Texas Instruments

OPA453TA - 80V High-Voltage Operational Amplifier | Texas Instruments

部品番号: OPA453TA ✓ 生産中
80 V Vdss 50 mA Id TO-220-7 Package
MOQ: 1 |

OPA453TA 概要

Texas Instruments OPA453TA is a high-voltage operational amplifier designed for an 80 V total supply range, 50 mA continuous output-current capability, and operation from gains greater than 5. It is packaged in a 7-pin TO-220 package and is intended for instrumentation, industrial control, and power-supply feedback applications where conventional low-voltage amplifiers cannot withstand the available supply rails.

An operational amplifier is an analog signal-conditioning semiconductor that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the broader hierarchy of semiconductor components, the OPA453TA belongs to the operational-amplifier, analog-amplifier, and signal-conditioning families. Its high-voltage capability allows it to process signals referenced to elevated supply voltages without requiring the signal to remain near ground.

The OPA453TA provides a 7.5 MHz gain-bandwidth product and a 38 V/µs slew rate, making it suitable for moderate-bandwidth closed-loop systems operating above a gain of 5. The device supports supply voltages from 20 V to 80 V, equivalent to ±40 V operation around a midpoint reference. Its laser-trimmed monolithic construction is designed to maintain low-level accuracy and a wide output swing across the complete supply range.

Output drive reaches 50 mA continuously, while the output can swing approximately 1 V from either supply rail. Thermal shutdown and output-current limiting provide internal protection against overload conditions. These characteristics make the amplifier useful in high-side sensing, current measurement, power-control loops, test equipment, and signal-conditioning stages where both voltage handling and load capability are important.

The 50 mA output capability can drive resistive and moderate capacitive loads, but it does not make the OPA453TA a general-purpose power buffer. Designers should account for output-stage limitations, thermal dissipation, stability with the selected gain network, and the maximum input and output voltage ranges when establishing operating margins.

Common applications include high-voltage current feedback, power-supply error amplifiers, industrial sensor interfaces, audio and instrumentation signal paths, and analog control boards. Keep input and output voltages inside their rated common-mode and swing limits, place the TO-220 package for effective heat transfer, and verify stability at the minimum intended closed-loop gain.

This product page combines the manufacturer's core specifications with application-oriented guidance for power budgeting, layout, gain selection, and replacement assessment. It also distinguishes genuine pin-compatible choices from devices that merely share a similar high-voltage capability, helping engineers narrow the selection to parts suitable for an existing PCB footprint.

ドロップイン代替品: OPA453TA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

OPA452TA

✅ ドロップイン ⚠️ 仕様未検証
📦 TO-220-7
OPA452TA is unity-gain stable with 1.8 MHz GBW versus OPA453TA's greater-than-5 gain optimization and 7.5 MHz GBW; GBW is 76% of the target value

📋 参考代替品(カタログ未掲載)

OPA453TA 最大定格&電気的特性

Amplifier Type General-purpose operational amplifier
Number of Circuits 1 circuit
Maximum Total Supply Voltage 80 V
Supply Voltage Range 20 V to 80 V
Dual-Supply Operating Voltage ±40 V
Gain-Bandwidth Product 7.5 MHz
Slew Rate 38 V/µs
Continuous Output Current 50 mA
Minimum Stable Gain Greater than 5
Output Voltage Swing Approximately 1 V from the supply rails
動作温度範囲 -40°C to +125°C
パッケージ TO-220-7
実装タイプ Through-hole
Protection Thermal shutdown and output current limiting
RoHS ステータス RoHS3 compliant
出力タイプ Rail-to-rail output, approximately 1 V from each rail

OPA453TA to-220-7 ピン配置ガイド

OPA453TA (to-220-7 パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

OPA453TA の to-220-7 パッケージピン配置図

詳細なピン配置データはありません: OPA453TA.

詳細は データシート をご参照ください。

主な用途

OPA453TA の用途: 6 件s: Power-Supply Error Amplifier, High-Side Current Sensing, Industrial Sensor Interface, Precision Instrumentation Buffer, Audio and Low-Level Signal Path, Motor and Solenoid Control.

⚡

Power-Supply Error Amplifier

OPA453TA fits high-voltage power-supply feedback because it accepts a total supply up to 80 V, equivalent to ±40 V operation, while providing 50 mA continuous output drive. Its 38 V/µs slew rate allows the output to respond quickly when the feedback controller commands a correction, and the 7.5 MHz gain-bandwidth product supports control loops operated above a gain of 5. The TO-220-7 package also provides a practical path for dissipating heat in a linear control stage. Confirm that the compensation network remains stable at the selected closed-loop gain and that the output does not exceed its approximately 1 V-from-rail swing limit.

