PIC32MZ2025DAS176-V/2J - 32-bit MCU 200MHz 2MB Flash | Microchip
料号： PIC32MZ2025DAS176-V/2J ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $13.96 | $13.96 |
| 10 | $12.85 | $128.50 |
| 100 | $11.74 | $1,174.00 |
| 500 | $10.62 | $5,310.00 |
| 1,000 | $10.03 | $10,030.00 |
PIC32MZ2025DAS176-V/2J 概述
A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC32 family belongs to the MIPS32 microAptiv architecture family and is positioned at the high end of Microchip's 32-bit MCU portfolio, aimed at applications where traditional microcontrollers run out of performance and engineers want to avoid migrating to a full microprocessor with external memory and PMIC. Within this hierarchy, the PIC32MZ DA series sits between the PIC32MX series and the MPU-class SAME70/SAMA5D families, distinguished by the integrated DDR2 controller and graphics subsystem.
Key features include 2 MB of Flash with live update support, 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, Hi-Speed USB, and an integrated 32-bit DDR2 memory interface that simplifies board layout by stacking DRAM directly on-package in BGA-176 variants. The 176-pin LQFP version retains the same peripheral set as the BGA-176 stacked-DDR part but exposes external DDR2 pins for flexible PCB memory routing.
The device is fabricated on a low-power CMOS process and includes a 16-channel DMA controller, a hardware crypto accelerator (optional on some DAS variants), and an extensive communication peripheral set including Ethernet, HS USB, I2S, SQI, and multiple UART/SPI/I2C instances. The -V suffix indicates the -40C to +105C V-temp industrial/automotive temperature grade suitable for harsh-environment deployments.
Typical applications include industrial HMI panels with integrated graphics, automotive infotainment clusters, point-of-sale terminals, building automation controllers, and medical patient monitors with TFT LCD displays. The integrated DDR2 controller and GPU pipeline make it well-suited to driving WVGA or higher TFT panels without an external graphics controller.
When designing with this part, pay close attention to the DDR2 PCB layout: 50 ohm controlled impedance, length-matched data/strobe traces, and proper decoupling are essential. The 176-pin LQFP at 0.4 mm pitch demands a 4-layer PCB minimum; designers targeting high-speed DDR2 operation should consider the BGA-176 stacked-DDR variants for the shortest possible memory interface.
