RTAX2000S-1CQ352PROTO - Rad-Tolerant FPGA 2M Gates | Microchip
料号： RTAX2000S-1CQ352PROTO ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
RTAX2000S-1CQ352PROTO 概述
A radiation-tolerant FPGA is a field-programmable gate array engineered to survive and operate reliably in space-flight radiation environments, where total ionizing dose (TID) and single-event effects would degrade or destroy standard commercial silicon. Within the power-management hierarchy of avionics electronics, these devices occupy the top reliability tier above standard and military-grade FPGAs, sitting in the broader taxonomy of programmable logic: FPGA -> radiation-tolerant FPGA -> space-grade programmable logic IC.
Key differentiating features of the RTAX-S family include low-power operation, a true single-chip form factor (no configuration PROM required at startup), and live-at-power-up behavior enabled by antifuse programmability. Unlike SRAM-based FPGAs, the antifuse architecture is one-time programmable, so configuration data is inherently immune to configuration upsets and the device is functional immediately when power is applied - a critical property for spacecraft that cannot tolerate a configuration reload cycle.
Architecturally, the RTAX2000S is fabricated in a CMOS process and organizes its ~2 million gates across logic modules, embedded SRAM blocks, and I/O clusters. Designers implement radiation-hardening-by-design techniques at the system level, typically combining the RTAX-S fabric with external triple-module-redundancy (TMR) schemes supported by Microchip's Libero design suite and Hi-Rel mitigation flows.
Typical applications include satellite payload processing, spacecraft bus control, telemetry and telecommand interfaces, and launch-vehicle avionics - anywhere complex logic must operate for years in orbit. The PROTO suffix denotes engineering/prototype hardware intended for design development and system validation rather than flight lots.
A key design consideration: PROTO devices must not be substituted for qualified flight units in final flight hardware; flight programs should transition to the corresponding V (flight) suffix part. This page consolidates verified specifications, drop-in family alternatives, and procurement guidance beyond what distributor listings typically show.
直接替换替代料： RTAX2000S-1CQ352PROTO ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： RTAX2000S-1CQ352PROTO （相同外形与封装尺寸） ——差异在于 Package, Configuration, Equivalent System Gates, Logic Cells, Embedded Memory.
快速对比工具——选择替代料号进行并排对比：
RTAX2000SL-1CQ352PROTO
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →RTAX2000S-1CQ352V
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →RTAX2000D-1CQ352B
✅ 直接替换✓ 有现货
$3120 / 个
查看数据手册 →RTAX2000D-1CQ352V
✅ 直接替换✓ 有现货
$3950 / 个
查看数据手册 →RTAX4000SL-1CQ352V
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3600 / 个
查看数据手册 →RTAX4000SL-CQ352PROTO
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
联系询价
查看数据手册 →RTAX2000S-1CQ352PROTO 最大额定值与电气特性
| Family | RTAX-S Radiation-Tolerant FPGA |
| Series | RTAX2000S |
| Configurable Logic Blocks (CLBs) | 21504 |
| Equivalent System Gates | 2000000 |
| Process Technology | CMOS |
| Programmability Type | Antifuse (one-time programmable) |
| Configuration | Live at power-up, single chip |
| Speed Grade | -1 |
| Device Designation | PROTO (prototyping / engineering) |
| Temperature Grade | C (commercial) |
| 封装 | CQFP352 (ceramic quad flat pack, 352 leads) |
| 安装类型 | Surface Mount |
| Radiation Tolerance | Radiation-tolerant (space-flight qualified family) |
RTAX2000S-1CQ352PROTO cqfp352 (ceramic quad flat pack, 352 leads) 引脚配置指南
RTAX2000S-1CQ352PROTO（cqfp352 (ceramic quad flat pack, 352 leads) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： RTAX2000S-1CQ352PROTO.
请参阅 数据手册 以查看完整引脚配置。
典型应用
RTAX2000S-1CQ352PROTO 适用于 6 应用s: Satellite Payload Processing, Spacecraft Bus Control, Telemetry and Telecommand Interfaces, Launch Vehicle Avionics, Space Instrumentation and Science Payloads, New Space / Small Satellite Development.
Satellite Payload Processing
The RTAX2000S-1CQ352PROTO fits satellite payload processing because its 21,504 CLB / ~2M-gate capacity accommodates payload data formatting, compression preprocessing, and interface bridging, while the antifuse fabric delivers live-at-power-up operation with no configuration memory to upset. In a typical payload chain, the FPGA sits between the payload sensor or transceiver and the onboard computer, implementing LVDS/CMOS interface glue, FIFOs, and protocol framing. Because the device is PROTO-grade hardware, it is ideal for payload engineering models and EM (engineering model) units during integration and test; flight builds should migrate to the V-suffix flight part in the same CQFP352 footprint, preserving the PCB layout and design netlist.
推荐
Spacecraft Bus Control
Spacecraft bus controllers benefit from the RTAX2000S-1CQ352PROTO's single-chip, live-at-power-up antifuse architecture: attitude control interfaces, power distribution switching logic, and mode-control state machines are active the instant power is applied, with no configuration reload window. The ~2M equivalent gate capacity hosts multiple independent bus functions - e.g., MIL-STD-1553-style interface glue, discrete I/O conditioning, and watchdog functions - in one radiation-tolerant device. Low static power matters on battery-limited launch and eclipse phases, and the ceramic CQFP352 package supports the solder joints and thermal cycling of launch environments. Use the PROTO device for bus avionics engineering models, then transition designs unchanged to the RTAX2000S-1CQ352V flight unit.
