PIC32MZ1024ECG100T-I/PF - 200MHz 32-bit MCU, 1MB Flash | Microchip
料号： PIC32MZ1024ECG100T-I/PF ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $9.95 | $9.95 |
| 10 | $9.1 | $91.00 |
| 100 | $8.2 | $820.00 |
| 500 | $7.45 | $3,725.00 |
| 1,000 | $6.75 | $6,750.00 |
PIC32MZ1024ECG100T-I/PF 概述
What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. A 32-bit MCU executes instructions on 32-bit data paths, enabling higher performance than 8-bit or 16-bit MCUs for DSP, graphics, and protocol stacks. Within the taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC.
Key features of the PIC32MZ1024ECG100T-I/PF include 200 MHz CPU core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), dual-panel Flash for live field updates, microMIPS mode for up to 35% code compression, and a 10-bit 500 KSPS 40-channel ADC. On-chip peripherals include Ethernet MAC, CAN, USB, UART, SPI/I2S, I2C, PMP, EBI, SQI, and analog comparators. The MMU supports RTOS deployment and the 5V-tolerant I/Os deliver 32 mA source/sink on selected pins.
The architecture pairs a Harvard-class microAptiv core with tightly coupled SRAM and a multi-channel DMA engine, freeing the CPU from peripheral data movement. A Memory Management Unit enables full embedded OS execution. The Class B Safety Library (IEC 60730) and backup internal oscillator support functional-safety designs and fail-safe operation, while hardware crypto and true random number generation accelerate secure-connected designs.
Typical applications include industrial Ethernet gateways, HMI touch panels, motor-control BLDC/PMSM drives, IoT edge nodes, audio processing, and high-speed connectivity bridges. The wide peripheral set also makes the device suitable for medical monitoring equipment and graphics-rich consumer appliances.
When designing with this MCU, allocate PCB area for the 14x14 mm TQFP land pattern, follow Microchip's decoupling and trace-impedance guidance for Ethernet and USB, and use the dual-panel Flash feature for OTA-friendly firmware updates.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that supplement the manufacturer datasheet to accelerate component selection.
直接替换替代料： PIC32MZ1024ECG100T-I/PF ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC32MZ1024ECG100T-I/PF （相同外形与封装尺寸） ——差异在于 ADC, Package, Core Architecture, Ethernet, USB.
快速对比工具——选择替代料号进行并排对比：
PIC32MZ1024ECG100-I/PF
✅ 直接替换✓ 有现货
$9.57 / 个
查看数据手册 →PIC32MZ1024ECG100T-I/PT
✅ 直接替换📋 参考替代料（不在目录中）
PIC32MZ1024ECG100-I/PT
✅ 直接替换✓ 有现货
$11.62 / 个
查看数据手册 →PIC32MZ0512EFK100T-I/PF
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC32MZ0512EFK100-I/PF
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.79 / 个
查看数据手册 →PIC32MZ1024ECG100T-I/PF 最大额定值与电气特性
| Core Architecture | MIPS32 microAptiv (32-bit) |
| CPU Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Flash Memory | 1 MB (1M x 8) |
| Data SRAM | 512 KB |
| 封装 | 100-pin TQFP (14x14 mm) |
| 电源电压 | 3.3 V (typical) |
| 工作温度 | -40C to +85C (industrial) |
| ADC | 10-bit, 500 KSPS, 40 channels |
| I/O Voltage Tolerance | 5V-tolerant, 32 mA source/sink |
| Communication Peripherals | Ethernet, CAN, USB, UART, SPI/I2S, I2C, PMP, EBI, SQI |
| DSP Features | 4x 64-bit accumulators, single-cycle MAC, saturating & fractional math |
| Code Compression | microMIPS mode (up to 35% smaller code) |
| Flash Architecture | Dual-panel Flash for live update support |
| MMU | Yes (embedded OS support) |
| Safety Library | IEC 60730 Class B |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
PIC32MZ1024ECG100T-I/PF 100-pin tqfp (14x14 mm) 引脚配置指南
PIC32MZ1024ECG100T-I/PF（100-pin tqfp (14x14 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： PIC32MZ1024ECG100T-I/PF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC32MZ1024ECG100T-I/PF 适用于 6 应用s: Industrial Ethernet Gateway, HMI Touch Panel Controller, Motor Control BLDC/PMSM Drive, IoT Edge Node with Security, Audio Processing and Codec Interface, Medical Monitoring Equipment.
Industrial Ethernet Gateway
The PIC32MZ1024ECG100T-I/PF is purpose-built for industrial Ethernet gateways because its 200 MHz MIPS32 microAptiv core delivers 330 DMIPS, sufficient to run real-time protocol stacks such as EtherNet/IP, PROFINET, or Modbus TCP while leaving CPU headroom for application logic. The integrated Ethernet MAC combined with 512 KB SRAM buffers network packets without external memory, while the 1 MB dual-panel Flash supports live OTA firmware updates. CAN peripherals enable bridge connectivity to legacy industrial fieldbuses. The -40C to +85C industrial temperature grade and IEC 60730 Class B Safety Library suit harsh factory environments where reliable operation and functional safety are mandatory.
推荐
HMI Touch Panel Controller
For HMI touch panel designs, the PIC32MZ1024ECG100T-I/PF provides the computational throughput and peripheral set required to drive LCD touch interfaces. The parallel master port (PMP) connects directly to TFT displays, while the SPI/I2S interfaces support capacitive touch controllers. DSP enhancements (four 64-bit accumulators, single-cycle MAC) accelerate graphics rendering and touch gesture processing. The 10-bit 500 KSPS ADC handles backlight dimming and temperature monitoring. The 100-pin TQFP exposes sufficient I/O for display data plus SPI-based touch and audio paths simultaneously, eliminating the need for an external graphics controller.
