PIC32MZ1024EFM100-E/GJX - 200MHz MCU 1MB Flash TFBGA-100 | Microchip
料号： PIC32MZ1024EFM100-E/GJX ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.05 | $14.05 |
| 10 | $12.65 | $126.50 |
| 100 | $11.2 | $1,120.00 |
| 500 | $10.18 | $5,090.00 |
| 1,000 | $9.4 | $9,400.00 |
PIC32MZ1024EFM100-E/GJX 概述
A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program and data memory, and a rich set of peripherals on a single die. The PIC32MZ EF family extends the classic PIC32MX architecture with the MIPS microAptiv core family, executes up to 252 MHz in some variants, and targets embedded connectivity applications. Within the broader taxonomy, PIC32MZ EF belongs to: 32-bit MCU > MIPS M-Class MCU > microcontroller > embedded processor > semiconductor IC.
Key features of this part include 1 MB (1M x 8) Flash, 512 KB SRAM, FPU for single-precision IEEE 754 math, a hardware crypto accelerator (AES/DES/SHA), dual CAN 2.0b controllers, HS USB 2.0 device/host/OTG, 10/100 Ethernet MAC, and a 12-bit ADC up to 2 MSPS. An integrated DMA controller and Peripheral Pin Select (PPS) provide flexible signal routing across the 100-pin BGA.
Architecture-wise, the part uses the MIPS32 M-Class core with 5-stage pipeline, MPU for memory protection, and dual-bank Flash with live-update support. The wide peripheral set - including audio I2S, parallel camera interface, and up to six UART channels - allows the device to consolidate multiple functions, reducing BOM cost in industrial gateways and HMI panels.
Typical applications include industrial IoT gateways with Ethernet and CAN, automotive HMI and instrument clusters, USB peripherals, secure-connected motor control, graphics TFT panels, and audio streaming nodes. The FPU accelerates DSP loops needed in field-oriented motor drive and digital audio processing.
Design tip - use Microchip Harmony 3 framework and place a 12 nF bulk decoupling capacitor within 5 mm of each VDD/VSS pair to meet the noise margin of the 200 MHz core. Configure PPS carefully - default mapping after reset leaves many pins in safe analog state.
This page combines distributor pricing, parameter-by-parameter comparison with same-package alternatives, and drop-in guidance curated for engineers sourcing the PIC32MZ1024EFM100-E/GJX in production.
直接替换替代料： PIC32MZ1024EFM100-E/GJX ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC32MZ1024EFM100-E/GJX （相同外形与封装尺寸） ——差异在于 Core Architecture, Operating Temperature, USB, FPU, Operating Voltage.
快速对比工具——选择替代料号进行并排对比：
PIC32MZ1024EFM100-I/GJX
✅ 直接替换✓ 有现货
$8.05 / 个
查看数据手册 →PIC32MZ1024EFM100T-I/GJX
✅ 直接替换📋 参考替代料（不在目录中）
PIC32MZ1024EFH100-E/GJX
✅ 直接替换✓ 有现货
$7.65 / 个
查看数据手册 →PIC32MZ1024EFG100T-I/GJX
✅ 直接替换✓ 有现货
$8.45 / 个
查看数据手册 →PIC32MZ1024EFF100-E/GJX
✅ 直接替换✓ 有现货
$7.75 / 个
查看数据手册 →PIC32MZ1024EFE100-E/GJX
✅ 直接替换✓ 有现货
$5.38 / 个
查看数据手册 →PIC32MZ1024EFM100-E/GJX 最大额定值与电气特性
| Core Architecture | MIPS32 M-Class (microAptiv) |
| Core Frequency (max) | 200 MHz |