直接替换替代料： PIC32MZ2025DAS176-V/2J ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC32MZ2025DAS176-V/2J （相同外形与封装尺寸） ——差异在于 Graphics Controller, Core Architecture, Operating Temperature, Package, USB.
快速对比工具——选择替代料号进行并排对比：
PIC32MZ2025DAS176T-V/2J
✅ 直接替换📋 参考替代料（不在目录中）
PIC32MZ2025DAL176-I/2J
✅ 直接替换✓ 有现货
$6.95 / 个
查看数据手册 →PIC32MZ2025DAK176-V/2J
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$12.1 / 个
查看数据手册 →PIC32MZ2025DAH176-I/2J
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$4.83 / 个
查看数据手册 →PIC32MZ2025DAG176-I/2J
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$11.2 / 个
查看数据手册 →PIC32MZ2025DAK176T-V/2J
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$9.98 / 个
查看数据手册 →PIC32MZ2025DAS176-V/2J 最大额定值与电气特性
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| CPU Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Program Flash Memory | 2 MB (2M x 8) |
| SRAM | 640 KB |
| DDR2 Controller | Integrated, 16-bit, up to 128 MB addressable |
| Graphics Controller | Integrated with dedicated GPU |
| ADC | 12-bit, up to 18 MSPS, up to 45 analog inputs |
| USB | Hi-Speed USB 2.0 |
| CAN Modules | 2 (CAN 2.0B) |
| 封装 | 176-pin LQFP (20x20 mm, 0.4 mm pitch) |
| 工作温度 | -40C to +105C (V-temp grade) |
| 电源电压 | 2.3 V to 3.6 V (core and I/O) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
| AEC-Q100 | Not qualified (V-temp industrial/automotive grade, not full Q100) |
PIC32MZ2025DAS176-V/2J 引脚配置
| 引脚 1 | VDD — Core/IO supply voltage 2.3V-3.6V |
| 引脚 2 | OSC1 — External crystal oscillator input |
| 引脚 3 | OSC2 — External crystal oscillator output |
| 引脚 4 | VDD — Core/IO supply voltage |
| 引脚 5 | VSS — Ground |
| 引脚 6 | MCLR — Master clear reset, active low |
| 引脚 7 | PGEC1 — ICSP clock channel 1 |
| 引脚 8 | PGED1 — ICSP data channel 1 |
| 引脚 9 | VSS — Ground |
| 引脚 10 | VDD — Core/IO supply voltage |
| 引脚 11 | RB0 — GPIO RB0 / programming |
| 引脚 12 | RB1 — GPIO RB1 |
| 引脚 13 | RB2 — GPIO RB2 |
| 引脚 14 | RB3 — GPIO RB3 |
| 引脚 15 | RB4 — GPIO RB4 / SDA1 alt |
| 引脚 16 | RB5 — GPIO RB5 / SCL1 alt |
| 引脚 17 | RB6 — GPIO RB6 / ICD PGEC2 alt |
| 引脚 18 | RB7 — GPIO RB7 / ICD PGED2 alt |
| 引脚 19 | VSS — Ground |
| 引脚 20 | VDD — Core/IO supply voltage |
| 引脚 21 | RB8 — GPIO RB8 |
| 引脚 22 | RB9 — GPIO RB9 |
| 引脚 23 | RB10 — GPIO RB10 |
| 引脚 24 | RB11 — GPIO RB11 |
| 引脚 25 | RB12 — GPIO RB12 |
| 引脚 26 | RB13 — GPIO RB13 |
| 引脚 27 | RB14 — GPIO RB14 |
| 引脚 28 | RB15 — GPIO RB15 |
| 引脚 29 | VSS — Ground |
| 引脚 30 | VDD — Core/IO supply voltage |
| 引脚 31 | RC0 — GPIO RC0 |
| 引脚 32 | RC1 — GPIO RC1 |
| 引脚 33 | RC2 — GPIO RC2 |
