PIC32MX550F256H-I/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip
料号： PIC32MX550F256H-I/PT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $5.45 | $5.45 |
| 10 | $4.91 | $49.10 |
| 100 | $4.36 | $436.00 |
| 500 | $3.92 | $1,960.00 |
| 1,000 | $3.48 | $3,480.00 |
PIC32MX550F256H-I/PT 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, communication interfaces, ADCs, and GPIO into one package. The PIC32MX family sits within the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. The M4K core provides a 32-bit Harvard architecture with single-cycle multiplication, deterministic interrupts, and DSP-oriented instructions, making it well suited to embedded applications requiring higher computational throughput than 8/16-bit MCUs.
Key features include 256 KB Flash with 32 KB RAM, 16-channel 10-bit ADC at up to 1 Msps, USB 2.0 full-speed On-The-Go (OTG), two I2C, two UART, two I2S, four SPI, six 16-bit timers, five input-capture and five output-compare modules, a Real-Time Clock/Calendar (RTCC) with calendar mode, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The device supports an industrial operating temperature range of -40C to +85C.
Typical applications span audio playback and processing, USB peripherals (HID, CDC, MSD, audio class), HMI panels with graphics and touch, motor control (BLDC/PMSM FOC), industrial sensing, data loggers, and home appliances. The combination of PMP for LCD control, I2S for digital audio streams, CTMU for touch keys, and USB OTG enables single-chip HMI + audio + connectivity products.
When designing with this part, allocate decoupling capacitors near each power pin pair (VDD/VSS and AVDD/AVSS), follow Microchip's recommended ICSP programming footprint, and verify PPS mappings in the Harmony/MPLAB-X configuration tool. For RTCC operation, the 32.768 kHz crystal layout must observe Microchip's oscillator guidelines.
直接替换替代料： PIC32MX550F256H-I/PT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC32MX550F256H-I/PT （相同外形与封装尺寸） ——差异在于 ADC, Package, USB, Parallel Master Port (PMP), CTMU.
快速对比工具——选择替代料号进行并排对比：
PIC32MX550F256H-50I/PT
✅ 直接替换✓ 有现货
$3.05 / 个
查看数据手册 →PIC32MX550F256HT-I/PT
✅ 直接替换📋 参考替代料（不在目录中）
PIC32MX450F256H-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC32MX470F512H-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC32MX550F256H-I/PT 最大额定值与电气特性
| Core | MIPS32 M4K |
| Architecture | 32-bit RISC Harvard |
| Max CPU Speed | 50 MHz / 83 DMIPS |
| Program Memory (Flash) | 256 KB (256K x 8) |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| I/O Pins | 49 (approximate, package dependent) |
| ADC | 10-bit, 16-channel, 1 Msps |
| USB | USB 2.0 Full-Speed OTG |
| SPI | 4 modules |
| I2C | 2 modules |
| UART | 2 modules |
| I2S | 2 modules |
| Timers | 6 x 16-bit |
| 工作温度 | -40 C to +85 C (industrial) |
| 封装 | 64-pin TQFP (10x10 mm) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
PIC32MX550F256H-I/PT 64-pin tqfp (10x10 mm) 引脚配置指南
PIC32MX550F256H-I/PT（64-pin tqfp (10x10 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： PIC32MX550F256H-I/PT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC32MX550F256H-I/PT 适用于 6 应用s: USB Audio Class (UAC) Headset and Speaker Dock, HMI Panel with Graphics and Capacitive Touch, Industrial Sensor Data Logger, BLDC/PMSM Motor Controller, Smart Home Sensor Hub with USB Connectivity, Medical Point-of-Care Diagnostic Instrument.
USB Audio Class (UAC) Headset and Speaker Dock
The PIC32MX550F256H-I/PT is well suited to USB audio applications because it integrates a USB 2.0 Full-Speed On-The-Go controller and two I2S interfaces, enabling a single-chip path from USB audio stream to an external DAC/ADC. According to Microchip application note AN1422, the device supports 16/24/32-bit I2S word widths at sample rates up to 192 kHz, and the integrated USB peripheral supports isochronous endpoints required by UAC1/UAC2 class. With 32 KB of SRAM and DMA-driven I2S buffers, firmware can sustain stereo playback with <30% CPU load on the M4K core running at 50 MHz.
推荐
HMI Panel with Graphics and Capacitive Touch
The PIC32MX550F256H-I/PT targets HMI panels thanks to its Parallel Master Port (PMP) supporting 8/16-bit data width for direct LCD connection, plus the CTMU for capacitive touch sensing. According to the Microchip PIC32MX5xx family datasheet, the PMP operates at up to 25 MHz and supports dual buffers for high-throughput frame updates to STN/CSTN panels up to QVGA. The CTMU measures capacitance with sub-pF resolution, enabling up to 32 touch buttons or a touch overlay without an external touch IC, reducing BOM cost and PCB area in industrial control panels and appliance front panels.
