OPA453TA - 80V High-Voltage Operational Amplifier | Texas Instruments
MPN: OPA453TA ✓ פעילOPA453TA סקירה
An operational amplifier is an analog signal-conditioning semiconductor that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the broader hierarchy of semiconductor components, the OPA453TA belongs to the operational-amplifier, analog-amplifier, and signal-conditioning families. Its high-voltage capability allows it to process signals referenced to elevated supply voltages without requiring the signal to remain near ground.
The OPA453TA provides a 7.5 MHz gain-bandwidth product and a 38 V/µs slew rate, making it suitable for moderate-bandwidth closed-loop systems operating above a gain of 5. The device supports supply voltages from 20 V to 80 V, equivalent to ±40 V operation around a midpoint reference. Its laser-trimmed monolithic construction is designed to maintain low-level accuracy and a wide output swing across the complete supply range.
Output drive reaches 50 mA continuously, while the output can swing approximately 1 V from either supply rail. Thermal shutdown and output-current limiting provide internal protection against overload conditions. These characteristics make the amplifier useful in high-side sensing, current measurement, power-control loops, test equipment, and signal-conditioning stages where both voltage handling and load capability are important.
The 50 mA output capability can drive resistive and moderate capacitive loads, but it does not make the OPA453TA a general-purpose power buffer. Designers should account for output-stage limitations, thermal dissipation, stability with the selected gain network, and the maximum input and output voltage ranges when establishing operating margins.
Common applications include high-voltage current feedback, power-supply error amplifiers, industrial sensor interfaces, audio and instrumentation signal paths, and analog control boards. Keep input and output voltages inside their rated common-mode and swing limits, place the TO-220 package for effective heat transfer, and verify stability at the minimum intended closed-loop gain.
This product page combines the manufacturer's core specifications with application-oriented guidance for power budgeting, layout, gain selection, and replacement assessment. It also distinguishes genuine pin-compatible choices from devices that merely share a similar high-voltage capability, helping engineers narrow the selection to parts suitable for an existing PCB footprint.
חלופות תחליף ישיר עבור OPA453TA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
OPA452TA
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
OPA453TA דירוגים מרביים ומאפיינים חשמליים
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 1 circuit |
| Maximum Total Supply Voltage | 80 V |
| Supply Voltage Range | 20 V to 80 V |
| Dual-Supply Operating Voltage | ±40 V |
| Gain-Bandwidth Product | 7.5 MHz |
| Slew Rate | 38 V/µs |
| Continuous Output Current | 50 mA |
| Minimum Stable Gain | Greater than 5 |
| Output Voltage Swing | Approximately 1 V from the supply rails |
| טווח טמפרטורת פעולה | -40°C to +125°C |
| מארז | TO-220-7 |
| סוג הרכבה | Through-hole |
| Protection | Thermal shutdown and output current limiting |
| סטטוס RoHS | RoHS3 compliant |
| סוג פלט | Rail-to-rail output, approximately 1 V from each rail |
מדריך תצורת פינים של OPA453TA to-220-7
תצורת פינים עבור OPA453TA (מארזת to-220-7). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור OPA453TA.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
OPA453TA מתאים עבור 6 יישוםs: Power-Supply Error Amplifier, High-Side Current Sensing, Industrial Sensor Interface, Precision Instrumentation Buffer, Audio and Low-Level Signal Path, Motor and Solenoid Control.
Power-Supply Error Amplifier
OPA453TA fits high-voltage power-supply feedback because it accepts a total supply up to 80 V, equivalent to ±40 V operation, while providing 50 mA continuous output drive. Its 38 V/µs slew rate allows the output to respond quickly when the feedback controller commands a correction, and the 7.5 MHz gain-bandwidth product supports control loops operated above a gain of 5. The TO-220-7 package also provides a practical path for dissipating heat in a linear control stage. Confirm that the compensation network remains stable at the selected closed-loop gain and that the output does not exceed its approximately 1 V-from-rail swing limit.
מומלץ
High-Side Current Sensing
OPA453TA is suitable for current-sense amplification in systems where the shunt voltage is referenced to an elevated supply and the amplifier must accommodate a wide common-mode range. Its 20 V to 80 V total supply capability removes the need to operate the amplifier near a conventional low-voltage rail, while the 50 mA output capability supports instrumented sensor-conditioning stages. The 7.5 MHz gain-bandwidth product can preserve bandwidth in moderate-gain current-loop paths. Check the exact common-mode and output limits in the manufacturer datasheet, and use gains greater than 5 as intended for this device.