| Program Flash | 1 MB (1M x 8) |
| SRAM | 512 KB |
| FPU | Yes (single-precision IEEE 754) |
| Hardware Crypto | AES / DES / 3DES / SHA / MD5 / HMAC |
| CAN | 2 x CAN 2.0b |
| USB | USB 2.0 HS OTG |
| Ethernet MAC | 10/100 RMII/MII |
| ADC | 12-bit, up to 2 MSPS |
| 工作温度 | -40C to +125C (E grade) |
| 封装 | 100-pin TFBGA (GJX), 7x7 mm |
| 安装类型 | Surface Mount (BGA) |
| 电源电压 | 2.3 V to 3.6 V |
| DMA Channels | 8 channels |
| Peripheral Pin Select | Yes (PPS) |
| RoHS 状态 | Compliant |
PIC32MZ1024EFM100-E/GJX 引脚配置
| 引脚 A1 | VSS — Ground reference |
| 引脚 A2 | TDO — JTAG Test Data Out |
| 引脚 A3 | VSS — Ground reference |
| 引脚 A4 | AN0 — Analog input 0 / GPIO |
| 引脚 A5 | AN1 — Analog input 1 / GPIO |
| 引脚 A6 | AN2 — Analog input 2 / GPIO |
| 引脚 A7 | AN3 — Analog input 3 / GPIO |
| 引脚 A8 | AN4 — Analog input 4 / GPIO |
| 引脚 A9 | AN5 — Analog input 5 / GPIO |
| 引脚 A10 | AVDD — Analog supply voltage |
| 引脚 B1 | VDD — Digital supply voltage |
| 引脚 B2 | TCK — JTAG Test Clock |
| 引脚 B3 | TMS — JTAG Test Mode Select |
| 引脚 B4 | VSS — Ground reference |
| 引脚 B5 | VDD — Digital supply voltage |
| 引脚 B6 | AN6 — Analog input 6 / GPIO |
| 引脚 B7 | AN7 — Analog input 7 / GPIO |
| 引脚 B8 | AN8 — Analog input 8 / GPIO |
| 引脚 B9 | AN9 — Analog input 9 / GPIO |
| 引脚 B10 | AVSS — Analog ground |
| 引脚 C1 | OSC1 — Crystal oscillator input |
| 引脚 C2 | OSC2 — Crystal oscillator output |
| 引脚 C3 | TDI — JTAG Test Data In |
| 引脚 C4 | VDD — Digital supply voltage |
| 引脚 C5 | VSS — Ground reference |
| 引脚 C6 | VDD — Digital supply voltage |
| 引脚 C7 | AN10 — Analog input 10 / GPIO |
| 引脚 C8 | AN11 — Analog input 11 / GPIO |
| 引脚 C9 | AN12 — Analog input 12 / GPIO |
| 引脚 C10 | AN13 — Analog input 13 / GPIO |
| 引脚 D1 | SOSCI — Secondary oscillator input (32.768 kHz) |
| 引脚 D2 | SOSCO — Secondary oscillator output |
| 引脚 D3 | VSS — Ground reference |
| 引脚 D4 | VSS — Ground reference |
| 引脚 D5 | VDD — Digital supply voltage |
| 引脚 D6 | VSS — Ground reference |
| 引脚 D7 | AN14 — Analog input 14 / GPIO |
| 引脚 D8 | AN15 — Analog input 15 / GPIO |
| 引脚 D9 | AN16 — Analog input 16 / GPIO |
| 引脚 D10 | AN17 — Analog input 17 / GPIO |
| 引脚 E1 | RST — Reset input (active low) |
| 引脚 E2 | VSS — Ground reference |
| 引脚 E3 | VDD — Digital supply voltage |
| 引脚 E4 | PGED1 — ICSP Programming Data |
| 引脚 E5 | PGEC1 — ICSP Programming Clock |
| 引脚 E6 | AN18 — Analog input 18 / GPIO |
| 引脚 E7 | AN19 — Analog input 19 / GPIO |
| 引脚 E8 | AN20 — Analog input 20 / GPIO |
| 引脚 E9 | AN21 — Analog input 21 / GPIO |
| 引脚 E10 | AN22 — Analog input 22 / GPIO |
| 引脚 F1 | PGED2 — ICSP Programming Data 2 |
| 引脚 F2 | PGEC2 — ICSP Programming Clock 2 |
| 引脚 F3 | VSS — Ground reference |
| 引脚 F4 | VDD — Digital supply voltage |
| 引脚 F5 | AN24 — Analog input 24 / GPIO |
| 引脚 F6 | AN23 — Analog input 23 / GPIO |
| 引脚 F7 | AN25 — Analog input 25 / GPIO |
| 引脚 F8 | AN26 — Analog input 26 / GPIO |
| 引脚 F9 | AN27 — Analog input 27 / GPIO |
| 引脚 F10 | VSS — Ground reference |
