Texas Instruments

OPA656UB - 550MHz Unity-Gain FET Op Amp | Texas Instruments

料号: OPA656UB ✓ 量产中
±6 V Vdss 8-pin SOIC Package
最小起订量: 1 |

OPA656UB 概述

The Texas Instruments OPA656UB is a wideband, unity-gain stable, FET-input operational amplifier designed for high-speed signal conditioning. Its key characteristics include 550 MHz gain-bandwidth performance, a single ±6 V supply range, and an 8-pin SOIC package. The FET input stage supports high-impedance sensing, while unity-gain stability allows the amplifier to operate directly at a closed-loop gain of one without the dynamic-range penalties commonly associated with decompensated amplifiers. OPA656UB is therefore well suited to analog front ends, ADC drivers, photodiode amplifiers, test and measurement systems, and wideband instrumentation.

An operational amplifier is an active analog circuit that amplifies the voltage difference between its inverting and non-inverting inputs. A FET-input operational amplifier uses field-effect transistors at the input, providing high input impedance and low input bias current. Within the broader semiconductor hierarchy, the OPA656UB belongs to the linear-amplifier group, then to operational amplifiers, and finally to the broader power-management and signal-conditioning IC categories. Its wide bandwidth and low-noise input stage make it useful where a high-impedance source must be measured without loading the signal node.

The OPA656UB is unity-gain stable, meaning it can provide closed-loop voltage gain of one while maintaining stable operation across its operating bandwidth. This feature simplifies first-stage design in ADC buffers, active filters, instrumentation, and photodiode circuits because the designer does not have to select a minimum closed-loop gain above the amplifier's unity-gain bandwidth. The 550 MHz bandwidth also provides substantial bandwidth for short signal pulses and high-speed closed-loop gains.

The 8-pin SOIC package is suitable for conventional surface-mount PCB assembly. Because this is a high-speed amplifier, layout quality is as important as the nominal component specifications. Input, feedback, and output paths should be short, with care taken to minimize parasitic capacitance and inductive loops. Decoupling capacitors should be placed close to the supply pins, and the ground return should use a low-impedance plane or carefully controlled routing.

Typical uses include buffering high-speed ADCs, receiving signals from optical detectors, amplifying sensor outputs, driving analog-to-digital converters, and building wideband active filters. In photodiode and transimpedance designs, the FET input stage helps preserve source impedance, but the feedback network and board parasitics determine practical high-frequency performance. The manufacturer should be consulted for the exact input bias current, input capacitance, slew rate, output swing, noise density, and recommended external component values.

When designing around OPA656UB, begin with the manufacturer's pinout and application circuits, then verify stability in the intended gain configuration. Use short, direct feedback traces and avoid routing sensitive input signals beside clock, power-converter, or digital-switching nodes. Decoupling requirements and exposed thermal considerations should be reviewed against the actual supply voltage, output swing, load, and ambient temperature.

This page organizes the OPA656UB technical details, sourcing questions, replacement considerations, and application guidance in a single engineering reference. It also distinguishes the documented device characteristics from design values that must still be checked in the manufacturer datasheet before a new layout or production substitution is released.

直接替换替代料: OPA656UB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: OPA656UB (相同外形与封装尺寸) ——差异在于 Amplifier Type, Gain-Bandwidth Product, Supply Voltage Range, Input Stage, Architecture.

Texas Instruments
Amplifier Type: Voltage Feedback Amplifier
Gain-Bandwidth Product: 500 MHz
Supply Voltage Range: ±5 V to ±6 V
对比 OPA656UB →
Texas Instruments
Amplifier Type: Single voltage-feedback operational amplifier
Gain-Bandwidth Product: 1.6 GHz
Supply Voltage Range: 10 V to 12 V
对比 OPA656UB →

OPA656UB/2K5

✅ 直接替换
📦 8-pin SOIC
Same OPA656 550 MHz FET-input family and 8-pin SOIC footprint; high-grade suffix changes device grade and ordering treatment, with bandwidth unchanged.

📋 参考替代料(不在目录中)

OPA656U/2K5

✅ 直接替换
📦 8-pin SOIC
Same OPA656 550 MHz FET-input family and 8-pin SOIC footprint; the older U/2K5 suffix represents the affected grade and is subject to the manufacturer replacement discussion.