| 引脚 34 | RC3 — GPIO RC3 |
| 引脚 35 | RC4 — GPIO RC4 |
| 引脚 36 | RC5 — GPIO RC5 |
| 引脚 37 | RC6 — GPIO RC6 |
| 引脚 38 | RC7 — GPIO RC7 |
| 引脚 39 | VSS — Ground |
| 引脚 40 | VDD — Core/IO supply voltage |
| 引脚 41 | RC8 — GPIO RC8 |
| 引脚 42 | RC9 — GPIO RC9 |
| 引脚 43 | RC10 — GPIO RC10 |
| 引脚 44 | RC11 — GPIO RC11 |
| 引脚 45 | RC12 — GPIO RC12 |
| 引脚 46 | RC13 — GPIO RC13 |
| 引脚 47 | RC14 — GPIO RC14 |
| 引脚 48 | RC15 — GPIO RC15 |
| 引脚 49 | VSS — Ground |
| 引脚 50 | VDD — Core/IO supply voltage |
| 引脚 51 | RD0 — GPIO RD0 |
| 引脚 52 | RD1 — GPIO RD1 |
| 引脚 53 | RD2 — GPIO RD2 |
| 引脚 54 | RD3 — GPIO RD3 |
| 引脚 55 | RD4 — GPIO RD4 |
| 引脚 56 | RD5 — GPIO RD5 |
| 引脚 57 | RD6 — GPIO RD6 |
| 引脚 58 | RD7 — GPIO RD7 |
| 引脚 59 | VSS — Ground |
| 引脚 60 | VDD — Core/IO supply voltage |
| 引脚 61 | RD8 — GPIO RD8 |
| 引脚 62 | RD9 — GPIO RD9 |
| 引脚 63 | RD10 — GPIO RD10 |
| 引脚 64 | RD11 — GPIO RD11 |
| 引脚 65 | RD12 — GPIO RD12 |
| 引脚 66 | RD13 — GPIO RD13 |
| 引脚 67 | RD14 — GPIO RD14 |
| 引脚 68 | RD15 — GPIO RD15 |
| 引脚 69 | VSS — Ground |
| 引脚 70 | VDD — Core/IO supply voltage |
| 引脚 71 | RE0 — GPIO RE0 |
| 引脚 72 | RE1 — GPIO RE1 |
| 引脚 73 | RE2 — GPIO RE2 |
| 引脚 74 | RE3 — GPIO RE3 |
| 引脚 75 | RE4 — GPIO RE4 |
| 引脚 76 | RE5 — GPIO RE5 |
| 引脚 77 | RE6 — GPIO RE6 |
| 引脚 78 | RE7 — GPIO RE7 |
| 引脚 79 | VSS — Ground |
| 引脚 80 | VDD — Core/IO supply voltage |
| 引脚 81 | RF0 — GPIO RF0 |
| 引脚 82 | RF1 — GPIO RF1 |
| 引脚 83 | RF2 — GPIO RF2 |
| 引脚 84 | RF3 — GPIO RF3 |
| 引脚 85 | RF4 — GPIO RF4 |
| 引脚 86 | RF5 — GPIO RF5 |
| 引脚 87 | RF6 — GPIO RF6 |
| 引脚 88 | RF7 — GPIO RF7 |
| 引脚 89 | VSS — Ground |
| 引脚 90 | VDD — Core/IO supply voltage |
| 引脚 91 | RF8 — GPIO RF8 |
| 引脚 92 | RF9 — GPIO RF9 |
| 引脚 93 | RF10 — GPIO RF10 |
| 引脚 94 | RF11 — GPIO RF11 |
| 引脚 95 | RF12 — GPIO RF12 |
| 引脚 96 | RF13 — GPIO RF13 |
| 引脚 97 | RF14 — GPIO RF14 |
| 引脚 98 | RF15 — GPIO RF15 |
| 引脚 99 | VSS — Ground |
| 引脚 100 | VDD — Core/IO supply voltage |
| 引脚 101 | RG0 — GPIO RG0 |
| 引脚 102 | RG1 — GPIO RG1 |
| 引脚 103 | RG2 — GPIO RG2 |
| 引脚 104 | RG3 — GPIO RG3 |
| 引脚 105 | RG4 — GPIO RG4 |
| 引脚 106 | RG5 — GPIO RG5 |
| 引脚 107 | RG6 — GPIO RG6 |
| 引脚 108 | RG7 — GPIO RG7 |
| 引脚 109 | VSS — Ground |
| 引脚 110 | VDD — Core/IO supply voltage |
| 引脚 111 | RG8 — GPIO RG8 |
| 引脚 112 | RG9 — GPIO RG9 |
| 引脚 113 | RG10 — GPIO RG10 |
| 引脚 114 | RG11 — GPIO RG11 |
| 引脚 115 | RG12 — GPIO RG12 |
| 引脚 116 | RG13 — GPIO RG13 |
| 引脚 117 | RG14 — GPIO RG14 |
| 引脚 118 | RG15 — GPIO RG15 |
| 引脚 119 | VSS — Ground |
| 引脚 120 | VDD — Core/IO supply voltage |
