P1012NSE2FFB - QorIQ P1012 800MHz SoC | NXP | Networking
料号： P1012NSE2FFB ✗ 停产P1012NSE2FFB 概述
A communications SoC (System-on-Chip) is a highly integrated processor that combines CPU cores, memory controller, networking interfaces, and security accelerators on a single die. The QorIQ P1 family, which includes the P1012 single-core variant and the P1021 dual-core variant, targets cost-effective networking equipment. Within the broader power architecture ecosystem, the P1012 sits between the lower-frequency P1011 and the higher-end P2020, providing a 4.5x aggregate frequency range across the QorIQ P1/P2 platforms.
Key differentiating features include the integrated QUICC Engine for TDM/HDLC offload, the SEC 4.x crypto engine for IPsec/SSL acceleration, hardware ECC for DDR2/DDR3 memory integrity, and a flexible SerDes supporting multiple GbE, PCIe, and SGMII configurations. The 45nm process technology delivers strong performance-per-watt for thermally constrained networking appliances.
Architecturally, the P1012 uses a classic e500v2 core with dual-issue superscalar pipeline, integrated L1 cache, and a 256KB unified L2 cache. The platform's coherence fabric and integrated I/O controllers allow OEMs to build routers, switches, and secure gateways with minimal external logic, reducing BOM cost and PCB complexity.
Typical applications include industrial routers and secure gateways, network attached storage (NAS) controllers, factory automation controllers with Ethernet, line-rate packet inspection appliances, and compact T1/E1 termination equipment. The wide temperature range and integrated SEC engine also make it suitable for industrial automation and secure edge appliances.
Designers should note that this part has reached end-of-life per the NXP product page; long-life-cycle systems should select the P1012NSE2HFB (extended temperature) variant or plan for last-time-buy sourcing. The 689-TEBGA II package requires careful PCB layout for power delivery and DDR3 signal integrity.
This page synthesizes distributor stock levels, pin-compatible NXP alternatives from the QorIQ P1/P2 families, and practical thermal/PCB design notes not found in the manufacturer datasheet alone.
直接替换替代料： P1012NSE2FFB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1012NSE2FFB （相同外形与封装尺寸） ——差异在于 Ethernet, Mounting Type, Package, Process Technology, USB.
P1012NSE2HFB
✅ 直接替换联系询价
查看数据手册 →P1021NXE2FFB
✅ 直接替换📋 参考替代料（不在目录中）
P1011NSN2DFB
✅ 直接替换📋 参考替代料（不在目录中）
P2020NSN2MHB
✅ 直接替换📋 参考替代料（不在目录中）
P1020NSN2DFB
✅ 直接替换📋 参考替代料（不在目录中）
P1012NSE2FFB 最大额定值与电气特性
| Processor Type | PowerPC e500v2 (QorIQ P1) |
| Core Count | 1 |
| 数据总线宽度 | 32-bit |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 45 nm |
| 封装 | 689-TEPBGA II (31x31 mm) |
| 工作温度 | 0C to +125C |
| Silicon Revision | 1.1 |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | Gigabit Ethernet (GbE) |
| PCIe | Yes (integrated) |
| USB | Yes (integrated) |
| TDM | Yes (via QUICC Engine) |
| Security Engine | SEC 4.x |
| 安装类型 | Surface Mount (BGA) |
| Lead Free Status | Lead Free |
| RoHS 状态 | RoHS Compliant |
| Packaging | Tray |
P1012NSE2FFB 689-tepbga ii (31x31 mm) 引脚配置指南
P1012NSE2FFB（689-tepbga ii (31x31 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1012NSE2FFB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1012NSE2FFB 适用于 6 应用s: Industrial Ethernet Router, Secure VPN Gateway, Network Attached Storage Controller, T1/E1 Termination and Multiplexer, Factory Automation Controller, Compact Edge Security Appliance.
Industrial Ethernet Router
The P1012NSE2FFB's integrated GbE MAC, PCIe, and QUICC Engine TDM offload make it ideal for industrial Ethernet routers bridging factory floor networks to enterprise IT. With 800MHz e500v2 compute, hardware IPsec/SSL via SEC 4.x, and a 0C to 125C temperature range, it handles VPN tunnels, NAT, firewall rules, and routing protocols at line rate. Designers typically pair it with a GbE PHY on the GbE interface, external DDR3 with parity protection, and a T1/E1 framer for legacy telecom connectivity, while dissipating approximately 3-5W under typical load in a sealed enclosure.
推荐
Secure VPN Gateway
The SEC 4.x cryptographic engine integrated in the P1012NSE2FFB delivers line-rate IPsec/SSL VPN acceleration, offloading AES-256/SHA-256 from the e500v2 cores. With hardware crypto, the 800MHz SoC sustains hundreds of Mbps of encrypted throughput for branch-office VPN concentrators. The combination of DDR3 with ECC memory protection, PCIe for crypto expansion cards, and 0C to 125C industrial temperature support makes this part a strong fit for industrial and enterprise secure edge appliances deployed in harsh environments or unmanned cabinets.