🏭

High-Side Current Sensing

OPA453TA is suitable for current-sense amplification in systems where the shunt voltage is referenced to an elevated supply and the amplifier must accommodate a wide common-mode range. Its 20 V to 80 V total supply capability removes the need to operate the amplifier near a conventional low-voltage rail, while the 50 mA output capability supports instrumented sensor-conditioning stages. The 7.5 MHz gain-bandwidth product can preserve bandwidth in moderate-gain current-loop paths. Check the exact common-mode and output limits in the manufacturer datasheet, and use gains greater than 5 as intended for this device.

🏭

Industrial Sensor Interface

OPA453TA can condition sensor signals in industrial equipment where available supply voltage exceeds the range of conventional precision operational amplifiers. Its 80 V maximum total supply supports elevated analog rails, and its wide output swing allows approximately 1 V headroom at either limit. The laser-trimmed monolithic implementation is intended to preserve low-level accuracy across the supply range, making the device useful for buffered sensor signals and analog control inputs. The -40°C to +125°C operating range supports industrial environments, although the complete sensing chain must also satisfy its own accuracy, noise, and safety requirements.

🔧

Precision Instrumentation Buffer

OPA453TA supports instrumentation and test equipment that require an amplifier to operate from high-voltage supplies and drive a moderate resistive load. Its 50 mA continuous output current exceeds the capability of many small-signal precision amplifiers, while the 7.5 MHz gain-bandwidth product provides useful closed-loop bandwidth at gains above 5. The approximately 1 V output margin from each supply rail defines the usable large-signal range. Designers should verify input bias current, offset, common-mode range, and noise against their instrumentation requirements before using the device as a low-level measurement front end.

🎧

Audio and Low-Level Signal Path

OPA453TA can amplify low-level audio or control signals in equipment powered from elevated rails. Its 38 V/µs slew rate supports faithful reproduction of moderate-frequency waveforms, while the 7.5 MHz gain-bandwidth product is sufficient for many non-audio-bandwidth instrumentation paths. Because the device is optimized for gains greater than 5, it is better aligned with gain-shaping stages than unity-gain buffers. Check distortion, output-current demand, and capacitive-load stability in the final network, especially when driving long cables, connectors, or downstream protection devices.

🔧

Motor and Solenoid Control

OPA453TA can serve in motor-control and solenoid-driver feedback paths where control electronics operate from high-voltage rails. The 50 mA output drive is useful for driving a control or monitoring stage, and the 38 V/µs slew rate allows rapid response to command changes. Thermal shutdown and output-current limiting add protection around the output stage. The device is not a direct power MOSFET or relay driver, so use it for sensing and control rather than the load current itself. Account for inductive transients, ground offsets, and common-mode excursions at the connected switching node.

