S9S08DZ96F2MLH - 8-bit S08 MCU, 96KB Flash, CAN | NXP
料号： S9S08DZ96F2MLH ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $10.35 | $10.35 |
| 10 | $9.45 | $94.50 |
| 100 | $8.6 | $860.00 |
| 500 | $7.9 | $3,950.00 |
| 1,000 | $7.25 | $7,250.00 |
S9S08DZ96F2MLH 概述
An 8-bit microcontroller is a single-chip computer that integrates a processor core, program flash, RAM, EEPROM, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the embedded systems hierarchy, the S08DZ family sits in the cost-sensitive 8-bit MCU segment, positioned below 16-bit and 32-bit MCUs but differentiated by integrated Controller Area Network (CAN) connectivity, a feature historically reserved for larger devices.
Key features include the industry-first integration of embedded CAN, embedded EEPROM, and on-chip emulation/debug in an 8-bit MCU family. The 96 KB flash supports field reprogramming, while the 2 KB EEPROM retains calibration data through power cycles without external memory. The 40 MHz S08 core delivers efficient execution for automotive body, gateway, and node applications. Automotive qualification and the -40C to +125C temperature range support underhood and harsh-environment deployments.
Architecturally, the S08 core is an enhanced, fully static HCS08 CPU with a background debug module that provides non-intrusive, on-chip emulation without consuming pin or memory resources. This reduces development cost by eliminating the need for bond-out or emulation chips in automotive tier-1 tooling.
Typical applications include automotive body control modules, seat and door controllers, HVAC nodes, CAN-gateway sub-nodes, and industrial CAN networks where a low-cost 8-bit device must communicate on a CAN 2.0 bus.
Design consideration: verify flash and EEPROM endurance requirements against your application write budget, and confirm the exact 64-pin LQFP pin assignment against the NXP reference manual before layout.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： S9S08DZ96F2MLH ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： S9S08DZ96F2MLH （相同外形与封装尺寸） ——差异在于 Package, RAM, Core Processor, Instruction Set, Operating Temperature.
快速对比工具——选择替代料号进行并排对比：
MC9S08DZ96CLH
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.21 / 个
查看数据手册 →MC9S08DZ32AMLH
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
联系询价
查看数据手册 →MC9S08DV96CLF
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$5.94 / 个
查看数据手册 →S9S08DZ60F1CLH
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$5.95 / 个
查看数据手册 →S9S08DZ48F1CLH
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$0.8 / 个
查看数据手册 →S9S08DZ32F1MLF
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$4.21 / 个
查看数据手册 →S9S08DZ96F2MLH 最大额定值与电气特性
| Core | S08 (HCS08), 8-bit |
| Number of Cores | 1 |
| 最大时钟频率 | 40 MHz |
| Program Memory Size | 96 KB Flash |
| Data EEPROM Size | 2 KB |
| 工作温度范围 | -40C to +125C |
| CAN | Embedded CAN (CAN 2.0) |
| On-Chip Debug | On-chip emulation/debug (background debug) |
| 封装 | LQFP-64 (QFP 64, square, LFQFP) |
| Number of Terminals | 64 |
| Terminal Form | Gull Wing |
| 安装类型 | Surface Mount |
| Qualification | Automotive Qualified (AEC-Q100 grade per NXP S9S08DZ family) |
| Program Memory Width | 8 bit |
| Packaging | Tray |
S9S08DZ96F2MLH lqfp-64 (qfp 64, square, lfqfp) 引脚配置指南
S9S08DZ96F2MLH（lqfp-64 (qfp 64, square, lfqfp) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： S9S08DZ96F2MLH.
请参阅 数据手册 以查看完整引脚配置。
典型应用
S9S08DZ96F2MLH 适用于 6 应用s: Automotive Body Control Modules, CAN Gateway Sub-Nodes, HVAC and Climate Control Nodes, Seat and Door Module Controllers, Industrial CAN Sensor Nodes, Low-Cost Embedded CAN Development.
Automotive Body Control Modules
The S9S08DZ96F2MLH fits body control modules where dozens of switches, lamps, and motors must be monitored and driven over a CAN bus at minimal cost. Its embedded CAN controller removes the need for an external CAN peripheral IC, the 96 KB flash accommodates a full switch-monitoring and diagnostics firmware image, and the 2 KB EEPROM stores per-vehicle configuration and fault logs that survive battery disconnect. Automotive qualification and the -40C to +125C range cover passenger-compartment and near-engine mounting locations. With on-chip debug, tier-1 developers can iterate firmware in-system without bond-out hardware, shortening validation cycles in cost-sensitive body electronics programs.
推荐
CAN Gateway Sub-Nodes
In vehicles with multiple CAN buses, the S9S08DZ96F2MLH serves as a low-cost sub-node that filters, translates, and relays messages between a central gateway and local actuators. The 40 MHz S08 core provides adequate bandwidth for CAN 2.0 message handling, while the 96 KB flash holds protocol stacks for J1939-class or proprietary message sets. Embedded EEPROM retains node addressing and filtering tables across power cycles, and the on-chip debug interface supports in-vehicle reprogramming during development. Compared with 16-bit or 32-bit gateways, this 8-bit device cuts cost while keeping CAN connectivity integrated on the same die, reducing PCB area and component count.