推荐
Telemetry and Telecommand Interfaces
Telemetry/telecommand (TM/TC) front ends demand predictable, deterministic logic that survives total ionizing dose and single-event effects - exactly the RTAX-S design point. The RTAX2000S-1CQ352PROTO implements frame synchronizers, encoders/decoders, and housekeeping multiplexers across its 21,504 CLBs, while its antifuse configuration eliminates configuration-upset-driven link drops. The CQFP352 ceramic package provides the lead count needed for redundant TM/TC channel interfaces and cross-strapping. Because the PROTO part matches the flight CQFP352V footprint, ground-station test jigs and EGSE built around the PROTO device transfer directly to flight hardware, shortening verification cycles for telemetry chains and command decoders.
推荐
Launch Vehicle Avionics
Launch-vehicle avionics require logic that is guaranteed alive at power-up within seconds of battery activation and tolerant of the high-vibration, radiation-rich ascent environment. The RTAX2000S-1CQ352PROTO's antifuse fabric is inherently immune to configuration upsets, and its CMOS construction keeps power budgets compatible with vehicle battery rails. Typical roles include sequencer control, stage-separation interlock logic, and sensor data aggregation feeding flight computers. The ceramic CQFP352 package provides robust leaded attachment for high-shock environments. PROTO-class devices support stage avionics integration benches and hardware-in-the-loop testing; production stages use the identically-footprinted flight-grade RTAX2000S-1CQ352V, reusing both PCB and design assets.
推荐
Space Instrumentation and Science Payloads
Science instruments - imagers, spectrometers, particle detectors - use the RTAX2000S-1CQ352PROTO as detector readout and data-path conditioning logic. The ~2M-gate fabric accommodates correlated double sampling control, high-speed serial formatting, and instrument sequencing, while the radiation-tolerant CMOS process sustains multi-year missions through belt crossings and solar events. Live-at-power-up behavior simplifies instrument safe-mode design: the FPGA is functional before software boots, enabling autonomous fault response. Engineering-model instruments programmed on the PROTO device validate timing and data integrity; identical designs load into the same-footprint RTAX2000S-1CQ352V flight device, so calibration results from the EM instrument carry over to flight hardware with no board respin.
推荐
New Space / Small Satellite Development
Small-sat and cubesat programs increasingly adopt RTAX-S FPGAs for missions previously served by commercial parts, and the PROTO designation makes the RTAX2000S-1CQ352PROTO attractive for rapid development cycles. Its 21,504 CLB capacity covers onboard data handling, ADCS interface logic, and payload prototyping within one chip, while antifuse live-at-power-up operation removes bootloader complexity from flight software teams. The -1 speed grade suits the moderate clock rates typical of small-sat data handling, keeping power draw low. Teams can validate boards and FPGA designs on PROTO units, then order the pin-identical RTAX2000S-1CQ352V for flight lots, de-risking schedule without redesigning the CQFP352 PCB footprint.
推荐
推荐产品汇总
工程参考数据： RTAX2000S-1CQ352PROTO ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | RTAX2000SL-1CQ352PROTO | RTAX2000S-1CQ352V | RTAX2000D-1CQ352B | RTAX4000SL-1CQ352V |
|---|---|---|---|---|---|
| Package | CQFP352 | CQFP352 - same | CQFP352 - same | CQFP352 - same | CQFP352 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Capacity | 21504 CLBs / ~2M gates | RTAX2000-class (~2M gates) | 21504 CLBs / ~2M gates | RTAX2000-class (~2M gates) | RTAX4000-class (higher density) |
| Programmability | Antifuse (OTP), live at power-up | Antifuse (OTP) | Antifuse (OTP) | Flash-based (reprogrammable) | Antifuse (OTP) |
| Device Flow | PROTO (engineering) | PROTO (engineering) | V (flight-grade) | B (flight flow variant) | V (flight-grade) |
| Speed Grade | -1 | -1 | -1 | -1 | -1 |
| Temperature Grade | C (commercial) | C | V flow per Microchip screening | B flow per Microchip screening | V flow per Microchip screening |
| Radiation Tolerance | Radiation-tolerant (RTAX-S family) | Radiation-tolerant (RTAX-SL) | Radiation-tolerant (RTAX-S) | Radiation-tolerant (RTAX-D) | Radiation-tolerant (RTAX-SL) |
关键差异点
- True single-chip, live-at-power-up operation （对比 RTAX2000D-1CQ352B)
- Direct flight-grade migration path （对比 RTAX2000S-1CQ352V)
- Trade-off: one-time programmable （对比 RTAX2000D-1CQ352B)
设计说明
Do not install RTAX2000S-1CQ352PROTO devices in flight hardware. The PROTO designation identifies prototype/engineering flow units for board bring-up, design validation, and EGSE development. Flight builds must use the corresponding flight-flow device (e.g., RTAX2000S-1CQ352V), which shares the same die and CQFP352 footprint so no PCB respin is needed. Mixing PROTO units into flight lots is a common audit finding in hi-rel programs.
Because RTAX-S antifuse FPGAs are one-time programmable, timing closure must be fully verified in simulation and static timing analysis before programming. Use Microchip's Libero SoC design suite timing reports for the -1 speed grade and budget margin for the radiation-tolerant derating factors specified in the RTAX-S/SL datasheet. There is no opportunity to re-fit a design after programming a failed-timing device, so over-constrain critical clock domains during implementation.
The CQFP352 ceramic package has leads on all four sides and is surface mounted; use a footprint matching the JEDEC-style CQFP352 land pattern from the Microchip RTAX-S/SL datasheet package section. For space applications, consider lead-forming and underfill practices appropriate to launch vibration, and route controlled-impedance signals on inner layers with solid reference planes to support the I/O and core supply integrity of the -1 speed grade design.
合规信息
Hi-rel space-grade ceramic package devices typically have special compliance declarations; obtain RoHS/exemption status directly from Microchip hi-rel product documentation.