推荐
Network Attached Storage Controller
The P1012NSE2FFB serves as a compact NAS controller with its PCIe lanes connecting to SATA controllers or RAID HBAs, while the integrated GbE MAC links to the LAN. The 800MHz e500v2 core runs lightweight NAS firmware stacks including SMB/NFS protocol handling, file system management, and storage tiering. DDR3 with ECC protects against bit errors in large capacity drives, and the SEC engine accelerates file-level encryption. Power consumption stays around 3-5W, allowing fanless deployment in home/small office enclosures.
推荐
T1/E1 Termination and Multiplexer
The P1012NSE2FFB's QUICC Engine hardware-accelerates HDLC, PPP, and channelized TDM processing for T1/E1 termination equipment. With multiple TDM channels, the 800MHz e500v2 cores handle call control signaling, voice quality of service, and protocol conversion while offloading bit-level TDM work to the QUICC Engine. The combination of integrated USB, PCIe for additional span cards, and SEC engine for encrypted voice trunks suits compact channel bank and VoIP gateway products targeting small-to-medium business deployments.
推荐
Factory Automation Controller
In factory automation, the P1012NSE2FFB acts as a programmable automation controller (PAC) bridging Ethernet/IP, Modbus TCP, and PROFINET industrial protocols. The 800MHz e500v2 core runs deterministic control loops while the GbE MAC provides real-time industrial Ethernet connectivity with sub-millisecond cycle times. DDR3 with ECC ensures data integrity for long-term process logging, and the 0C to 125C temperature rating supports deployment in factory cabinets without active cooling. PCIe interfaces allow expansion to fieldbus master cards.
推荐
Compact Edge Security Appliance
The P1012NSE2FFB forms the core of a small-form-factor UTM/edge security appliance combining firewall, intrusion detection, and VPN. The integrated SEC 4.x engine accelerates IPsec and SSL inspection at line rate, while the 800MHz e500v2 core runs deep packet inspection rules. With GbE for WAN/LAN segmentation, PCIe for additional network ports, and DDR3 with ECC for reliable packet buffer storage, the part fits in 1U rack-mount appliances or DIN-rail industrial enclosures. Power consumption under load is approximately 4-6W.
推荐
推荐产品汇总
工程参考数据： P1012NSE2FFB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1012NSE2HFB | P1021NXE2FFB | P1011NSN2DFB | P2020NSN2MHB | P1020NSN2DFB |
|---|---|---|---|---|---|---|
| Package | 689-TEBGA II (31x31 mm) | 689-TEBGA II (31x31 mm) - same | 689-TEBGA II (31x31 mm) - same | 689-TEBGA II (31x31 mm) - same | 689-TEBGA II (31x31 mm) - same | 689-TEBGA II (31x31 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Count | 1 | 1 | 2 | 1 | 2 | 1 |
| Process Technology | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
| Security Engine | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x |
| Operating Temperature | 0C to +125C | Extended grade | 0C to +125C | 0C to +105C | 0C to +125C | 0C to +105C |
| Lifecycle Status | EOL | Active | EOL | EOL | Active | EOL |
关键差异点
- Higher core frequency than P1011 variant （对比 P1011NSN2DFB)
- Single-core cost advantage over dual-core P1021 （对比 P1021NXE2FFB)
- Pin-compatible with P2 platform family （对比 P2020NSN2MHB)
- Integrated hardware crypto offload （对比 P1011NSN2DFB)
设计说明
The P1012NSE2FFB TEBGA II package requires a multi-layer PCB with sufficient copper pour and thermal vias under the exposed die area. Estimated power dissipation is 3-6W at 800MHz under typical networking workloads. Design must include thermal vias connecting top-layer copper to internal ground planes; theta-JA is approximately 15-20 C/W with proper via array. Use thermal simulation tools to validate junction temperatures stay below 125C.
DDR3 memory interface requires matched-length routing with controlled impedance (50 ohm single-ended, 100 ohm differential for clock). The 689-TEBGA II package demands high-density interconnect with 0.8mm or finer pitch escape routing. Reference NXP's hardware design guide for DDR3 trace length matching within +/-25 mils and proper termination. Use at least 6 PCB layers for signal integrity and power distribution.
The P1012NSE2FFB requires multiple voltage rails (typically 1.0V core, 1.5V/1.8V DDR, 2.5V/3.3V I/O). Decoupling capacitors must be placed within 5mm of each power pin pair; use 0.1uF ceramic in parallel with 10uF bulk capacitors per rail. The DDR3 VTT termination rail needs a dedicated LDO or termination regulator. Refer to the NXP reference design for recommended power sequencing.
Do not exceed the 0C to 125C operating temperature or the absolute maximum junction temperature of 150C. SERDES lanes should not be reassigned without consulting the SERDES reference manual, as each lane has specific protocol constraints. The QUICC Engine TDM configuration is firmware-dependent; verify TDM clock and frame sync connections against your framer chip's data sheet. Confirm boot configuration pin strapping before PCB layout freeze.
合规信息
RoHS compliant and lead free per NXP product page. Not AEC-Q100 qualified (industrial networking SoC, not automotive). REACH compliance standard for NXP semiconductors. End-of-life status active per NXP PCN.