📋 参考替代料(不在目录中)

OPA656UBG4

✅ 直接替换
📦 8-pin SOIC
Same OPA656 550 MHz FET-input architecture and 8-pin SOIC footprint; the G4 suffix denotes a different orderable grade, so grade and qualification must be checked.

📋 参考替代料(不在目录中)

OPA656U

✅ 直接替换
Texas Instruments
📦 8-pin SOIC
Voltage Feedback Amplifier · 1 circuit · 500 MHz · 290 V/µs · Yes · FET input · ±5 V to ±6 V · FET/CMOS voltage-feedback

联系询价

查看数据手册 →

OPA657UB

✅ 直接替换
Texas Instruments
📦 8-pin SOIC
Single voltage-feedback operational amplifier · 1 channel · Low-voltage-noise FET/JFET input · 1.6 GHz · 700 V/µs · 10 V to 12 V · Decompensated voltage-feedback amplifier · 8-pin SOIC

联系询价

查看数据手册 →

OPA814

✅ 直接替换
📦 8-pin SOIC
Same manufacturer and 8-pin SOIC footprint; OPA814 was developed as a drop-in replacement for affected OPA656 variants, with upgraded functionality but changed device characteristics.

📋 参考替代料(不在目录中)

OPA656UB 最大额定值与电气特性

Amplifier Type Voltage-feedback operational amplifier
Input Stage FET input
Gain-Bandwidth Product 550 MHz
Unity-Gain Stability Unity-gain stable
Supply Voltage Range ±6 V
Number of Circuits 1 circuit
封装 8-pin SOIC
安装类型 Surface Mount

OPA656UB 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 NC — Not connected; confirm pin function against the manufacturer pin-description table
引脚 2 IN- — Inverting input
引脚 3 IN+ — Non-inverting input
引脚 4 V- — Negative supply connection
引脚 5 NC — Not connected; confirm pin function against the manufacturer pin-description table
引脚 6 OUT — Output
引脚 7 V+ — Positive supply connection
引脚 8 NC — Not connected; confirm pin function against the manufacturer pin-description table

典型应用

OPA656UB 适用于 6 应用s: High-Speed ADC Input Buffer, Photodiode Transimpedance Amplifier, Wideband Active Filter, Test and Measurement Front End, Optical Receiver Signal Conditioning, High-Speed Analog Sensor Interface.

🔧

High-Speed ADC Input Buffer

OPA656UB fits directly between a high-impedance analog source and a high-speed ADC input. Its 550 MHz gain-bandwidth product provides substantially more bandwidth than many moderate-speed sample-and-hold stages, while unity-gain stability avoids a minimum-gain restriction when the required transfer function is close to unity. The FET input stage helps avoid excessive loading of the source. During design, match the amplifier input capacitance to the ADC sample-and-hold kickback and verify settling against the converter acquisition window. Keep the feedback route short and evaluate the complete input network with an oscilloscope or TDR measurement because package and board parasitics become increasingly important as signal rates rise.

💡

Photodiode Transimpedance Amplifier

OPA656UB is appropriate for optical receivers that need to convert photodiode current into a voltage. The FET-input architecture supports high source impedance, while the 550 MHz gain-bandwidth product permits transimpedance bandwidth beyond the range of many general-purpose precision amplifiers. The usable bandwidth still depends on photodiode capacitance, total input capacitance, transimpedance resistance, feedback capacitor, and board leakage. Begin with the manufacturer application guidance, keep the photodiode input node physically small, and place the feedback network close to the amplifier. Validate settling and ringing across the optical bandwidth rather than relying only on the nominal gain-bandwidth product.

🌐

Wideband Active Filter

OPA656UB can implement high-frequency active filters when the required closed-loop gain and phase margin remain within the amplifier's stability limits. Its unity-gain stability is useful for first filter sections that operate near unity gain, and its 550 MHz bandwidth supports filter cutoffs well above the range of conventional precision op amps. Component selection for R and C networks must include parasitics, because feedback-node capacitance can alter both gain and phase. Keep the filter layout compact and symmetrical where practical, maintain short ground returns, and test the complete filter response with the intended source and load impedances. The amplifier's wide bandwidth also makes board-level coupling and grounding more visible.