推荐
Industrial Sensor Data Logger
The PIC32MX550F256H-I/PT fits industrial sensor data loggers because of its 16-channel 10-bit ADC at 1 Msps, 32 KB SRAM for time-stamped sample buffering, and USB device mode for log dump to a host PC. Per Microchip AN1279, the ADC supports an automated channel-scan mode that pairs well with DMA, offloading the M4K core to let firmware sustain continuous sampling while USB MSC writes to flash media. The industrial -40C to +85C temperature range and 2.3 V to 3.6 V supply tolerance cover factory-floor deployments.
推荐
BLDC/PMSM Motor Controller
The PIC32MX550F256H-I/PT is suitable for low-to-mid power BLDC and PMSM motor control where its 50 MHz MIPS32 M4K core delivers the throughput required for sensorless FOC algorithms at switching frequencies up to 20 kHz. According to Microchip's motorBench and AN1078 application notes, the device's six 16-bit timers and five output-compare units provide the PWM and edge-capture resources for 3-phase motor control, while the 1 Msps ADC with hardware triggering synchronizes current sampling to the PWM center. For higher-power or higher-FOC-bandwidth designs, migrate to dsPIC33EP or PIC32MK families.
推荐
Smart Home Sensor Hub with USB Connectivity
The PIC32MX550F256H-I/PT serves as a smart-home sensor hub where its USB OTG, multiple UART/SPI ports, and 50 MHz CPU aggregate several wireless or wired sensor interfaces (Zigbee, LoRa, BLE modules, Modbus sensors) and publish data over USB to a home gateway or host PC. The 256 KB Flash accommodates OTA bootloader and application code, while 32 KB SRAM is sufficient for Modbus RTU buffering and JSON serialization. The device operates from 2.3 V to 3.6 V, making it compatible with battery-backed 3.3 V rails in home automation designs.
推荐
Medical Point-of-Care Diagnostic Instrument
The PIC32MX550F256H-I/PT fits portable medical diagnostic instruments because it combines USB device mode for data transfer to a host analyzer, I2S for interfacing precision sensor front-ends, and a low-power Idle/Sleep mode down to 1.1 uA typical. According to the Microchip family datasheet, the CTMU can be used for fluid-level or temperature-compensation measurements in vitro diagnostic cartridges. The -40C to +85C industrial temperature range supports clinical-environment operation, while the 256 KB Flash stores calibration tables and assay-protocol firmware updates.
推荐
推荐产品汇总
工程参考数据： PIC32MX550F256H-I/PT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC32MX550F256H-50I/PT | PIC32MX550F256HT-I/PT | PIC32MX450F256H-I/PT | PIC32MX470F512H-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Core | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit |
| Max CPU Speed | 50 MHz / 83 DMIPS | 50 MHz | 50 MHz | 40 MHz | 120 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 128 KB |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | No USB (PIC32MX450 lacks USB) | USB 2.0 FS OTG |
| I2S Modules | 2 | 2 | 2 | 0 (PIC32MX450 lacks I2S) | 2 |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
关键差异点
- Integrated USB 2.0 FS OTG with internal transceiver （对比 PIC32MX450F256H-I/PT)
- Two I2S interfaces for digital audio （对比 PIC32MX450F256H-I/PT)
- Higher SRAM and Flash ceiling via family migration （对比 PIC32MX470F512H-I/PT)
设计说明
Place a 0.1 uF decoupling capacitor as close as possible to each VDD/VSS pair and a 10 uF bulk capacitor near the device. Per Microchip's PIC32MX hardware design checklist, an additional 0.1 uF is required near AVDD/AVSS for ADC noise rejection. A ferrite bead between digital VDD and analog AVDD is recommended for sensitive analog measurements. Brown-Out Reset (BOR) and POR must be enabled in the configuration bits to ensure deterministic startup.
For the 64-pin TQFP (10x10 mm) layout, follow Microchip's recommended land pattern with 0.5 mm pitch pads and a 1.0 mm via-in-pad allowance for ground thermal vias. Keep the USB D+/D- traces 90-ohm differential, length-matched within 150 mil, and routed over a continuous ground plane. Per Microchip AN588, the 32.768 kHz RTCC crystal should be placed within 200 mil of the SOSCO/SOSCI pins with guard traces.
Do not leave the ICSP/PGD/PGC pins floating - they require external 4.7 kohm pull-ups for reliable in-circuit programming. Disable JTAG in the configuration bits if unused, to free up RA0-RA3 for I/O. Use the PPS module (with unlock sequence OSCCONbits.IOLOCK) to remap peripherals; do not assume default mappings. For USB OTG designs, the VBUS sense pin needs a 10 kohm divider and the ID pin needs the Microchip OTG cable detect circuit.
合规信息
RoHS compliant and lead-free per Microchip product page. Industrial -40C to +85C temperature range; not AEC-Q100 qualified (choose automotive-grade PIC32MK if required).
