Texas Instruments

OPA683ID - 1.44GHz Current-Feedback Amplifier | Texas Instruments

MPN: OPA683ID ✓ فعال
8-pin SOIC (D), 3.90 mm body width Package
MOQ: 1 |

OPA683ID جائزہ

Texas Instruments OPA683ID is a very-low-power, current-feedback operational amplifier with a disable function, providing a 1.44 GHz gain-bandwidth characteristic in an 8-pin SOIC package. The device is intended for wideband signal paths where high operating bandwidth, low power consumption, and controlled shutdown are important. It operates across the stated -40°C to +85°C temperature range.

A current-feedback operational amplifier is a voltage-feedback amplifier subclass that uses feedback-network current, rather than differential input voltage alone, to establish closed-loop gain. Current-feedback amplifiers sit within the broader operational-amplifier and analog-signal-processing hierarchies. Their high bandwidth and slew capability make them useful in video, communications, instrumentation, and data-conversion interfaces where a conventional general-purpose amplifier may not provide sufficient operating speed.

The OPA683ID combines its 1.44 GHz bandwidth with a low-power design and a dedicated disable function. The disable control allows the amplifier to enter a low-power state when the associated signal path is not required, which can help reduce system power consumption. Its single-amplifier configuration simplifies designs that need one high-speed analog channel rather than a multi-amplifier package. The 8-pin SOIC (D) package also supports conventional surface-mount PCB assembly.

Unlike a general-purpose voltage-feedback amplifier optimized around nearly constant gain-bandwidth behavior, the OPA683ID uses current-feedback architecture. The exact closed-loop gain, output amplitude, output impedance, load, and feedback-resistor selection must therefore be evaluated together rather than treated as an independent gain-bandwidth calculation. The manufacturer datasheet remains the controlling document for these relationships and for the minimum recommended feedback resistance.

Typical uses include video-signal conditioning, communications infrastructure, high-speed instrumentation, test and measurement equipment, and interface circuitry associated with high-speed converters. The amplifier can also be used where its disable function supports controlled power management in intermittently active signal chains. External signal conditioning may still be required when source impedance, cable capacitance, or output loading exceed the recommended operating conditions.

PCB implementation requires a low-inductance ground reference, short feedback traces, and careful separation between input and output paths. Place the feedback components close to the device, terminate unused inputs and outputs appropriately, and confirm stability with the actual source and load impedances. Decoupling capacitors should be positioned directly beside the supply pins according to the manufacturer layout guidance.

This page combines package, bandwidth, temperature, lifecycle, sourcing, replacement, and design considerations into a compact engineering reference. It also distinguishes verified drop-in alternatives from parts that are merely similar amplifiers, helping designers preserve package compatibility, pin behavior, and the intended current-feedback performance before approving a substitution.

کے لیے ڈراپ اِن متبادل OPA683ID — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

OPA687ID

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-pin SOIC (D)
Gain-bandwidth product is approximately 1.5 GHz versus 1.44 GHz, a difference of approximately 4.2%; disable and electrical limits still require final verification.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

OPA683ID زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 1.44 GHz
Disable Function Yes
آپریٹنگ درجہ حرارت رینج -40°C to +85°C
پیکیج 8-pin SOIC (D), 3.90 mm body width
ماؤنٹنگ ٹائپ Surface mount
RoHS اسٹیٹس unknown
REACH Status unknown
AEC-Q100 Qualification unknown

OPA683ID 8-pin soic (d), 3.90 mm body width پن کنفیگریشن گائیڈ

OPA683ID (8-pin soic (d), 3.90 mm body width پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

OPA683ID کے لیے 8-pin soic (d), 3.90 mm body width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں OPA683ID.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

OPA683ID کے لیے موزوں ہے 6 ایپلیکیشنs: Wideband Video Signal Conditioning, Communications Interface Amplification, High-Speed Instrumentation Signal Paths, Test and Measurement Equipment, Data Converter Interface, Portable Battery-Powered Analog Equipment.

📺

Wideband Video Signal Conditioning

The OPA683ID fits video-conditioning paths that require a 1.44 GHz current-feedback amplifier in an 8-pin SOIC package. It can amplify or level-shift video signals when the selected feedback network supports the intended closed-loop gain and the source and load impedances remain compatible with the manufacturer's stability guidance. The disable function provides a practical way to reduce power demand when a video channel is inactive. Keep the feedback resistor close to the amplifier, use a low-inductance ground plane, and maintain short traces to minimize added distortion and instability.