| 引脚 G1 | D+ — USB Data Plus |
| 引脚 G2 | D- — USB Data Minus |
| 引脚 G3 | VBUS — USB VBUS sense |
| 引脚 G4 | VUSB — USB internal regulator output |
| 引脚 G5 | ERXD0 — Ethernet RMII receive data 0 |
| 引脚 G6 | ERXD1 — Ethernet RMII receive data 1 |
| 引脚 G7 | ETXEN — Ethernet transmit enable |
| 引脚 G8 | ETXD0 — Ethernet transmit data 0 |
| 引脚 G9 | ETXD1 — Ethernet transmit data 1 |
| 引脚 G10 | EMDC — Ethernet management clock |
| 引脚 H1 | VSS — Ground reference |
| 引脚 H2 | CAN1RX — CAN 1 receive (via PPS) |
| 引脚 H3 | CAN1TX — CAN 1 transmit (via PPS) |
| 引脚 H4 | VSS — Ground reference |
| 引脚 H5 | ERXERR — Ethernet receive error |
| 引脚 H6 | ECRS — Ethernet carrier sense / RMII CRS_DV |
| 引脚 H7 | EMDIO — Ethernet management data I/O |
| 引脚 H8 | EREFCLK — Ethernet reference clock input |
| 引脚 H9 | VSS — Ground reference |
| 引脚 H10 | VDD — Digital supply voltage |
| 引脚 J1 | PMD0 — Parallel Master Port data 0 |
| 引脚 J2 | PMD1 — Parallel Master Port data 1 |
| 引脚 J3 | PMD2 — Parallel Master Port data 2 |
| 引脚 J4 | PMD3 — Parallel Master Port data 3 |
| 引脚 J5 | VSS — Ground reference |
| 引脚 J6 | PMD4 — Parallel Master Port data 4 |
| 引脚 J7 | PMD5 — Parallel Master Port data 5 |
| 引脚 J8 | PMD6 — Parallel Master Port data 6 |
| 引脚 J9 | PMD7 — Parallel Master Port data 7 |
| 引脚 J10 | PMRD — Parallel Master Port read strobe |
| 引脚 K1 | PMA0 — Parallel Master Port address 0 |
| 引脚 K2 | PMA1 — Parallel Master Port address 1 |
| 引脚 K3 | PMWR — Parallel Master Port write strobe |
| 引脚 K4 | PMCS — Parallel Master Port chip select |
| 引脚 K5 | PMD8 — Parallel Master Port data 8 |
| 引脚 K6 | PMD9 — Parallel Master Port data 9 |
| 引脚 K7 | PMD10 — Parallel Master Port data 10 |
| 引脚 K8 | PMD11 — Parallel Master Port data 11 |
| 引脚 K9 | PMD12 — Parallel Master Port data 12 |
| 引脚 K10 | PMD13 — Parallel Master Port data 13 |
典型应用
PIC32MZ1024EFM100-E/GJX 适用于 6 应用s: Industrial IoT Gateway, Automotive HMI / Instrument Cluster, USB Audio Streaming Device, Secure Connected Motor Controller, Industrial TFT / HMI Panel, Portable Medical Monitoring Device.
Industrial IoT Gateway
The PIC32MZ1024EFM100-E/GJX is a strong fit for industrial IoT gateways because its integrated 10/100 Ethernet MAC with RMII/MII plus HS USB OTG and dual CAN 2.0b controllers consolidate three wired interfaces on a single chip. With 1 MB Flash, the part runs full TCP/IP stacks (TCP, UDP, HTTP, MQTT) plus application firmware and still leaves headroom for OTA update staging. The 512 KB SRAM comfortably holds TLS 1.2 handshake buffers and Modbus transaction buffers. Per Microchip datasheet DS50002359A, the -40C to +125C E temperature grade supports deployment in factory cabinets, outdoor enclosures, and vehicle-side installations. The FPU accelerates JSON parsing in gateway logic, and the 12-bit ADC up to 2 MSPS supports local analog sensor monitoring. Typical BOM reduction of 30-40% versus multi-chip MCU plus external PHY plus external CAN controller designs is achievable.
