PCM1760P-L - 20-Bit Dual Audio ADC | Texas Instruments
料号: PCM1760P-L ✓ 量产中PCM1760P-L 概述
An audio ADC is a semiconductor that converts continuously varying analog audio signals into digital sample values for storage, transmission, mixing, or further signal processing. Delta-sigma converters belong to the ADC family and use oversampling, noise shaping, and digital filtering to achieve high resolution from a relatively simple analog front end. In a signal chain, an ADC follows the microphone or line input, amplifier, and anti-alias filtering stages.
The PCM1760P-L provides dual 20-bit conversion channels and a maximum sampling rate of 50 kSPS. Its enhanced noise-shaping architecture is designed for dynamic applications where low distortion and high effective resolution are important. According to the Texas Instruments PCM1760 datasheet, the associated converter system provides THD+N of -92 dB typical and -90 dB maximum, making it suitable for consumer and professional digital-audio equipment.
The device operates as part of a delta-sigma conversion system that can include a companion DF1760 digital-filter device. The PCM1760 section performs analog-to-digital modulation, while the companion filtering stage applies the decimation required to produce the final PCM audio stream. This division of functions supports flexible system partitioning in equipment requiring serial digital audio data.
Typical uses include CD-player and DVD-player analog sections, digital mixing consoles, audio-recording equipment, broadcast consoles, multichannel home-theater systems, and general-purpose sound-card designs. Its dual-channel architecture reduces component count when stereo audio must be captured concurrently, while the 50 kSPS rate directly supports the 48 kSPS standard used by CD-class audio systems.
PCB design should preserve the short, quiet analog paths required by a high-resolution audio ADC. Place the analog input components close to the corresponding converter pins, maintain a defined ground-return path, and keep digital clock and serial-data routing away from sensitive input nodes. Verify the complete pin assignments, supply requirements, and external filter values against the manufacturer datasheet before laying out a production board.
This product page combines the exact converter identity, package information, core conversion specifications, application guidance, and engineering cautions needed to assess PCM1760P-L. It also distinguishes verified device data from replacement questions by treating pin compatibility as a separate requirement rather than assuming that similar resolution or sampling rate guarantees a drop-in substitution.
直接替换替代料: PCM1760P-L ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料PCM1760P-L 最大额定值与电气特性
| Product Type | Dual-channel delta-sigma analog-to-digital converter |
| 分辨率 | 20 bit |
| Number of Input Channels | 2 channels |
| Maximum Sampling Rate | 50 kSPS |
| Nominal Audio Sampling Rate | 48 kSPS |
| Conversion Architecture | 4-bit, 4th-order, 64-times oversampled delta-sigma modulation |
| THD+N | -92 dB typical; -90 dB maximum |
| Output Format | Serial |
| Analog Input Type | Dual analog input |
| 封装 | 28-pin PDIP |
| 安装类型 | Through-hole |
| Companion Filter Device | DF1760 series |
| AEC-Q100 Qualification | Not applicable |
PCM1760P-L 28-pin pdip 引脚配置指南
PCM1760P-L(28-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1760P-L.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1760P-L 适用于 6 应用s: CD and DVD Player Audio Capture, Professional Audio Recording Console, Digital Mixer and Sound Processor, Digital Audio Interface, Broadcast and Studio Monitoring, Home Theater and Multimedia Equipment.
CD and DVD Player Audio Capture
The PCM1760P-L fits stereo 48 kSPS audio paths in CD- and DVD-class equipment because its dual 20-bit channels operate up to 50 kSPS. The dual-channel architecture captures left and right signals simultaneously, reducing the number of converters required for stereo systems. Its delta-sigma modulator and companion DF1760 digital-filter arrangement support a clean separation between analog conversion and decimation. Board layout should preserve short analog inputs, isolate clock traces, and use the manufacturer’s recommended supply bypassing.
推荐
Professional Audio Recording Console
A recording console can use the PCM1760P-L to convert two balanced analog channels into high-resolution digital audio samples at 48 kSPS. The 20-bit conversion format and -92 dB typical THD+N rating are useful when the complete analog path preserves signal integrity. Because the converter handles modulation while the DF1760 performs decimation, the system partition must follow the manufacturer’s timing and grounding architecture. Use low-noise input amplifiers and carefully separated analog and digital returns.