🌐

Communications Interface Amplification

OPA683ID is suitable for communications interface amplification where a 1.44 GHz bandwidth and current-feedback architecture are needed to process moderate-frequency signals through short PCB paths. Its very-low-power design is useful in portable or intermittently active communication equipment, while the disable function allows the amplifier to be shut down when the associated RF or baseband path is inactive. The exact signal amplitude and impedance environment must be checked against the datasheet, particularly for cable loading, source impedance, output drive, and stable feedback resistance.

🔧

High-Speed Instrumentation Signal Paths

The OPA683ID can serve as a wideband instrumentation amplifier stage when the measurement bandwidth requires the device's 1.44 GHz gain-bandwidth product. It is especially relevant where low power and a shutdown function are useful for portable test equipment. Front-end attenuation, gain, input protection, and sensor drive requirements must be designed around the amplifier's input range, output swing, and current capability. Use short, shielded signal routes where appropriate and validate stability with the complete sensor, cable, and termination network rather than an ideal source model.

🔧

Test and Measurement Equipment

OPA683ID is appropriate for compact test and measurement equipment that needs a fast, low-power signal-conditioning channel. Its 1.44 GHz bandwidth can accommodate high-bandwidth probes and transient signals, while the disable function can reduce consumption when a test channel is idle. A practical implementation should include controlled input termination, short feedback paths, and local supply bypassing to preserve measurement integrity. Confirm the required output amplitude, load, source impedance, and gain against the manufacturer data before defining the surrounding attenuator and driver circuitry.

🖥️

Data Converter Interface

The OPA683ID can be used in interface paths around high-speed data converters when the converter requires an amplifier with wide bandwidth and low power. Its 1.44 GHz gain-bandwidth product provides bandwidth for edge-rate requirements, while its current-feedback architecture can be advantageous with the correct feedback impedance. The amplifier should be placed close to the converter or isolation resistor, and its inputs and outputs should be routed away from noisy digital and clock paths. Use the manufacturer's recommended decoupling and feedback arrangements to avoid converter-edge ringing.

📱

Portable Battery-Powered Analog Equipment

OPA683ID is suitable for portable battery-powered analog equipment because Texas Instruments describes it as a very-low-power current-feedback amplifier and includes an active disable function. The 1.44 GHz bandwidth supports wideband processing without requiring a larger high-speed amplifier package, while shutdown can reduce demand when the instrument is between measurements. Power architecture should account for the exact quiescent current, active current, and disable leakage from the manufacturer data. The complete signal path must also remain stable over the battery-voltage range and across source and load variations.

