P1010NSE5KHA - QorIQ P1 PowerPC SoC, 1.0GHz, 425-TEPBGA | NXP
料号： P1010NSE5KHA ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $78.4 | $78.40 |
| 10 | $74.2 | $742.00 |
| 100 | $67.5 | $6,750.00 |
| 500 | $60.1 | $30,050.00 |
| 1,000 | $54.25 | $54,250.00 |
P1010NSE5KHA 概述
A QorIQ SoC (System-on-Chip) is a multicore communications microprocessor that consolidates CPU cores, networking peripherals, security engines, and memory controllers into one device. The QorIQ P1 family sits between NXP's lower-end PowerQUICC devices and the higher-tier P2/P4 families; it is classified as a microprocessor IC for embedded computing and belongs to the broader MPU > embedded processor > communications processor > SoC taxonomy.
Key features include a single e500v2 core up to 1.0 GHz, integrated SEC 4.x hardware cryptography, hardware-accelerated Trusted Boot, two 10/100/1000 Mb/s Ethernet MACs, two USB 2.0 controllers (host + device), two SATA 2.0 ports, two PCIe Gen1 controllers, and a DDR3 SDRAM controller with ECC. The 425-TEPBGA package exposes the full address/data bus and SerDes lanes required for industrial gateways.
Architecturally, the P1010NSE5KHA uses NXP's e500v2 superscalar core paired with a three-level cache hierarchy and a coherent system bus to the on-chip peripherals. Hardware virtualization is not present on this device, but the SEC engine offloads AES, 3DES, SHA, and public-key acceleration, reducing CPU load for IPsec/TLS workloads.
Typical applications include industrial HMI panels, secure edge gateways, networked printers, embedded Linux routers, building automation controllers, and power-converter control with Ethernet connectivity. The wide I/O set reduces the companion chip count versus smaller Cortex-A parts.
When designing with this device, allocate proper thermal relief for the 425-ball BGA and follow NXP's layout guide for DDR3 length matching. The 0 to 105 °C operating range covers industrial enclosures but not full automotive AEC-Q100 Grade 2.
This page synthesizes distributor pricing, drop-in NXP-family alternatives, and practical design notes that supplement the manufacturer datasheet and speed up your component selection.
直接替换替代料： P1010NSE5KHA ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1010NSE5KHA （相同外形与封装尺寸） ——差异在于 Memory Controller, Operating Temperature, Package, Core Architecture, Ethernet.
快速对比工具——选择替代料号进行并排对比：
P1010NSN5KHA
✅ 直接替换📋 参考替代料（不在目录中）
P1020NSE5HHA
✅ 直接替换📋 参考替代料（不在目录中）
P1014NSE5KHA
✅ 直接替换📋 参考替代料（不在目录中）
P1020NSN5HHA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P1010NSE5KHB
✅ 直接替换📋 参考替代料（不在目录中）
P1010NSE5KHA 最大额定值与电气特性
| Family | QorIQ P1 |
| Core Architecture | PowerPC e500v2, 32-bit |
| Number of Cores | 1 |
| Maximum Core Frequency | 1.0 GHz |
| Memory Controller | DDR3 with ECC |
| Ethernet | 2 x 10/100/1000 Mb/s (RGMII) |
| USB | 2 x USB 2.0 (Host + Device) |
| SATA | 2 x SATA 2.0 |
| PCIe | 2 x PCIe Gen1 |
| Security Engine | SEC (AES/3DES/SHA/RSA) |
| Trusted Boot | Hardware-accelerated |
| 电源电压 | 1.0 V core |
| 工作温度 | 0 °C to +105 °C |
| 封装 | 425-TEPBGA, 19x19 mm |
| 安装类型 | Surface Mount |
| MSL 等级 | 3 (per JEDEC J-STD-020) |
| RoHS 状态 | Compliant |
| Part Status | Active |
P1010NSE5KHA 425-tepbga, 19x19 mm 引脚配置指南
P1010NSE5KHA（425-tepbga, 19x19 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1010NSE5KHA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1010NSE5KHA 适用于 7 应用s: Industrial Secure Edge Gateway, Networked Printers and MFPs, Industrial HMI Panels, Building Automation Controllers, Power Conversion Controllers with Ethernet, Embedded Linux Router and Firewall, Smart Grid RTU and IEC 61850 IEDs.
Industrial Secure Edge Gateway
The P1010NSE5KHA's hardware SEC engine, dual GbE, and 1.0 GHz e500v2 core make it well matched to IPsec VPN gateways that aggregate fieldbus data from Modbus/TCP and EtherCAT nodes. With hardware-accelerated AES and SHA offload, line-rate VPN throughput does not compromise routing CPU cycles. Compared with Cortex-A8 gateways, the MPU offers native DDR3 with ECC for high-altitude or industrial EMI robustness, and TEPBGA thermal headroom supports fanless sealed enclosures.
推荐
Networked Printers and MFPs
Networked printers and multifunction devices use the P1010NSE5KHA as an embedded controller for image pipeline processing, RIP, and dual GbE connectivity. The 1.0 GHz core handles PDL rasterization while the dual SATA ports attach to local storage for spooling; USB 2.0 hosts connect to scanner front ends. The TEPBGA package's 19x19 mm footprint fits inside compact printer mainboards and its industrial 0-105 °C rating survives elevated chassis temperatures.