What is the operating voltage range of OPA453TA?
The OPA453TA operates from 20 V to 80 V across its total supply terminals, corresponding to ±40 V operation around a midpoint reference. According to the Texas Instruments OPA453 datasheet, specifications are maintained over the full power-supply range rather than only at a nominal supply voltage. Designers should also observe the input common-mode limits and keep the output within the specified swing, which extends approximately 1 V from either rail.
What are the key specifications of OPA453TA that engineers should know?
The OPA453TA combines an 80 V maximum total supply, 50 mA continuous output drive, 7.5 MHz gain-bandwidth product, and 38 V/µs slew rate in a TO-220-7 package. The manufacturer specifies operation from -40°C to +125°C and includes thermal-shutdown and output-current-limit protection. It is optimized for gains greater than 5 rather than unity-gain operation, making the minimum intended gain an important schematic and stability check.
What is OPA453TA used for?
OPA453TA is used for high-voltage analog signal amplification, including power-supply feedback, high-side current sensing, industrial instrumentation, and control-signal conditioning. Its 80 V supply capability allows operation around elevated rails, while its 50 mA output drive provides more load capability than many conventional precision amplifiers. According to the Texas Instruments OPA453 product information, the device maintains accuracy and output swing over the complete supply range.
Can OPA453TA drive 50 mA continuously?
Yes, the Texas Instruments OPA453 datasheet specifies 50 mA of continuous output-current capability. That rating applies within the device's voltage, temperature, output-swing, and thermal limits; it does not remove the need to check power dissipation or load behavior. The amplifier also provides output-current limiting and thermal shutdown. Keep the TO-220 thermal path connected to an appropriate copper area and verify worst-case operating temperature.
Is OPA453TA unity-gain stable?
No, OPA453TA is optimized for closed-loop gains greater than 5. The related OPA452 is the unity-gain-stable member of the family, whereas OPA453 uses its 7.5 MHz bandwidth for higher-gain applications. According to the Texas Instruments OPA453 product page, this gain distinction is intentional. Adding compensation or changing the feedback network to obtain unity-gain operation can affect stability and should be validated with the manufacturer's guidance.
What is the gain-bandwidth product and slew rate of OPA453TA?
OPA453TA has a 7.5 MHz gain-bandwidth product and a 38 V/µs slew rate. The bandwidth supports closed-loop amplification at moderate gains above the recommended threshold of 5, while the slew rate determines how quickly the output can follow large voltage changes. For sinusoidal signals, the actual closed-loop bandwidth also depends on the selected noise-gain network, load, and supply conditions documented in the Texas Instruments datasheet.
Where can I download the OPA453TA datasheet PDF?
The official OPA453TA documentation is available through the Texas Instruments OPA453 product page at https://www.ti.com/product/OPA453, where the manufacturer provides the product datasheet and support documents. The OPA453TA is the TO-220-7 orderable version of that device family. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet when assigning PCB connections, tolerances, and worst-case limits.
Where can I find the OPA453TA pinout?
The OPA453TA pinout is published in the pin-configuration section of the Texas Instruments OPA453 datasheet, linked from the official OPA453 product page. The device uses a 7-pin TO-220 package, and engineers should map supply, output, input, and compensation connections directly from that table rather than inferring them from another package in the OPA45x family. Check the selected suffix and package drawing before finalizing PCB artwork.
What is the best drop-in replacement for OPA453TA?
OPA452TA is the closest same-manufacturer alternative in the TO-220-7 family, but it is not an unconditional functional replacement for OPA453TA. It is unity-gain stable with a 1.8 MHz gain-bandwidth product, while OPA453TA is intended for gains greater than 5 and provides 7.5 MHz bandwidth. Before substituting it, verify the required closed-loop gain, stability, output-current demand, and every pin connection against both manufacturer datasheets.
Can OPA452TA replace OPA453TA?
OPA452TA can serve as a package-level substitution only after circuit-level verification. It uses the TO-220-7 package and shares the family's high-voltage architecture, but its unity-gain stability and 1.8 MHz gain-bandwidth product differ from the greater-than-5 gain optimization and 7.5 MHz bandwidth of OPA453TA. Existing feedback and compensation networks designed around OPA453TA may not preserve the same gain, phase margin, or transient response.
What is a Texas Instruments equivalent for OPA453TA?
OPA452TA is the relevant Texas Instruments comparison because it belongs to the same OPA45x high-voltage operational-amplifier family and is offered in a TO-220-7 package. It is not an exact drop-in equivalent in every circuit because its stability and bandwidth differ. The manufacturer describes OPA452 as unity-gain stable with 1.8 MHz bandwidth and OPA453 as optimized for gains greater than 5 with 7.5 MHz bandwidth.
When should I choose OPA453TA instead of OPA452TA?
Choose OPA453TA when the closed-loop gain is greater than 5 and the design benefits from its 7.5 MHz gain-bandwidth product and 38 V/µs slew rate. Choose OPA452TA when unity-gain stability is required or the lower 1.8 MHz bandwidth is sufficient. Both families target high-voltage operation and 50 mA output drive, so gain configuration and dynamic response—not supply voltage alone—should determine the choice.
Is OPA453TA suitable for power-supply feedback?
OPA453TA is suitable for power-supply feedback and high-side sensing because it supports an 80 V total supply and provides 50 mA continuous output-current capability. Its wide output swing lets the amplifier drive control circuitry while approaching either supply rail within about 1 V. Confirm the control-loop bandwidth, common-mode limits, output loading, and compensation requirements against the specific power-conversion topology before releasing the design.
Where can I buy OPA453TA and what is its price?
Use the Request a Quote form on this page to ask for OPA453TA availability, current pricing, and the required order quantity. The platform can return a current quotation tied to the exact TO-220-7 suffix. Pricing and stock change with market conditions, so request the latest commercial terms rather than relying on an outdated listing or a generic family-level price.
What is the lead time for OPA453TA?
The current OPA453TA lead time should be requested through the Request a Quote form on this page using the exact MPN and required quantity. Manufacturing capacity, package inventory, and order quantity can change the schedule, so a historical delivery estimate is not a reliable commitment. Include your required delivery date, approved source needs, and quantity so the quotation can reflect the actual procurement request.
Is OPA453TA in stock?
Current OPA453TA inventory should be confirmed through the Request a Quote form on this page. The form accepts the exact MPN, quantity, and delivery requirements for a current response. Because the device is listed as active, it remains a legitimate design choice, but an active lifecycle designation does not by itself guarantee a specific stock quantity or immediate shipment.
How should OPA453TA be mounted for reliable operation?
Mount OPA453TA in a through-hole TO-220-7 position with the tab electrically and thermally connected as required by the selected circuit. Provide a generous copper path for heat dissipation and avoid placing the device near temperature-sensitive parts without thermal review. According to the manufacturer feature set, the amplifier includes thermal shutdown, but reliable operation still depends on keeping junction temperature within its rated -40°C to +125°C environment.