🖥️

Test and Measurement Front End

OPA656UB is useful in high-speed instrumentation front ends where the source impedance is high and the measurement must retain signal amplitude and phase accuracy. The 550 MHz bandwidth provides headroom for wideband probe buffers, gain stages, and signal conditioning, while unity-gain stability simplifies direct buffering. Instrument designers should account for probe capacitance, cable loading, input capacitance, and the amplifier's input bias current when estimating low-frequency errors. Keep the input path away from digital clocks and power converters, use a stable low-impedance reference plane, and characterize gain, phase, and settling using the same fixture used in production. The wide bandwidth makes connector and layout discontinuities potential sources of reflection.

📡

Optical Receiver Signal Conditioning

OPA656UB can condition fast signals from optical sensors and photodiodes before digitization. Its high-impedance FET input reduces loading of weak current sources, and the 550 MHz bandwidth supports wideband optical detector outputs. Performance is usually limited by sensor capacitance and leakage rather than the amplifier alone, so the feedback impedance and compensation capacitor should be selected from the desired transimpedance bandwidth and phase margin. Minimize guard-ring area around the sensitive input when leakage matters, maintain clean return paths, and keep the input connector or optical device close to the amplifier. Confirm the amplifier's bias-current and offset behavior against the optical signal amplitude and system temperature range.

🏭

High-Speed Analog Sensor Interface

OPA656UB supports conditioning for sensors that combine high output impedance with wideband dynamic signals. The FET input minimizes input loading, and the 550 MHz gain-bandwidth product avoids unnecessary attenuation of fast sensor transitions. The circuit should use a gain configuration compatible with unity-gain stability, and designers should verify input common-mode range, output swing, slew rate, and settling time against the sensor waveform. Keep the sensor connection and feedback components close to the amplifier to minimize parasitic capacitance and EMI pickup. If the sensor is remote, account for cable capacitance and transmission-line effects rather than treating the input as a lumped-capacitance node. Production validation should include both signal bandwidth and noise measurements.

