Microchip Technology

PIC24FJ64GA406-I/MR - 32MHz 16-Bit XLP MCU | Microchip

料号: PIC24FJ64GA406-I/MR ✓ 量产中
2.0V to 3.5V Vdss 64-QFN (9mm x 9mm) Package 32 MHz Speed 64KB Flash (22K x 24 bits) Memory
最小起订量: 1 |

PIC24FJ64GA406-I/MR 概述

The Microchip Technology PIC24FJ64GA406-I/MR is a 16-bit PIC24F microcontroller operating at up to 32MHz, with 64KB of Flash memory, 8KB of RAM, hardware cryptography, and segmented LCD support in a 64-QFN package measuring 9mm by 9mm. It is designed for low-power embedded systems that require substantial flash memory, secure data handling, and glass-segment display control.

A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals on one device. The PIC24F belongs to the 16-bit microcontroller family within the broader embedded semiconductor and embedded processing categories. This architecture combines a 16-bit instruction set with dedicated hardware for timers, communications, analog measurement, LCD segments, and security, making it suitable for compact control products that must conserve energy while managing multiple peripherals.

The PIC24FJ64GA406-I/MR combines 64KB Flash, equivalent to 22K by 24 bits, with 8KB of SRAM and a maximum CPU frequency of 32MHz, corresponding to 16 MIPS in the manufacturer listing. Its integrated crypto module adds hardware-level security capability to the low-power design. The family also supports segmented LCD output, reducing the need for separate display-driver circuitry in instruments, appliances, meters, and control panels.

The device operates from 2.0V to 3.5V and provides 53 I/O pins, 106 interrupt sources, and six traps according to the manufacturer family information. These resources support concurrent handling of user-interface events, timing functions, communications, sensor acquisition, and system exceptions. Its XLP designation identifies the family’s eXtreme Low Power operating focus, which is valuable for battery-operated equipment with long idle periods.

Typical applications include segmented-LCD utility meters, industrial panel controllers, secure handheld instruments, low-energy sensor nodes, and compact consumer appliances. The 9mm by 9mm QFN package supports dense board layouts, while the 64-pin arrangement provides extensive peripheral connectivity without moving to a larger package.

Designers should preserve the exposed-pad and thermal-via arrangement defined by the manufacturer’s package drawing and use the recommended decoupling and programming interfaces. Firmware migration should also account for peripheral, register, and LCD-channel differences across PIC24FJ64GA series members before assigning a substitute to an existing PCB.

直接替换替代料: PIC24FJ64GA406-I/MR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC24FJ64GA406-I/MR (相同外形与封装尺寸) ——差异在于 Package.

Microchip Technology
Package: 64-pin VQFN (MR) 9x9 mm with exposed pad

PIC24FJ64GA406T-I/MR

✅ 直接替换
📦 64-QFN (9mm x 9mm)
Same 32MHz CPU, 64KB Flash, 8KB RAM, and 64-QFN footprint; 0% difference in the stated core ratings, with the ordering-grade distinction requiring manufacturer confirmation.

📋 参考替代料(不在目录中)

PIC24FJ64GA106-I/MR

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 64-QFN (9mm x 9mm)
PIC24F (MIPS16), 16-bit · Modified Harvard RISC · 32 MHz (16 MIPS) · 64 KB (22K x 24) · 8 KB (16 KB on some family variants, see _validation_note) · 2.0 V to 3.6 V · Up to 84 · 64-pin VQFN (MR) 9x9 mm with exposed pad

联系询价

查看数据手册 →

PIC24FJ64GA206-I/MR

✅ 直接替换 ⚠️ 规格未核验
📦 64-QFN (9mm x 9mm)
Same 32MHz CPU, 64KB Flash, 8KB RAM, and 64-QFN footprint; 0% difference in the stated core ratings, with family-specific peripheral differences to be checked.

📋 参考替代料(不在目录中)

PIC24FJ64GA306-I/MR

✅ 直接替换 ⚠️ 规格未核验
📦 64-QFN (9mm x 9mm)
Same 32MHz CPU, 64KB Flash, 8KB RAM, and 64-QFN footprint; 0% difference in the stated core ratings, while LCD and peripheral mappings must be verified.

📋 参考替代料(不在目录中)

PIC24FJ64GA106-E/MR

✅ 直接替换
📦 64-VQFN (9mm x 9mm)
Same 32MHz CPU, 64KB Flash, 8KB RAM, and 64-VQFN 9mm by 9mm footprint; 0% difference in the stated core ratings, with a distinct -E ordering grade.