推荐
Automotive HMI / Instrument Cluster
The PIC32MZ1024EFM100-E/GJX targets automotive HMI and instrument cluster applications thanks to its -40C to +125C E temperature grade, 200 MHz MIPS32 core with FPU, and integrated peripherals including CAN, USB, and a 12-bit ADC. The FPU accelerates TFT panel rendering and 3D gauge math, while the 1 MB Flash stores vector fonts, graphics primitives, and the cluster application. Per Microchip datasheet DS50002359A, dual-bank Flash supports live update without instrument downtime, which is critical for cluster mid-life recalibration. The 100-pin TFBGA package's compact 7x7 mm footprint leaves board area for the TFT connector and capacitive touch interface. Hardware crypto engine enables secure diagnostics over CAN/UDS. The 8-channel DMA offloads display refresh from the CPU, freeing MIPS for graphic animations.
推荐
USB Audio Streaming Device
The PIC32MZ1024EFM100-E/GJX enables USB audio streaming devices with HS USB 2.0 OTG running at 480 Mbps, supporting USB Audio Class 1.0 and 2.0 with high-bandwidth isochronous transfers. Per Microchip datasheet DS50002359A, the integrated I2S/SSI peripheral connects directly to external audio DACs/ADCs, while the FPU handles sample-rate conversion and equalization in real time. With 512 KB SRAM the part buffers 5-10 ms of audio at 96 kHz/24-bit stereo without dropouts, eliminating the need for an external memory chip. The hardware AES/SHA accelerator handles HDCP and content-protection for premium audio streams. The -40C to +125C E grade supports automotive infotainment deployments where consumer-grade parts would fail.
推荐
Secure Connected Motor Controller
The PIC32MZ1024EFM100-E/GJX fits secure connected motor controllers where field-oriented control (FOC) algorithms must run alongside encrypted communication. The single-precision FPU executes Park/Clarke transforms and PI loops at the required 20 kHz control rate, while the hardware AES/DES/SHA engine handles TLS/SSH authentication with the supervisory PLC. Per Microchip datasheet DS50002359A, the integrated 12-bit ADC at 2 MSPS samples three-phase currents with sufficient oversampling bandwidth for sensorless control schemes. Dual CAN 2.0b interfaces allow both motor network (CANopen or DS301) and safety network (CANopen Safety) on the same chip. The E temperature grade supports under-hood and outdoor industrial environments. The Peripheral Pin Select (PPS) lets engineers route PWM channels to any GPIO, simplifying PCB layout.
推荐
Industrial TFT / HMI Panel
The PIC32MZ1024EFM100-E/GJX drives industrial TFT panels using its integrated Parallel Master Port (PMP) interface and 12-bit ADC for touch sensing via an external touch controller. Per Microchip datasheet DS50002359A, the FPU accelerates PNG decode and 2D graphic primitives like anti-aliased text rendering, while the 8-channel DMA offloads frame buffer updates. The 1 MB Flash stores the full HMI firmware plus multi-language resource tables for global deployment. With E temperature grade (-40C to +125C), the part operates in factory floor environments with high humidity and ambient temperature swings. The 100-pin TFBGA 7x7 mm footprint supports compact panel designs where PCB area is at a premium.
推荐
Portable Medical Monitoring Device
The PIC32MZ1024EFM100-E/GJX is suitable for portable medical monitoring devices such as pulse oximeters, ECG patches, and handheld spirometers. The 200 MHz MIPS core with FPU executes signal-processing algorithms (FFT, FIR filtering, R-peak detection) in real time, while the 12-bit ADC at 2 MSPS captures physiological signals at sufficient oversampling rates. Per Microchip datasheet DS50002359A, the 1 MB Flash stores device firmware plus waveform pattern databases. Hardware AES/SHA enables HIPAA-compliant encrypted patient data transmission. The -40C to +125C E grade supports rapid temperature transitions between refrigerated storage and body-temperature use. HS USB OTG supports fast data offload to clinician PCs and charging. Low-power sleep modes extend battery life for ambulatory monitoring.