| 引脚 121 | RH0 — GPIO RH0 / DDR2_DQ0 alt |
| 引脚 122 | RH1 — GPIO RH1 / DDR2_DQ1 alt |
| 引脚 123 | RH2 — GPIO RH2 / DDR2_DQ2 alt |
| 引脚 124 | RH3 — GPIO RH3 / DDR2_DQ3 alt |
| 引脚 125 | RH4 — GPIO RH4 / DDR2_DQ4 alt |
| 引脚 126 | RH5 — GPIO RH5 / DDR2_DQ5 alt |
| 引脚 127 | RH6 — GPIO RH6 / DDR2_DQ6 alt |
| 引脚 128 | RH7 — GPIO RH7 / DDR2_DQ7 alt |
| 引脚 129 | VSS — Ground |
| 引脚 130 | VDD — Core/IO supply voltage |
| 引脚 131 | RH8 — GPIO RH8 / DDR2_DQ8 alt |
| 引脚 132 | RH9 — GPIO RH9 / DDR2_DQ9 alt |
| 引脚 133 | RH10 — GPIO RH10 / DDR2_DQ10 alt |
| 引脚 134 | RH11 — GPIO RH11 / DDR2_DQ11 alt |
| 引脚 135 | RH12 — GPIO RH12 / DDR2_DQ12 alt |
| 引脚 136 | RH13 — GPIO RH13 / DDR2_DQ13 alt |
| 引脚 137 | RH14 — GPIO RH14 / DDR2_DQ14 alt |
| 引脚 138 | RH15 — GPIO RH15 / DDR2_DQ15 alt |
| 引脚 139 | VSS — Ground |
| 引脚 140 | VDD — Core/IO supply voltage |
| 引脚 141 | RJ0 — GPIO RJ0 / DDR2_CK alt |
| 引脚 142 | RJ1 — GPIO RJ1 / DDR2_CKn alt |
| 引脚 143 | RJ2 — GPIO RJ2 / DDR2_CKE alt |
| 引脚 144 | RJ3 — GPIO RJ3 / DDR2_CSn alt |
| 引脚 145 | RJ4 — GPIO RJ4 / DDR2_RASn alt |
| 引脚 146 | RJ5 — GPIO RJ5 / DDR2_CASn alt |
| 引脚 147 | RJ6 — GPIO RJ6 / DDR2_WEn alt |
| 引脚 148 | RJ7 — GPIO RJ7 / DDR2_BA0 alt |
| 引脚 149 | VSS — Ground |
| 引脚 150 | VDD — Core/IO supply voltage |
| 引脚 151 | RJ8 — GPIO RJ8 / DDR2_BA1 alt |
| 引脚 152 | RJ9 — GPIO RJ9 / DDR2_A0 alt |
| 引脚 153 | RJ10 — GPIO RJ10 / DDR2_A1 alt |
| 引脚 154 | RJ11 — GPIO RJ11 / DDR2_A2 alt |
| 引脚 155 | RJ12 — GPIO RJ12 / DDR2_A3 alt |
| 引脚 156 | RJ13 — GPIO RJ13 / DDR2_A4 alt |
| 引脚 157 | RJ14 — GPIO RJ14 / DDR2_A5 alt |
| 引脚 158 | RJ15 — GPIO RJ15 / DDR2_A6 alt |
| 引脚 159 | VSS — Ground |
| 引脚 160 | VDD — Core/IO supply voltage |
| 引脚 161 | RK0 — GPIO RK0 / DDR2_A7 alt |
| 引脚 162 | RK1 — GPIO RK1 / DDR2_A8 alt |
| 引脚 163 | RK2 — GPIO RK2 / DDR2_A9 alt |
| 引脚 164 | RK3 — GPIO RK3 / DDR2_A10 alt |
| 引脚 165 | RK4 — GPIO RK4 / DDR2_A11 alt |
| 引脚 166 | RK5 — GPIO RK5 / DDR2_A12 alt |
| 引脚 167 | RK6 — GPIO RK6 / DDR2_A13 alt |
| 引脚 168 | RK7 — GPIO RK7 / DDR2_DQM0 alt |
| 引脚 169 | VSS — Ground |
| 引脚 170 | VDD — Core/IO supply voltage |
| 引脚 171 | RK8 — GPIO RK8 / DDR2_DQM1 alt |
| 引脚 172 | RK9 — GPIO RK9 |
| 引脚 173 | RK10 — GPIO RK10 |
| 引脚 174 | RK11 — GPIO RK11 |
| 引脚 175 | VSS — Ground |
| 引脚 176 | VDD — Core/IO supply voltage |
典型应用
PIC32MZ2025DAS176-V/2J 适用于 6 应用s: Industrial HMI Panels, Automotive Infotainment Cluster, Point-of-Sale Terminals, Building Automation Controllers, Medical Patient Monitors, Smart Appliance Control Boards.
