PCM1760P-L - 20-Bit Dual Audio ADC | Texas Instruments
N.º da peça: PCM1760P-L ✓ AtivoPCM1760P-L Visão geral
An audio ADC is a semiconductor that converts continuously varying analog audio signals into digital sample values for storage, transmission, mixing, or further signal processing. Delta-sigma converters belong to the ADC family and use oversampling, noise shaping, and digital filtering to achieve high resolution from a relatively simple analog front end. In a signal chain, an ADC follows the microphone or line input, amplifier, and anti-alias filtering stages.
The PCM1760P-L provides dual 20-bit conversion channels and a maximum sampling rate of 50 kSPS. Its enhanced noise-shaping architecture is designed for dynamic applications where low distortion and high effective resolution are important. According to the Texas Instruments PCM1760 datasheet, the associated converter system provides THD+N of -92 dB typical and -90 dB maximum, making it suitable for consumer and professional digital-audio equipment.
The device operates as part of a delta-sigma conversion system that can include a companion DF1760 digital-filter device. The PCM1760 section performs analog-to-digital modulation, while the companion filtering stage applies the decimation required to produce the final PCM audio stream. This division of functions supports flexible system partitioning in equipment requiring serial digital audio data.
Typical uses include CD-player and DVD-player analog sections, digital mixing consoles, audio-recording equipment, broadcast consoles, multichannel home-theater systems, and general-purpose sound-card designs. Its dual-channel architecture reduces component count when stereo audio must be captured concurrently, while the 50 kSPS rate directly supports the 48 kSPS standard used by CD-class audio systems.
PCB design should preserve the short, quiet analog paths required by a high-resolution audio ADC. Place the analog input components close to the corresponding converter pins, maintain a defined ground-return path, and keep digital clock and serial-data routing away from sensitive input nodes. Verify the complete pin assignments, supply requirements, and external filter values against the manufacturer datasheet before laying out a production board.
This product page combines the exact converter identity, package information, core conversion specifications, application guidance, and engineering cautions needed to assess PCM1760P-L. It also distinguishes verified device data from replacement questions by treating pin compatibility as a separate requirement rather than assuming that similar resolution or sampling rate guarantees a drop-in substitution.
Alternativas drop-in para PCM1760P-L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasPCM1760P-L Classificações máximas e características elétricas
| Product Type | Dual-channel delta-sigma analog-to-digital converter |
| Resolução | 20 bit |
| Number of Input Channels | 2 channels |
| Maximum Sampling Rate | 50 kSPS |
| Nominal Audio Sampling Rate | 48 kSPS |
| Conversion Architecture | 4-bit, 4th-order, 64-times oversampled delta-sigma modulation |
| THD+N | -92 dB typical; -90 dB maximum |
| Output Format | Serial |
| Analog Input Type | Dual analog input |
| Encapsulamento | 28-pin PDIP |
| Tipo de montagem | Through-hole |
| Companion Filter Device | DF1760 series |
| AEC-Q100 Qualification | Not applicable |
Guia de Configuração de Pinos do PCM1760P-L 28-pin pdip
Configuração de pinos para PCM1760P-L (pacote 28-pin pdip). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1760P-L.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1760P-L é adequado para 6 aplicaçãos: CD and DVD Player Audio Capture, Professional Audio Recording Console, Digital Mixer and Sound Processor, Digital Audio Interface, Broadcast and Studio Monitoring, Home Theater and Multimedia Equipment.
CD and DVD Player Audio Capture
The PCM1760P-L fits stereo 48 kSPS audio paths in CD- and DVD-class equipment because its dual 20-bit channels operate up to 50 kSPS. The dual-channel architecture captures left and right signals simultaneously, reducing the number of converters required for stereo systems. Its delta-sigma modulator and companion DF1760 digital-filter arrangement support a clean separation between analog conversion and decimation. Board layout should preserve short analog inputs, isolate clock traces, and use the manufacturer’s recommended supply bypassing.