推荐
Motor Control BLDC/PMSM Drive
The PIC32MZ1024ECG100T-I/PF fits BLDC and PMSM motor control because the microAptiv core's DSP extensions (single-cycle MAC, saturating arithmetic) execute field-oriented control (FOC) algorithms within microsecond-level control loops. Six PWM outputs drive three-phase inverter stages, while the 40-channel 500 KSPS ADC samples phase currents and back-EMF signals with deterministic latency. microMIPS compression shrinks FOC lookup tables and PI-controller code, leaving 1 MB Flash headroom for application-layer features. Industrial temperature rating and IEC 60730 compliance support appliance and industrial drive deployments requiring safety certifications.
推荐
IoT Edge Node with Security
In IoT edge nodes, the PIC32MZ1024ECG100T-I/PF combines Ethernet/Wi-Fi-ready peripherals, 1 MB Flash for TLS stacks and application code, and 512 KB SRAM for packet buffers and RTOS workspaces. The hardware crypto engine and true random number generator accelerate TLS 1.3 handshakes without burdening the CPU. The dual-panel Flash supports A/B OTA updates, allowing secure field upgrades. microMIPS compression shrinks networking libraries by up to 35%, extending battery life in low-duty-cycle deployments. The MMU supports running NuttX or FreeRTOS with memory protection.
推荐
Audio Processing and Codec Interface
Audio processing applications benefit from the PIC32MZ1024ECG100T-I/PF's I2S interface, which connects directly to external audio codecs and DACs. The DSP extensions perform real-time audio effects, EQ, and mixing at 48 kHz sample rates with negligible CPU loading. The 200 MHz core supports software codecs like Opus or AAC for streaming applications. The 10-bit ADC handles analog microphone inputs while PWM outputs drive Class D amplifier stages. Industrial temperature grade enables automotive infotainment and pro-audio equipment designs.
推荐
Medical Monitoring Equipment
Medical monitoring devices leverage the PIC32MZ1024ECG100T-I/PF's DSP performance for biosignal processing such as ECG filtering, pulse-oximetry analysis, and respiration detection. The 10-bit 500 KSPS ADC captures multiple sensor channels simultaneously, while DSP extensions run FFT and digital filters in real time. The IEC 60730 Class B Safety Library provides diagnostic coverage for patient-adjacent equipment. Ethernet connectivity enables HL7 data transmission to hospital networks. The wide operating temperature range supports portable and bedside monitoring applications.
推荐
推荐产品汇总
工程参考数据： PIC32MZ1024ECG100T-I/PF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC32MZ1024ECG100-I/PF | PIC32MZ1024ECG100T-I/PT | PIC32MZ1024ECG100-I/PT | PIC32MZ0512EFK100T-I/PF | PIC32MZ0512EFK100-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (14x14 mm) | 100-pin TQFP (14x14 mm) - same | 100-pin TQFP (12x12 mm) - smaller | 100-pin TQFP (12x12 mm) - smaller | 100-pin TQFP (14x14 mm) - same | 100-pin TQFP (14x14 mm) - same |
| CPU Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz | 252 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 512 KB | 512 KB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Ethernet MAC | Yes | Yes | Yes | Yes | Yes | Yes |
| Family | PIC32MZ EC | PIC32MZ EC | PIC32MZ EC | PIC32MZ EC | PIC32MZ EF | PIC32MZ EF |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
关键差异点
- Same 14x14 mm TQFP-100 footprint as the non-T/R variant for design reuse （对比 PIC32MZ1024ECG100T-I/PT (12x12 mm PT package))
- 1 MB Flash vs 512 KB in EF family base part at same pin count （对比 PIC32MZ0512EFK100T-I/PF (EF family))
- Tape and reel packaging for high-volume manufacturing （对比 PIC32MZ1024ECG100-I/PF (tray packaging))
设计说明
Place decoupling capacitors (100 nF ceramic plus 4.7 uF bulk) within 2 mm of each VDD/VDDIO pin pair on the 100-pin TQFP. Use a continuous ground plane under the IC and stitch vias around the perimeter to reduce EMI. Route Ethernet differential pairs (RMII) with 50 ohm characteristic impedance, matched length within 50 mils. The 14x14 mm TQFP land pattern requires 0.5 mm pitch traces with 0.2-0.25 mm via-in-pad design recommended for BGA escape routing.
At 200 MHz operation with full peripheral activity, the PIC32MZ1024ECG100T-I/PF dissipates approximately 0.5-1 W depending on I/O toggling. The 100-pin TQFP has a theta_JA around 30-35 C/W on a standard 4-layer JEDEC test board. At 85C ambient, junction temperature stays well below the 125C limit, but for sustained full-load operation in sealed enclosures, add thermal vias under the exposed pad or a small copper pour. Industrial temperature parts are rated to 85C ambient.
Do not confuse the TQFP-100 14x14 mm PF package with the 12x12 mm PT package - the PCB land patterns differ and are not interchangeable. Ensure VDD and VDDIO decoupling caps match datasheet recommendations exactly to avoid MCU reset under load. When using dual-panel Flash for live updates, follow Microchip's bootloader sequence to prevent bricking during partial writes. Enable the watchdog timer in safety-critical applications.
合规信息
RoHS compliant per Microchip product page. Industrial temperature grade -40C to +85C. IEC 60730 Class B Safety Library included. Not AEC-Q100 qualified - this is an industrial/consumer part, not automotive grade.