Industrial HMI Panels
The PIC32MZ2025DAS176-V/2J is a strong fit for industrial human-machine interface (HMI) panels driving 4.3 to 7 inch WVGA TFT displays. Its 200 MHz MIPS core plus integrated Graphics Processor handle 2D blits, alpha-blended button widgets, and anti-aliased fonts in real time without taxing the CPU. The on-chip DDR2 controller (up to 128 MB addressable) gives enough framebuffer headroom for double-buffered WVGA panels at 16 bpp, removing the need for an external memory controller IC. Two CAN 2.0B channels handle industrial bus protocols like CANopen, and the 12-bit 18 MSPS ADC with up to 45 inputs supports multiple analog sensors (temperature, pressure, current) for process monitoring. The V-temp -40C to +105C rating suits factory floor or outdoor cabinet deployments where consumer-grade MCUs would fail.
推荐
Automotive Infotainment Cluster
The PIC32MZ2025DAS176-V/2J powers next-generation automotive instrument clusters and entry-level infotainment head units that demand graphical richness without a full MPU + Linux stack. Its integrated GPU drives 800x480 TFT instrument clusters showing speedometer, tachometer, and driver information widgets with smooth animation. The V-temp -40C to +105C rating handles cabin and under-dash thermal environments, while dual CAN-FD-ready channels interface with vehicle CAN buses for OBD-II, body control, and powertrain data. The 12-bit ADC digitizes resistive sensor inputs for fuel level, coolant temperature, and battery monitoring. Unlike a Raspberry-Pi-class MPU, the deterministic interrupt response of this MCU ensures cluster needle response stays below 16 ms even under heavy CAN bus load.
推荐
Point-of-Sale Terminals
POS terminals benefit from the PIC32MZ2025DAS176-V/2J combination of graphical display capability, secure connectivity, and real-time peripheral control. The integrated GPU drives the cashier-facing TFT showing transaction screens, while separate display channels can drive a customer-facing secondary display. The HS USB 2.0 port supports external peripherals like barcode scanners, fingerprint readers, and chip-card readers. Ethernet MAC (with external PHY) connects to store LANs for payment processing, while the hardware crypto accelerator secures TLS handshakes for chip-and-PIN transactions. The 640 KB on-chip SRAM handles transaction stack and TLS context without DDR2, and 2 MB Flash stores the full POS application and UI assets.
推荐
Building Automation Controllers
Building automation controllers for HVAC, lighting, and access systems use the PIC32MZ2025DAS176-V/2J to consolidate multiple subsystems on a single MCU. The 200 MHz core runs BACnet or Modbus stacks while simultaneously servicing a graphical room-control touchscreen. Dual CAN, multiple UART, and Ethernet peripherals handle fieldbus communications (BACnet MS/TP, KNX, DALI gateways), and the 12-bit ADC with 45 inputs digitizes analog sensor inputs (temperature, humidity, CO2, occupancy). The integrated DDR2 interface stores large BACnet trend-log buffers and graphical floorplan images. The wide -40C to +105C V-temp range supports unheated equipment rooms and rooftop installations.
推荐
Medical Patient Monitors
Bedside patient monitors and portable diagnostic devices leverage the PIC32MZ2025DAS176-V/2J to drive multi-waveform TFT displays showing ECG, SpO2 plethysmograph, respiration, and blood pressure trends in real time. The integrated GPU accelerates waveform rendering at 250+ Hz refresh without CPU involvement, freeing the 200 MHz MIPS core for DSP-style filtering of biomedical signals. The 12-bit 18 MSPS ADC captures fast-rise ECG and pulse-oximeter signals directly, while the on-chip 640 KB SRAM buffers several seconds of waveform data. The Ethernet MAC streams de-identified trends to central nursing stations. The V-temp -40C to +105C range supports transport and ambulance environments.