Recomendado
Professional Audio Recording Console
A recording console can use the PCM1760P-L to convert two balanced analog channels into high-resolution digital audio samples at 48 kSPS. The 20-bit conversion format and -92 dB typical THD+N rating are useful when the complete analog path preserves signal integrity. Because the converter handles modulation while the DF1760 performs decimation, the system partition must follow the manufacturer’s timing and grounding architecture. Use low-noise input amplifiers and carefully separated analog and digital returns.
Recomendado
Digital Mixer and Sound Processor
The PCM1760P-L is suitable for stereo conversion stages in digital mixers and general sound processors operating at 48 kSPS. Its two channels reduce board area compared with separate single-channel converters, while the serial output supports connection to digital signal-processing circuitry. The 50 kSPS ceiling matches common CD-derived audio rates but does not support higher-resolution PCM formats such as 96 kHz. Validate interface timing and filtering before using the converter with a modern audio bus.
Recomendado
Digital Audio Interface
A digital audio interface can use the PCM1760P-L for stereo analog-to-digital conversion before samples are transmitted or processed. The device’s 20-bit resolution, dual-channel format, and serial interface suit classic digital-audio equipment, while its 48 kSPS operating capability aligns with conventional consumer audio. Designers should treat the serial clock as a critical signal, keep it away from analog inputs, and follow the datasheet’s pin and decoupling guidance. The companion DF1760 completes the required decimation path.
Recomendado
Broadcast and Studio Monitoring
The PCM1760P-L can support monitoring and auxiliary stereo capture stages that operate at 48 kSPS. Its dual 20-bit channels provide sufficient nominal resolution for many professional monitoring paths, while the -92 dB typical THD+N specification establishes a useful converter benchmark. Overall monitoring accuracy still depends on input-referenced design, preamplifier noise, analog filter quality, grounding, and clock implementation. Confirm that the 28-pin PDIP package remains compatible with the target product architecture.
Recomendado
Home Theater and Multimedia Equipment
PCM1760P-L suits legacy home-theater and multimedia products requiring two simultaneous 48 kSPS audio channels. The converter can capture stereo analog sources for internal digital processing, storage, or transmission, while its serial interface avoids a parallel-data footprint. Its maximum 50 kSPS rate is appropriate for CD-derived audio but not modern 96 kHz or 192 kHz formats. Use the exact manufacturer application information when partitioning the modulator, companion filter, clock source, and analog input network.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1760P-L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Texas Instruments |
| Package | 28-pin PDIP |
| Resolution | 20 bit |
| Input Channels | 2 channels |
| Maximum Sampling Rate | 50 kSPS |
| Conversion Architecture | 4-bit, 4th-order, 64-times oversampled delta-sigma modulation |
| THD+N | -92 dB typical; -90 dB maximum |
| Output Interface | Serial |
| Mounting Type | Through-hole |
Principais diferenciais
- Dual-channel conversion in one package (vs Single-channel 20-bit PDIP ADC)
- Direct support for 48 kSPS audio (vs Lower-rate 20-bit ADC)
- Low-conversion-noise performance for the class (vs Lower-performance delta-sigma ADC)
Notas de projeto
Keep the two analog input networks close to their corresponding PCM1760P-L pins and use the shortest practical return path to the device ground. Place analog bypass components on the same side of the PCB as the converter whenever possible. A 28-pin PDIP makes analog routing visible and accessible, but it does not compensate for long traces or shared noisy return currents. Follow the manufacturer’s reference configuration for resistor values and capacitor placement.
Separate the analog modulation section from the digital data and clock paths. Route the serial clock away from input pins, avoid running clock traces beneath the converter or analog-input network, and provide a stable quiet ground reference. Because the DF1760 performs decimation in a companion stage, follow the complete PCM1760/DF1760 system layout rather than treating the converter and digital filter as unrelated blocks.
Do not select a replacement based only on 20-bit resolution and a 50 kSPS sample rate. A drop-in device must also reproduce the 28-pin PDIP footprint, analog-input levels, serial protocol, clock polarity, supply requirements, and decoupling arrangement. Similarly, do not assume that PCM1760P without the -L suffix is interchangeable; verify its package and orderable suffix in the manufacturer documentation before approving a substitution.
Informações de conformidade
The PCM1760P-L is a commercial audio converter rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or authorized documentation.