What are the key specifications of OPA656UB that engineers should know?
The OPA656UB is a single-circuit, wideband, unity-gain stable FET-input operational amplifier with a 550 MHz gain-bandwidth product in an 8-pin SOIC package. According to the Texas Instruments OPA656 data sheet, the device is intended for very wideband voltage-feedback applications. Its unity-gain stability is particularly useful for ADC buffering, photodiode amplification, active filtering, and instrumentation where the required closed-loop gain may be close to one.
What is the gain-bandwidth product of OPA656UB?
The OPA656UB has a gain-bandwidth product of 550 MHz. This is the documented gain-bandwidth figure in the Texas Instruments OPA656 data sheet title and product description. Because the amplifier is unity-gain stable, it can be used at a closed-loop gain of one, while the same device can also be used at higher closed-loop gains when the resulting bandwidth and stability requirements are acceptable.
Is OPA656UB suitable for ADC input buffering?
Yes, OPA656UB is suitable for ADC input buffering because it combines a wideband 550 MHz gain-bandwidth product with unity-gain stability. Its FET-input architecture supports high-impedance signal sources. The Texas Instruments product page identifies the OPA656 as a wideband, unity-gain stable FET-input operational amplifier, making it appropriate for high-speed ADC front ends where bandwidth, input capacitance, settling behavior, and drive capability are carefully matched to the converter.
Where can I download the OPA656UB datasheet PDF?
The official OPA656 datasheet is available through the Texas Instruments product literature link at https://www.ti.com/lit/gpn/OPA656, while the package-specific ordering information appears at https://www.ti.com/product/OPA656/part-details/OPA656UB. Use the manufacturer PDF for the authoritative pinout, electrical characteristics, recommended operating conditions, application circuits, and package drawings. The OPA656UB is specified in an 8-pin SOIC package.
Where can I find the OPA656UB pinout?
The OPA656UB pinout is found in the Texas Instruments OPA656 data sheet and the OPA656UB part-details page. OPA656UB is an 8-pin SOIC device, with pin 1 identified by the package orientation mark. Use the pin-description table in the manufacturer data sheet when assigning supply, input, output, and feedback connections, and preserve the package footprint and pin numbering when planning a replacement.
Where can I buy OPA656UB online?
The OPA656UB can be requested through the Request a Quote form on this product page. The form is the appropriate route for current unit availability, volume pricing, packaging, and lead-time confirmation because commercial conditions can change rapidly. The verified OPA656UB listing confirms that the exact part is a single-circuit, 8-pin SOIC voltage-feedback amplifier from Texas Instruments.
What is the price of OPA656UB?
Use the Request a Quote form on this page for the current OPA656UB price and volume terms. Pricing depends on order quantity, package quantity, and current component availability, so a static figure can become stale. The request form also allows the quantity, target date, and any required production documentation to be included in the same quotation.
What is the lead time for OPA656UB?
Request the current OPA656UB lead time through the Request a Quote form on this page. The exact schedule depends on available inventory, order quantity, and the requested delivery date. Submit the required quantity and target date with the request so procurement can confirm a current schedule rather than relying on an outdated generic lead-time estimate.
Is OPA656UB in stock?
Current OPA656UB stock should be confirmed through the Request a Quote form on this page. The form captures the requested quantity and delivery date, allowing the supplier to check the exact Texas Instruments MPN and its 8-pin SOIC configuration against current inventory. Avoid treating the existence of a distributor listing as a guarantee of present stock.
What can replace OPA656UB?
The closest documented replacement candidates include OPA656UB/2K5, OPA656U/2K5, OPA656UBG4, and OPA657UB, but each requires a package, grade, and electrical review before substitution. Texas Instruments identifies OPA656UB/2K5 as a high-grade version, while its support material states that OPA814 was developed as a drop-in replacement for affected OPA656 variants. Confirm the exact suffix, SOIC footprint, supply range, bandwidth, and stability in the relevant data sheet.
Can OPA656UB/2K5 replace OPA656UB?
OPA656UB/2K5 is a candidate replacement for OPA656UB because it is identified in Texas Instruments support material as the recommended high-grade version for an affected OPA656U/2K5 population. However, replacement approval should still verify the exact SOIC pinout, grade, operating limits, and test criteria. The two suffixes are not interchangeable merely because both belong to the OPA656 family.
OPA656UB vs OPA657UB - which is better for a high-speed analog application?
OPA656UB is the better baseline choice when the design specifically requires a unity-gain stable, 550 MHz FET-input amplifier in an 8-pin SOIC package. OPA657UB may suit designs where its different precision and noise characteristics are preferred. According to Texas Instruments support material, OPA814 was developed as a drop-in replacement for affected OPA656 devices; otherwise, compare input bias current, input voltage noise, slew rate, output swing, and settling behavior directly.
What is the difference between OPA656UB and OPA656UBG4?
OPA656UB and OPA656UBG4 are closely related OPA656-family orderable parts, but the suffix can denote a different grade or qualification status rather than a change in the basic amplifier function. Both are identified with the 8-pin SOIC family and the same wideband, unity-gain stable FET-input architecture. Use the manufacturer ordering information and data sheets to confirm the exact temperature range, grade, marking, qualification, and lifecycle status before treating one as a drop-in substitute.
When should I choose OPA656UB over OPA814?
Choose OPA656UB when the design specifically requires the OPA656 performance profile and its 8-pin SOIC implementation. Choose OPA814 when its newer functionality and compatibility are advantageous and the existing circuit has been revalidated. Texas Instruments states that OPA814 was developed as a drop-in replacement for affected OPA656 variants, but engineers should still verify supply voltage, bandwidth, noise, offset, slew rate, output swing, and stability in the finished design.
Is OPA656UB suitable for photodiode and optical signal conditioning?
Yes, OPA656UB is suitable for photodiode and optical signal conditioning because its FET-input stage supports high-impedance sources and its 550 MHz bandwidth handles fast signals. Texas Instruments describes the OPA656 as a precision, high-speed amplifier intended for transimpedance and analog-to-digital converter buffering applications. Practical performance still depends on photodiode capacitance, feedback resistance, feedback capacitance, board leakage, and the selected target bandwidth.
How should OPA656UB be laid out on a high-speed PCB?
Place OPA656UB power-decoupling capacitors close to the supply pins and keep the input, feedback, and output routes short and direct. Avoid routing the sensitive input node beneath or beside high-current switching paths, and use a continuous ground reference where practical. Because the device supports 550 MHz bandwidth, parasitic capacitance and inductance can materially alter rise time, ringing, and stability even when the schematic is correct.