מומלץ
Industrial Sensor Interface
OPA453TA can condition sensor signals in industrial equipment where available supply voltage exceeds the range of conventional precision operational amplifiers. Its 80 V maximum total supply supports elevated analog rails, and its wide output swing allows approximately 1 V headroom at either limit. The laser-trimmed monolithic implementation is intended to preserve low-level accuracy across the supply range, making the device useful for buffered sensor signals and analog control inputs. The -40°C to +125°C operating range supports industrial environments, although the complete sensing chain must also satisfy its own accuracy, noise, and safety requirements.
מומלץ
Precision Instrumentation Buffer
OPA453TA supports instrumentation and test equipment that require an amplifier to operate from high-voltage supplies and drive a moderate resistive load. Its 50 mA continuous output current exceeds the capability of many small-signal precision amplifiers, while the 7.5 MHz gain-bandwidth product provides useful closed-loop bandwidth at gains above 5. The approximately 1 V output margin from each supply rail defines the usable large-signal range. Designers should verify input bias current, offset, common-mode range, and noise against their instrumentation requirements before using the device as a low-level measurement front end.
מומלץ
Audio and Low-Level Signal Path
OPA453TA can amplify low-level audio or control signals in equipment powered from elevated rails. Its 38 V/µs slew rate supports faithful reproduction of moderate-frequency waveforms, while the 7.5 MHz gain-bandwidth product is sufficient for many non-audio-bandwidth instrumentation paths. Because the device is optimized for gains greater than 5, it is better aligned with gain-shaping stages than unity-gain buffers. Check distortion, output-current demand, and capacitive-load stability in the final network, especially when driving long cables, connectors, or downstream protection devices.
מומלץ
Motor and Solenoid Control
OPA453TA can serve in motor-control and solenoid-driver feedback paths where control electronics operate from high-voltage rails. The 50 mA output drive is useful for driving a control or monitoring stage, and the 38 V/µs slew rate allows rapid response to command changes. Thermal shutdown and output-current limiting add protection around the output stage. The device is not a direct power MOSFET or relay driver, so use it for sensing and control rather than the load current itself. Account for inductive transients, ground offsets, and common-mode excursions at the connected switching node.
מומלץ
נתוני עזר הנדסיים עבור OPA453TA — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | OPA452TA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | TO-220-7 | TO-220-7 |
| Maximum Total Supply Voltage | 80 V | 80 V |
| Supply Voltage Range | 20 V to 80 V | 20 V to 80 V |
| Continuous Output Current | 50 mA | 50 mA |
| Gain-Bandwidth Product | 7.5 MHz | 1.8 MHz |
| Stability | Optimized for gains greater than 5 | Unity-gain stable |
| Output Voltage Swing | Approximately 1 V from the supply rails | Approximately 1 V from the supply rails |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C |
מבדילים עיקריים
- Higher gain-bandwidth product than the unity-stable family alternative (לעומתOPA452TA)
- Designed for higher closed-loop gain operation (לעומתOPA452TA)
- High-voltage operation with substantial load drive (לעומתOPA452TA)
הערות תכנון
Calculate the worst-case amplifier dissipation from the actual output voltage, load current, and supply currents rather than relying only on the 50 mA output-current rating. Estimated: with a 40 V supply, an average output voltage of 20 V, and a 10 mA load, the approximate output-stage dissipation is 200 mW before including other bias paths. Provide copper around the TO-220 tab, minimize nearby thermal obstruction, and verify the final junction temperature across ambient temperature and load conditions.
Do not treat OPA453TA as a unity-gain-stable general-purpose amplifier. It is optimized for gains greater than 5, so the feedback ratio, compensation network, target noise gain, and resulting closed-loop bandwidth must be reviewed together. If the circuit must remain at unity gain, OPA452TA is the family member designed for that configuration. Changing either part without recalculating stability can create ringing, unexpected phase margin, or oscillation in the final board.
Route the high-voltage and signal-return paths carefully in the TO-220-7 footprint. Keep sensitive input and feedback traces away from switching nodes and power-supply inductors, use a compact ground-return strategy, and maintain clearance appropriate to the maximum 80 V operating environment. Connect the tab according to the selected electrical configuration and manufacturer guidance. If the tab is used for a power connection rather than heat sinking alone, verify that the PCB copper and isolation requirements support that arrangement.
Validate output stability with the actual load, including cable capacitance, input filtering, protection diodes, and connector capacitance. The 38 V/µs slew rate gives the output stage substantial drive capability, but excessive capacitive loading can move the output into instability or current limiting. Keep feedback routing short, place compensation components close to the relevant pins, and measure the completed design across supply, temperature, and load extremes rather than relying only on simulation.
מידע על תאימות
OPA453TA is identified as RoHS3 compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification information was established for the exact device.