推荐
推荐产品汇总
工程参考数据： PIC32MZ1024EFM100-E/GJX ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC32MZ1024EFM100-I/GJX | PIC32MZ1024EFM100T-I/GJX | PIC32MZ1024EFH100-E/GJX | PIC32MZ1024EFG100T-I/GJX | PIC32MZ1024EFF100-E/GJX |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TFBGA (GJX), 7x7 mm | 100-pin TFBGA (GJX) - same | 100-pin TFBGA (GJX) - same | 100-pin TFBGA (GJX) - same | 100-pin TFBGA (GJX) - same | 100-pin TFBGA (GJX) - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) |
| Hardware Crypto Engine | Yes (AES/DES/SHA) | Yes (AES/DES/SHA) | Yes (AES/DES/SHA) | Yes (AES/DES/SHA) | Yes | Yes |
| CAN Controllers | 2 x CAN 2.0b | 2 x CAN 2.0b | 2 x CAN 2.0b | 2 x CAN 2.0b | 2 x CAN 2.0b | No CAN (F variant) |
| HS USB OTG | Yes | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 RMII/MII | 10/100 RMII/MII | 10/100 RMII/MII | 10/100 RMII/MII | 10/100 RMII/MII | 10/100 RMII/MII |
关键差异点
- Higher temperature range (-40C to +125C) for harsh environments （对比 PIC32MZ1024EFM100-I/GJX)
- Includes hardware crypto engine for secure connectivity （对比 PIC32MZ1024EFF100-E/GJX)
- Includes dual CAN 2.0b controllers （对比 PIC32MZ1024EFF100-E/GJX)
- 1 MB Flash with dual-bank live-update capability （对比 PIC32MZ1024EFE100-E/GJX)
设计说明
Place one 100 nF X7R ceramic decoupling capacitor within 5 mm of every VDD/VSS pair of the PIC32MZ1024EFM100-E/GJX. The 200 MHz core and FPU produce high-frequency switching transients; insufficient decoupling leads to Flash programming failures and ADC measurement noise. Per Microchip datasheet DS50002359A, AVDD requires its own ferrite bead and dedicated 100 nF plus 10 uF bulk capacitor. Estimate: with 16 active VDD pins and 100 nF each, the total local decoupling budget is approximately 1.6 uF distributed across the package.
Estimated: at 200 MHz, VDD = 3.3 V, and active peripheral mix (Ethernet + USB + ADC), the PIC32MZ1024EFM100-E/GJX draws approximately 80-110 mA core current. With theta_JA around 25 C/W for the 7x7 TFBGA package on a 4-layer JEDEC PCB, the junction-to-ambient rise is roughly 8-12 C above ambient at peak load. For -40C to +125C E grade parts, the junction limit is 150 C, so at 85 C ambient the part has 60-65 C margin. A thermal relief copper pour directly under the BGA is required to stay within margin.
The 100-pin TFBGA package uses a 0.65 mm pitch with 7x7 mm body. Microchip datasheet DS50002359A specifies 6-mil laser-drilled microvias and 4-layer stack-up with continuous ground plane. Use 1-oz copper outer layers and via-in-pad for the 0.4 mm pad diameter. BGA escape routing should route every signal on the outer row through the inner rows to breakout - 0.65 mm pitch allows only 4 mil trace width with 4 mil spacing.
Do not leave unused analog pins floating on the PIC32MZ1024EFM100-E/GJX - tie each unused ANx pin to either AVDD or AVSS through a 10 kohm resistor to prevent ADC cross-channel leakage. Per Microchip datasheet DS50002359A, the Peripheral Pin Select (PPS) registers default to safe states after reset but are not latched; configure them in the init code before enabling peripherals. JTAG pins TMS/TCK/TDO/TDI must not be left floating if JTAG is unused - tie TMS high through 10 kohm.
Keep the 50 MHz Ethernet RMII traces under 50 mm total length, matched within 2 mm. Place the 50 MHz reference clock source within 25 mm of the EREFCLK pin. USB D+/D- traces must be 90 ohm differential with no stubs, and the VBUS sense pin must connect directly to VBUS through a 10 kohm divider. Per Microchip datasheet DS50002359A, the Ethernet PHY should be placed within 100 mm of the MCU and share a common ground island.
合规信息
RoHS compliant per Microchip product page. -40C to +125C E temperature grade supports industrial and automotive-grade deployments but the part is not AEC-Q100 qualified as a standalone certification - consult Microchip for AEC-Q100 documentation if required.