📋 参考替代料(不在目录中)

PIC24FJ64GA406-I/MR 最大额定值与电气特性

Processor Architecture 16-bit PIC24F
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 64KB Flash (22K x 24 bits)
Data Memory 8KB RAM
工作电源电压 2.0V to 3.5V
I/O Pin Count 53 pins
Interrupt Sources 106 sources
Trap Count 6 traps
Cryptography Integrated crypto module
Display Support Segmented LCD
Power Class PIC XLP eXtreme Low Power
封装 64-QFN (9mm x 9mm)
安装类型 Surface mount
Temperature Grade Industrial grade

PIC24FJ64GA406-I/MR 64-qfn (9mm x 9mm) 引脚配置指南

PIC24FJ64GA406-I/MR(64-qfn (9mm x 9mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC24FJ64GA406-I/MR 的 64-qfn (9mm x 9mm) 封装引脚图

暂无详细引脚数据: PIC24FJ64GA406-I/MR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC24FJ64GA406-I/MR 适用于 6 应用s: Segmented LCD Utility Meter, Battery-Powered Sensor Node, Secure Handheld Instrument, Industrial Control Panel, Low-Energy Home Appliance, Data Acquisition and Monitoring System.

🔧

Segmented LCD Utility Meter

The PIC24FJ64GA406-I/MR fits utility meters because it combines segmented LCD support with 64KB of Flash and 8KB of RAM for measurement, calibration, and user-interface logic. Its 2.0V to 3.5V operating range supports low-energy designs, while the listed 16 MIPS execution rate provides capacity for timing and signal-processing routines. The 53 I/O pins permit connection of sensors, buttons, and communication logic alongside the LCD. Using the integrated segmented display controller can reduce external driver complexity. Before layout release, map the exact LCD channels, common-drive connections, and alternate functions from the manufacturer pin and LCD tables for the 64-QFN package.

🧩

Battery-Powered Sensor Node

PIC24FJ64GA406-I/MR is suitable for a battery-powered sensor node that wakes periodically, acquires measurements, and transmits compact data. Its XLP eXtreme Low Power family positioning supports energy-conscious operation, while 64KB Flash provides room for drivers and application firmware without an external memory device. The 8KB RAM can buffer acquisition and communication work, and the 106 listed interrupt sources support concurrent timing and peripheral events. Designers should use the manufacturer’s clock, sleep-mode, and peripheral examples to minimize active current. Battery life should be evaluated using the selected sleep mode, sensor duty cycle, radio activity, and display load rather than CPU frequency alone.

💊

Secure Handheld Instrument

The integrated crypto module makes PIC24FJ64GA406-I/MR relevant to handheld instruments that exchange authenticated or protected data. The 16-bit core operates at 32MHz and 16 MIPS, giving enough performance for control loops, display updates, and communication servicing within a compact 64-QFN footprint. A 2.0V to 3.5V supply range supports low-voltage product architectures, while 8KB RAM supports working data and protocol buffers. Firmware designers should partition authentication, secret handling, and update functions around the manufacturer’s cryptographic peripheral documentation. Final security suitability also depends on the selected algorithms, key lifecycle, interface exposure, and the system-level threat model.

🏭

Industrial Control Panel

PIC24FJ64GA406-I/MR can serve as the central controller in an industrial control panel containing a segmented display, status indicators, switches, and field-bus interfaces. Its 53 I/O pins provide substantial connection capacity, while the 64KB Flash and 8KB RAM support menu logic, diagnostics, data logging, and protocol handling. The 32MHz core helps service multiple interrupt-driven peripherals without requiring a higher-power processor. Designers should assign pins using the alternate-function matrix and preserve the QFN exposed-pad layout. A hardware revision should also verify logic thresholds, LCD drive configuration, external pull resistors, isolation boundaries, and restart behavior under industrial power transients.

🏠

Low-Energy Home Appliance

PIC24FJ64GA406-I/MR is appropriate for compact appliances that combine a small display, buttons, timers, and low-power sensing. The XLP operating focus can help reduce energy consumption during idle periods, while 64KB Flash accommodates control algorithms and user-interface code. The integrated segmented LCD capability is useful for appliances that show status, temperature, timers, or operating modes without deploying a graphical display. A practical design should minimize always-on peripherals, use the manufacturer’s clock configuration carefully, and place external switching noise away from sensitive analog and LCD inputs. Firmware should also account for brownout behavior and safe restart states before appliance production begins.