推荐
Industrial HMI Panels
Human-Machine Interface panels using capacitive touchscreens drive LVDS displays from the P1010NSE5KHA's PCIe lanes and DDR3 framebuffer. The e500v2's deterministic interrupt latency simplifies real-time Qt/Embedded GUI scheduling at 60 Hz refresh. Hardware Trusted Boot authenticates firmware on every boot, meeting IEC 62443 industrial-cyber-security requirements for control room HMIs.
推荐
Building Automation Controllers
BACnet/IP and KNXnet/IP gateways benefit from the P1010NSE5KHA's two GbE MACs and dual PCIe for sub-network bridges to DALI, Modbus, and LonWorks trunks. The SEC engine secures BACnet/IP packets while the 1.0 GHz core handles trend logging and analytic rules. Industrial temperature grade 0 to 105 °C ensures continuous duty in mechanical-room cabinets.
推荐
Power Conversion Controllers with Ethernet
Smart inverters and UPS controllers attach to the P1010NSE5KHA via the dual PCIe links for ADC and DSP peripherals while GbE uplinks report to SCADA. Hardware crypto on the SEC engine secures grid-protocol packets (IEEE 2030.5, OpenADR) and supports signed firmware updates required by IEC 61850 utility deployments.
推荐
Embedded Linux Router and Firewall
Mainstream Linux routers running iproute2, nftables, and StrongSwan benefit from the P1010NSE5KHA at the heart of small business firewalls. Its SEC engine executes AES-256-GCM at tens of hundreds of Mbps IPsec throughput, and the DDR3 controller with ECC delivers reliable memory for long-uptime deployments. Dual GbE plus optional link aggregation enable WAN/USB-LTE failover firmware on a single SoC.
推荐
Smart Grid RTU and IEC 61850 IEDs
Substation Remote Terminal Units use the P1010NSE5KHA to implement IEC 61850 GOOSE messaging, SV sampling, and DNP3 over Ethernet. Trusted Boot and SEC crypto authenticate substation configuration and meet IEC 62351 cyber-security requirements. Dual GbE allow PRP/HSR network redundancy, while the 105 °C ambient operating envelope handles the high-temperature demands of metal-clad switchgear enclosures.
推荐
推荐产品汇总
工程参考数据： P1010NSE5KHA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1010NSN5KHA | P1020NSE5HHA | P1014NSE5KHA | P1020NSN5HHA | P1010NSE5KHB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA (19x19) | 425-TEPBGA (19x19) - same | 425-TEPBGA (19x19) - same | 425-TEPBGA (19x19) - same | 425-TEPBGA (19x19) - same | 425-TEPBGA (19x19) - same |
| Number of Cores | 1 | 1 | 2 | 1 | 2 | 1 |
| Core Frequency | 1.0 GHz | 800 MHz (-20%) | 800 MHz (-20%) | 1.0 GHz | 800 MHz (-20%) | 1.0 GHz |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Memory Controller | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC |
| Ethernet | 2 x GbE (RGMII) | 2 x GbE | 2 x GbE | 2 x GbE | 2 x GbE | 2 x GbE |
| USB | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 |
| SATA | 2 x SATA 2.0 | 2 x SATA 2.0 | 2 x SATA 2.0 | 2 x SATA 2.0 | 2 x SATA 2.0 | 2 x SATA 2.0 |
| PCIe | 2 x PCIe Gen1 | 2 x PCIe Gen1 | 2 x PCIe Gen1 | 2 x PCIe Gen1 | 2 x PCIe Gen1 | 2 x PCIe Gen1 |
| Security Engine (SEC) | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | 0 °C to +105 °C | 0 °C to +105 °C | 0 °C to +105 °C | 0 °C to +105 °C | 0 °C to +105 °C | 0 °C to +105 °C |
关键差异点
- Highest clock grade in the single-core QorIQ P1 family （对比 P1010NSN5KHA)
- Single core simplifies deterministic scheduling vs dual-core variant （对比 P1020NSE5HHA)
- P1010 vs P1014A: higher speed grade available （对比 P1014NSE5KHA)
设计说明
Estimated: The 425-TEPBGA exposes a thermal pad on the bottom; it must be soldered to the PCB land and connected via thermal vias to a copper pour or external heatsink. With a sealed enclosure design, assume theta_JA around 13 to 18 C/W, derate core voltage above 105 °C junction, and use 8-layer PCB stack-up so that inner copper planes spread heat from the die to the edge of the 19x19 mm BGA footprint. Source a thermal model from the QorIQ P1010 hardware design guide before locking enclosure mechanics.
DDR3 length-matching on the address/command/control lanes must follow the QorIQ P1010 design guidelines: keep the address and command tracks within ±25 mil matched length, and route byte lanes within each 8-bit group with ±10 mil matching. Use 100 ohm differential SERDES routing for SATA and PCIe, with AC-coupled capacitors placed near the SoC balls. Decouple the 1 V core with 100 nF X7R + 10 uF bulk ceramic + 330 uF polymer within the smallest loop area possible.
Do not enable the core PLL above 1.0 GHz on P1010NSE5KHA silicon - confusing letter codes (KHA vs KHB vs KHC) reference speed grades, and the KHA is the 1000 MHz version. PCIe Gen1 at 2.5 Gbps has aggressive SERDES signal-integrity requirements: reference-plane continuity under the BGA, ground stitching vias every λ/20, and never route the differential pair over plane splits. The TEPBGA lands must receive microvias or via-in-pad with OSP or ENIG finish for BGA soldering reliability.
合规信息
RoHS compliant per NXP material declaration; industrial 0 to 105 °C operating range only, not AEC-Q100 automotive grade. Halogen-free status not explicitly listed in the verified web data - marked as unknown.