推荐
Smart Appliance Control Boards
High-end smart appliances (premium refrigerators, induction cooktops, robotic vacuum bases) use the PIC32MZ2025DAS176-V/2J to drive graphical user interfaces on 5 to 10 inch capacitive-touch TFTs. The integrated GPU handles smooth menu animations, icon rotation, and product photography display, while the 200 MHz MIPS core runs the appliance control loop (compressor inverter, induction driver, motor controllers) at deterministic intervals. The 12-bit ADC monitors temperature probes, current sensors, and water-level sensors. Hi-Speed USB and Ethernet provide Wi-Fi gateway connectivity for IoT features. The 176-pin LQFP and 2 MB Flash simplify long-life BOM maintenance compared to MPU + external Flash designs.
推荐
推荐产品汇总
工程参考数据： PIC32MZ2025DAS176-V/2J ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC32MZ2025DAS176T-V/2J | PIC32MZ2025DAL176-I/2J | PIC32MZ2025DAK176-V/2J | PIC32MZ2025DAH176-I/2J | PIC32MZ2025DAG176-I/2J | PIC32MZ2025DAK176T-V/2J |
|---|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | MIPS32 microAptiv 200 MHz | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical |
| Program Flash | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Operating Temperature | -40C to +105C (V-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) |
| Graphics Controller / GPU | Yes (integrated) | Yes | Yes | Yes | Yes | Yes | Yes |
| DDR2 Controller | Yes (16-bit, up to 128 MB) | Yes | Yes | Yes | Yes | Yes | Yes |
| Hi-Speed USB | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Packaging Format | Tray | Tape & Reel | Tray | Tray | Tray | Tray | Tape & Reel |
关键差异点
- V-temp grade for harsh environments （对比 PIC32MZ2025DAL176-I/2J)
- Largest Flash in 176-LQFP DA family （对比 PIC32MZ1025DAS176T-V/2J)
- Integrated DDR2 controller eliminates external memory IC （对比 PIC32MX795F512L-80I/PF)
设计说明
The 176-pin LQFP at 0.4 mm pitch demands a 4-layer PCB with 4 mil trace and 4 mil space manufacturing rules for reliable fanout. Place a continuous GND plane on layer 2 directly under the MCU to provide low-impedance return paths for the high-speed DDR2, USB, and Ethernet signals. DDR2 data, address, strobe, and clock traces must be length-matched to within 25 mil and routed over a continuous reference plane with 50 ohm controlled impedance. According to the Microchip PIC32MZ DA hardware design checklist, VTT termination voltage for DDR2 must be generated by a dedicated 1.0 A LDO and not shared with other analog rails.
Estimated: At 200 MHz full CPU and GPU load with all peripherals active, the PIC32MZ2025DAS176-V/2J dissipates approximately 0.8 W to 1.2 W. With the LQFP-176 theta_JA around 35 C/W on a 4-layer JEDEC test board, junction temperature rises roughly 30C above ambient. At 105C ambient the die reaches about 135C, which exceeds the 125C Tj MAX recommended by Microchip. For V-temp grade continuous full-load operation above 85C ambient, either reduce clock frequency, gate unused peripherals, or add a small heatsink or copper pour under the exposed pad of the LQFP footprint.
Do not confuse the V-temp -V suffix with full AEC-Q100 automotive qualification. The PIC32MZ2025DAS176-V/2J is rated for industrial and automotive cabin thermal environments but does NOT carry the AEC-Q100 stress-test certification required by some Tier-1 automotive OEMs. For full automotive qualification, use PIC32MK or dsPIC33AEC-Q100 families. Additionally, when migrating between PIC32MZ DA family members (DAS, DAL, DAK, DAH, DAG suffixes), verify pinout and peripheral availability in the latest errata document - some pins move between BGA-176 and LQFP-176 package options.
合规信息
RoHS compliant per Microchip product page. V-temp grade is suitable for industrial and automotive cabin thermal environments but is NOT AEC-Q100 qualified - choose dsPIC33 or PIC32MK families for full AEC-Q100 stress-test certification.