工程参考数据: OPA656UB ——对比、设计指导和合规信息。

选型指南

Choose OPA656UB when the circuit needs a high-impedance, wideband signal path and the design specifically benefits from a documented 550 MHz gain-bandwidth product with unity-gain stability. It is especially appropriate for ADC buffering, photodiode amplification, wideband filters, and instrumentation. Select OPA656UB/2K5 when the manufacturer identifies the high-grade OPA656 version as the preferred production choice, and review OPA656U/2K5 when assessing legacy inventory affected by the grade change. OPA656UBG4 may be relevant for a specific G4 sourcing or qualification requirement, but its suffix-specific operating conditions must be confirmed. Consider OPA657UB when its precision characteristics offer a better circuit fit, and evaluate OPA814 when upgraded functionality or the manufacturer-described replacement path is useful. For every alternate, verify the 8-pin SOIC footprint, supply range, noise, offset, slew rate, output swing, stability, temperature grade, and qualification before release.

与替代料对比

参数 本产品 OPA656UB/2K5 OPA656U/2K5 OPA656UBG4 OPA814
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Type Voltage-feedback operational amplifier Voltage-feedback operational amplifier Voltage-feedback operational amplifier Voltage-feedback operational amplifier High-speed operational amplifier
Device Grade OPA656UB grade High-grade OPA656 version Original U/2K5 grade G4 orderable grade Replacement device with upgraded functionality
Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

关键差异点

  • Provides confirmed 550 MHz unity-gain-stable operation (对比 OPA814)
  • Offers a higher-grade OPA656 replacement path (对比 OPA656U/2K5)
  • Matches the established OPA656 family architecture (对比 OPA657UB)

设计说明

Keep the OPA656UB input, feedback, and output paths short and direct. Place power-decoupling capacitors adjacent to the supply pins, preserve a low-impedance ground reference, and avoid routing the sensitive input beneath or beside high-current switching nodes. At 550 MHz gain-bandwidth, package inductance, trace capacitance, and ground-return discontinuities can produce ringing or degraded settling even when the schematic simulation is acceptable.

Evaluate the complete input network rather than only the amplifier gain. For ADC and photodiode circuits, include source capacitance, connector capacitance, feedback capacitance, and package parasitics when estimating bandwidth and stability. Add series damping only after measurement where ringing is observed, because an inappropriate damping network can reduce bandwidth and alter input impedance. Use the manufacturer application circuits as the starting point for feedback and compensation values.

Do not assume that every OPA656 suffix is an unrestricted substitute for OPA656UB. OPA656UB/2K5 is described as a high-grade version, while OPA656U/2K5 is the affected older grade discussed in TI support material. Before releasing a substitute, compare the exact ordering code, 8-pin SOIC footprint, supply range, input bias current, offset, noise, bandwidth, slew rate, output swing, temperature range, qualification, and lifecycle status.

Use separate high-frequency and local bulk decoupling close to the amplifier, following the manufacturer recommendations for capacitance and voltage rating. Verify ripple at the supply pins because high-bandwidth feedback can amplify supply impedance and convert supply noise into output modulation. Check source and sink current against the required output swing and load, and use a low-impedance supply return to keep ground bounce out of the signal path.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product and distributor information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for OPA656UB. AEC-Q100 is marked not applicable because the verified material does not identify OPA656UB as an automotive-qualified variant.

相关搜索

OPA656UB datasheet OPA656UB pinout OPA656UB datasheet pdf OPA656UB equivalent OPA656UB replacement OPA656UB cross reference OPA656UB vs OPA814 Texas Instruments OPA656UB OPA656UB 550 MHz OPA656UB SOIC-8 OPA656UB ADC driver OPA656UB photodiode amplifier OPA656UB price OPA656UB stock OPA656UB application circuit

相关元器件 & 术语

Texas Instruments OPA656UB OPA656UB/2K5 OPA656U/2K5 OPA656UBG4 OPA656U OPA657UB OPA814 OPA656 Operational amplifier Voltage-feedback amplifier FET-input amplifier Unity-gain stable Gain-bandwidth product Transimpedance amplifier ADC buffer Photodiode High-speed signal conditioning Active filter Test and measurement 550 MHz ±6 V 8-pin SOIC SOIC family Surface mount Input bias current Input voltage noise Slew rate Common-mode rejection ratio
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情