推荐
HVAC and Climate Control Nodes
Automotive HVAC controllers benefit from the S9S08DZ96F2MLH's blend of EEPROM-backed calibration data, CAN connectivity for zone-request messages, and sufficient flash for actuator control and diagnostic code. The device monitors temperature sensor inputs, drives blower and blend-door motors through PWM or H-bridge drivers, and reports status on the vehicle CAN bus. Its -40C to +125C qualification covers under-dash and engine-bay sensor locations. The embedded EEPROM eliminates an external serial EEPROM component, trimming bill of materials - a meaningful saving across high-volume vehicle programs where every cent of electronics cost is scrutinized.
推荐
Seat and Door Module Controllers
Seat memory modules and door controllers use the S9S08DZ96F2MLH to read switch matrices, drive motor positions via relays or H-bridges, and exchange commands on LIN/CAN-style in-vehicle networks. The 2 KB EEPROM stores seat position presets and user profiles that must persist through battery removal - a core requirement NXP designed the embedded EEPROM for. The 96 KB flash leaves room for position encoding, stall detection, and anti-pinch firmware. Automotive qualification plus 125C support suits door-mounted electronics exposed to solar loading, and the 64-pin LQFP provides enough general-purpose I/O for a full switch matrix without external port expanders.
推荐
Industrial CAN Sensor Nodes
Beyond automotive, the S9S08DZ96F2MLH serves industrial CAN (CANopen-style) sensor and actuator nodes where an 8-bit MCU is sufficient and cost matters. The integrated CAN controller with the industrial -40C to +125C capability supports factory-floor installations, and the 2 KB EEPROM stores node IDs, scaling factors, and calibration constants per Device-profile conventions. The 96 KB flash accommodates a compact protocol stack plus sensor compensation algorithms. On-chip debug simplifies field tooling, and the widely available 64-LQFP footprint keeps second-source board layouts simple. For new industrial designs needing higher throughput, evaluate NXP's 32-bit Kinetis parts, but for pure CAN I/O nodes this 8-bit device remains economical.
推荐
Low-Cost Embedded CAN Development
The S9S08DZ96F2MLH is a strong training and prototyping platform for embedded CAN systems because NXP integrated on-chip emulation and background debug into the die - the industry first for an 8-bit CAN MCU family, per NXP's announcement. Developers can single-step, break, and trace without external bond-out pods, using only the single-wire background debug pin. The 96 KB flash supports repeated re-flashing during coursework or proof-of-concept work, while the 2 KB EEPROM demonstrates non-volatile parameter storage. University labs and small engineering teams can build complete CAN nodes - MCU, transceiver, and physical layer - on a two-layer board with this device.
推荐
推荐产品汇总
工程参考数据： S9S08DZ96F2MLH ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S08DZ96CLH | MC9S08DZ32AMLH | MC9S08DV96CLF | S9S08DZ60F1CLH | S9S08DZ48F1CLH |
|---|---|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit |
| Program Flash | 96 KB | 96 KB | 32 KB | 96 KB | 60 KB | 48 KB |
| Integrated CAN | Yes | Yes | Yes | Yes (DV series CAN variant) | Yes | Yes |
| Max Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Qualified | Yes | Yes | Yes | Yes | Yes | Yes |
关键差异点
- Largest flash in the 64-LQFP S08DZ drop-in family （对比 S9S08DZ60F1CLH)
- Embedded EEPROM eliminates external serial EEPROM （对比 MC9S08DV96CLF)
- Trade-off: 8-bit compute ceiling （对比 MK40DX64VLH7)
设计说明
Estimated: automotive modules must tolerate load-dump and cranking transients on the supply rail. The S9S08DZ96F2MLH requires a regulated supply within its datasheet VDD range - consult the NXP reference manual for exact limits (exact values not present in verified data). Use a qualified automotive LDO or SBC (e.g., MC33989 family) upstream, with bulk and ceramic decoupling at each VDD pin pair per the datasheet layout guidance. Add reverse-polarity and transient protection at the module input to meet OEM load-dump requirements.
Place 0.1 uF ceramic decoupling capacitors at every VDD/VSS pin pair of the 64-LQFP, as close to the pins as possible, and follow the NXP datasheet power-distribution recommendations. Route the CANRX/CANTX traces to the external transceiver (TJA1050-class) with short, matched runs and place the split termination per the transceiver datasheet. Keep the background debug pin accessible on a header or test pad - it is required for programming and on-chip emulation during production and field service.
Do not assume pin assignments from other S08 family variants: pin multiplexing on the 64-LQFP DZ96 differs from the DV and older HCS08 families. Always verify port-to-peripheral mapping in the NXP S08DZ reference manual before committing the layout. When migrating from 32 KB or 60 KB DZ variants to this 96 KB part, confirm flash page boundaries used by your bootloader, since erase-page organization can differ with memory size. EEPROM endurance is finite - budget write cycles in the calibration-update scheme.
合规信息
NXP lists the part as Active with environmental quality documentation available on the official product page; exact RoHS/REACH/lead-free status must be confirmed from the NXP environmental page for this orderable part number.