エンジニアリング参考データ: OPA453TA — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA453TA for elevated-rail analog systems that require operation across a 20 V to 80 V total supply range, more than 5 closed-loop gain, 50 mA continuous output drive, and a 7.5 MHz gain-bandwidth product. It is particularly appropriate for power-supply feedback, high-side current sensing, and industrial signal conditioning. Choose OPA452TA when the amplifier must operate at unity gain and its lower 1.8 MHz bandwidth is acceptable. No other validated drop-in alternatives were established for the exact TO-220-7 OPA453TA configuration, so do not substitute a part merely because it is described as a high-voltage operational amplifier. For either family member, verify the complete pin configuration, common-mode range, output swing, thermal performance, and stability with the intended feedback network before approving a substitution.

代替品との比較

パラメータ この製品 OPA452TA
Brand Texas Instruments Texas Instruments
Package TO-220-7 TO-220-7
Maximum Total Supply Voltage 80 V 80 V
Supply Voltage Range 20 V to 80 V 20 V to 80 V
Continuous Output Current 50 mA 50 mA
Gain-Bandwidth Product 7.5 MHz 1.8 MHz
Stability Optimized for gains greater than 5 Unity-gain stable
Output Voltage Swing Approximately 1 V from the supply rails Approximately 1 V from the supply rails
Operating Temperature Range -40°C to +125°C -40°C to +125°C

主な差別化要因

  • Higher gain-bandwidth product than the unity-stable family alternative (vs OPA452TA)
  • Designed for higher closed-loop gain operation (vs OPA452TA)
  • High-voltage operation with substantial load drive (vs OPA452TA)

設計ノート

Calculate the worst-case amplifier dissipation from the actual output voltage, load current, and supply currents rather than relying only on the 50 mA output-current rating. Estimated: with a 40 V supply, an average output voltage of 20 V, and a 10 mA load, the approximate output-stage dissipation is 200 mW before including other bias paths. Provide copper around the TO-220 tab, minimize nearby thermal obstruction, and verify the final junction temperature across ambient temperature and load conditions.

Do not treat OPA453TA as a unity-gain-stable general-purpose amplifier. It is optimized for gains greater than 5, so the feedback ratio, compensation network, target noise gain, and resulting closed-loop bandwidth must be reviewed together. If the circuit must remain at unity gain, OPA452TA is the family member designed for that configuration. Changing either part without recalculating stability can create ringing, unexpected phase margin, or oscillation in the final board.

Route the high-voltage and signal-return paths carefully in the TO-220-7 footprint. Keep sensitive input and feedback traces away from switching nodes and power-supply inductors, use a compact ground-return strategy, and maintain clearance appropriate to the maximum 80 V operating environment. Connect the tab according to the selected electrical configuration and manufacturer guidance. If the tab is used for a power connection rather than heat sinking alone, verify that the PCB copper and isolation requirements support that arrangement.

Validate output stability with the actual load, including cable capacitance, input filtering, protection diodes, and connector capacitance. The 38 V/µs slew rate gives the output stage substantial drive capability, but excessive capacitive loading can move the output into instability or current limiting. Keep feedback routing short, place compensation components close to the relevant pins, and measure the completed design across supply, temperature, and load extremes rather than relying only on simulation.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

OPA453TA is identified as RoHS3 compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification information was established for the exact device.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

OPA453TA datasheet OPA453TA datasheet pdf OPA453TA pinout OPA453TA TO-220-7 pinout Texas Instruments OPA453TA OPA453TA 80V 50mA op amp OPA453TA 7.5MHz gain bandwidth OPA453TA equivalent OPA453TA replacement OPA453TA vs OPA452TA OPA453TA high side current sense OPA453TA price OPA453TA stock OPA453TA lead time

関連部品&用語

Texas Instruments OPA453TA OPA452TA OPA453 OPA452 operational amplifier analog amplifier signal-conditioning IC high-voltage amplifier gain-bandwidth product GBW slew rate TO-220-7 TO-220 package family through-hole package surface-mount alternative 80 V supply 50 mA output current thermal shutdown output current limiting power-supply feedback high-side current sensing industrial instrumentation RoHS3 REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示