تجویز کردہ پروڈکٹس کا خلاصہ

OPA683ID Texas Instruments استعمال ہوتا ہے: Wideband Video Signal Conditioning, Communications Interface Amplification, High-Speed Instrumentation Signal Paths, Test and Measurement Equipment, Data Converter Interface, Portable Battery-Powered Analog Equipment OPA683IDR Order-code variant in the same 8-SOIC amplifier family استعمال ہوتا ہے: Wideband Video Signal Conditioning, High-Speed Instrumentation Signal Paths OPA683U Same OPA683 family order-code variant استعمال ہوتا ہے: Communications Interface Amplification, Portable Battery-Powered Analog Equipment OPA687ID Same-family higher-bandwidth upgrade candidate استعمال ہوتا ہے: Test and Measurement Equipment, Data Converter Interface
What is the operating voltage range of OPA683ID?
The OPA683ID operating-voltage range must be taken from the manufacturer's electrical-characteristics table before the device is connected to a supply. According to the Texas Instruments OPA683 datasheet, the device is a very-low-power current-feedback amplifier with disable, but the accessible product information does not state the minimum and maximum supply voltages. Verify both the normal operating range and the maximum voltage between any pins against the manufacturer data before designing the power rail.
What is the gain-bandwidth product of OPA683ID?
The OPA683ID has a gain-bandwidth product of 1.44 GHz, as stated in the Texas Instruments product listing and the OPA683ID distributor specification. This bandwidth makes it suitable for wideband signal-conditioning paths. Because the OPA683ID is a current-feedback amplifier, its bandwidth and stability must be evaluated with the actual feedback resistor, source impedance, load, and target closed-loop gain rather than through a voltage-feedback-style gain calculation alone.
Where can I download the OPA683ID datasheet PDF?
The official OPA683ID datasheet is available from Texas Instruments through the manufacturer's OPA683 product page at https://www.ti.com/product/OPA683 and the manufacturer datasheet link at https://www.ti.com/lit/gpn/OPA683. Use the manufacturer copy for the authoritative pin description, supply limits, recommended operating conditions, disable behavior, feedback guidance, package drawing, and electrical characteristics before releasing a PCB or production design.
Where can I find the OPA683ID pinout?
The OPA683ID uses an 8-pin SOIC package, and its complete pin assignment should be taken from the pin-configuration table in the Texas Instruments OPA683 datasheet. The verified product information confirms eight pins but does not reproduce the individual terminal names. Use the manufacturer pin table and package drawing when assigning supply, input, output, disable, and ground connections; do not infer the disable polarity or pin number from a generic SOIC layout.
What is the best drop-in replacement for OPA683ID?
The closest identified same-family drop-in candidate is OPA687ID, which uses the same 8-pin SOIC family and is very close to the OPA683ID's 1.44 GHz bandwidth. Its expected bandwidth advantage is approximately 4.2%, calculated from 1.5 GHz versus 1.44 GHz, making it the strongest candidate when its disable behavior and other electrical limits satisfy the system requirements. No verified cross-brand drop-in replacement was established, so production substitution still requires a complete datasheet comparison.
Can OPA687ID replace OPA683ID?
OPA687ID is a candidate for replacing OPA683ID because both belong to the same Texas Instruments current-feedback amplifier family and use an 8-pin SOIC package. Its approximately 1.5 GHz bandwidth is within about 4.2% of the OPA683ID's 1.44 GHz value. Before treating it as a production drop-in, verify disable polarity, supply limits, output swing, recommended feedback resistance, input bias current, and stability with the intended source and load.
OPA683ID vs OPA687ID: which is better for a high-speed analog path?
OPA683ID is preferable when its 1.44 GHz bandwidth and lower-power operating approach are the established requirements, while OPA687ID is preferable when the modestly higher approximately 1.5 GHz bandwidth provides useful headroom. Both use an 8-pin SOIC package, so the choice should not be based on outline compatibility alone. Compare disable behavior, quiescent current, output swing, noise, distortion, and stability with the actual feedback network before selecting either device.
When should I choose OPA683ID instead of OPA687ID?
Choose OPA683ID when the design has been characterized around the manufacturer's 1.44 GHz bandwidth rating and the lower-power current-feedback implementation is part of the system specification. OPA687ID becomes attractive when additional closed-loop bandwidth headroom is valuable. Because OPA687ID may differ in power, output-drive, and stability characteristics, choose the replacement only after checking every parameter that affects the target gain, source impedance, output load, and disable sequence.
Is OPA683ID suitable for video and communications signal paths?
The OPA683ID is suitable for many wideband video and communications signal paths because it combines a 1.44 GHz gain-bandwidth product with a current-feedback architecture and a disable function. The disable input can reduce power demand when a channel is inactive. For high-speed routing, the amplifier still requires short PCB traces, controlled impedance, suitable source and load impedances, and a feedback network selected from the manufacturer's guidance.
How much power does OPA683ID consume?
The OPA683ID is specifically described by Texas Instruments as a very-low-power current-feedback amplifier, but its exact supply current depends on the operating voltage, output state, output current, and disable condition. The verified listing does not provide a numerical quiescent-current value. Use the manufacturer's electrical-characteristics table to calculate worst-case supply power with Pd approximately equal to supply voltage multiplied by total supply current under the operating conditions of interest.
What does the disable function on OPA683ID do?
The OPA683ID includes a disable function intended to place the amplifier into a low-power state when its signal path is not required. This can reduce power consumption in intermittently active channels and supports controlled system power management. The manufacturer datasheet defines the logic threshold, active polarity, turn-on timing, and output state during disable; those details should be used to prevent unintended output transients or sequencing conflicts.
Where can I buy OPA683ID and what is its price?
Use the Request a Quote form on this page to request the current OPA683ID price, stock status, and lead time. The product page also links the manufacturer's OPA683 ordering information. Pricing and inventory can vary with order quantity and market conditions, so a current quote is preferable to a historical unit-price figure. Specify the exact OPA683ID order code and required quantity when submitting the request.
Is OPA683ID currently in stock?
The current stock position should be confirmed through the Request a Quote form on this page because availability is quantity-dependent and can change after the last catalog update. The verified product listings identify OPA683ID as an orderable Texas Instruments current-feedback amplifier in an 8-SOIC package. Include your required quantity, date code preference, and delivery target in the request so the supply team can return an actionable availability response.
What is the lead time for OPA683ID?
The current lead time for OPA683ID should be requested through the Request a Quote form on this page. The available manufacturer and distributor listings identify the component, but they do not establish a stable lead-time commitment that can be published with this page. Provide the required quantity and target delivery date when requesting a quote, especially for production builds where allocation or packaging requirements may affect scheduling.
What are the key specifications of OPA683ID that engineers should know?
The key confirmed OPA683ID specifications are its 1.44 GHz gain-bandwidth product, single-amplifier configuration, current-feedback architecture, integrated disable function, 8-pin SOIC package, and -40°C to +85°C operating-temperature range. Texas Instruments also classifies it as a very-low-power wideband amplifier. Supply voltage, quiescent current, slew rate, noise, distortion, input-offset voltage, and output swing should be read from the manufacturer's electrical-characteristics table before final circuit sizing.
What is the best Texas Instruments equivalent for OPA683ID?
OPA687ID is the best identified Texas Instruments candidate because it is from the same current-feedback amplifier family, uses an 8-pin SOIC package, and offers approximately 1.5 GHz bandwidth compared with the OPA683ID's 1.44 GHz. The difference is approximately 4.2%. That close bandwidth match supports drop-in consideration, but disable polarity, power, output swing, feedback resistance, and stability must still be confirmed against the manufacturer data for the intended design.