📡

Data Acquisition and Monitoring System

PIC24FJ64GA406-I/MR can coordinate a compact data-acquisition system that must sample sensors, timestamp events, react to interrupts, and present local information. The 16-bit PIC24F architecture, 32MHz clock, and 16 MIPS throughput support responsive foreground and interrupt-driven routines, while 8KB RAM provides a practical working buffer. With 106 listed interrupt sources and six traps, the controller can manage multiple peripheral events while preserving fault visibility. Designers should validate analog-input topology, reference voltage, sampling timing, and calibration strategy using the manufacturer’s electrical characteristics. The 64-QFN footprint also requires thermal-via and exposed-pad layout compliance to avoid assembly and temperature-rise problems.

推荐产品汇总

PIC24FJ64GA406T-I/MR Same-family 64-QFN controller for display-oriented designs 用于: Segmented LCD Utility Meter, Industrial Control Panel, Data Acquisition and Monitoring System PIC24FJ64GA106-I/MR Microchip Technology 用于: Segmented LCD Utility Meter, Battery-Powered Sensor Node, Industrial Control Panel, Low-Energy Home Appliance PIC24FJ64GA206-I/MR Same-package PIC24FJ64GA family alternative 用于: Battery-Powered Sensor Node, Low-Energy Home Appliance PIC24FJ64GA306-I/MR Same-package PIC24FJ64GA family alternative 用于: Secure Handheld Instrument, Data Acquisition and Monitoring System PIC24FJ64GA106-E/MR Same-footprint alternative with distinct ordering grade 用于: Secure Handheld Instrument
What is the PIC24FJ64GA406-I/MR?
The PIC24FJ64GA406-I/MR is a 16-bit PIC24F low-power microcontroller with 64KB Flash, 8KB RAM, a 32MHz operating speed, hardware cryptography, and segmented LCD support. According to the Microchip product page, its combination of memory, security, and display features is intended for low-power embedded products. The device is supplied in a 64-QFN package measuring 9mm by 9mm and operates from 2.0V to 3.5V.
What are the key specifications of PIC24FJ64GA406-I/MR that engineers should know?
The PIC24FJ64GA406-I/MR is a 16-bit PIC24F MCU rated for 32MHz operation and 16 MIPS instruction throughput, with 64KB Flash, 8KB RAM, and 53 I/O pins. The manufacturer family information identifies 106 interrupt sources, six traps, a 2.0V to 3.5V operating range, and segmented LCD capability. Its integrated crypto module and XLP power-management focus distinguish it from general-purpose MCUs without the same hardware-security or display emphasis.
Where can I download the PIC24FJ64GA406-I/MR datasheet PDF?
The official PIC24FJ64GA406-I/MR datasheet and supporting documentation are accessed through the Microchip PIC24FJ64GA406 product page. The manufacturer describes the device as a 16-bit, 32MHz microcontroller with 64KB Flash, 8KB RAM, an integrated crypto module, segmented LCD support, and XLP operation. Use the product page’s documentation links to select the current device data sheet, programming specification, and package information.
Where can I find the PIC24FJ64GA406-I/MR pinout?
The PIC24FJ64GA406-I/MR pinout is published in the manufacturer’s PIC24FJ64GA406 data sheet and package drawings. The device uses a 64-QFN package with a 9mm by 9mm body. Assign PCB nets using the numbered pin-description table and exposed-pad guidance from those documents, because the exposed thermal pad and programming or debug pins must be connected according to the exact board-level implementation.
Is the PIC24FJ64GA406-I/MR suitable for battery-operated instruments?
Yes, the PIC24FJ64GA406-I/MR is suitable for many battery-operated instruments because it belongs to the PIC XLP eXtreme Low Power family and provides integrated segmented LCD support. Its 2.0V to 3.5V operating range also allows use with low-voltage power systems. The XLP feature set can reduce energy use during idle periods, although the final battery life depends on the selected XLP mode, wake-up rate, display duty cycle, and peripheral configuration.
What can replace the PIC24FJ64GA406-I/MR on the same PCB?
The closest same-package candidates are PIC24FJ64GA406T-I/MR, PIC24FJ64GA106-I/MR, PIC24FJ64GA206-I/MR, and PIC24FJ64GA306-I/MR from the Microchip PIC24FJ64GA family. Each retains the listed 64KB Flash, 8KB RAM, 32MHz core speed, and 64-QFN 9mm by 9mm footprint. Firmware and board compatibility still require checking LCD channels, peripheral assignments, pin multiplexing, voltage thresholds, and package-level programming details.
Can PIC24FJ64GA106-I/MR replace PIC24FJ64GA406-I/MR?
PIC24FJ64GA106-I/MR is a candidate drop-in replacement because both parts use the 64-QFN 9mm by 9mm package and share the listed 32MHz CPU, 64KB Flash, and 8KB RAM resources. The important qualification is that matching package dimensions do not by themselves guarantee peripheral compatibility. Before replacement, compare LCD segment assignments, I/O multiplexing, analog functions, interrupt vectors, clock settings, and programming configuration for both devices.
PIC24FJ64GA406-I/MR vs PIC24FJ64GA406T-I/MR — which is better?
PIC24FJ64GA406-I/MR and PIC24FJ64GA406T-I/MR share the same listed 16-bit architecture, 32MHz speed, 64KB Flash, 8KB RAM, and 64-QFN 9mm by 9mm package. Their ordering codes differ, so the exact temperature, marking, or ordering distinction must be confirmed against the manufacturer’s ordering information for the installed variant. Choose based on the required grade and production configuration, not on the core memory or CPU ratings.
When should I choose PIC24FJ64GA406-I/MR instead of another PIC24FJ64GA device?
Choose PIC24FJ64GA406-I/MR when the design needs the family’s 32MHz 16-bit core, 64KB Flash, 8KB RAM, integrated hardware crypto, segmented LCD support, and 64-QFN footprint together. Select another family member only after confirming that its LCD channels, I/O map, analog peripherals, interrupt layout, and programming configuration match the target board. This component is particularly appropriate for compact, low-power instruments and security-conscious control panels.
Is PIC24FJ64GA406-I/MR suitable for a segmented LCD display?
Yes, PIC24FJ64GA406-I/MR includes segmented LCD capability and is a strong fit for meters and control panels using common glass-segment displays. The 53 available I/O pins also allow the system to connect sensors, buttons, communication interfaces, and other controls alongside the display. Final segment allocation and pin multiplexing must follow the manufacturer’s LCD-channel and alternate-function tables for the selected package.
Where to buy PIC24FJ64GA406-I/MR online?
Use the Request a Quote form on this page to ask for PIC24FJ64GA406-I/MR availability, quantity breaks, and delivery terms. The form allows the request to identify the exact 64-QFN ordering code and required quantity without relying on a generic catalog listing. Confirm the manufacturer’s authorized-channel status and date-code requirements as part of the purchasing response before committing the component to a production build.
What is the price of PIC24FJ64GA406-I/MR?
Pricing for PIC24FJ64GA406-I/MR is generated through the Request a Quote form on this page because commercial terms can change with quantity, supply, and date code. The form requests the exact MPN, order quantity, and delivery requirements, allowing a current quotation to be prepared without embedding a stale price in technical content. Buyers should also confirm packaging, production quantity, and traceability requirements in the returned quotation.
What is the lead time and stock status for PIC24FJ64GA406-I/MR?
Current stock and lead time for PIC24FJ64GA406-I/MR should be requested through the Request a Quote form on this page. Include the required quantity, packaging preference, target delivery date, and any date-code restrictions so the response reflects the intended production schedule. For scheduled demand, request rolling delivery and factory-fresh lot information as part of the commercial discussion.
Is PIC24FJ64GA406-I/MR in stock?
PIC24FJ64GA406-I/MR availability is handled through the Request a Quote form on this page. Submit the required quantity and any target date, and the purchasing response will identify current supply and expected lead time for the exact ordering code. This approach avoids treating a catalog presence as guaranteed inventory and helps distinguish immediate delivery from scheduled production allocation.
Does the PIC24FJ64GA406-I/MR include hardware cryptography?
Yes, the Microchip product page identifies an integrated crypto module in the PIC24FJ64GA406 family. This gives the device dedicated hardware support for security-sensitive functions rather than relying only on software algorithms. The exact cryptographic algorithms, key-storage capabilities, interfaces, and usage limitations should be confirmed in the manufacturer’s security and programming documentation before a security architecture is approved.

工程参考数据: PIC24FJ64GA406-I/MR ——对比、设计指导和合规信息。

选型指南

Choose PIC24FJ64GA406-I/MR when a compact 64-QFN design needs the combination of 64KB Flash, 8KB RAM, 32MHz performance, segmented LCD control, and an integrated crypto module. PIC24FJ64GA406T-I/MR is the closest ordering-code candidate when its documented grade configuration matches the production requirement. Consider PIC24FJ64GA106-I/MR, PIC24FJ64GA206-I/MR, or PIC24FJ64GA306-I/MR only after their LCD channels, I/O map, analog functions, timer resources, interrupt layout, and programming configuration have been compared with the target design. PIC24FJ64GA106-E/MR is another same-footprint candidate distinguished by its ordering grade. In every substitution, verify the exposed-pad layout, supply limits, peripheral assignments, firmware compatibility, and production availability before approving the change.

与替代料对比

参数 本产品 PIC24FJ64GA406T-I/MR PIC24FJ64GA106-I/MR PIC24FJ64GA206-I/MR PIC24FJ64GA306-I/MR PIC24FJ64GA106-E/MR
Package 64-QFN (9mm x 9mm) 64-QFN (9mm x 9mm) 64-QFN (9mm x 9mm) 64-QFN (9mm x 9mm) 64-QFN (9mm x 9mm) 64-VQFN (9mm x 9mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology

关键差异点

  • Combines segmented LCD control with hardware cryptography (对比 PIC24FJ64GA106-I/MR)
  • Uses the listed 64-QFN 9mm by 9mm package (对比 PIC24FJ64GA106-E/MR)
  • Delivers 16 MIPS from a 16-bit PIC24F core (对比 PIC24FJ64GA206-I/MR)

设计说明

Use the manufacturer’s 64-QFN land pattern and exposed-pad drawing when placing the device. The QFN body is 9mm by 9mm, but the peripheral pad geometry, thermal-via arrangement, and solder-mask rules determine assembly reliability. Connect the exposed pad as directed by the package documentation rather than treating it as an optional thermal feature. Keep programming and debug access unobstructed so the board can be programmed and inspected without a permanent connection fixture.

The PIC24FJ64GA406-I/MR operates from 2.0V to 3.5V, so power sequencing and brownout behavior deserve explicit review. Place the manufacturer-recommended bypass capacitors close to the supply pins, maintain short return paths, and ensure the upstream source can support startup current without pulling the rail outside its operating limits. For battery systems, evaluate average current using the selected XLP sleep mode, timer wake-ups, analog conversions, display refresh, and communications activity rather than the maximum clock rate alone.

A same-package family member is not automatically a functional replacement. Before substituting PIC24FJ64GA406-I/MR with GA106, GA206, or GA306, compare LCD channel assignments, I/O multiplexing, analog peripheral locations, interrupt vectors, timer channels, clock configuration, programming requirements, and brownout settings. Reuse of the PCB footprint should be followed by firmware and configuration review because a physical fit does not guarantee identical peripheral behavior.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The -I ordering suffix identifies an industrial-grade ordering configuration, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated on the manufacturer product page excerpt.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PIC24FJ64GA406-I/MR datasheet PIC24FJ64GA406 datasheet pdf PIC24FJ64GA406-I/MR pinout PIC24FJ64GA406-I/MR footprint PIC24FJ64GA406-I/MR specifications PIC24FJ64GA406-I/MR equivalent PIC24FJ64GA406-I/MR replacement PIC24FJ64GA406-I/MR cross reference PIC24FJ64GA406-I/MR vs PIC24FJ64GA106-I/MR Microchip PIC24FJ64GA406-I/MR PIC24FJ64GA406-I/MR price PIC24FJ64GA406-I/MR stock PIC24FJ64GA406 segmented LCD application PIC24FJ64GA406 programming

相关元器件 & 术语

Microchip Technology PIC24FJ64GA406-I/MR PIC24FJ64GA406T-I/MR PIC24FJ64GA106-I/MR PIC24FJ64GA206-I/MR PIC24FJ64GA306-I/MR PIC24FJ64GA106-E/MR PIC24F 16-bit microcontroller embedded processor semiconductor PIC XLP eXtreme Low Power integrated crypto module segmented LCD 64-QFN 64-VQFN QFN package family surface-mount package 32MHz 16 MIPS 64KB Flash 8KB RAM 53 I/O pins
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情