推荐
Digital Mixer and Sound Processor
The PCM1760P-L is suitable for stereo conversion stages in digital mixers and general sound processors operating at 48 kSPS. Its two channels reduce board area compared with separate single-channel converters, while the serial output supports connection to digital signal-processing circuitry. The 50 kSPS ceiling matches common CD-derived audio rates but does not support higher-resolution PCM formats such as 96 kHz. Validate interface timing and filtering before using the converter with a modern audio bus.
推荐
Digital Audio Interface
A digital audio interface can use the PCM1760P-L for stereo analog-to-digital conversion before samples are transmitted or processed. The device’s 20-bit resolution, dual-channel format, and serial interface suit classic digital-audio equipment, while its 48 kSPS operating capability aligns with conventional consumer audio. Designers should treat the serial clock as a critical signal, keep it away from analog inputs, and follow the datasheet’s pin and decoupling guidance. The companion DF1760 completes the required decimation path.
推荐
Broadcast and Studio Monitoring
The PCM1760P-L can support monitoring and auxiliary stereo capture stages that operate at 48 kSPS. Its dual 20-bit channels provide sufficient nominal resolution for many professional monitoring paths, while the -92 dB typical THD+N specification establishes a useful converter benchmark. Overall monitoring accuracy still depends on input-referenced design, preamplifier noise, analog filter quality, grounding, and clock implementation. Confirm that the 28-pin PDIP package remains compatible with the target product architecture.
推荐
Home Theater and Multimedia Equipment
PCM1760P-L suits legacy home-theater and multimedia products requiring two simultaneous 48 kSPS audio channels. The converter can capture stereo analog sources for internal digital processing, storage, or transmission, while its serial interface avoids a parallel-data footprint. Its maximum 50 kSPS rate is appropriate for CD-derived audio but not modern 96 kHz or 192 kHz formats. Use the exact manufacturer application information when partitioning the modulator, companion filter, clock source, and analog input network.
推荐
推荐产品汇总
工程参考数据: PCM1760P-L ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Texas Instruments |
| Package | 28-pin PDIP |
| Resolution | 20 bit |
| Input Channels | 2 channels |
| Maximum Sampling Rate | 50 kSPS |
| Conversion Architecture | 4-bit, 4th-order, 64-times oversampled delta-sigma modulation |
| THD+N | -92 dB typical; -90 dB maximum |
| Output Interface | Serial |
| Mounting Type | Through-hole |
关键差异点
- Dual-channel conversion in one package (对比 Single-channel 20-bit PDIP ADC)
- Direct support for 48 kSPS audio (对比 Lower-rate 20-bit ADC)
- Low-conversion-noise performance for the class (对比 Lower-performance delta-sigma ADC)
设计说明
Keep the two analog input networks close to their corresponding PCM1760P-L pins and use the shortest practical return path to the device ground. Place analog bypass components on the same side of the PCB as the converter whenever possible. A 28-pin PDIP makes analog routing visible and accessible, but it does not compensate for long traces or shared noisy return currents. Follow the manufacturer’s reference configuration for resistor values and capacitor placement.
Separate the analog modulation section from the digital data and clock paths. Route the serial clock away from input pins, avoid running clock traces beneath the converter or analog-input network, and provide a stable quiet ground reference. Because the DF1760 performs decimation in a companion stage, follow the complete PCM1760/DF1760 system layout rather than treating the converter and digital filter as unrelated blocks.
Do not select a replacement based only on 20-bit resolution and a 50 kSPS sample rate. A drop-in device must also reproduce the 28-pin PDIP footprint, analog-input levels, serial protocol, clock polarity, supply requirements, and decoupling arrangement. Similarly, do not assume that PCM1760P without the -L suffix is interchangeable; verify its package and orderable suffix in the manufacturer documentation before approving a substitution.
合规信息
The PCM1760P-L is a commercial audio converter rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or authorized documentation.