate output-stage dissipation is 200 mW before including other bias paths. Provide copper around the TO-220 tab, minimize nearby thermal obstruction, and verify the final junction temperature across ambient temperature and load conditions.
Do not treat OPA453TA as a unity-gain-stable general-purpose amplifier. It is optimized for gains greater than 5, so the feedback ratio, compensation network, target noise gain, and resulting closed-loop bandwidth must be reviewed together. If the circuit must remain at unity gain, OPA452TA is the family member designed for that configuration. Changing either part without recalculating stability can create ringing, unexpected phase margin, or oscillation in the final board.
Route the high-voltage and signal-return paths carefully in the TO-220-7 footprint. Keep sensitive input and feedback traces away from switching nodes and power-supply inductors, use a compact ground-return strategy, and maintain clearance appropriate to the maximum 80 V operating environment. Connect the tab according to the selected electrical configuration and manufacturer guidance. If the tab is used for a power connection rather than heat sinking alone, verify that the PCB copper and isolation requirements support that arrangement.
Validate output stability with the actual load, including cable capacitance, input filtering, protection diodes, and connector capacitance. The 38 V/µs slew rate gives the output stage substantial drive capability, but excessive capacitive loading can move the output into instability or current limiting. Keep feedback routing short, place compensation components close to the relevant pins, and measure the completed design across supply, temperature, and load extremes rather than relying only on simulation.
合规信息
OPA453TA is identified as RoHS3 compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification information was established for the exact device.