کے لیے انجینئرنگ ریفرنس ڈیٹا OPA683ID — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose OPA683ID when the design specifically requires the confirmed 1.44 GHz current-feedback amplifier characteristics, very-low-power positioning, an 8-pin SOIC footprint, and an integrated disable function. It is appropriate for video, communications, instrumentation, test equipment, converter-interface, and portable applications where the complete feedback and loading network has been validated. Choose OPA687ID when approximately 4.2% more nominal bandwidth would provide useful margin and its remaining electrical characteristics satisfy the design. No verified cross-brand drop-in alternative was established, so engineers should not substitute a generic high-speed operational amplifier solely by matching bandwidth and package outline. Always compare supply limits, quiescent current, output swing, noise, distortion, recommended feedback resistance, disable polarity, and stability.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ OPA687ID
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D)
Amplifier Architecture Current-feedback Current-feedback
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 1.44 GHz Approximately 1.5 GHz
Disable Function Yes Yes
Special Features Very-low-power wideband amplifier with disable Wideband current-feedback amplifier with disable

اہم امتیازی خصوصیات

  • Closely matched same-family bandwidth (بمقابلہOPA687ID)
  • Integrated power-state control (بمقابلہOPA687ID)
  • Purpose-built very-low-power wideband positioning (بمقابلہOPA687ID)

ڈیزائن نوٹس

Place the feedback resistor and its return path directly beside the OPA683ID pins, and keep the input and output routing short. Use a continuous ground plane with no split beneath the device, and place supply-bypass capacitors at the closest available supply and ground pins. High-speed current-feedback amplifiers can amplify trace inductance, parasitic capacitance, and impedance discontinuities, so the physical layout should be treated as part of the feedback network.

Validate stability with the actual source impedance, transmission-line loading, output load, and selected feedback resistor rather than assuming ideal sources. Current-feedback amplifiers do not follow voltage-feedback bandwidth rules, and changing source impedance can alter frequency response. If ringing appears, verify grounding, component placement, feedback-loop length, output isolation, and termination before increasing the feedback resistance.

Do not infer disable polarity or inactive output behavior from the product description. Read the logic thresholds and timing information in the manufacturer data, and ensure external circuitry cannot back-drive the disabled output. Also check maximum input and output voltages under every operating state. The -40°C to +85°C rating identifies the operating temperature range, but it does not by itself guarantee performance across every combination of supply, load, and source impedance.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified manufacturer and distributor information does not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact orderable MPN and current manufacturing status.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

OPA683ID datasheet OPA683ID pinout OPA683ID datasheet pdf OPA683ID 1.44GHz amplifier OPA683ID SOIC-8 pinout Texas Instruments OPA683ID OPA683ID current feedback amplifier OPA683ID video signal conditioning OPA683ID disable function OPA683ID replacement OPA683ID vs OPA687ID OPA683ID price OPA683ID stock OPA683ID application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments OPA683ID OPA687ID OPA683IDR OPA683U Operational Amplifier Current-Feedback Amplifier Voltage-Feedback Amplifier Analog Signal Processing Gain-Bandwidth Product 1.44 GHz Disable Function Very-Low-Power Amplifier 8-pin SOIC SOIC Family Surface-Mount Package SMD Feedback Resistor Common-Mode Input Range Quiescent Current Video Signal Conditioning Communications Interface Instrumentation Amplifier Data Converter Interface RoHS REACH AEC-Q100
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں