PIC24FJ64GA406-I/MR - 32MHz 16-Bit XLP MCU | Microchip
부품 번호: PIC24FJ64GA406-I/MR ✓ 활성PIC24FJ64GA406-I/MR 개요
A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals on one device. The PIC24F belongs to the 16-bit microcontroller family within the broader embedded semiconductor and embedded processing categories. This architecture combines a 16-bit instruction set with dedicated hardware for timers, communications, analog measurement, LCD segments, and security, making it suitable for compact control products that must conserve energy while managing multiple peripherals.
The PIC24FJ64GA406-I/MR combines 64KB Flash, equivalent to 22K by 24 bits, with 8KB of SRAM and a maximum CPU frequency of 32MHz, corresponding to 16 MIPS in the manufacturer listing. Its integrated crypto module adds hardware-level security capability to the low-power design. The family also supports segmented LCD output, reducing the need for separate display-driver circuitry in instruments, appliances, meters, and control panels.
The device operates from 2.0V to 3.5V and provides 53 I/O pins, 106 interrupt sources, and six traps according to the manufacturer family information. These resources support concurrent handling of user-interface events, timing functions, communications, sensor acquisition, and system exceptions. Its XLP designation identifies the family’s eXtreme Low Power operating focus, which is valuable for battery-operated equipment with long idle periods.
Typical applications include segmented-LCD utility meters, industrial panel controllers, secure handheld instruments, low-energy sensor nodes, and compact consumer appliances. The 9mm by 9mm QFN package supports dense board layouts, while the 64-pin arrangement provides extensive peripheral connectivity without moving to a larger package.
Designers should preserve the exposed-pad and thermal-via arrangement defined by the manufacturer’s package drawing and use the recommended decoupling and programming interfaces. Firmware migration should also account for peripheral, register, and LCD-channel differences across PIC24FJ64GA series members before assigning a substitute to an existing PCB.
드롭인 대체품: PIC24FJ64GA406-I/MR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ64GA406-I/MR (동일 폼 팩터 및 풋프린트) — 차이점: Package.
PIC24FJ64GA406T-I/MR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA106-I/MR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC24FJ64GA206-I/MR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA306-I/MR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA106-E/MR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA406-I/MR 최대 정격 & 전기적 특성
| Processor Architecture | 16-bit PIC24F |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 64KB Flash (22K x 24 bits) |
| Data Memory | 8KB RAM |
| 동작 공급 전압 | 2.0V to 3.5V |
| I/O Pin Count | 53 pins |
| Interrupt Sources | 106 sources |
| Trap Count | 6 traps |
| Cryptography | Integrated crypto module |
| Display Support | Segmented LCD |
| Power Class | PIC XLP eXtreme Low Power |
| 패키지 | 64-QFN (9mm x 9mm) |
| 실장 유형 | Surface mount |
| Temperature Grade | Industrial grade |
PIC24FJ64GA406-I/MR 64-qfn (9mm x 9mm) 핀 구성 가이드
PIC24FJ64GA406-I/MR(64-qfn (9mm x 9mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24FJ64GA406-I/MR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24FJ64GA406-I/MR 적합 용도: 6 애플리케이션s: Segmented LCD Utility Meter, Battery-Powered Sensor Node, Secure Handheld Instrument, Industrial Control Panel, Low-Energy Home Appliance, Data Acquisition and Monitoring System.
Segmented LCD Utility Meter
The PIC24FJ64GA406-I/MR fits utility meters because it combines segmented LCD support with 64KB of Flash and 8KB of RAM for measurement, calibration, and user-interface logic. Its 2.0V to 3.5V operating range supports low-energy designs, while the listed 16 MIPS execution rate provides capacity for timing and signal-processing routines. The 53 I/O pins permit connection of sensors, buttons, and communication logic alongside the LCD. Using the integrated segmented display controller can reduce external driver complexity. Before layout release, map the exact LCD channels, common-drive connections, and alternate functions from the manufacturer pin and LCD tables for the 64-QFN package.
추천
Battery-Powered Sensor Node
PIC24FJ64GA406-I/MR is suitable for a battery-powered sensor node that wakes periodically, acquires measurements, and transmits compact data. Its XLP eXtreme Low Power family positioning supports energy-conscious operation, while 64KB Flash provides room for drivers and application firmware without an external memory device. The 8KB RAM can buffer acquisition and communication work, and the 106 listed interrupt sources support concurrent timing and peripheral events. Designers should use the manufacturer’s clock, sleep-mode, and peripheral examples to minimize active current. Battery life should be evaluated using the selected sleep mode, sensor duty cycle, radio activity, and display load rather than CPU frequency alone.
추천
Secure Handheld Instrument
The integrated crypto module makes PIC24FJ64GA406-I/MR relevant to handheld instruments that exchange authenticated or protected data. The 16-bit core operates at 32MHz and 16 MIPS, giving enough performance for control loops, display updates, and communication servicing within a compact 64-QFN footprint. A 2.0V to 3.5V supply range supports low-voltage product architectures, while 8KB RAM supports working data and protocol buffers. Firmware designers should partition authentication, secret handling, and update functions around the manufacturer’s cryptographic peripheral documentation. Final security suitability also depends on the selected algorithms, key lifecycle, interface exposure, and the system-level threat model.
추천
Industrial Control Panel
PIC24FJ64GA406-I/MR can serve as the central controller in an industrial control panel containing a segmented display, status indicators, switches, and field-bus interfaces. Its 53 I/O pins provide substantial connection capacity, while the 64KB Flash and 8KB RAM support menu logic, diagnostics, data logging, and protocol handling. The 32MHz core helps service multiple interrupt-driven peripherals without requiring a higher-power processor. Designers should assign pins using the alternate-function matrix and preserve the QFN exposed-pad layout. A hardware revision should also verify logic thresholds, LCD drive configuration, external pull resistors, isolation boundaries, and restart behavior under industrial power transients.
추천
Low-Energy Home Appliance
PIC24FJ64GA406-I/MR is appropriate for compact appliances that combine a small display, buttons, timers, and low-power sensing. The XLP operating focus can help reduce energy consumption during idle periods, while 64KB Flash accommodates control algorithms and user-interface code. The integrated segmented LCD capability is useful for appliances that show status, temperature, timers, or operating modes without deploying a graphical display. A practical design should minimize always-on peripherals, use the manufacturer’s clock configuration carefully, and place external switching noise away from sensitive analog and LCD inputs. Firmware should also account for brownout behavior and safe restart states before appliance production begins.
추천
Data Acquisition and Monitoring System
PIC24FJ64GA406-I/MR can coordinate a compact data-acquisition system that must sample sensors, timestamp events, react to interrupts, and present local information. The 16-bit PIC24F architecture, 32MHz clock, and 16 MIPS throughput support responsive foreground and interrupt-driven routines, while 8KB RAM provides a practical working buffer. With 106 listed interrupt sources and six traps, the controller can manage multiple peripheral events while preserving fault visibility. Designers should validate analog-input topology, reference voltage, sampling timing, and calibration strategy using the manufacturer’s electrical characteristics. The 64-QFN footprint also requires thermal-via and exposed-pad layout compliance to avoid assembly and temperature-rise problems.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ64GA406-I/MR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ64GA406T-I/MR | PIC24FJ64GA106-I/MR | PIC24FJ64GA206-I/MR | PIC24FJ64GA306-I/MR | PIC24FJ64GA106-E/MR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9mm x 9mm) | 64-QFN (9mm x 9mm) | 64-QFN (9mm x 9mm) | 64-QFN (9mm x 9mm) | 64-QFN (9mm x 9mm) | 64-VQFN (9mm x 9mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
주요 차별점
- Combines segmented LCD control with hardware cryptography (vs PIC24FJ64GA106-I/MR)
- Uses the listed 64-QFN 9mm by 9mm package (vs PIC24FJ64GA106-E/MR)
- Delivers 16 MIPS from a 16-bit PIC24F core (vs PIC24FJ64GA206-I/MR)
설계 노트
Use the manufacturer’s 64-QFN land pattern and exposed-pad drawing when placing the device. The QFN body is 9mm by 9mm, but the peripheral pad geometry, thermal-via arrangement, and solder-mask rules determine assembly reliability. Connect the exposed pad as directed by the package documentation rather than treating it as an optional thermal feature. Keep programming and debug access unobstructed so the board can be programmed and inspected without a permanent connection fixture.
The PIC24FJ64GA406-I/MR operates from 2.0V to 3.5V, so power sequencing and brownout behavior deserve explicit review. Place the manufacturer-recommended bypass capacitors close to the supply pins, maintain short return paths, and ensure the upstream source can support startup current without pulling the rail outside its operating limits. For battery systems, evaluate average current using the selected XLP sleep mode, timer wake-ups, analog conversions, display refresh, and communications activity rather than the maximum clock rate alone.
A same-package family member is not automatically a functional replacement. Before substituting PIC24FJ64GA406-I/MR with GA106, GA206, or GA306, compare LCD channel assignments, I/O multiplexing, analog peripheral locations, interrupt vectors, timer channels, clock configuration, programming requirements, and brownout settings. Reuse of the PCB footprint should be followed by firmware and configuration review because a physical fit does not guarantee identical peripheral behavior.
규정 준수 정보
The -I ordering suffix identifies an industrial-grade ordering configuration, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated on the manufacturer product page excerpt.